AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

487-5925 JAW GP-DEMOLITION S/N JGT1-UP PART OF 487-5924 JAW AR-DEMOLITION MP318 MULTI PROCESSOR JAW



WORK TOOLS
JAW GP

WORK TOOLS
JAW GP

MULTI PROCESSOR JAW MP318 MULTI PROCESSOR JAW J1A
 MP318, MP324, MP332, MP345 & MP365 Multi-Processor Jaws J1A00001-UP (MACHINE) SEBP6506 MP318 J1A   (2013)

WORK TOOLS

JAW GP
 

#SEBP65060040
 

487-5925: JAW GP-DEMOLITION

487-5925 JAW GP-DEMOLITION
S/N JGT1-UP
PART OF 487-5924 JAW AR-DEMOLITION
i07400183 SEBP6506
  For full view, you need register

Parts for your MP318 MULTI PROCESSOR JAW:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
 

#SEBP65060041
 

388-0001: JAW GP-PULVERIZER

388-0001 JAW GP-PULVERIZER
S/N J1B1-363
PART OF 388-0000 JAW AR-PULVERIZER
i05281229 SEBP6506
3880001 JAW GP-PULVERIZER Parts scheme
  For full view, you need register

Parts for your MP318 MULTI PROCESSOR JAW:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5W-2817 [2] FITTING-GREASE  
2. 9W-8551 [2] TIP-SHORT (HEAVY-DUTY)  
3. 107-3378 [2] PIN  
4. 107-8559 [9] RETAINER AS  
5. 169-0386 B [4] SHIM (1-MM THK)  
6. 169-0388 B [2] SHIM (1.5-MM THK)  
7. 169-7112 B [2] SHIM (2.5-MM THK)  
8. 169-7113 B [2] SHIM (3-MM THK)  
9. 169-7114 B [2] SHIM (3.5-MM THK)  
10. 280-9200 [3] TOOTH  
11. 322-4714 [2] EDGE-CUTTING  
12. 382-5761 [2] BUSHING  
13. 386-9834 [1] PIN  
14. 386-9835 [1] PIN  
15. 386-9836 M [1] NUT (M130X4-THD)  
16. 388-0003 [1] JAW AS (LOWER)  
17. 388-0025 [1] JAW AS (UPPER)  
17A. 192-5240 [1] PLATE-HOLDER (SERIAL NUMBER)  
18. 388-0044 [1] PLATE AS-CRUSHER  
19. 388-0053 [3] PIN  
20. 388-0054 [4] PIN  
21. 388-0056 [1] SPACER  
22. 391-4287 [5] PLATE-WEAR  
23. 391-4288 [1] PLATE AS  
24. 391-4289 [4] BLOCK-SUPPORT  
25. 420-3972 [1] SPACER (35X54X24.7-MM THK)  
26. 422-7076 [1] TOOTH AS-RIPPER  
27. 101-7401 M [8] BOLT-SOCKET HEAD (M10X1.5X20-MM)  
28. 109-6494 [2] RING-RETAINING  
29. 174-6481 M [1] BOLT-SOCKET HEAD (M30X3.5X120-MM)  
30. 8T-5042 M [6] BOLT (M20X2.5X50-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP65060042
 

388-0001: JAW GP-PULVERIZER

388-0001 JAW GP-PULVERIZER
S/N J1B364-UP
PART OF 388-0000 JAW AR-PULVERIZER
i06671469 SEBP6506
3880001 JAW GP-PULVERIZER Parts scheme
  For full view, you need register

Parts for your MP318 MULTI PROCESSOR JAW:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5W-2817 [2] FITTING-GREASE  
2. 9W-8551 [2] TIP-SHORT (HEAVY-DUTY)  
3. 107-3378 [2] PIN  
4. 107-8559 [9] RETAINER AS  
5. 169-0386 B [4] SHIM (1-MM THK)  
6. 169-0388 B [2] SHIM (1.5-MM THK)  
7. 169-7112 B [2] SHIM (2.5-MM THK)  
8. 169-7113 B [2] SHIM (3-MM THK)  
9. 169-7114 B [2] SHIM (3.5-MM THK)  
10. 280-9200 [3] TOOTH  
11. 322-4714 [2] EDGE-CUTTING  
12. 382-5761 [2] BUSHING  
13. 386-9834 [1] PIN  
14. 386-9835 [1] PIN  
15. 386-9836 M [1] NUT (M130X4-THD)  
16. 388-0003 [1] JAW AS (LOWER)  
17. 388-0025 [1] JAW AS (UPPER)  
17A. 192-5240 [1] PLATE-HOLDER (SERIAL NUMBER)  
18. 388-0044 [1] PLATE AS-CRUSHER  
19. 388-0053 [3] PIN  
20. 388-0054 [4] PIN  
21. 388-0056 [1] SPACER  
22. 391-4287 [5] PLATE-WEAR  
23. 391-4288 [1] PLATE AS  
24. 391-4289 [4] BLOCK-SUPPORT  
25. 420-3972 [1] SPACER (35X54X24.7-MM THK)  
26. 437-3690 C [1] TOOTH AS-RIPPER  
27. 101-7401 M [8] BOLT-SOCKET HEAD (M10X1.5X20-MM)  
28. 109-6494 [2] RING-RETAINING  
29. 8T-0370 CM [1] BOLT (M30X3.5X140-MM)  
30. 8T-5042 M [6] BOLT (M20X2.5X50-MM)  
31. 8C-8722 CM [1] NUT (M30X3.5-THD)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP65060043
 

420-3966: JAW GP-PULVERIZER

420-3966 JAW GP-PULVERIZER
S/N J1A1-221
PART OF 419-9178 JAW AR-PULVERIZER
i05281667 SEBP6506
4203966 JAW GP-PULVERIZER Parts scheme
  For full view, you need register

Parts for your MP318 MULTI PROCESSOR JAW:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5W-2817 [2] FITTING-GREASE  
2. 9W-8551 [2] TIP-SHORT (HEAVY-DUTY)  
3. 107-3378 [2] PIN  
4. 107-8559 [9] RETAINER AS  
5. 169-0379 B [2] SHIM (2.5-MM THK)  
6. 169-0380 B [2] SHIM (3-MM THK)  
7. 169-0381 B [2] SHIM (3.5-MM THK)  
8. 169-0386 B [5] SHIM (1-MM THK)  
9. 169-0388 B [2] SHIM (1.5-MM THK)  
10. 313-1305 [3] TOOTH  
11. 322-4714 [2] EDGE-CUTTING  
12. 382-5760 [2] BUSHING  
13. 399-1973 [1] PIN  
14. 399-1974 [1] PIN  
15. 399-1978 [5] PLATE-WEAR  
16. 399-4290 M [1] NUT (M120X4-THD)  
17. 415-7052 [1] JAW AS (LOWER)  
18. 415-7053 [1] JAW AS (UPPER)  
18A. 192-5240 [1] PLATE-HOLDER (SERIAL NUMBER)  
19. 415-7270 [3] PIN  
20. 420-3969 [1] TOOTH AS-RIPPER  
21. 420-3970 [1] SPACER  
22. 420-3972 [1] SPACER (35X54X24.7-MM THK)  
23. 420-3977 [4] BLOCK-SUPPORT  
24. 420-3978 [1] PLATE AS-CRUSHER  
25. 420-3989 [1] BLOCK-WEAR  
26. 420-7438 [4] PIN  
27. 101-7401 M [8] BOLT-SOCKET HEAD (M10X1.5X20-MM)  
28. 133-2903 [2] RING-RETAINING  
29. 174-6481 M [1] BOLT-SOCKET HEAD (M30X3.5X120-MM)  
30. 7Y-5221 M [3] BOLT-SOCKET HEAD (M20X2.5X45-MM)  
31. 8T-7078 M [3] BOLT-SOCKET HEAD (M20X2.5X40-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP65060044
 

420-3966: JAW GP-PULVERIZER

420-3966 JAW GP-PULVERIZER
S/N J1A222-UP
PART OF 419-9178 JAW AR-PULVERIZER
i06054326 SEBP6506
4203966 JAW GP-PULVERIZER Parts scheme
  For full view, you need register

Parts for your MP318 MULTI PROCESSOR JAW:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5W-2817 [2] FITTING-GREASE  
2. 9W-8551 J [2] TIP-SHORT (HEAVY-DUTY)  
3. 107-3378 J [2] PIN  
4. 107-8559 J [9] RETAINER AS  
5. 169-0379 B [2] SHIM (2.5-MM THK)  
6. 169-0380 B [2] SHIM (3-MM THK)  
7. 169-0381 B [2] SHIM (3.5-MM THK)  
8. 169-0386 BJ [5] SHIM (1-MM THK)  
9. 169-0388 BJ [2] SHIM (1.5-MM THK)  
10. 313-1305 J [3] TOOTH  
11. 322-4714 J [2] EDGE-CUTTING  
12. 382-5760 [2] BUSHING  
13. 399-1973 [1] PIN  
14. 399-1974 [1] PIN  
15. 399-1978 J [5] PLATE-WEAR  
16. 399-4290 M [1] NUT (M120X4-THD)  
17. 415-7052 [1] JAW AS (LOWER)  
18. 415-7053 [1] JAW AS (UPPER)  
18A. 192-5240 [1] PLATE-HOLDER (SERIAL NUMBER)  
19. 415-7270 J [3] PIN  
20. 437-3698 CJ [1] TOOTH AS-RIPPER  
21. 420-3970 [1] SPACER  
22. 420-3972 J [1] SPACER (35X54X24.7-MM THK)  
23. 420-3977 [4] BLOCK-SUPPORT  
24. 420-3978 J [1] PLATE AS-CRUSHER  
25. 420-3989 J [1] BLOCK-WEAR  
26. 420-7438 J [4] PIN  
27. 101-7401 M [8] BOLT-SOCKET HEAD (M10X1.5X20-MM)  
28. 133-2903 [2] RING-RETAINING  
29. 8T-0370 CJM [1] BOLT (M30X3.5X140-MM)  
30. 7Y-5221 JM [3] BOLT-SOCKET HEAD (M20X2.5X45-MM)  
31. 8T-7078 JM [3] BOLT-SOCKET HEAD (M20X2.5X40-MM)  
32. 8C-8722 CJM [1] NUT (M30X3.5-THD)  
   
    AVAILABLE REPAIR KIT(S):
  487-7483 J [1] KIT-PARTS (WEAR)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP65060045
 

459-3007: JAW GP-PULVERIZER

459-3007 JAW GP-PULVERIZER
S/N JGE1-UP
PART OF 459-3004 JAW AR-PULVERIZER
i07397818 SEBP6506
  For full view, you need register

Parts for your MP318 MULTI PROCESSOR JAW:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
 

#SEBP65060046
 

491-1013: JAW GP-PULVERIZER

491-1013 JAW GP-PULVERIZER
S/N JGT1-UP
PART OF 491-1012 JAW AR-PULVERIZER
i07400151 SEBP6506
  For full view, you need register

Parts for your MP318 MULTI PROCESSOR JAW:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
 

#SEBP65060047
 

493-4353: JAW GP-PULVERIZER

493-4353 JAW GP-PULVERIZER
S/N JZD1-UP
PART OF 467-3614 JAW AR-PULVERIZER
i07399557 SEBP6506
  For full view, you need register

Parts for your MP318 MULTI PROCESSOR JAW:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
 

#SEBP65060048
 

399-4295: JAW GP-SHEAR

399-4295 JAW GP-SHEAR
S/N J1A1-UP
PART OF 399-4291 JAW AR-SHEAR
i05281505 SEBP6506
3994295 JAW GP-SHEAR Parts scheme
  For full view, you need register

Parts for your MP318 MULTI PROCESSOR JAW:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5W-2817 [2] FITTING-GREASE  
2. 169-0378 [1] SPACER (128X139X30-MM THK)  
3. 169-0379 B [2] SHIM (2.5-MM THK)  
4. 169-0380 B [2] SHIM (3-MM THK)  
5. 169-0381 B [2] SHIM (3.5-MM THK)  
6. 169-0386 BJ [12] SHIM (1-MM THK)  
7. 169-0388 BJ [4] SHIM (1.5-MM THK)  
8. 236-7874 J [12] BUSHING (LOCK)  
9. 250-1069 J [1] PLATE-WEAR  
10. 322-0059 BJ [10] SHIM (1-MM THK)  
11. 322-0060 BJ [2] SHIM (1.5-MM THK)  
12. 322-0061 J [1] CUTTER  
13. 322-4714 J [4] EDGE-CUTTING  
14. 382-5760 [2] BUSHING  
15. 399-1973 [1] PIN  
16. 399-1974 [1] PIN  
17. 399-4290 M [1] NUT (M120X4-THD)  
18. 399-4296 [1] JAW AS (LOWER)  
18A. 450-5915 [2] PLATE-WEAR  
19. 399-4297 [1] JAW AS (UPPER)  
19A. 192-5240 [1] PLATE-HOLDER (SERIAL NUMBER)  
19B. 294-0198 [1] TIP-WEAR  
20. 399-4298 J [2] CUTTER  
21. 101-7401 M [8] BOLT-SOCKET HEAD (M10X1.5X20-MM)  
22. 133-2903 [2] RING-RETAINING  
23. 7Y-5216 JM [2] BOLT-SOCKET HEAD (M20X2.5X80-MM)  
24. 7Y-5221 JM [8] BOLT-SOCKET HEAD (M20X2.5X45-MM)  
25. 7Y-5241 JM [6] BOLT-SOCKET HEAD (M20X2.5X60-MM)  
26. 8T-2393 JM [3] BOLT-SOCKET HEAD (M16X2X60-MM)  
27. 8T-4123 J [2] WASHER (3.62X5.75X0.375-MM THK)  
28. 8T-4141 JM [2] BOLT (M20X2.5X70-MM)  
   
    AVAILABLE REPAIR KIT(S):
  487-7479 J [1] KIT-PARTS (WEAR)  
  B   USE AS REQUIRED
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP65060049
 

417-0591: JAW GP-SHEAR

417-0591 JAW GP-SHEAR
S/N J1B1-UP
PART OF 417-0589 JAW AR-SHEAR
i05281515 SEBP6506
4170591 JAW GP-SHEAR Parts scheme
  For full view, you need register

Parts for your MP318 MULTI PROCESSOR JAW:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5W-2817 [2] FITTING-GREASE  
2. 169-7112 B [2] SHIM (2.5-MM THK)  
3. 169-7113 B [2] SHIM (3-MM THK)  
4. 169-7114 B [2] SHIM (3.5-MM THK)  
5. 169-7118 BJ [12] SHIM (1-MM THK)  
6. 169-7119 BJ [4] SHIM (1.5-MM THK)  
7. 236-1947 J [1] CUTTER  
8. 236-7874 J [14] BUSHING (LOCK)  
9. 236-9713 BJ [6] SHIM (1-MM THK)  
10. 236-9714 BJ [2] SHIM (1.5-MM THK)  
11. 250-1068 J [1] PLATE-WEAR  
12. 315-0193 J [4] EDGE-CUTTING  
13. 322-4714 J [2] EDGE-CUTTING  
14. 382-5761 [2] BUSHING  
15. 386-9834 [1] PIN  
16. 386-9835 [1] PIN  
17. 386-9836 M [1] NUT (M130X4-THD)  
18. 417-0592 [1] JAW AS (LOWER)  
18A. [2] PLATE-WEAR  
19. 417-0593 [1] JAW AS (UPPER)  
19A. 192-5240 [1] PLATE-HOLDER (SERIAL NUMBER)  
19B. 294-0714 [1] TIP-WEAR  
20. 101-7401 M [8] BOLT-SOCKET HEAD (M10X1.5X20-MM)  
21. 109-6494 [2] RING-RETAINING  
22. 169-7111 [1] SPACER (143X159X42-MM THK)  
23. 7Y-5216 JM [3] BOLT-SOCKET HEAD (M20X2.5X80-MM)  
24. 7Y-5217 JM [8] BOLT-SOCKET HEAD (M20X2.5X70-MM)  
25. 7Y-5221 JM [9] BOLT-SOCKET HEAD (M20X2.5X45-MM)  
26. 8T-1447 JM [3] BOLT-SOCKET HEAD (M16X2X70-MM)  
   
    AVAILABLE REPAIR KIT(S):
  487-7481 J [1] KIT-PARTS (WEAR)  
  B   USE AS REQUIRED
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog MP318 :

Truck sale:

Caterpillar MP318
 
Caterpillar MP318
- shear
ZEPPELIN BAUMASCHINEN
Caterpillar MP318
 
Caterpillar MP318
- shear
ZEPPELIN BAUMASCHINEN
 
 
CATERPILLAR MP318
- MISCELLANEOUS
BERGERAT MONNOYEUR
117 RUE CHARLES MICHELS - ST DENIS -
CATERPILLAR MP318
 
CATERPILLAR MP318
- SHEAR
ZEPPELIN BAUMASCHINEN
Gebrauchtmaschinen Pool Karl-Bröger-Strasse 8 - Alsfeld
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.