AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

386-4650 PUMP GP-FUEL INJECTION PART OF 380-1776, 380-1777, 392-4113, 416-6081 ENGINE AR-PRIMARY AN ATTACHMENT 303.5E


FUEL SYSTEM
PUMP GP-FUEL INJECTION
SHUTOFF GP-MANUAL
TANK GP-FUEL
ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGING
BATTERY GP
CONTROL GP-ELECTRONIC
ELECTRONICS GP-COMMUNICATION
ELECTRONICS GP-MACHINE

MINI HYD EXCAVATOR 303.5E MINI HYD EXCAVATOR RSE
 303.5E Mini Hydraulic Excavator RSE00001-UP (MACHINE) SEBP6444 303.5E RSE   (2012)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
CAMSHAFT AS
386-6945 CAMSHAFT AS
NOZZLE GP-UNIT INJECTOR
386-4644 NOZZLE GP-UNIT INJECTOR
PUMP GP-FUEL INJECTION
386-4650 PUMP GP-FUEL INJECTION
 

#SEBP64440050
 

386-4650: PUMP GP-FUEL INJECTION

386-4650 PUMP GP-FUEL INJECTION
PART OF 380-1776, 380-1777, 392-4113, 416-6081 ENGINE AR-PRIMARY
AN ATTACHMENT
i04790216 SEBP6444
3864650 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 303.5E MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 383-0169 [2] BOLT  
2. 383-0177 [4] BOLT  
3. 383-0188 [2] BOLT  
4. 383-0199 [2] NUT-FLANGE  
5. 383-0208 [1] RING-SNAP  
6. 383-0279 [2] STUD  
7. 383-0280 [1] COVER-FUEL  
8. 383-0314 [1] ORIFICE AS  
9. 386-6942 B [1] SHIM (0.2-MM THK)  
10. 386-6943 B [1] SHIM (0.25-MM THK)  
11. 386-6944 B [1] SHIM (0.3-MM THK)  
12. 383-0487 [1] GASKET  
13. 386-6940 B [1] SHIM  
14. 386-6939 [1] PUMP AS-FUEL INJECTION  
14A. 383-0287 [1] SCREW  
14B. 383-0288 [1] PACKING  
15. 386-6945 Y [1] CAMSHAFT AS (FUEL INJECTION PUMP)  
16. 386-6947 [1] COLLAR  
17. 383-0550 [1] BALL BEARING  
18. 383-0560 [1] BOLT  
19. 386-6941 B [1] SHIM (0.175-MM THK)  
20. 383-0562 [2] GASKET  
21. 383-0577 [1] STOPPER (FUEL)  
22. 383-0252 [1] JOINT  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP64440051
 

378-2140: SHUTOFF GP-MANUAL

378-2140 SHUTOFF GP-MANUAL -ENGINE
PART OF 383-0640 INSTALLATION AR-ENGINE
i04589460 SEBP6444
3782140 SHUTOFF GP-MANUAL Parts scheme
  For full view, you need register

Parts for your 303.5E MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-7958 [2] SLEEVE-CABLE SPLICE  
2. 382-9349 [1] CABLE-LANYARD  
 

#SEBP64440052
 

367-0930: TANK & MTG GP-FUEL

367-0930 TANK & MTG GP-FUEL
PART OF 383-5953 CHASSIS AR
i04629823 SEBP6444
3670930 TANK & MTG GP-FUEL Parts scheme
  For full view, you need register

Parts for your 303.5E MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 265-8577 [1] SEAL  
2. 1P-4278 [2] CLAMP-HOSE  
3. 9D-7924 [2] MOUNTING AS  
4. 9M-7959 [2] CLAMP-HOSE  
5. 265-8575 [1] CAP AS-FUEL (LOCKABLE, VENTED)  
6. 265-8578 [2] MOUNT  
7. 265-8579 [1] STRAINER (TANK)  
8. 276-9302 [1] FILLER AS-FUEL (TANK)  
9. 367-1089 [1] PLATE AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
10. 367-1090 [1] BLOCK AS  
11. 367-1092 [1] VALVE (DRAIN, FUEL TANK)  
12. 367-1095 [1] TANK AS-FUEL  
13. 367-1096 [1] HOSE  
14. 367-1097 [1] FOAM  
15. 7X-0632 [2] WASHER-HARD (11X36X6-MM THK)  
16. 7X-7729 [7] WASHER (11X25X3-MM THK)  
17. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
18. 8T-4133 M [3] NUT (M10X1.5-THD)  
19. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
20. 8T-4182 M [2] BOLT (M10X1.5X45-MM)  
21. 8T-4226 [2] WASHER-PLATED (10.5X45X3-MM THK)  
22. 8T-6466 M [2] BOLT (M10X1.5X60-MM)  
23. 5P-1507 E HOSE (39-CM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP64440053
 

383-0134: ALTERNATOR GP-CHARGING

383-0134 ALTERNATOR GP-CHARGING
12-VOLT, 60-AMPERE
PART OF 380-1776, 380-1777, 392-4113, 416-6081 ENGINE AR-PRIMARY
AN ATTACHMENT
i04603452 SEBP6444
3830134 ALTERNATOR GP-CHARGING Parts scheme
  For full view, you need register

Parts for your 303.5E MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 383-0592 [1] ALTERNATOR AS (12-VOLT, 60-AMPERE)  
1A. 383-0323 [1] COLLAR  
1B. 383-0330 [1] NUT  
1C. 383-0344 [1] PULLEY-ALTERNATOR  
2. 383-0178 [1] BOLT  
3. 389-0705 [1] BOLT-FLANGE HEAD  
4. 383-0206 [1] LOCKWASHER  
5. 383-0195 [1] NUT-HEX  
 

#SEBP64440054
 

370-5345: BATTERY & WIRING GP

370-5345 BATTERY & WIRING GP -CANOPY
PART OF 383-5985, 383-5993 CANOPY AR
AN ATTACHMENT
i04725134 SEBP6444
3705345 BATTERY & WIRING GP Parts scheme
  For full view, you need register

Parts for your 303.5E MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1S-1150 [2] SPACER (0.391X0.5X0.19-IN THK)  
2. 3S-2093 [33] STRAP-CABLE  
3. 7K-1181 [7] STRAP-CABLE  
4. 111-4837 [5] CLIP  
5. 153-5656 [1] BATTERY (12-VOLT, MAINTENANCE FREE)  
6. 163-6795 [1] STRAP-CABLE  
7. 204-1611 [3] STRAP (DUAL)  
8. 232-7405 [1] BRACKET  
9. 251-1391 M [2] BOLT (M10X1.25X16-MM)  
10. 266-6935 [1] RELAY AS (12-VOLT)(MAIN)  
11. 266-7379 [3] STRAP-CABLE  
12. 267-4767 [1] CLAMP  
13. 267-4768 [2] ROD  
14. 282-2151 [1] GROMMET  
15. 298-0663 [1] CLIP (LADDER)  
16. 349-1812 [1] SWITCH AS-PRESSURE (PILOT OIL)  
  3J-1907 [1] SEAL-O-RING  
  108-7516 [1] FITTING  
  9X-3402 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [2] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  230-4011 [1] PLUG AS-CONNECTOR (2-PIN)  
  455-0704 [1] SEAL-CONNECTOR  
17. 458-0669 Y [1] HARNESS AS-CHASSIS (CANOPY)  
18. 370-5363 [1] CABLE AS-BATTERY (POSITIVE)  
  292-2893 E CONDUIT (10.1-MM ID)(80-CM)  
  5P-5675 BD WIRE (6-GA, BLACK)  
  9X-4519 [1] BOOT (RED)  
  8L-8413 [1] STRAP-CABLE (WHITE)  
  159-8049 E CABLE (00-GA, RED)(201-CM)  
  2L-8050 [1] TERMINAL-RING (6-GA, 1/4-IN SCREW)  
  3S-6049 [1] TERMINAL AS-BATTERY (POSITIVE)  
  1M-6119 [1] BOLT (5/16-18X1.375-IN)  
  1M-6120 [1] NUT (5/16-18-THD)  
19. 370-5366 [1] CABLE AS-BATTERY (NEGATIVE)  
  3S-6050 [1] TERMINAL AS-BATTERY (NEGATIVE)  
  1M-6119 [1] BOLT (5/16-18X1.375-IN)  
  1M-6120 [1] NUT (5/16-18-THD)  
  7N-5274 [1] COVER AS-TERMINAL (BLACK)  
  8L-8413 [1] STRAP-CABLE (WHITE)  
  159-8050 E CABLE (00-GA, BLACK)(33-CM)  
  311-8804 [1] TERMINAL  
20. 370-5367 [1] STRAP AS-GROUND  
21. 370-5372 [1] GROMMET  
22. 370-5375 [1] PLATE  
23. 376-9480 [1] SENDER AS-FUEL LEVEL  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  [1] GASKET  
24. 383-0342 [1] SENSOR (THERMOCOUPLE)  
25. 387-5260 [1] PLATE AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
  8T-3612 M [3] NUT-WELD (M8X1.25-THD)  
  8T-8874 M [1] NUT-WELD (M5X0.8-THD)  
  9X-2032 M [2] NUT-WELD (M4X0.7-THD)  
26. 095-0736 M [6] SCREW-MACHINE (M5X0.8X10-MM)  
27. 127-4839 M [2] BOLT (M10X1.25X25-MM)  
28. 132-5789 [1] CLIP (LADDER)  
29. 132-7551 [1] SPACER (11X19X6-MM THK)  
30. 150-4086 M [2] SCREW (M4X0.7X16-MM)  
31. 156-6175 [2] CLIP (LADDER)  
32. 174-5907 [2] CLIP (LOOP)  
33. 277-1873 [1] CLIP (LADDER)  
34. 2M-3432 [1] GROMMET  
35. 4B-4863 [2] WASHER (4.7X11X1.2-MM THK)  
36. 4P-7581 [1] CLIP (LADDER)  
37. 4P-8134 [2] CLIP (LADDER)  
38. 5C-2890 M [4] NUT (M6X1-THD)  
40. 5C-9553 M [2] BOLT (M6X1X16-MM)  
41. 5P-4115 [2] WASHER-HARD (7.2X19X2-MM THK)  
42. 5P-4116 [1] WASHER-HARD (8.8X20.5X2-MM THK)  
43. 7I-2272 M [1] BOLT (M5X0.8X12-MM)  
44. 8T-0328 [1] WASHER-HARD (5.5X10X1-MM THK)  
45. 8T-4121 [14] WASHER-HARD (11X21X2.5-MM THK)  
46. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
47. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
48. 8T-4171 M [1] BOLT (M6X1X12-MM)  
49. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
50. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
51. 8T-4200 M [6] BOLT (M8X1.25X16-MM)  
52. 8T-4224 [7] WASHER-HARD (8.8X16X2-MM THK)  
53. 8T-8799 [2] BOOT (RED)  
54. 9M-8406 [1] CLIP (LOOP)  
55. 9X-8256 [3] WASHER (6.6X12X2-MM THK)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP64440055
 

156-6155: CONTROL GP-UNPROGRAMMED

156-6155 CONTROL GP-UNPROGRAMMED
PART OF 207-5262 ELECTRONICS GP-MACHINE
FIELD REPLACEMENT ORDER @@@@@207-5262@@@@@
AN ATTACHMENT
i03997393 SEBP6444
1566155 CONTROL GP-UNPROGRAMMED Parts scheme
  For full view, you need register

Parts for your 303.5E MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-6315 [1] STRAP AS-GROUND  
  2L-8078 [1] TERMINAL-RING (14-GA TO 16-GA, 5/16-IN SCREW)  
2. 184-2472 [1] SCREW-PAN HEAD (8-32X0.375-IN)  
3. 134-4126 [1] WASHER (4.52X8.28X0.76-MM THK)  
 

#SEBP64440056
 

308-6182: ELECTRONICS GP-COMMUNICATION

308-6182 ELECTRONICS GP-COMMUNICATION -PRODUCT LINK
PART OF 392-2833 WIRING GP-COMMUNICATION
AN ATTACHMENT
i04580510 SEBP6444
  For full view, you need register

Parts for your 303.5E MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  454-0437 [1] CONTROL GP-COMMUNICATION (PRODUCT LINK, JAPAN)  
 

#SEBP64440057
 

207-5262: ELECTRONICS GP-MACHINE

207-5262 ELECTRONICS GP-MACHINE -SECURITY
PART OF 392-2836 INSTALLATION GP-SECURITY
FIELD REPLACEMENT FOR @@@@@156-6155@@@@@
AN ATTACHMENT
i04026251 SEBP6444
2075262 ELECTRONICS GP-MACHINE Parts scheme
  For full view, you need register

Parts for your 303.5E MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 156-6155 Y [1] CONTROL GP-UNPROGRAMMED (SECURITY)  
2. 243-6464 [1] SOFTWARE GP-MACHINE (SECURITY)  
3. 206-5162 [2] KEY AS-ELECTRONIC (SECURITY)(YELLOW)  
    -OR-
  206-5165 [2] KEY AS-ELECTRONIC (SECURITY)(GRAY)  
4. 219-6314 [2] KEY RING (IDENTIFICATION)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP64440058
 

392-4915: ELECTRONICS GP-MACHINE

392-4915 ELECTRONICS GP-MACHINE
PART OF 383-5945 COMMON AR
i05001164 SEBP6444
  For full view, you need register

Parts for your 303.5E MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  510-7680 H [1] SOFTWARE GP-MACHINE  
    -OR-
  510-7679 L [1] SOFTWARE GP-MACHINE  
  H   WITH CANOPY
  L   WITH CAB
 

#SEBP64440059
 

392-4938: ELECTRONICS GP-MONITOR

392-4938 ELECTRONICS GP-MONITOR
PART OF 383-5945 COMMON AR
i04958271 SEBP6444
  For full view, you need register

Parts for your 303.5E MINI HYD EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  392-4768 [1] SOFTWARE GP-MONITOR  
    -OR-
  416-4255 [1] SERVICE GP-MONITOR  
    (OPTIONAL SERVICE REPLACEMENT) (INCLUDES CONTROL GP & SOFTWARE)
 

Information:

Operation and Maintenance Manual
Engine Valve Lash - Check
303.5E CR, 304E CR, 305E CR and 305.5E CR Mini Hydraulic Excavators
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Specifications
Fuel Injection Nozzles
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Fuel Injection Pump
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Reuse And Salvage Guidelines
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Testing and Adjusting
Fuel Injection Nozzle - Test
C1.7, C1.8, and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Fuel Injection Timing - Check
C1.7, C1.8, and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Fuel Injection Pump - Test
C1.7, C1.8, and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Disassembly and Assembly
Fuel Injection Nozzles - Remove
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Fuel Injection Nozzles - Install
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Fuel Injection Pump - Remove
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Fuel Injection Pump - Install
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Fuel Injection Pump - Remove
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Fuel Injection Pump - Install
C1.7, C1.8 and C2.4 Tier 4 Interim and EU Stage 3A Engines for Caterpillar Built Machines
Service Magazine
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14

Caterpillar Parts SIS Catalog 303.5E :

NOZZLE GP-UNIT INJECTOR
386-4644 NOZZLE GP-UNIT INJECTOR
LINES GP-FUEL INJECTION
386-4640 LINES GP-FUEL INJECTION
LINES GP-FUEL FILTER
379-4728 LINES GP-FUEL FILTER
LINES GP-FUEL
386-4639 LINES GP-FUEL
GOVERNOR GP
386-4635 GOVERNOR GP
FILTER GP-WATER SEP & FUEL
144-9962 FILTER GP-WATER SEP & FUEL
CONTROL GP-GOVERNOR
380-6300 CONTROL GP-GOVERNOR
CAMSHAFT AS
386-6945 CAMSHAFT AS
SHUTOFF GP-MANUAL
378-2140 SHUTOFF GP-MANUAL
TANK & MTG GP-FUEL
367-0930 TANK & MTG GP-FUEL
ALTERNATOR GP-CHARGING
383-0134 ALTERNATOR GP-CHARGING
BATTERY & WIRING GP
370-5345 BATTERY & WIRING GP
CONTROL GP-UNPROGRAMMED
156-6155 CONTROL GP-UNPROGRAMMED
308-6182 ELECTRONICS GP-COMMUNICATION
ELECTRONICS GP-MACHINE
207-5262 ELECTRONICS GP-MACHINE
392-4915 ELECTRONICS GP-MACHINE
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.