269-3410 WIRING GP-HEATER -AIR INLET MANIFOLD S/N TXD1-UP PART OF 438-5344 ENGINE AR, 391-1071, 430-4547 ENGINE AR-COMPLETE ALSO AN ATTACHMENT 336D2

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 269-3410 WIRING GP-
1. 259-4964 WIRING GP-
2. 434-0103 WIRING GP-
3. 342-3026 WIRING GP-
4. 283-2913 WIRING GP-
5. 238-1570 WIRING GP-

POWER TRAIN

DRIVE GP-FINAL

6. 353-0501 DRIVE GP-F
7. 353-0501 DRIVE GP-F
8. 353-0501 DRIVE GP-F
9. 353-0562 DRIVE GP-F
0. INFORMATION

EXCAVATOR 336D2 EXCAVATOR TLY
336D2 & 336D2 L Excavators TLY00001-UP (MACHINE) POWERED BY C9 Engine SEBP6523 336D2 TLY (2013)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

259-5062 WIRING GP-FUEL SYSTEM

251-0622 WIRING GP-HAMMER

269-3410 WIRING GP-HEATER

259-4964 WIRING GP-MEDIUM PRESSURE

434-0103 WIRING GP-PLATFORM

342-3026 WIRING GP-QUICK COUPLER

#SEBP65230360

269-3410: WIRING GP-HEATER

WIRING GP-HEATER

269-3410 WIRING GP-HEATER -AIR INLET MANIFOLD
S/N TXD1-UP
PART OF 438-5344 ENGINE AR, 391-1071, 430-4547 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT

i02374199 SEBP6523

For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[1]	STRAP-CABLE
2.	398-0940 Y	[1]	SWITCH GP-MAGNETIC (24-VOLT)(AIR INLET HEATER RELAY)
3.	224-1377	[1]	CABLE AS
4.	283-1226	[1]	BRACKET AS
5.	208-9277 M	[2]	BOLT-FLANGE HEAD (M6X1X20-MM)
6.	6V-5839	[2]	WASHER (11X21X2.5-MM THK)
7.	6V-6317 M	[1]	BOLT (M10X1.5X20-MM)
8.	6V-4248 M	[1]	BOLT (M10X1.5X25-MM)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP65230361

259-4964: WIRING GP-MEDIUM PRESSURE

WIRING GP-MEDIUM PRESSURE

259-4964 WIRING GP-MEDIUM PRESSURE
S/N WBC1-UP; XBH1-UP; TLY1-UP
PART OF 255-5822, 434-5228 CONTROL AR-AUXILIARY
AN ATTACHMENT

i02495832 SEBP6523

2594964 WIRING GP-MEDIUM PRESSURE Parts scheme

For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[6]	STRAP-CABLE
2.	7K-1181	[3]	STRAP-CABLE
3.	102-7886	[1]	SPACER (11X20X80-MM THK)
4.	204-1611	[1]	STRAP (DUAL)
5.	259-5125	[1]	HARNESS AS-CONTROL
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	243-4508	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)
6.	132-5789	[1]	CLIP (LADDER)
7.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
8.	8T-4198 M	[1]	BOLT (M10X1.5X100-MM)
	M		METRIC PART

#SEBP65230362

434-0103: WIRING GP-PLATFORM

WIRING GP-PLATFORM

434-0103 WIRING GP-PLATFORM
S/N WBC1-UP; XBH1-UP; TLY1-UP
PART OF 434-4071 OPERATOR AR
ALSO AN ATTACHMENT

i05356310 SEBP6523

For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-5169	[1]	GUARD-SWITCH
2.	3S-2093	[6]	STRAP-CABLE
3.	7G-1060	[1]	STRAP AS-GROUND
4.	7K-1181	[18]	STRAP-CABLE
5.	111-4836	[4]	CLIP
6.	111-4838	[2]	CLIP
7.	111-4839	[2]	STRAP
8.	116-0118	[14]	CLIP
9.	234-1122	[1]	COVER
10.	251-0299	[1]	HARNESS AS-SWITCH (SECONDARY SHUTDOWN)
	2L-8074	[2]	TERMINAL-RING (14-GA TO 16-GA, NO. 6 SCREW)
	9X-3401	[25]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
11.	465-1257	[1]	HARNESS AS-PLATFORM
	102-8802	[5]	KIT-RECEPTACLE (2-PIN)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[14]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[30]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[26]	STRAP-CABLE
	8T-8737	[30]	PLUG-SEAL
	102-7964	[1]	PLUG-CONNECTOR (16-PIN)
	102-7965	[16]	TERMINAL (FEMALE)
	9W-0852	[7]	PIN-CONNECTOR (14-GA TO 16-GA)
	9W-0844	[41]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	116-0255	[1]	TERMINAL-BLADE (10-GA TO 20-GA)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	121-1039	[1]	TERMINAL (MALE)
	121-1168	[2]	CONNECTOR-RECEPTACLE
	121-1173	[33]	TERMINAL (MALE)
	125-4766	[1]	PLUG-CONNECTOR (17-PIN)
	125-4841	[1]	WEDGE-PLUG LOCK (21-PIN)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(40-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(40-CM)
	9X-3402	[66]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[66]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	128-8952	[1]	WEDGE-PLUG LOCK (17-PIN)
	2L-8050	[2]	TERMINAL-RING (6-GA, 1/4-IN SCREW)
			-OR-
	2L-8058	[2]	TERMINAL-RING (8-GA, 1/4-IN SCREW)
	2L-8052	[1]	TERMINAL-RING (6-GA, 3/8-IN SCREW)
			-OR-
	2L-8060	[1]	TERMINAL-RING (8-GA, 3/8-IN SCREW)
	2L-8069	[4]	TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)
	134-3296	[1]	HOUSING-PLUG
	134-3297	[2]	SEAL
	9X-3401	[25]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[25]	PIN-CONNECTOR (14-GA TO 16-GA)
	153-2620	[1]	PLUG AS-CONNECTOR (54-PIN, BLACK)
	163-6759	[1]	SEAL
	155-2270	[12]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS,WEDGE & INTERFACE SEAL)
	197-4385	[3]	DIODE
	230-4009	[3]	PLUG AS-CONNECTOR (12-PIN)
			(EACH INCLUDES)
	264-7034	[1]	SEAL-CONNECTOR
	230-4011	[4]	PLUG AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	264-7029	[1]	SEAL-CONNECTOR
	230-5010	[3]	PLUG AS-CONNECTOR (6-PIN)
			(EACH INCLUDES)
	264-7032	[1]	SEAL-CONNECTOR
	238-2363	[10]	TERMINAL (FEMALE)
	238-2366	[6]	TERMINAL (MALE)
	239-7352	[1]	PLUG AS-CONNECTOR (6-PIN)
	264-7032	[1]	SEAL-CONNECTOR
	243-4507	[1]	RECEPTACLE AS-CONNECTOR (4-PIN)
	243-4508	[2]	RECEPTACLE AS-CONNECTOR (6-PIN)
	243-4509	[1]	RECEPTACLE AS-CONNECTOR (8-PIN)
	243-4510	[2]	RECEPTACLE AS-CONNECTOR (12-PIN)
	342-2972	[2]	CAP-CONNECTOR (2-PIN)
	342-2974	[3]	CAP-CONNECTOR (6-PIN)
12.	096-6166	[2]	WASHER-HARD (4.5X9X1-MM THK)
13.	4D-1836	[1]	SWITCH-TOGGLE (SECONDARY SHUTDOWN)
14.	7X-2621 M	[7]	BOLT (M10X1.5X12-MM)
15.	8T-0337 M	[2]	SCREW-MACHINE (M4X0.7X12-MM)
16.	8T-4121	[14]	WASHER-HARD (11X21X2.5-MM THK)
17.	8T-4137 M	[7]	BOLT (M10X1.5X20-MM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP65230363

342-3026: WIRING GP-QUICK COUPLER

WIRING GP-QUICK COUPLER

342-3026 WIRING GP-QUICK COUPLER
S/N WBC1-UP; XBH1-UP; TLY1-UP
PART OF 344-4212 CONTROL AR-COUPLER
AN ATTACHMENT

i03898789 SEBP6523

3423026 WIRING GP-QUICK COUPLER Parts scheme

For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[13]	STRAP-CABLE
2.	7K-1181	[16]	STRAP-CABLE
3.	342-3027	[1]	HARNESS AS-SOLENOID (QUICK COUPLER DISENGAGE)
	8T-8730	[1]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[1]	PLUG-SEAL
	9W-0852	[1]	PIN-CONNECTOR (14-GA TO 16-GA)
	9W-0844	[1]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	2L-8079	[1]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
	264-7029	[1]	SEAL-CONNECTOR
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
4.	450-6306	[1]	HARNESS AS-PUMP (QUICK COUPLER SOLENOID)
	9W-0852	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	230-4011	[2]	PLUG AS-CONNECTOR (2-PIN)
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
	9W-0844	[1]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)
5.	347-4734	[2]	CLIP
6.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
7.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP65230364

283-2913: WIRING GP-RADIO

WIRING GP-RADIO

283-2913 WIRING GP-RADIO
S/N XBH1-UP; TLY1-UP
CANNOT BE USED WITH @@@@@268-6821@@@@@, @@@@@231-1768@@@@@
AN ATTACHMENT

i02558511 SEBP6523

For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[11]	STRAP-CABLE
2.	4I-7889	[1]	SPACER (11X25X45-MM THK)
3.	7K-1181	[10]	STRAP-CABLE
4.	116-0118	[1]	CLIP
5.	149-5050	[4]	RELAY (24-VOLT)(SPEAKERS)
6.	170-2512 Y	[1]	SWITCH GP-TOGGLE (SPEAKER)
7.	267-7676	[1]	BRACKET AS
8.	267-7695	[1]	BRACKET AS
9.	283-2914	[1]	HARNESS AS-RADIO
	8T-8737	[9]	PLUG-SEAL
	8T-8730	[21]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9W-0844	[6]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	149-5069	[8]	TERMINAL-BLADE (14-GA TO 20-GA)
	149-5070	[12]	TERMINAL-BLADE (16-GA TO 20-GA)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)
	8T-8729	[6]	PIN-CONNECTOR (16-GA TO 18-GA)
	9W-0852	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	3S-2093	[25]	STRAP-CABLE
	149-5051	[4]	CONNECTOR-RECEPTACLE
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	230-5010	[1]	PLUG AS-CONNECTOR (6-PIN)
	264-7032	[1]	SEAL-CONNECTOR
	231-2295	[2]	PLUG AS-CONNECTOR (8-PIN)
			(EACH INCLUDES)
	264-7033	[1]	SEAL-CONNECTOR
	243-4509	[2]	RECEPTACLE AS-CONNECTOR (8-PIN)
10.	283-2984	[1]	COVER
11.	324-5770	[1]	CONVERTER-POWER (24-VOLT TO 12-VOLT)
12.	8T-4171 M	[4]	BOLT (M6X1X12-MM)
13.	8T-5005 M	[1]	BOLT (M10X1.5X70-MM)
14.	9X-2042 M	[7]	SCREW-TRUSS HEAD (M6X1X12-MM)
15.	9X-8256	[4]	WASHER (6.6X12X2-MM THK)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP65230365

238-1570: WIRING GP-REFUELING PUMP

WIRING GP-REFUELING PUMP

238-1570 WIRING GP-REFUELING PUMP
S/N WBC1-UP; XBH1-UP; TLY1-UP
PART OF 416-6930, 456-1065 PUMP AR-FUEL TRANSFER
AN ATTACHMENT

i03087780 SEBP6523

2381570 WIRING GP-REFUELING PUMP Parts scheme

For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[16]	STRAP-CABLE
2.	9X-3495	[1]	CLIP AS
3.	149-5050	[1]	RELAY (24-VOLT)(REFUELING PUMP, STOP)
3A.	149-5050	[1]	RELAY (24-VOLT)(REFUELING PUMP, START)
4.	213-0772	[1]	SWITCH AS-MAGNETIC (24-VOLT)(REFUELING PUMP RELAY)
5.	238-1579	[1]	HARNESS AS-PUMP (REFUELING)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[5]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[3]	STRAP-CABLE
	8T-8737	[1]	PLUG-SEAL
	116-0126	[1]	HOUSING-PLUG
	116-0128	[2]	SEAL
	116-0255	[2]	TERMINAL-BLADE (10-GA TO 20-GA)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	121-1038	[1]	HOUSING-RECEPTACLE
	121-1039	[2]	TERMINAL (MALE)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)
	2L-8065	[1]	TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)
	2L-8067	[2]	TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)
	2L-8075	[1]	TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)
	2L-8077	[1]	TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)
	149-5051	[2]	CONNECTOR-RECEPTACLE
	149-5069	[4]	TERMINAL-BLADE (14-GA TO 20-GA)
	149-5070	[4]	TERMINAL-BLADE (16-GA TO 20-GA)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	197-4385	[1]	DIODE
	230-4011	[2]	PLUG AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	264-7029	[1]	SEAL-CONNECTOR
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
6.	319-1335 C	[1]	HARNESS AS-WIRING
	8T-8730	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[1]	PLUG-SEAL
	2L-8079	[1]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	230-4011	[2]	PLUG AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	264-7029	[1]	SEAL-CONNECTOR
7.	238-1594 Y	[1]	SWITCH GP-PUSH BUTTON (REFUELING PUMP, START)
8.	238-1596 Y	[1]	SWITCH GP-PUSH BUTTON (REFUELING PUMP, STOP)
9.	096-2591 M	[2]	SCREW-MACHINE (M5X0.8X35-MM)
10.	7X-2619 M	[2]	BOLT (M6X1X10-MM)
11.	8T-0328 C	[2]	WASHER-HARD (5.5X10X1-MM THK)
12.	8T-4199 M	[1]	BOLT (M8X1.25X12-MM)
13.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
14.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
15.	275-6993	[1]	COVER
16.	7K-1181 C	[11]	STRAP-CABLE
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP65230366

353-0501: DRIVE GP-FINAL

DRIVE GP-FINAL

353-0501 DRIVE GP-FINAL -WITH MOTOR, SPROCKET
S/N WBC1-UP; XBH224-303; TLY196-334
PART OF 191-2576 POWER TRAIN AR
ALSO AN ATTACHMENT

i05708755 SEBP6523

For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	168-6727 Y	[1]	SPROCKET GP (NON-SEGMENTED)(NON-SEGMENTED)
2.	453-7463 CY	[1]	DRIVE GP-FINAL (WITH MOTOR)
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#SEBP65230367

353-0501: DRIVE GP-FINAL

DRIVE GP-FINAL

353-0501 DRIVE GP-FINAL -WITH MOTOR, SPROCKET
S/N WBC1-UP; XBH1-223; TLY1-195
PART OF 191-2576 POWER TRAIN AR

i03997113 SEBP6523

For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	168-6727 Y	[1]	SPROCKET GP (NON-SEGMENTED)(NON-SEGMENTED)
2.	353-0585 Y	[1]	DRIVE GP-FINAL (WITH MOTOR)
	Y		SEPARATE ILLUSTRATION

#SEBP65230368

353-0501: DRIVE GP-FINAL

DRIVE GP-FINAL

353-0501 DRIVE GP-FINAL -WITH MOTOR, SPROCKET
S/N WBC1-UP; XBH304-UP; TLY335-UP
PART OF 191-2576 POWER TRAIN AR
ALSO AN ATTACHMENT

i06609416 SEBP6523

For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	168-6727 Y	[1]	SPROCKET GP (NON-SEGMENTED)
2.	470-8770 CY	[1]	DRIVE GP-FINAL (WITH MOTOR)
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#SEBP65230369

353-0562: DRIVE GP-FINAL

DRIVE GP-FINAL

353-0562 DRIVE GP-FINAL -WITHOUT MOTOR
S/N WBC1-UP; XBH1-223; TLY1-996
PART OF 353-0585 DRIVE GP-FINAL

i03997126 SEBP6523

For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7Y-0595	[2]	SPACER (58X79.6X6-MM THK)
2.	7Y-1056 B	[1]	SHIM (0.8-MM THK)
	7Y-1057 B	[1]	SHIM (1-MM THK)
	267-6809 B	[1]	SHIM (0.75-MM THK)
	267-6810 B	[1]	SHIM (0.85-MM THK)
	267-6811 B	[1]	SHIM (0.9-MM THK)
	267-6812 B	[1]	SHIM (0.95-MM THK)
	267-6813 B	[1]	SHIM (1.2-MM THK)
	267-6814 B	[1]	SHIM (1.4-MM THK)
	267-6815 B	[1]	SHIM (1.8-MM THK)
	267-6816 B	[1]	SHIM (2-MM THK)
	267-6817 B	[1]	SHIM (2.3-MM THK)
4.	094-0577 B	[1]	PLATE (7-MM THK)
	094-0578 B	[1]	PLATE (8-MM THK)
	094-0579 B	[1]	PLATE (9-MM THK)
	094-0580 B	[1]	PLATE (10-MM THK)
8.	114-1541	[6]	PIN-DOWEL
9.	136-2898	[14]	WASHER (58.3X89X1-MM THK)
10.	191-2690	[6]	WASHER (42.3X70X1-MM THK)
11.	227-6192	[1]	GEAR-COUPLING
12.	255-2272	[1]	SEAL GP-DUO-CONE
22.	279-0344	[2]	BEARING AS-TAPERED ROLLER
23.	295-9234	[1]	SEAL-O-RING
24.	296-6181	[1]	HOUSING (SPROCKET)
25.	296-6182	[1]	COVER
26.	296-6183	[1]	CARRIER-PLANETARY
27.	296-6184	[4]	GEAR-PLANETARY (21-TEETH)
28.	296-6185	[4]	SHAFT
29.	296-6186	[3]	GEAR-PLANETARY (21-TEETH)
30.	296-6189	[1]	GEAR-SUN (20-TEETH)
31.	296-6190	[1]	GEAR-SUN (20-TEETH)
32.	296-6192	[1]	SPACER (143X170X8-MM THK)
33.	296-6194	[1]	CARRIER-PLANETARY
34.	296-6195	[3]	SHAFT
35.	296-6230	[3]	GEAR-PLANETARY (21-TEETH)
36.	296-6231	[1]	GEAR-SUN (20-TEETH)
37.	296-6232	[1]	CARRIER AS (PLANETARY)
38.	296-6247	[11]	BEARING AS-ROLLER
39.	296-6248	[3]	BEARING AS-ROLLER
40.	296-6311	[1]	GEAR-RING (64-TEETH)
41.	353-0563	[1]	HOUSING-MOTOR
42.	093-1731	[2]	RING-RETAINING (EXTERNAL)
43.	095-0891	[7]	PIN-SPRING
44.	096-3216 M	[2]	SETSCREW-SOCKET (M12X1.75X12-MM)
45.	096-8058	[3]	RING-RETAINING
46.	191-2645	[1]	COUPLING
47.	3E-2338	[2]	PLUG-PIPE
48.	6V-8133 M	[10]	BOLT (M24X3X80-MM)
49.	6V-8237	[10]	WASHER (26X44X4-MM THK)
50.	7M-8485	[2]	SEAL-O-RING
51.	7Y-5217 M	[30]	BOLT-SOCKET HEAD (M20X2.5X70-MM)
52.	8T-4123	[30]	WASHER (22X35X3.5-MM THK)
53.	8T-4223	[16]	WASHER-HARD (13.5X25.5X3-MM THK)
54.	8T-4956 M	[16]	BOLT (M12X1.75X35-MM)

	1U-8846 BF		SEALANT-GASKET
	B		USE AS REQUIRED
	F		NOT SHOWN
	M		METRIC PART

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

New Control Harness Assembly is Now Used on Certain Cat® Engines {1408, 1900}
New Control Harness Assembly is Now Used on Certain Cat^® Engines {1408, 1900}

Operation and Maintenance Manual

Battery - Recycle
336D2 and 340D2 Excavators

Battery Disconnect Switch
336D2 and 340D2 Excavators

Battery or Battery Cable - Inspect/Replace
336D2 and 340D2 Excavators

Power Receptacle - If Equipped
336D2 and 340D2 Excavators

Fuses - Replace
336D2 and 340D2 Excavators

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Installation Procedure for 251-0529 Cab Wiring Gp on Certain Hydraulic Excavators {1408}
Installation Procedure for 251-0529 Cab Wiring Gp on Certain Hydraulic Excavators {1408}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}

Installation Procedure for the 417-4689 Hydraulic Lines Kit on Certain Hydraulic Excavators{1408, 5057, 5479}
Installation Procedure for the 417-4689 Hydraulic Lines Kit on Certain Hydraulic Excavators{1408, 5057, 5479}

Installation Procedure for the 259-4962 Chassis Wiring Gp for Certain Hydraulic Excavators{1408}
Installation Procedure for the 259-4962 Chassis Wiring Gp for Certain Hydraulic Excavators{1408}

Installation of the 452-2030 Hammer Filter Ar on Certain Hydraulic Excavators{1408, 5057, 7405}
Installation of the 452-2030 Hammer Filter Ar on Certain Hydraulic Excavators{1408, 5057, 7405}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Installation of the 466-9015 Auxiliary Control Ar on Certain Hydraulic Excavators {1408, 5051, 5057, 5059, 5063, 7301, 7405, 7557}
Installation of the 466-9015 Auxiliary Control Ar on Certain Hydraulic Excavators {1408, 5051, 5057, 5059, 5063, 7301, 7405, 7557}

Installation Procedure for the 443-7107 Control Ar - Auxiliary {1408, 5051, 5057, 5059, 5063, 7405, 7557}
Installation Procedure for the 443-7107 Control Ar - Auxiliary {1408, 5051, 5057, 5059, 5063, 7405, 7557}

Installation Procedure for 465-6187 Cab Wiring Gp for Certain Hydraulic Excavators{1408, 7332}
Installation Procedure for 465-6187 Cab Wiring Gp for Certain Hydraulic Excavators{1408, 7332}

Installation of the 472-0686 Quick Coupler Control Ar on Certain Hydraulic Excavators {1408, 1435, 5057, 7301, 7405, 7557}
Installation of the 472-0686 Quick Coupler Control Ar on Certain Hydraulic Excavators {1408, 1435, 5057, 7301, 7405, 7557}

Installation Procedure for 465-1253 Chassis Wiring Gp for Certain Hydraulic Excavators{1408}
Installation Procedure for 465-1253 Chassis Wiring Gp for Certain Hydraulic Excavators{1408}

Specifications

Wiring (Air Inlet Heater)
C9 Engines for Caterpillar Built Machines

Radio (AM/FM)
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications

Tool Operating Manual

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Systems Operation

Relays
320D, 320D2, 321D, 323D, 324D, 325D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators Tool Control System

Senders
320D, 320D2, 321D, 323D, 324D, 325D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators Tool Control System

Sensors
320D, 320D2, 321D, 323D, 324D, 325D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators Tool Control System

Switches
320D, 320D2, 321D, 323D, 324D, 325D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators Tool Control System

Switches
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Sensors
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Cat Machines

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Testing and Adjusting

Electric Starting System - Test
C9 Engines for Caterpillar Built Machines

Electrical Connector - Inspect
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Wiring Harness (Open Circuit) - Test
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Wiring Harness (Short Circuit) - Test
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

System Schematic
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Overload Warning - Set - If Equipped
336D2 and 340D2 Excavators Hydraulic System

System Schematic
Machine Security System (MSS3i) Integrated

Troubleshooting

Electrical Connectors - Inspect
C7 and C9 Engines for Caterpillar Built Machines

CID 0100 FMI 04 Engine Oil Pressure short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0174 FMI 04 Fuel Temperature short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0274 FMI 04 Atmospheric Pressure short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

CID 0110 FMI 04 Engine Coolant Temperature short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0164 FMI 03 Injector Actuation Pressure voltage high
C7 and C9 Engines for Caterpillar Built Machines

CID 0091 FMI 08 Throttle Position signal abnormal
C7 and C9 Engines for Caterpillar Built Machines

CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
C7 and C9 Engines for Caterpillar Built Machines

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

CID 0164 FMI 04 Injector Actuation Pressure voltage low
C7 and C9 Engines for Caterpillar Built Machines

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

Fuel Filter Differential Pressure Switch Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Engine Wiring Information
C7 and C9 Engines for Caterpillar Built Machines

CID 2417 FMI 05 Ether Injection Control Solenoid current low
C7 and C9 Engines for Caterpillar Built Machines

CID 2417 FMI 06 Ether Injection Control Solenoid current high
C7 and C9 Engines for Caterpillar Built Machines

Digital Sensor Supply Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C7 and C9 Engines for Caterpillar Built Machines

CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high
C7 and C9 Engines for Caterpillar Built Machines

CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
C7 and C9 Engines for Caterpillar Built Machines

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C7 and C9 Engines for Caterpillar Built Machines

CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
C7 and C9 Engines for Caterpillar Built Machines

Air Inlet Heater Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

MID 039 - CID 0096 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0096 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0586 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0586 - FMI 12
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0588 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 08
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2280 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

CID 0174 FMI 03 Fuel Temperature open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

Sensors and Electrical Connectors
C7 and C9 Engines for Caterpillar Built Machines

Throttle Switch Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Low Engine Oil Pressure Lamp Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Electrical Component and Connector Locations
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0110 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0110 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2300 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0600 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

CID 0190 FMI 08 Engine Speed signal abnormal
C7 and C9 Engines for Caterpillar Built Machines

CID 1785 FMI 10 Intake Manifold Pressure Signal abnormal rate of change
C7 and C9 Engines for Caterpillar Built Machines

Service Magazine

Parts are Now Available to Make Jump Start Receptacle on Cat® Product {1463}
2014/03/04

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

New Control Harness Assembly Is Now Used on Certain Cat® Engines {1408}
New Control Harness Assembly Is Now Used on Certain Cat^® Engines {1408}