AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8N-2669 TURBOCHARGER GP S/N 6NC1-UP; 08Z1-UP; 10Z1-UP 140G MOTOR GRADER


AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
FUEL SYSTEM
CONTROL GP-FUEL RATIO
DRIVE GP-TACHOMETER
PUMP GP-FUEL INJECTION
FILTER GP-FUEL
GOVERNOR GP
PUMP GP-FUEL INJECTION

MOTOR GRADER 140G MOTOR GRADER 13W
 3306 Engine Rebuild Kit & Related Parts for 12G, 12H, 140G, 140H Motorgrader 13W00001-UP (MACHINE) SEBP6498 140G 13W   (1975)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP
TURBOCHARGER GP
7C-8657 TURBOCHARGER GP
TURBOCHARGER GP
7N-7748 TURBOCHARGER GP
TURBOCHARGER GP
8N-2669 TURBOCHARGER GP
TURBOCHARGER GP
8N-9247 TURBOCHARGER GP
 

#SEBP64980110
 

8N-2669: TURBOCHARGER GP

8N-2669 TURBOCHARGER GP
S/N 6NC1-UP; 08Z1-UP; 10Z1-UP
i00143618 SEBP6498
8N2669 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-7748 Y [1] TURBOCHARGER GP  
2. 7L-3195 C [4] BOLT-HIGH TEMPERATURE (3/8-16X1.75-IN)  
3. 2N-2766 C [4] LOCKNUT (3/8-16-THD)  
4. 1P-0451 [1] GASKET  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP64980111
 

8N-9247: TURBOCHARGER GP

8N-9247 TURBOCHARGER GP
S/N 6NC1-UP; 08Z1-UP; 10Z1-UP
PART OF 1N-3079 TURBOCHARGER GP
i00143634 SEBP6498
8N9247 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-7746 [1] HOUSING-COMPRESSOR  
2. 1P-0715 [4] PLATE-CLAMP  
3. 0S-1614 [8] BOLT (1/4-20X0.5-IN)  
  3B-4504 [8] LOCKWASHER  
4. 7N-7750 Y [1] CARTRIDGE GP-TURBOCHARGER  
5. 6N-1521 [1] HOUSING  
6. 6N-1523 [2] LOCK  
  6N-1522 [2] PLATE-CLAMP  
7. 6N-2145 [4] BOLT  
  4N-8155 FJ [1] PLATE-TURBOCHARGER INFORMATION  
  8H-3710 FJ [1] SCREW-TAPPING (6-32X0.375-IN)  
  F   NOT SHOWN
  J   MOUNTED ON CARTRIDGE HOUSING
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP64980112
 

111-5162: CONTROL GP-FUEL RATIO

111-5162 CONTROL GP-FUEL RATIO
S/N 6NC1-UP; R6J1-UP; 08Z1-UP; 10Z1-UP
PART OF 113-5342 PUMP GP-GOV & FUEL INJ
i00125002 SEBP6498
1115162 CONTROL GP-FUEL RATIO Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-9315 [2] WASHER-SPRING  
2. 5P-0537 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
3. 2A-5546 [2] BOLT (1/4-20X1.375-IN)  
4. 5P-6945 [2] BOLT (1/4-20X1.125-IN)  
5. 3E-6760 [1] SEAL-O-RING  
6. 4P-7274 [1] COVER  
7. 9S-8748 [1] NUT-FULL (1/4-28-THD)  
8. 4W-0924 [1] RETAINER  
9. 5P-8210 [1] SEAL-O-RING  
10. 7W-2826 [1] SPRING  
11. 4P-7275 [1] COVER  
12. 106-6493 [1] WASHER  
13. 6I-1564 [1] DIAPHRAGM  
14. 9N-1754 [1] SPRING  
15. 7W-2828 [1] SPRING  
16. 7W-2015 [1] EXTENSION-VALVE  
17. 7N-9035 [1] RETAINER  
18. 7N-9062 [1] HOUSING  
19. 8N-5763 [1] SEAL  
20. 8N-5764 [1] PISTON  
21. 8F-4610 [1] RING-RETAINING  
22. 2W-9316 [1] VALVE AS (FUEL CONTROL)  
23. 9Y-8088 [1] VALVE  
24. 8N-5765 [1] SPRING  
25. 115-3358 [1] WASHER (12.7X6.65X0.79-MM THK)  
 

#SEBP64980113
 

1W-2481: COVER GP-TACHOMETER DRIVE

1W-2481 COVER GP-TACHOMETER DRIVE
S/N 6NC1-UP; R6J1-UP; 08Z1-UP; 10Z1-UP
i00124562 SEBP6498
1W2481 COVER GP-TACHOMETER DRIVE Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-7629 [1] COVER  
2. 4M-8303 [1] SEAL-O-RING  
3. 0S-1615 [2] BOLT (1/4-20X0.75-IN)  
4. 5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
 

#SEBP64980114
 

7C-8993: FASTENER GP-FUEL INJ PUMP

7C-8993 FASTENER GP-FUEL INJ PUMP
S/N 6NC1-UP; R6J1-UP; 08Z1-UP; 10Z1-UP
PART OF 113-5342, 113-5359, 117-4945, 133-8923, 2W-0258, 2W-6229 PUMP GP-GOV & FUEL INJ
i00124736 SEBP6498
7C8993 FASTENER GP-FUEL INJ PUMP Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8B-2377 [4] BOLT (1/4-20X2-IN)  
2. 4N-1761 [4] BOLT (1/4-20X6.5-IN)  
3. 9S-4191 [1] PLUG (9/16-18-THD)  
4. 0S-1614 [3] BOLT (1/4-20X0.5-IN)  
5. 4F-7957 C [8] BOLT (1/4-20X0.875-IN)  
6. 2S-7383 [1] BOLT (1/4-20X3.25-IN)  
7. 8F-8178 [2] BOLT (1/4-20X3.25-IN)  
8. 6B-4198 [2] BOLT (1/4-20X4.19-IN)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP64980115
 

2W-3282: FILTER GP-SECONDARY FUEL

2W-3282 FILTER GP-SECONDARY FUEL
S/N 6NC1-UP; R6J1-UP; 08Z1-UP; 10Z1-UP
i00124607 SEBP6498
2W3282 FILTER GP-SECONDARY FUEL Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-9519 [1] BASE AS-FUEL FILTER  
2. 5M-6214 [1] PLUG (1/8-27 PTF)  
3. 9S-4167 [1] STUD-HOLLOW (1-14X1.47-IN)  
4. 9S-4191 [1] PLUG (9/16-18-THD)  
  3J-1907 [1] SEAL-O-RING  
5. 4W-9057 C [1] TUBE AS  
6. 030-7947 [1] ADAPTER-ELBOW  
7. 6B-4198 [2] BOLT (1/4-20X4.19-IN)  
  5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
8. 7N-9520 [1] GASKET  
9. 1R-0750 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
10. 5P-4289 [1] ELBOW  
11. 3J-1907 [2] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP64980116
 

2W-2410: GOVERNOR GP

2W-2410 GOVERNOR GP
S/N 6NC1-UP; R6J1-UP; 08Z1-UP
PART OF 113-5359, 117-4945 PUMP GP-GOV & FUEL INJ
i00124606 SEBP6498
2W2410 GOVERNOR GP Parts scheme 2W2410 GOVERNOR GP Parts scheme 2W2410 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-6523 C [1] PLUG  
2. 8N-3259 C [1] COVER-HIGH IDLE  
  6I-2003 C [1] GASKET  
3. 7N-2594 C [1] SETSCREW-SLOTTED  
  7N-8775 C [1] NUT-HIGH IDLE  
4. 5P-6945 C [2] BOLT (1/4-20X1.125-IN)  
  5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
5. 3J-7354 C [1] SEAL-O-RING  
6. 4N-5485 C [1] BODY-VALVE  
  5F-9144 C [1] SEAL-O-RING  
7. 4N-5484 C [1] VALVE-NEEDLE  
  6H-9691 C [1] SEAL-O-RING  
8. 0S-1616 C [6] BOLT (1/4-20X1-IN)  
9. 7N-8780 C [1] COVER AS-CONTROL  
10. 5P-3272 C [1] SEAL-LIP TYPE  
11. 7N-8779 C [1] GASKET-COVER  
12. 3P-0009 C [1] INSULATOR  
13. 1P-2497 C [2] BOLT-HEAD (10-24X1-IN)  
  8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
14. 8N-3258 C [1] COVER-LOAD STOP  
  6I-2004 C [1] GASKET  
15. 6D-3897 [1] BOLT (8-32X0.5-IN)  
16. 6L-5897 [2] BOLT (1/4-20X0.875-IN)  
17. 2W-6104 [1] BLOCK AS-STOP  
  2W-6103 [1] DOWEL  
18. 1W-4243 [1] SPRING-BUMPER  
19. 8N-2488 [1] BOLT-LOAD STOP  
20. 8N-3256 [1] COLLAR-LOAD STOP  
21. 8L-5832 [1] NUT-HEX (10-32-THD)  
22. 9Y-4701 [1] SETSCREW-SOCKET (10-32X1.38-IN)  
23. 2P-9556 [1] WASHER (1.17X1.5X0.06-IN THK)  
24. 1N-3800 [1] SLEEVE-RACK CONTROL  
25. 6N-3504 [1] SEAT-GOVERNOR SPRING  
26. 2W-2216 [1] SPRING-LINK  
27. 2M-7819 [2] RING-RETAINING  
28. 1N-3802 [1] SEAT-SPRING  
29. 8N-2507 [1] PISTON AS-SERVO  
  8N-2505 [1] VALVE-GOVERNOR SERVO  
  7N-7271 [1] LEVER-CONTROL  
  3G-3835 [1] PIN  
30. 1W-4098 C [1] PISTON-GOVERNOR SERVO  
31. 7W-0250 C [1] SLEEVE  
32. 5P-9757 [1] SEAL-O-RING  
33. 031-0216 [3] BOLT (1/4-20X0.75-IN)  
34. 4N-2953 [1] RING-LOCK  
35. 7E-4892 [2] RACE-THRUST BEARING  
36. 7M-7219 [1] BEARING-THRUST  
37. 4W-6868 [1] RISER-GOVERNOR  
38. 2N-0828 [2] WASHER  
39. 8N-2495 [1] HOUSING AS-GOVERNOR  
  8S-6814 [4] PIN  
  4F-6024 [2] PIN  
40. 8N-2503 [1] ACTUATOR AS-GOVERNOR  
  4N-6407 [1] SPOOL-DASHPOT  
  4N-6406 [1] RING-SPACER  
41. 4N-6404 [1] RING-RETAINING  
42. 7N-8785 C [1] SHAFT-PIVOT  
43. 8N-2496 C [1] GASKET-GOVERNOR HOUSING  
44. 7N-7270 C [2] SLEEVE-SPRING  
45. 7N-8821 C [3] RING-RETAINING  
46. 3K-5733 C [1] SPRING  
47. 8N-2501 C [1] HOUSING AS-GOVERNOR  
  7E-5346 [1] VALVE AS  
48. 8N-2499 C [1] SPRING-GUIDE  
49. 3D-8317 C [1] RING-RETAINING  
50. 4N-0260 C [1] SEAL-LIP TYPE  
51. 2F-2290 C [1] PLUG-CORE  
52. 8N-3945 [1] BUSHING-TERMINAL  
53. 4N-0432 C [1] BALL BEARING  
54. 7N-2594 C [1] SETSCREW-SLOTTED  
  7W-4272 C [1] NUT-SEALING (5/16-18-THD)  
55. 7N-2171 C [4] RING-RETAINING  
56. 7N-2172 C [2] PIN  
57. 8N-3087 C [1] STOP-IDLE DETENT  
58. 2W-7400 C [1] SPRING  
59. 2W-6102 C [1] LEVER-SPRING SEAT  
60. 8N-3168 C [1] LEVER-THROTTLE  
61. 2W-9305 C [2] PLATE-THROTTLE  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP64980117
 

2W-6559: GOVERNOR GP

2W-6559 GOVERNOR GP
S/N 6NC1-UP; R6J1-UP; 08Z1-UP; 10Z1-UP
PART OF 113-5342, 133-8923 PUMP GP-GOV & FUEL INJ
i00656108 SEBP6498
2W6559 GOVERNOR GP Parts scheme 2W6559 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-6523 [1] PLUG  
2. 8N-3259 [1] COVER-HIGH IDLE  
3. 371-6684 [1] SETSCREW (5/16-18X2-IN)  
3A. 371-6684 [1] SETSCREW (5/16-18X2-IN)  
4. 5P-6945 [2] BOLT (1/4-20X1.125-IN)  
5. 3J-7354 [1] SEAL-O-RING  
6. 9A-7377 [1] VALVE AS-NEEDLE (THROTTLE RESPONSE)  
  4N-5484 [1] VALVE-NEEDLE  
  4N-5485 [1] BODY-VALVE  
  5F-9144 [1] SEAL-O-RING  
  6H-9691 [1] SEAL-O-RING  
7. 6I-2003 [1] GASKET  
8. 0S-1616 [6] BOLT (1/4-20X1-IN)  
9. 7N-8780 [1] COVER AS-CONTROL  
9A. 138-9507 [1] SEAL-LIP TYPE  
10. 7N-8775 [1] NUT-HIGH IDLE  
11. 150-3728 [1] GASKET  
12. 3P-0009 [1] INSULATOR  
13. 1P-2497 [2] BOLT-HEAD (10-24X1-IN)  
14. 8N-3258 [1] COVER-LOAD STOP  
15. 2M-7819 [2] RING-RETAINING  
16. 7N-8785 [1] SHAFT-PIVOT  
17. 1N-3802 [1] SEAT-SPRING  
18. 2W-2216 [1] SPRING-LINK  
19. 1N-3800 [1] SLEEVE-RACK CONTROL  
20. 8N-2507 [1] PISTON AS-SERVO  
  7C-0791 [1] CYLINDER AS  
  8N-2505 [1] VALVE-GOVERNOR SERVO  
20A. 1W-4098 [1] PISTON-GOVERNOR SERVO  
20B. 7W-0250 [1] SLEEVE  
20C. 5P-9757 [1] SEAL-O-RING  
21. 5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
22. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
23. 7W-4272 [1] NUT-SEALING (5/16-18-THD)  
24. 031-0216 [3] BOLT (1/4-20X0.75-IN)  
25. 4N-2953 [1] RING-LOCK  
26. 7E-4892 [2] RACE-THRUST BEARING  
27. 7M-7219 [1] BEARING-THRUST  
28. 4W-6868 [1] RISER-GOVERNOR  
29. 4N-0432 [1] BALL BEARING  
30. 8N-2495 [1] HOUSING AS-GOVERNOR  
  8S-6814 [4] PIN (12.7MM .5IN LG)  
  4F-6024 [2] PIN (8MM .32IN LG)  
31. 8N-2503 [1] ACTUATOR AS-GOVERNOR  
  4N-6407 [1] SPOOL-DASHPOT  
  4N-6406 [1] RING-SPACER  
31A. 4N-6404 [1] RING-RETAINING  
32. 6I-2004 [1] GASKET  
33. 2P-9556 [1] WASHER (1.17X1.5X0.06-IN THK)  
34. 2N-0828 [2] WASHER  
35. 6N-3504 [1] SEAT-GOVERNOR SPRING  
36. 150-3730 [1] GASKET  
37. 8N-2501 [1] HOUSING AS-GOVERNOR  
  7E-5346 [1] VALVE AS (FUEL CHECK)  
  2F-2290 [1] PLUG-CORE  
  8N-3945 [1] BUSHING-TERMINAL  
37A. 8N-2499 [1] SPRING-GUIDE  
37B. 3D-8317 [1] RING-RETAINING  
37C. 4N-0260 [1] SEAL-LIP TYPE  
41. 7N-7270 [2] SLEEVE-SPRING  
42. 7N-8821 [3] RING-RETAINING  
43. 3K-5733 [1] SPRING  
44. 7N-7267 [1] SPRING  
45. 6D-3897 [1] BOLT (8-32X0.5-IN)  
46. 6L-5897 [2] BOLT (1/4-20X0.875-IN)  
47. 2W-6104 [1] BLOCK AS-STOP  
  8N-3303 [1] DOWEL  
48. 1W-4243 [1] SPRING-BUMPER  
49. 2W-5161 [1] BOLT-LOAD STOP  
50. 8N-3256 [1] COLLAR-LOAD STOP  
51. 9Y-4701 C [1] SETSCREW-SOCKET (10-32X1.38-IN)  
52. 2W-6102 [1] LEVER-SPRING SEAT  
53. 2W-7400 [1] SPRING  
54. 8N-3087 [1] STOP-IDLE DETENT  
55. 7N-2172 [2] PIN  
56. 7N-2171 [4] RING-RETAINING  
57. 8L-5832 C [1] NUT-HEX (10-32-THD)  
58. 2W-9305 [2] PLATE-THROTTLE  
59. 8N-3168 [1] LEVER-THROTTLE  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP64980118
 

7W-1488: GOVERNOR GP

7W-1488 GOVERNOR GP
S/N 6NC1-UP; 08Z1-UP; 10Z1-UP
PART OF 2W-0258, 2W-6229 PUMP GP-GOV & FUEL INJ
i00143547 SEBP6498
7W1488 GOVERNOR GP Parts scheme 7W1488 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6D-3897 [1] BOLT (8-32X0.5-IN)  
2. 6L-5897 [2] BOLT (1/4-20X0.875-IN)  
3. 2W-6104 [1] BLOCK AS-STOP  
  2W-6103 [1] DOWEL  
4. 1W-4243 [1] SPRING-BUMPER  
5. 2W-5161 [1] BOLT-LOAD STOP  
6. 8N-3256 [1] COLLAR-LOAD STOP  
7. 8L-5832 C [1] NUT-HEX (10-32-THD)  
8. 5H-6552 [1] SETSCREW-SOCKET (10-32X1.25-IN)  
    -OR-
  9Y-4701 C [1] SETSCREW-SOCKET (10-32X1.38-IN)  
9. 8N-3258 [1] COVER-LOAD STOP  
  6I-2004 [1] GASKET  
10. 1P-2497 [2] BOLT-HEAD (10-24X1-IN)  
  8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
11. 3P-0009 [1] INSULATOR  
12. 7N-2594 [1] SETSCREW-SLOTTED  
  7N-8775 [1] NUT-HIGH IDLE  
13. 4N-5485 [1] BODY-VALVE  
14. 4N-5484 [1] VALVE-NEEDLE  
15. 6H-9691 [1] SEAL-O-RING  
16. 5F-9144 [1] SEAL-O-RING  
17. 1W-6523 [1] PLUG  
18. 8N-3259 [1] COVER-HIGH IDLE  
  6I-2003 [1] GASKET  
19. 5P-6945 C [2] BOLT (1/4-20X1.125-IN)  
  5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
20. 3J-7354 [1] SEAL-O-RING  
21. 0S-1616 C [6] BOLT (1/4-20X1-IN)  
22. 7N-8780 [1] COVER AS-CONTROL  
23. 5P-3272 [1] SEAL-LIP TYPE  
24. 7N-8779 [1] GASKET-COVER  
25. 8N-2501 [1] HOUSING AS-GOVERNOR (REAR)  
  7E-5346 [1] VALVE AS  
  2F-2290 [1] PLUG-CORE  
  8N-3945 [1] BUSHING-TERMINAL  
26. 4N-0260 [1] SEAL-LIP TYPE  
27. 3D-8317 [1] RING-RETAINING  
28. 8N-2499 [1] SPRING-GUIDE  
29. 7N-8821 [1] RING-RETAINING  
30. 7W-2000 C [1] STOP-DETENT  
31. 6V-8137 [2] SCREW-BUTTON HEAD (10-24X1-IN)  
  7W-1318 [1] PLATE-RETAINING  
32. 2W-7400 [1] SPRING  
33. 2W-9996 [1] SCREW-IDLE STOP (1/4-20X1.25-IN)  
  7W-4272 C [1] NUT-SEALING (5/16-18-THD)  
34. 8N-2496 [1] GASKET-GOVERNOR HOUSING  
35. 1N-3800 [1] SLEEVE-RACK CONTROL  
36. 6N-3504 [1] SEAT-GOVERNOR SPRING  
37. 2W-2216 [1] SPRING-LINK  
38. 2M-7819 [2] RING-RETAINING  
39. 1N-3802 [1] SEAT-SPRING  
40. 8N-2507 [1] PISTON AS-SERVO  
  8N-2505 [1] VALVE-GOVERNOR SERVO  
  7C-0791 C [1] CYLINDER AS  
  7N-7271 [1] LEVER-CONTROL  
  3G-3835 [1] PIN  
41. 1W-4098 [1] PISTON-GOVERNOR SERVO  
42. 7W-0250 C [1] SLEEVE  
43. 5P-9757 [1] SEAL-O-RING  
44. 031-0216 [3] BOLT (1/4-20X0.75-IN)  
45. 4N-2953 [1] RING-LOCK  
46. 7E-4892 [2] RACE-THRUST BEARING  
47. 7M-7219 [1] BEARING-THRUST  
48. 4W-6868 [1] RISER-GOVERNOR  
49. 4N-0432 [1] BALL BEARING  
50. 8N-2495 [1] HOUSING AS-GOVERNOR  
  8S-6814 [4] PIN (12.7MM LG)  
  4F-6024 [2] PIN (8MM LG)  
51. 8N-2503 [1] ACTUATOR AS-GOVERNOR  
  4N-6408 [1] PISTON AS  
  4N-6407 [1] SPOOL-DASHPOT  
  4N-6406 [1] RING-SPACER  
52. 4N-6404 [1] RING-RETAINING  
53. 2P-9556 [1] WASHER (1.17X1.5X0.06-IN THK)  
54. 2N-0828 [2] WASHER  
55. 7N-8785 [1] SHAFT-PIVOT  
56. 7N-8821 [2] RING-RETAINING  
57. 7N-7270 [2] SLEEVE-SPRING  
58. 3K-5733 [1] SPRING  
59. 7N-7267 [1] SPRING  
60. 2W-9305 [1] PLATE-THROTTLE  
61. 7W-1321 [1] PLATE-THROTTLE  
62. 8N-3168 [1] LEVER-THROTTLE  
63. 2W-6102 [1] LEVER-SPRING SEAT  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP64980119
 

392-9232: KIT-FUEL INJECTION PUMP

392-9232 KIT-FUEL INJECTION PUMP
S/N 3WC1-UP
OPTIONAL REBUILD FUEL PUMP KIT FOR 3306 ENGINE
FOR USE WITH @@@@@ 2W-0819@@@@@, @@@@@ 7W-1766@@@@@, @@@@@ 2W-0820@@@@@
FIELD INSTALLATION
i05266071 SEBP6498
  For full view, you need register

Parts for your 140G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1W-6539 Y [6] PUMP GP-FUEL INJECTION  
   
  4N-0432 [1] BALL BEARING  
  1S-1953 [1] BEARING-RACK  
  1W-3285 [1] BEARING-RACK  
  7L-3326 [1] BEARING-THRUST  
  7M-7219 [1] BEARING-THRUST  
  4P-9828 [1] BUSHING  
  7N-7970 [1] BUSHING  
  8N-3945 [1] BUSHING-TERMINAL  
  8N-5117 [6] BUSHING-TERMINAL  
  5F-2807 [6] CAP-SEALING  
  6I-1564 [1] DIAPHRAGM  
  1S-5440 [4] DOWEL  
  4N-9019 [1] DOWEL  
  6I-2003 [1] GASKET  
  6I-2004 [1] GASKET  
  7N-9520 [1] GASKET  
  144-0477 [1] GASKET  
  150-3724 [1] GASKET  
  150-3726 [1] GASKET  
  150-3728 [1] GASKET  
  150-3730 [1] GASKET  
  150-3727 [1] GASKET-FUEL  
  3P-0009 [1] INSULATOR  
  7W-4272 [1] NUT-SEALING (5/16-18-THD)  
  7N-2172 [2] PIN  
  1W-4098 [1] PISTON-GOVERNOR SERVO  
  7E-4892 [2] RACE-THRUST BEARING  
  7N-7166 [2] RACE-THRUST BEARING  
  4N-2953 [1] RING-LOCK  
  2M-7819 [2] RING-RETAINING  
  3D-8317 [1] RING-RETAINING  
  7N-2171 [4] RING-RETAINING  
  7N-8421 [1] RING-RETAINING  
  7N-8821 [3] RING-RETAINING  
  8F-4610 [1] RING-RETAINING  
  8N-6680 [1] SCREEN AS  
  8N-5763 [1] SEAL  
  4N-0260 [1] SEAL-LIP TYPE  
  138-9507 [1] SEAL-LIP TYPE  
  2D-6392 [1] SEAL-O-RING  
  2H-3934 [1] SEAL-O-RING  
  3E-6760 [1] SEAL-O-RING  
  3J-1907 [3] SEAL-O-RING  
  3J-7354 [1] SEAL-O-RING  
  4J-7533 [2] SEAL-O-RING  
  4J-8997 [1] SEAL-O-RING  
  5F-9144 [1] SEAL-O-RING  
  5P-6620 [1] SEAL-O-RING  
  5P-6718 [1] SEAL-O-RING  
  5P-8210 [1] SEAL-O-RING  
  5P-9757 [1] SEAL-O-RING  
  6H-9691 [1] SEAL-O-RING  
  8J-8343 [1] SEAL-O-RING  
  8M-8515 [1] SEAL-O-RING  
  033-5879 [1] SEAL-O-RING  
  061-9458 [1] SEAL-O-RING  
  114-8718 [6] SEAL-O-RING  
  6V-6921 [1] SEAL-RING  
  6N-3504 [1] SEAT-GOVERNOR SPRING  
  8N-3088 [1] SHAFT AS-THROTTLE  
  8N-2510 [1] SHAFT-WEIGHT CARRIER  
  7W-0250 [1] SLEEVE  
  4W-6869 [6] SPACER (27X32.54X5.049-MM THK)  
  2N-2878 [1] SPRING  
  2W-7400 [1] SPRING  
  3K-5733 [1] SPRING  
  7L-8056 [1] SPRING  
  8L-9790 [1] SPRING  
  8M-9140 [1] SPRING  
  8M-9141 [1] SPRING  
  8N-9594 [1] SPRING  
  9N-1754 [1] SPRING  
  7L-4958 [1] SPRING-GOVERNOR  
  8N-2499 [1] SPRING-GUIDE  
  7E-5346 [1] VALVE AS  
  8N-2505 [1] VALVE-GOVERNOR SERVO  
  2N-0828 [2] WASHER  
  8H-9204 [6] WASHER-FELT (19/32X7/8X5/16-IN THK)  
  7N-7264 [4] WEIGHT-GOVERNOR  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Truck Engine News
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/01
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Engine News
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2002/12/01
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22
Special Instruction
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Installation Instructions for Turbochargers {1052}
Installation Instructions for Turbochargers {1052}
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Disassembly and Assembly
Turbocharger - Disassemble
3304B and 3306B Engines for Caterpillar Built Machines
Turbocharger - Assemble
3304B and 3306B Engines for Caterpillar Built Machines
Turbocharger - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Turbocharger - Install
3304B and 3306B Engines for Caterpillar Built Machines
Service Magazine
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2003/02/24
Policy for Reusing the Turbocharger Turbine Housing {1065}
2003/07/14
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2003/12/15
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/20
Troubleshooting the Wastegate Canister {1052, 1057}
2009/01/26
Accurate Diagnosis of Turbocharger Failure on Caterpillar Engines {1052, 1053}
2010/03/22

Caterpillar Parts SIS Catalog 140G :

TURBOCHARGER GP
7N-7748 TURBOCHARGER GP
TURBOCHARGER GP
7C-8657 TURBOCHARGER GP
TURBOCHARGER GP
7C-8632 TURBOCHARGER GP
TURBOCHARGER GP
219-1911 TURBOCHARGER GP
TURBOCHARGER GP
1N-3079 TURBOCHARGER GP
TURBOCHARGER GP
113-5340 TURBOCHARGER GP
MANIFOLD GP-EXHAUST
6N-0164 MANIFOLD GP-EXHAUST
MANIFOLD GP-EXHAUST
2P-6572 MANIFOLD GP-EXHAUST
TURBOCHARGER GP
8N-9247 TURBOCHARGER GP
CONTROL GP-FUEL RATIO
111-5162 CONTROL GP-FUEL RATIO
COVER GP-TACHOMETER DRIVE
1W-2481 COVER GP-TACHOMETER DRIVE
FASTENER GP-FUEL INJ PUMP
7C-8993 FASTENER GP-FUEL INJ PUMP
FILTER GP-SECONDARY FUEL
2W-3282 FILTER GP-SECONDARY FUEL
GOVERNOR GP
2W-2410 GOVERNOR GP
GOVERNOR GP
2W-6559 GOVERNOR GP
GOVERNOR GP
7W-1488 GOVERNOR GP

Truck sale:

Caterpillar 140G
 
Caterpillar 140G
- motor graders
ZIEGLER CAT
Caterpillar 140G, motor graders, Construction
68,000 
Caterpillar 140G, motor graders, Construction
- motor graders
MICHIGAN CAT
Caterpillar 140 GC, motor graders, Construction
225,000 
Caterpillar 140 GC, motor graders, Construction
- motor graders
KELLY TRACTOR CO.
Caterpillar 140 GC, motor graders, Construction
247,000 
Caterpillar 140 GC, motor graders, Construction
- motor graders
KELLY TRACTOR CO.
Caterpillar 140G, motor graders, Construction
69,000 
Caterpillar 140G, motor graders, Construction
- motor graders
ZIEGLER CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.