348-3285 CRANKSHAFT GP S/N D7A1-UP PART OF 425-0779 CYLINDER BLOCK GP-SHORT, 417-3389 ENGINE AR-PRIMARY 320D2





BASIC ENGINE

CRANKSHAFT GP
 

#SEBP65140020
 

348-3285: CRANKSHAFT GP

348-3285 CRANKSHAFT GP
S/N D7A1-UP
PART OF 425-0779 CYLINDER BLOCK GP-SHORT, 417-3389 ENGINE AR-PRIMARY
i05301976 SEBP6514
  For full view, you need register

Parts for your 320D2 EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. L [7] BEARING-CRANKSHAFT (STANDARD-UPPER)  
2. L [7] BEARING-CRANKSHAFT (STANDARD-LOWER)  
3. 363-0559 J [2] WASHER-THRUST  
4. 376-4074 [1] CRANKSHAFT  
5. 067-6135 [1] KEY-WOODRUFF  
6. 276-7391 [1] GEAR (34-TEETH)  
   
    AVAILABLE REPAIR KIT(S):
  448-4217 L [1] KIT-BEARING (STANDARD)(CRANKSHAFT)  
    (INCLUDES BEARINGS)
  454-3745 AB [1] KIT-BEARING (0.254-MM US)  
    (INCLUDES BEARINGS)
  454-3931 AB [1] KIT-BEARING (0.508-MM US)  
    (INCLUDES BEARINGS)
  454-3935 AB [1] KIT-BEARING (0.762-MM US)  
    (INCLUDES BEARINGS)
  364-5145 J [1] KIT-WASHER (STANDARD)(CRANKSHAFT)  
    (INCLUDES WASHERS)
  448-4227 AB [1] KIT-WASHER (0.20-MM US)  
    (INCLUDES WASHERS)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  J   KIT MARKED J SERVICES PART(S) MARKED J
  L   KIT MARKED L SERVICES PART(S) MARKED L
 

#SEBP65140021
 

331-1682: CYLINDER BLOCK AS

331-1682 CYLINDER BLOCK AS
S/N D7A1-UP
PART OF 348-3283 CYLINDER BLOCK GP
i05302633 SEBP6514
  For full view, you need register

Parts for your 320D2 EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 067-6043 [7] PLUG-SIDE  
2. 185-0884 [2] DOWEL  
3. 225-8858 [2] PLUG  
4. 232-7597 [2] PLUG  
5. 232-7599 [2] PLUG  
6. 276-5602 [2] PLUG-CORE  
7. 232-7596 [1] PLUG  
8. 067-6823 [1] PLUG  
9. 276-5600 [14] BOLT-SPECIAL (BEARING CAP)  
10. 370-6545 [1] BUSHING-CAMSHAFT  
 

#SEBP65140022
 

348-3283: CYLINDER BLOCK GP

348-3283 CYLINDER BLOCK GP
S/N D7A1-UP
PART OF 425-0779 CYLINDER BLOCK GP-SHORT, 417-3389 ENGINE AR-PRIMARY
i05302629 SEBP6514
  For full view, you need register

Parts for your 320D2 EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 209-9219 M [10] BOLT (M8X1.25X16-MM)  
2. 232-1322 [1] PLUG  
3. 276-5603 [1] SEAL-O-RING  
4. 331-1682 Y [1] CYLINDER BLOCK AS  
5. 232-7449 [1] HOUSING AS  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP65140023
 

425-0779: CYLINDER BLOCK GP-SHORT

425-0779 CYLINDER BLOCK GP-SHORT
S/N D7A1-UP
PART OF 417-3389 ENGINE AR-PRIMARY
i05532830 SEBP6514
  For full view, you need register

Parts for your 320D2 EXCAVATOR:

Pos. Part No Qty Parts name Comments
  348-3285 Y [1] CRANKSHAFT GP  
  348-3283 Y [1] CYLINDER BLOCK GP  
  348-3503 Y [1] JET GP-PISTON COOLING  
  348-3300 Y [1] PISTON & ROD GP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP65140024
 

391-3193: CYLINDER HEAD GP

391-3193 CYLINDER HEAD GP
S/N D7A1-UP
PART OF 425-3316 CYLINDER HEAD GP, 417-3389 ENGINE AR-PRIMARY
i05302637 SEBP6514
  For full view, you need register

Parts for your 320D2 EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 335-7055 [14] BOLT  
2. 359-6616 [1] GASKET (CYLINDER HEAD)  
3. 450-9263 [1] CYLINDER HEAD GP  
  067-6006 [6] PLUG  
  335-6264 [12] GUIDE-VALVE  
  343-4295 [8] PLUG  
 

#SEBP65140025
 

425-3316: CYLINDER HEAD GP

425-3316 CYLINDER HEAD GP
S/N D7A1-UP
PART OF 417-3389 ENGINE AR-PRIMARY
i05533022 SEBP6514
  For full view, you need register

Parts for your 320D2 EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 391-3193 Y [1] CYLINDER HEAD GP  
2. 438-3180 Y [1] ROCKER ARM GP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP65140026
 

394-7014: DRAIN GP-ENGINE OIL

394-7014 DRAIN GP-ENGINE OIL
S/N D7A1-UP
PART OF 417-3389 ENGINE AR-PRIMARY
i05302661 SEBP6514
  For full view, you need register

Parts for your 320D2 EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 3K-0360 [1] SEAL-O-RING  
2. 6V-7238 [1] VALVE-SHUTOFF  
 

#SEBP65140027
 

396-6979: DRIVE GP-FAN

396-6979 DRIVE GP-FAN
S/N D7A1-UP
PART OF 417-3389 ENGINE AR-PRIMARY
i05302662 SEBP6514
  For full view, you need register

Parts for your 320D2 EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 6I-0593 M [10] BOLT (M10X1.5X30-MM)  
2. 321-9994 [1] DRIVE AS-FAN  
2A. 176-0773 [1] CLIP  
3. 348-5434 [1] IDLER AS  
4. 379-2023 [1] BRACKET  
5. 388-1869 [1] BRACKET AS  
5A. 339-8780 [1] DOWEL  
5B. [1] BRACKET  
6. 6I-0654 M [3] BOLT (M10X1.5X25-MM)  
7. 273-9292 M [2] BOLT (M16X2X65-MM)  
8. 277-6078 [1] BRACKET  
  M   METRIC PART
 

#SEBP65140028
 

371-2539: FLYWHEEL GP

371-2539 FLYWHEEL GP
S/N D7A1-UP
PART OF 417-3389 ENGINE AR-PRIMARY
i05302970 SEBP6514
  For full view, you need register

Parts for your 320D2 EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 145-4911 [12] WASHER  
2. 378-4739 [1] FLYWHEEL AS  
  277-0588 [1] GEAR-STARTING MOTOR RING (134-TEETH)  
3. 0S-1603 [12] BOLT (1/2-20X1.5-IN)  
 

#SEBP65140029
 

396-6954: HOUSING GP-FLYWHEEL

396-6954 HOUSING GP-FLYWHEEL
S/N D7A1-UP
PART OF 417-3389 ENGINE AR-PRIMARY
i05302667 SEBP6514
  For full view, you need register

Parts for your 320D2 EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 6I-0917 M [2] BOLT (M6X1X25-MM)  
2. 354-8322 [1] PLUG  
3. 283-4662 [2] BOLT-FLANGE HEAD  
4. 287-8597 [2] DOWEL  
5. 288-6974 M [4] BOLT (M10X1.5X50-MM)  
6. 335-2092 [1] COVER-FLYWHEEL  
7. 393-4006 [1] GASKET  
8. 394-5874 [1] HOUSING-FLYWHEEL  
9. 288-6975 M [2] BOLT (M16X2X40-MM)  
  M   METRIC PART
 

Information:

Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Disassembly and Assembly
Bearing Clearance - Check
C7.1 (Mech) Engines for Caterpillar Built Machines
Crankshaft - Install
C7.1 (Mech) Engines for Caterpillar Built Machines
Crankshaft - Remove
C7.1 (Mech) Engines for Caterpillar Built Machines
Crankshaft Front Seal - Remove and Install
C7.1 (Mech) Engines for Caterpillar Built Machines
Crankshaft Gear - Remove and Install
C7.1 (Mech) Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove and Install - Crankshaft in Position
C7.1 (Mech) Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Install
C7.1 (Mech) Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Remove
C7.1 (Mech) Engines for Caterpillar Built Machines

Caterpillar Parts SIS Catalog 320D2 :

Truck sale:

 
Caterpillar 320D2
- Crawler Excavators
THE CHINA ENGINEERS, LTD
 
Caterpillar 320D2
- Crawler Excavators
PESA
On Request 
Caterpillar 320D2, Construction
- Crawler Excavators
MONARK EQUIPMENT
Philippines
139,000 USD 
Caterpillar 320D2, Construction
- Crawler Excavators
EMPRESAS MATCO, S.A. DE C.V.
Mexico
 
CATERPILLAR 320D2 2014
- TRACK EXCAVATORS
PESA