514-0621 COVER GP-ACCESS S/N LC51-UP AN ATTACHMENT C4.4 GENERATOR SET

BASIC ENGINE

COVER GP-ENGINE

0. 514-0621 COVER GP-A

VALVE MECHANISM GP

1. 304-5574 COVER GP-V

CRANKSHAFT GP

2. 359-0716 CRANKSHAFT
3. 359-0716 CRANKSHAFT
4. 381-2246 CRANKSHAFT
5. 381-2246 CRANKSHAFT
6. 381-2246 CRANKSHAFT
7. 381-2316 CRANKSHAFT
8. 381-2316 CRANKSHAFT
9. 381-2316 CRANKSHAFT
0. INFORMATION

GENERATOR SET C4.4 GENERATOR SET LC5
C4.4 (D80, D100) Generator Set LC500001-UP SEBP6481 C4.4 LC5 (2013)

BASIC ENGINE

COVER GP-ENGINE

514-0621 COVER GP-ACCESS

#SEBP64810010

514-0621: COVER GP-ACCESS

COVER GP-ACCESS

514-0621 COVER GP-ACCESS
S/N LC51-UP
AN ATTACHMENT

i06931159 SEBP6481

For full view, you need register

Parts for your C4.4 GENERATOR SET:

Pos.	Part No	Qty	Parts name
1.	514-0622	[1]	PLATE
2.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
3.	8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
	M		METRIC PART

#SEBP64810011

304-5574: COVER GP-VALVE MECHANISM

COVER GP-VALVE MECHANISM

304-5574 COVER GP-VALVE MECHANISM
S/N E3N1-UP

i02877779 SEBP6481

3045574 COVER GP-VALVE MECHANISM Parts scheme

For full view, you need register

Parts for your C4.4 GENERATOR SET:

Pos.	Part No	Qty	Parts name
1.	301-8253	[1]	COVER GP-VALVE MECHANISM
1A.	298-4546	[1]	GASKET-VALVE COVER
1B.	136-3608	[1]	CAP AS (ENGINE OIL FILLER)
	124-0506	[1]	SEAL
	298-4548	[1]	SEPARATOR-OIL
2.	277-5031	[7]	BOLT-SPECIAL
3.	298-4550	[4]	BOLT-SPECIAL
4.	298-4551	[1]	BASE GP-VALVE COVER & INJ HARN
4A.	298-4552	[1]	GASKET
4B.	285-1973	[2]	HARNESS AS-ENGINE (FUEL INJECTION)
			(EACH INCLUDES)
	316-9351	[1]	MOUNTING-CABLE TIE
	113-4630	[1]	RECEPTACLE AS-CONNECTOR (4-PIN)
	9X-3401	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[4]	PIN-CONNECTOR (14-GA TO 16-GA)
4C.	277-5064	[2]	SEAL-O-RING
4D.	277-5065	[2]	CLIP
5.	517-8243	[4]	SLEEVE-INJECTOR
6.	198-9169	[1]	HOSE
7.	162-1565	[1]	SPRING (CRANKCASE BREATHER HOSE)
8.	032-9020	[1]	CLIP
9.	7C-1281	[1]	BRACKET
10.	217-9039	[1]	STRAP-CABLE

#SEBP64810012

359-0716: CRANKSHAFT GP

CRANKSHAFT GP

359-0716 CRANKSHAFT GP
S/N E3N1-UP
W/O SPLINE
PART OF 381-2246, 381-2316 CRANKSHAFT GP
Type 1

i03943752 SEBP6481

For full view, you need register

Parts for your C4.4 GENERATOR SET:

Pos.	Part No	Qty	Parts name
1.	032-9090	[2]	WASHER-THRUST (STANDARD-UPPER)
	067-6873 AB		WASHER-THRUST (0.18-MM OS)
2.	032-9091	[2]	WASHER-THRUST (STANDARD-LOWER)
	067-6874 AB		WASHER-THRUST (0.18-MM OS)
3.	353-7423	[1]	KIT-BEARING (MAIN)
	353-7424 AB		KIT-BEARING (0.25-MM US)
	353-7425 AB		KIT-BEARING (0.50-MM US)
	353-7426 AB		KIT-BEARING (0.75-MM US)
4.	360-3986	[1]	KIT-BEARING (CONNECTING ROD)(STANDARD)
	468-7762 AB		KIT-BEARING (0.254-MM US)
	468-7769 AB		KIT-BEARING (0.508-MM US)
	468-7770 AB		KIT-BEARING (0.762-MM US)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED

#SEBP64810013

359-0716: CRANKSHAFT GP

CRANKSHAFT GP

359-0716 CRANKSHAFT GP
S/N E3N1-UP
W/O SPLINE
PART OF 381-2246, 381-2316 CRANKSHAFT GP
Type 2

i07153408 SEBP6481

For full view, you need register

Parts for your C4.4 GENERATOR SET:

Pos.	Part No	Qty	Parts name
1.		[2]	PLATE-THRUST (STANDARD)(UPPER)
	067-6873 AB		WASHER-THRUST (0.18-MM OS)
2.		[2]	PLATE-THRUST (STANDARD)(LOWER)
	067-6874 AB		WASHER-THRUST (0.18-MM OS)
3.	518-5437 C	[1]	KIT-BEARING (STANDARD)
	518-5440 ABC		KIT-BEARING (0.254-MM US)
	518-5441 ABC		KIT-BEARING (0.508-MM US)
	518-5885 ABC		KIT-BEARING (0.762-MM US)
4.	360-3986	[1]	KIT-BEARING (CONNECTING ROD)
	468-7762 AB		KIT-BEARING (0.254-MM US)
	468-7769 AB		KIT-BEARING (0.508-MM US)
	468-7770 AB		KIT-BEARING (0.762-MM US)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE

#SEBP64810014

381-2246: CRANKSHAFT GP

CRANKSHAFT GP

381-2246 CRANKSHAFT GP
S/N E3N1-UP
Type 1

i05159050 SEBP6481

For full view, you need register

Parts for your C4.4 GENERATOR SET:

Pos.	Part No	Qty	Parts name
1.	359-0716 Y	[1]	CRANKSHAFT GP
2.	276-7394 M	[3]	SCREW (M6X1XX12-MM)
3.	341-4028	[1]	RING-TIMING (CRANKSHAFT)
4.	339-8780	[1]	DOWEL
5.	216-8314	[1]	GEAR-CRANKSHAFT (34-TEETH)
6.	067-6135	[1]	KEY-WOODRUFF

	067-6873 F	[2]	WASHER-THRUST (0.18-MM OS)
	067-6874 F	[2]	WASHER-THRUST (0.18-MM OS)

			AVAILABLE REPAIR KIT(S):
	353-7424	[1]	KIT-BEARING (0.25-MM US)
			(INCLUDES BEARINGS)
	353-7425	[1]	KIT-BEARING (0.50-MM US)
			(INCLUDES BEARINGS)
	353-7426	[1]	KIT-BEARING (0.75-MM US)
			(INCLUDES BEARINGS)
	F		NOT SHOWN
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP64810015

381-2246: CRANKSHAFT GP

CRANKSHAFT GP

381-2246 CRANKSHAFT GP
S/N E3N1-UP
Type 2

i07229638 SEBP6481

For full view, you need register

Parts for your C4.4 GENERATOR SET:

Pos.	Part No	Qty	Parts name
1.	359-0716 Y	[1]	CRANKSHAFT GP
2.	276-7394 M	[3]	SCREW (M6X1XX12-MM)
3.	341-4028	[1]	RING-TIMING (CRANKSHAFT)
4.	339-8780	[1]	DOWEL
5.	216-8314	[1]	GEAR-CRANKSHAFT (34-TEETH)
6.	067-6135	[1]	KEY-WOODRUFF

	067-6873 F	[2]	WASHER-THRUST (0.18-MM OS)
	067-6874 F	[2]	WASHER-THRUST (0.18-MM OS)

			AVAILABLE REPAIR KIT(S):
	518-5440 C	[1]	KIT-BEARING (0.254-MM US)(0.254-MM US)
			(INCLUDES BEARINGS)
	518-5441 C	[1]	KIT-BEARING (0.508-MM US)(0.508-MM US)
			(INCLUDES BEARINGS)
	518-5885 C	[1]	KIT-BEARING (0.762-MM US)(0.762-MM US)
			(INCLUDES BEARINGS)
	C		CHANGE FROM PREVIOUS TYPE
	F		NOT SHOWN
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP64810016

381-2246: CRANKSHAFT GP

CRANKSHAFT GP

381-2246 CRANKSHAFT GP
S/N E3N1-UP
Type 3

i07386257 SEBP6481

For full view, you need register

Parts for your C4.4 GENERATOR SET:

Pos.	Part No	Qty	Parts name
1.	359-0716 Y	[1]	CRANKSHAFT GP
2.	276-7394 M	[3]	SCREW (M6X1XX12-MM)
3.	341-4028	[1]	RING-TIMING (CRANKSHAFT)
4.	339-8780	[1]	DOWEL
5.	216-8314	[1]	GEAR-CRANKSHAFT (34-TEETH)
6.	067-6135	[1]	KEY-WOODRUFF
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP64810017

381-2316: CRANKSHAFT GP

CRANKSHAFT GP

381-2316 CRANKSHAFT GP
S/N E3N1-UP
Type 1

i05163597 SEBP6481

For full view, you need register

Parts for your C4.4 GENERATOR SET:

Pos.	Part No	Qty	Parts name
1.	359-0716 Y	[1]	CRANKSHAFT GP
2.	276-7394 M	[3]	SCREW (M6X1XX12-MM)
3.	341-4028	[1]	RING-TIMING (CRANK SHAFT)
4.	339-8780	[1]	DOWEL
5.	216-8314	[1]	GEAR-CRANKSHAFT (34-TEETH)
6.	067-6135	[1]	KEY-WOODRUFF
7.	067-6873	[2]	WASHER-THRUST (0.18-MM OS)
8.	067-6874	[2]	WASHER-THRUST (0.18-MM OS)

			AVAILABLE REPAIR KIT(S):
	353-7424	[1]	KIT-BEARING (0.25-MM US)
			(INCLUDES BEARINGS)
	353-7425	[1]	KIT-BEARING
			(INCLUDES BEARINGS)
	353-7426	[1]	KIT-BEARING
			(INCLUDES BEARINGS)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP64810018

381-2316: CRANKSHAFT GP

CRANKSHAFT GP

381-2316 CRANKSHAFT GP
S/N E3N1-UP
Type 2

i07229592 SEBP6481

For full view, you need register

Parts for your C4.4 GENERATOR SET:

Pos.	Part No	Qty	Parts name
1.	359-0716 Y	[1]	CRANKSHAFT GP
2.	276-7394 M	[3]	SCREW (M6X1XX12-MM)
3.	341-4028	[1]	RING-TIMING (CRANK SHAFT)
4.	339-8780	[1]	DOWEL
5.	216-8314	[1]	GEAR-CRANKSHAFT (34-TEETH)
6.	067-6135	[1]	KEY-WOODRUFF
7.	067-6873	[2]	WASHER-THRUST (0.18-MM OS)
8.	067-6874	[2]	WASHER-THRUST (0.18-MM OS)

			AVAILABLE REPAIR KIT(S):
	518-5440 C	[1]	KIT-BEARING (0.254-MM US)(0.254-MM US)
			(INCLUDES BEARINGS)
	518-5441 C	[1]	KIT-BEARING (0.508-MM US)(0.508-MM US)
			(INCLUDES BEARINGS)
	518-5885 C	[1]	KIT-BEARING (0.762-MM US)(0.762-MM US)
			(INCLUDES BEARINGS)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP64810019

381-2316: CRANKSHAFT GP

CRANKSHAFT GP

381-2316 CRANKSHAFT GP
S/N E3N1-UP
Type 3

i07386253 SEBP6481

For full view, you need register

Parts for your C4.4 GENERATOR SET:

Pos.	Part No	Qty	Parts name
1.	359-0716 Y	[1]	CRANKSHAFT GP
2.	276-7394 M	[3]	SCREW (M6X1XX12-MM)
3.	341-4028	[1]	RING-TIMING (CRANK SHAFT)
4.	339-8780	[1]	DOWEL
5.	216-8314	[1]	GEAR-CRANKSHAFT (34-TEETH)
6.	067-6135	[1]	KEY-WOODRUFF
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION