2W-0176 MOUNTING GP-ALTERNATOR S/N 6NC1-UP; R6J1-UP; 08Z1-UP WITHOUT ADJUSTING ROD FOR USE WITH CUSTOMER SUPPLIED ALTERNATOR 235B

Pos.	Part No	Qty	Parts name
1.	0T-0055 C	[1]	BOLT (3/8-16X4.25-IN)
2.	9S-8752 C	[3]	NUT-FULL (3/8-16-THD)
3.	1W-4972 C	[1]	BRACKET
4.	5M-2894 C	[4]	WASHER-HARD (10.2X18.5X2.5-MM THK)
5.	8S-9191 C	[2]	BOLT (3/8-16X4-IN)
6.	0T-0065 B	[1]	BOLT (3/8-16X3.5-IN)
7.	8S-9191 B	[1]	BOLT (3/8-16X4-IN)
8.	9S-8752 B	[1]	NUT-FULL (3/8-16-THD)
9.	5M-2894 B	[1]	WASHER-HARD (10.2X18.5X2.5-MM THK)
10.	0S-1619	[1]	BOLT (3/8-16X3-IN)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE

#SEBP64870031

1W-5998: PAN GP-OIL

PAN GP-OIL

1W-5998 PAN GP-OIL -ENGINE
S/N 6NC1-UP; R6J1-UP; 08Z1-UP

i00352662 SEBP6487

For full view, you need register

Parts for your 235B EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	169-4200	[1]	GASKET
2.	2P-1738	[1]	PLATE AS-OIL PAN
	1S-5304	[1]	LUG
3.	8N-6849	[1]	ADAPTER-PLUG
4.	126-1683	[1]	PLUG-DRAIN (ENGINE OIL PAN)
5.	3B-1915	[2]	BOLT (3/8-16X1.375-IN)
6.	8N-6854	[1]	GASKET
7.	1W-5984	[1]	PAN-OIL
8.	169-4199	[1]	GASKET-OIL PAN

#SEBP64870032

168-4530: PISTON & ROD GP

PISTON & ROD GP

168-4530 PISTON & ROD GP
S/N 6NC1-UP; R6J1-UP; 08Z1-UP
16:1 RATIO

i01095967 SEBP6487

For full view, you need register

Parts for your 235B EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	168-4531	[1]	BODY AS-PISTON
2.	2W-1707	[1]	RING-PISTON (TOP)
3.	2W-1708	[1]	RING-PISTON (INTERMEDIATE)
4.	6I-0497	[1]	RING-PISTON (OIL)
5.	1S-9543	[2]	RETAINER-PIN
6.	524-7986	[1]	PIN-PISTON
7.	8N-1721	[1]	ROD AS-CONNECTING
	1P-9956	[2]	BOLT-CONNECTING ROD
	5S-6348	[2]	NUT (1/2-20-THD)
	8N-1849	[1]	BEARING-CONNECTING ROD
8.	328-5572	[1]	BEARING-CONNECTING ROD (STANDARD)
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP64870033

109-5176: PULLEY GP-CRANKSHAFT

PULLEY GP-CRANKSHAFT

109-5176 PULLEY GP-CRANKSHAFT
S/N 6NC1-UP; R6J1-UP; 08Z1-UP

i00490921 SEBP6487

1095176 PULLEY GP-CRANKSHAFT Parts scheme

For full view, you need register

Parts for your 235B EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	109-4848	[1]	PULLEY-CRANKSHAFT
2.	5S-9948	[1]	WASHER (3-GROOVE)
3.	7B-5163	[1]	BOLT (3/4-16X4.75-IN)

#SEBP64870034

2P-6226: SEAL GP-CRANKSHAFT

SEAL GP-CRANKSHAFT

2P-6226 SEAL GP-CRANKSHAFT
S/N 6NC1-UP; R6J1-UP; 08Z1-UP
FOR USE WITH WET FLYWHEEL HOUSINGS

i00145070 SEBP6487

For full view, you need register

Parts for your 235B EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
1.	7C-4297	[1]	SEAL GP-CRANKSHAFT
2.	362-8853	[1]	SEAL GP-CRANKSHAFT (CLOCKWISE ROTATION)

#SEBP64870035

8N-4422: SUPPORT GP-ENGINE

SUPPORT GP-ENGINE

8N-4422 SUPPORT GP-ENGINE
S/N 6NC1-UP; R6J1-UP; 08Z1-UP

i00430933 SEBP6487

For full view, you need register

Parts for your 235B EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	131-7736	[1]	SUPPORT AS-ENGINE
2.	7B-3235	[6]	BOLT (1/2-13X1.375-IN)
3.	5P-8245	[6]	WASHER-HARD (13.5X25.5X3-MM THK)

#SEBP64870036

8N-0107: TRUNNION GP-ENGINE

TRUNNION GP-ENGINE

8N-0107 TRUNNION GP-ENGINE
S/N 6NC1-UP; R6J1-UP; 08Z1-UP

i00157293 SEBP6487

For full view, you need register

Parts for your 235B EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8N-0105	[1]	TRUNNION AS
	2P-1487	[1]	RING
2.	0L-1329 C	[6]	BOLT (1/2-13X3-IN)
3.	2P-1692	[1]	SEAL-O-RING
	C		CHANGE FROM PREVIOUS TYPE

#SEBP64870037

7C-7013: VALVE MECHANISM GP

VALVE MECHANISM GP

7C-7013 VALVE MECHANISM GP
S/N 6NC1-UP; R6J1-UP; 08Z1-UP
ADDITIONAL CYLINDER HEAD FASTENER BOLTS AND WASHERS CAN BE FOUND IN 7N-9536.
PART OF 7N-8026 VALVE MECHANISM GP

i00122276 SEBP6487

For full view, you need register

Parts for your 235B EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7C-7012	[1]	SHAFT AS
	3K-8460	[1]	PLUG (1/2-20-THD)
	5M-4606	[1]	DOWEL
	7C-7011	[1]	BRACKET-SHAFT
	8N-3251	[1]	SHAFT-ROCKER ARM
	6V-3508	[2]	PLUG-CUP
2.	5S-5879	[4]	BRACKET-SHAFT
3.	4B-4910	[5]	SPRING
5.	8N-3327	[6]	ROCKER ARM GP (INLET)
6.	8S-1499	[1]	BRACKET AS
	1L-5072	[1]	DOWEL
7.	8N-3325	[6]	ROCKER ARM GP (EXHAUST)
8.	9M-9886	[13]	WASHER (31.75X19.05X0.08-MM THK)
9.	7N-0550	[2]	WASHER-SPRING
10.	9H-1113	[2]	RING-RETAINING
11.	8M-4448	[1]	SEAL-O-RING
12.	1B-7709	[1]	BOLT (5/8-11X8-IN)
13.	2S-0736	[1]	WASHER-HARD (17X27X3.5-MM THK)
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP64870038

7N-8026: VALVE MECHANISM GP

VALVE MECHANISM GP

7N-8026 VALVE MECHANISM GP
S/N 6NC1-UP; R6J1-UP; 08Z1-UP

i00122392 SEBP6487

For full view, you need register

Parts for your 235B EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7C-7013 CY	[1]	VALVE MECHANISM GP
2.	7S-3161	[12]	LIFTER-VALVE
3.	5S-5918	[12]	PUSHROD-VALVE
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#SEBP64870039

8N-4457: BASE GP-OIL FILTER

BASE GP-OIL FILTER

8N-4457 BASE GP-OIL FILTER
S/N 6NC1-UP; R6J1-UP; 08Z1-UP
PART OF 100-3025 COOLER GP-FLTR BASE & ENG OIL

i00122469 SEBP6487

For full view, you need register

Parts for your 235B EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9Y-7149 C	[1]	BASE AS-OIL FILTER
	3B-0645	[3]	PLUG-CUP
2.	8T-6762	[1]	PLUG-PIPE (1/2-14-THD)
3.	2P-2537	[1]	STUD-HOLLOW
4.	1P-1367	[2]	PLUNGER (RELIEF VALVE)
5.	0S-1618 C	[1]	BOLT (5/16-18X1-IN)
6.	9M-1974	[3]	WASHER-HARD (8.8X16X2-MM THK)
7.	9Y-6859 C	[1]	COVER
8.	1B-2790 C	[2]	BOLT (5/16-18X1.375-IN)
9.	8M-3182	[2]	SPRING
10.	0S-1618 B	[1]	BOLT (5/16-18X1-IN)
11.	8C-3445 C	[1]	CAP-DUST (ENGINE OIL SAMPLING VALVE)
12.	9Y-6860 C	[1]	GASKET
13.	9M-1974 B	[1]	WASHER-HARD (8.8X16X2-MM THK)
14.	3J-7354 C	[1]	SEAL-O-RING
15.	8C-3446 C	[1]	VALVE-SAMPLING (ENGINE OIL)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE