BASIC ENGINE
PAN GP-OILHOUSING GP-FLYWHEEL
VALVE MECHANISM GP
CRANKSHAFT GP
CYLINDER BLOCK GP
BASIC ENGINE
PAN GP-OIL
#SEBP64920030
361-3202: COVER GP-OIL PAN
361-3202 COVER GP-OIL PAN
PROVIDE A COVER GROUP FOR THE LEFT HAND PORT ON THE C27 TIER 4 NARROW WELL SERVICE OIL PAN
FOR USE WITH @@@@@ 9Y-8809@@@@@
AN ATTACHMENT
PROVIDE A COVER GROUP FOR THE LEFT HAND PORT ON THE C27 TIER 4 NARROW WELL SERVICE OIL PAN
FOR USE WITH @@@@@ 9Y-8809@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your C27 INDUSTRIAL ENGINE:
CATERPILLAR SIS#SEBP64920031
9Y-9827: COVER GP-OIL PAN
For full view, you need register
Parts for your C27 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 239-5572 | [2] | SEAL-INTEGRAL (PAN) | |
| 2. | 4N-0794 | [2] | COVER | |
| 3. | 0S-1588 | [5] | BOLT (3/8-16X1.25-IN) | |
| 4. | 5M-2894 | [5] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 5. | 9S-4185 | [1] | PLUG (3/4-16-THD) | |
| 6. | 8L-2786 | [1] | SEAL-O-RING | |
| 7. | 061-9458 | [1] | SEAL-O-RING | |
| 8. | 9X-6451 | [1] | PLUG-DRAIN (MAGNETIC)(ENGINE OIL PAN) | |
| 9. | 4P-0519 | [1] | ADAPTER AS-DRAIN | |
| 109-5840 | [1] | ADAPTER-PLUG | ||
| 109-5839 | [1] | PLUG-DRAIN (ENGINE OIL PAN) | ||
| 10. | 379-5053 | [1] | SEAL-O-RING | |
| 11. | 0S-1587 | [2] | BOLT (1/2-13X1.75-IN) | |
| 12. | 3B-0551 | [1] | PLUG-PIPE | |
| 13. | 4N-9968 | [1] | PLUG | |
| 14. | 109-0072 | [1] | SEAL-O-RING |
#SEBP64920032
9Y-9828: COVER GP-OIL PAN
For full view, you need register
Parts for your C27 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4P-0519 | [1] | ADAPTER AS-DRAIN | |
| 109-5839 | [1] | PLUG-DRAIN (ENGINE OIL PAN) | ||
| 109-5840 | [1] | ADAPTER-PLUG (PAN) | ||
| 2. | 239-5572 | [2] | SEAL-INTEGRAL | |
| 3. | 4N-0794 | [2] | COVER | |
| 4. | 0S-1588 | [6] | BOLT (3/8-16X1.25-IN) | |
| 5. | 5M-2894 | [6] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 6. | 4N-9968 | [2] | PLUG | |
| 7. | 109-0072 | [2] | SEAL-O-RING | |
| 8. | 379-5053 | [1] | SEAL-O-RING | |
| 9. | 9S-4185 | [1] | PLUG (3/4-16-THD) | |
| 10. | 8L-2786 | [1] | SEAL-O-RING | |
| 11. | 0S-1587 | [2] | BOLT (1/2-13X1.75-IN) | |
| 12. | 3B-0551 | [2] | PLUG-PIPE |
#SEBP64920033
270-8580: COVER GP-REAR HOUSING
270-8580 COVER GP-REAR HOUSING -ENGINE
FOR USE WITH SAE NO.0 AND SAE NO.1
CANNOT BE USED WITH HEAVY DUTY FLYWHEEL HOUSING
AN ATTACHMENT
FOR USE WITH SAE NO.0 AND SAE NO.1
CANNOT BE USED WITH HEAVY DUTY FLYWHEEL HOUSING
AN ATTACHMENT
For full view, you need register
Parts for your C27 INDUSTRIAL ENGINE:
CATERPILLAR SIS#SEBP64920034
270-8664: COVER GP-REAR HOUSING
270-8664 COVER GP-REAR HOUSING -ENGINE
FOR USE WITH SAE NO.0 AND SAE NO.1
CANNOT BE USED WITH HEAVY DUTY FLYWHEEL HOUSING
AN ATTACHMENT
FOR USE WITH SAE NO.0 AND SAE NO.1
CANNOT BE USED WITH HEAVY DUTY FLYWHEEL HOUSING
AN ATTACHMENT
For full view, you need register
Parts for your C27 INDUSTRIAL ENGINE:
CATERPILLAR SIS#SEBP64920035
348-5782: COVER GP-VALVE MECHANISM
For full view, you need register
Parts for your C27 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2N-8109 C | [1] | CLAMP | |
| 2. | 4W-3027 C | [2] | BREATHER AS (CRANKCASE) | |
| 3. | 4W-3034 C | [2] | CLAMP-HOSE | |
| 4. | 345-2010 | [4] | COVER | |
| 5. | 126-0559 C | [6] | BOLT (5/16-18X1.25-IN) | |
| 6. | 212-7728 | [36] | ISOLATOR AS | |
| 7. | 224-7506 | [6] | SEAL-VALVE COVER | |
| 8. | 224-9907 | [6] | STUD (5/16-18-THD) | |
| 9. | 345-2009 | [2] | COVER | |
| 10. | 345-2011 C | [2] | ELBOW | |
| 11. | 345-2012 C | [1] | ELBOW | |
| 12. | 392-4455 C | [1] | FILLER GP-ENGINE OIL | |
| 13. | 393-5775 C | [1] | COVER | |
| 14. | 033-6031 C | [2] | SEAL-O-RING | |
| 15. | 0S-1618 C | [2] | BOLT (5/16-18X1-IN) | |
| 16. | 5P-8211 | [4] | SEAL-O-RING | |
| 17. | 6V-3831 C | [1] | SEAL-O-RING | |
| 18. | 7X-0440 | [30] | BOLT (5/16-18X1.75-IN) | |
| 19. | 8T-4224 | [36] | WASHER-HARD (8.8X16X2-MM THK) | |
| 20. | 9M-1974 C | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP64920036
348-5782: COVER GP-VALVE MECHANISM
For full view, you need register
Parts for your C27 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2N-8109 | [1] | CLAMP | |
| 2. | 4W-3027 | [2] | BREATHER AS (CRANKCASE) | |
| 3. | 4W-3034 | [2] | CLAMP-HOSE | |
| 4. | 345-2010 | [4] | COVER | |
| 5. | 126-0559 | [6] | BOLT (5/16-18X1.25-IN) | |
| 6. | 212-7728 | [36] | ISOLATOR AS | |
| 7. | 224-7506 | [6] | SEAL-VALVE COVER | |
| 8. | 224-9907 | [6] | STUD (5/16-18-THD) | |
| 9. | 345-2009 | [2] | COVER | |
| 10. | 345-2011 | [2] | ELBOW | |
| 11. | 345-2012 | [1] | ELBOW | |
| 12. | 469-8425 CY | [1] | FILLER GP-ENGINE OIL | |
| 13. | 393-5775 | [1] | COVER | |
| 14. | 033-6031 | [2] | SEAL-O-RING | |
| 15. | 0S-1618 | [2] | BOLT (5/16-18X1-IN) | |
| 16. | 5P-8211 | [4] | SEAL-O-RING | |
| 17. | 6V-3831 | [1] | SEAL-O-RING | |
| 18. | 7X-0440 | [30] | BOLT (5/16-18X1.75-IN) | |
| 19. | 8T-4224 | [36] | WASHER-HARD (8.8X16X2-MM THK) | |
| 20. | 9M-1974 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP64920037
225-6052: CRANKSHAFT GP
225-6052 CRANKSHAFT GP
For full view, you need register
Parts for your C27 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 253-1752 J | [2] | PLATE-THRUST | |
| 2. | 319-7401 Y | [1] | SEAL GP-CRANKSHAFT (FRONT) | |
| 3. | 317-8766 J | [7] | BEARING-MAIN (STANDARD) | |
| 4W-5698 AB | BEARING-MAIN (0.63-MM US) | |||
| 4W-5699 AB | BEARING-MAIN (1.27-MM US) | |||
| 4W-5700 AB | BEARING-MAIN (0.63-MM OS) | |||
| 4W-5701 AB | BEARING-MAIN (0.63-MM OS, 0.63-MM US) | |||
| 4. | 384-9907 | [1] | CRANKSHAFT AS | |
| 4A. | 4N-0684 | [1] | DOWEL | |
| 4B. | 7S-5005 | [1] | DOWEL | |
| 4C. | 223-9135 | [1] | GEAR-CRANKSHAFT (99-TEETH) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 243-6718 AJ | KIT-CRANKSHAFT BEARING (STANDARD) | |||
| (KIT INCLUDES A COMPLETE SET OF MAIN BEARINGS & THRUST PLATES) | ||||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| J | KIT MARKED J INCLUDES PART(S) MARKED J | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP64920038
348-9904: CYLINDER BLOCK AS
348-9904 CYLINDER BLOCK AS
PART OF 348-9905 CYLINDER BLOCK AS
PART OF 348-9905 CYLINDER BLOCK AS
For full view, you need register
Parts for your C27 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3P-1323 | [14] | BOLT-BEARING CAP (7/8-14X7.75-IN) | |
| 2. | 225-5966 | [1] | SLEEVE | |
| 3. | 232-7607 | [7] | CAP-CRANKSHAFT | |
| 4. | 365-4307 | [14] | BOLT-12 POINT HEAD (M11X1.25X50-MM) | |
| 5. | 341-0087 | [2] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 6V-6609 | [1] | SEAL-O-RING | ||
| 9S-4185 | [1] | PLUG (3/4-16-THD) | ||
| 6. | 4N-0685 | [1] | BUSHING (1-IN WIDE) | |
| 7. | 4N-6658 | [1] | BUSHING (1.3-IN WIDE) | |
| 9. | 9H-1031 | [14] | WASHER-HARD (24X41.5X6-MM THK) | |
#SEBP64920039
348-9905: CYLINDER BLOCK AS
348-9905 CYLINDER BLOCK AS
PART OF 349-2528 CYLINDER BLOCK GP
PART OF 349-2528 CYLINDER BLOCK GP
For full view, you need register
Parts for your C27 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9L-5854 | [12] | BAND-FILLER (130.2-MM ID) | |
| 2. | 110-2220 | [12] | SEAL-LINER | |
| 3. | 142-6217 | [12] | SEAL-O-RING | |
| 4. | 142-7072 | [12] | SEAL-LINER | |
| 5. | 197-9322 | [12] | LINER-CYLINDER BLOCK | |
| 6. | 348-9904 Y | [1] | CYLINDER BLOCK AS | |
| 6I-4361 ABFN | INSERT-LINER SEAT (0.772-MM THK) | |||
| 9Y-3368 ABFN | INSERT-LINER SEAT (0.822-MM THK) | |||
| 6I-4362 ABFN | INSERT-LINER SEAT (0.872-MM THK) | |||
| 6I-4364 ABFN | INSERT-LINER SEAT (1.655-MM THK) | |||
| 6I-4363 ABFN | INSERT-LINER SEAT (1.555-MM THK) | |||
| 2W-3815 ABFN | INSERT-LINER SEAT (1.605-MM THK) | |||
| 101-0523 ABFN | INSERT-LINER SEAT (5.21-MM THK) | |||
| 6I-4365 ABFN | INSERT-LINER SEAT (2.66-MM THK) | |||
| 5N-0093 ABFN | INSERT-LINER SEAT (2.71-MM THK) | |||
| 6I-4366 ABFN | INSERT-LINER SEAT (2.76-MM THK) | |||
| 101-0524 ABFN | INSERT-LINER SEAT (5.16-MM THK) | |||
| 101-0525 ABFN | INSERT-LINER SEAT (5.26-MM THK) | |||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| F | NOT SHOWN | |||
| N | FOR SALVAGE OF DAMAGED LIFTER BORES IN CYLINDER BLOCK REFER TO SEBF8076 IN SISWEB | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
BASIC ENGINE
PAN GP-OIL
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE OIL PUMP ON CERTAIN C27, AND C32 INDUSTRIAL ENGINES, PETROLEUM ENGINES, AND GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE OIL PUMP ON CERTAIN C27, AND C32 INDUSTRIAL ENGINES, PETROLEUM ENGINES, AND GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE OIL PUMP ON CERTAIN C27, AND C32 INDUSTRIAL ENGINES, PETROLEUM ENGINES, AND GENERATOR SETS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE OIL PUMP ON CERTAIN C27, AND C32 INDUSTRIAL ENGINES, PETROLEUM ENGINES, AND GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE OIL PUMP ON CERTAIN C27, AND C32 INDUSTRIAL ENGINES, PETROLEUM ENGINES, AND GENERATOR SETS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE OIL PUMP ON CERTAIN C27, AND C32 INDUSTRIAL ENGINES, PETROLEUM ENGINES, AND GENERATOR SETS
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
