350-8234 WIRING GP-QUICK COUPLER S/N ELR1-UP; FAR1-UP; EFT1-UP PART OF 344-4457 CONTROL AR-COUPLER AN ATTACHMENT 336D2

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 350-8234 WIRING GP-
1. 336-6141 WIRING GP-
2. 238-1570 WIRING GP-
3. 452-5723 WIRING GP-

POWER TRAIN

DRIVE GP-FINAL

4. 353-0501 DRIVE GP-F
5. 353-0501 DRIVE GP-F
6. 353-0501 DRIVE GP-F
7. 353-0562 DRIVE GP-F
8. 353-0585 DRIVE GP-F
9. 453-7461 DRIVE GP-F
0. INFORMATION

EXCAVATOR 336D2 EXCAVATOR EFT
336D2 & 336D2 L Excavators EFT00001-UP (MACHINE) POWERED BY C9 Engine SEBP6524 336D2 EFT (2013)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

259-4964 WIRING GP-MEDIUM PRESSURE

434-0105 WIRING GP-PLATFORM

350-8234 WIRING GP-QUICK COUPLER

336-6141 WIRING GP-RADIO

238-1570 WIRING GP-REFUELING PUMP

452-5723 WIRING GP-REFUELING PUMP

#SEBP65240300

350-8234: WIRING GP-QUICK COUPLER

WIRING GP-QUICK COUPLER

350-8234 WIRING GP-QUICK COUPLER
S/N ELR1-UP; FAR1-UP; EFT1-UP
PART OF 344-4457 CONTROL AR-COUPLER
AN ATTACHMENT

i04552541 SEBP6524

3508234 WIRING GP-QUICK COUPLER Parts scheme

For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[13]	STRAP-CABLE
2.	7K-1181	[16]	STRAP-CABLE
3.	350-8235	[1]	HARNESS AS-WIRING
	8T-8730	[1]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[1]	PLUG-SEAL
	9W-0852	[1]	PIN-CONNECTOR (14-GA TO 16-GA)
	9W-0844	[1]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	2L-8079	[1]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
	264-7029	[1]	SEAL-CONNECTOR
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
4.	450-6306	[1]	HARNESS AS-PUMP
	9W-0852	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	9W-0844	[4]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)
	230-4011	[2]	PLUG AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	455-0704	[1]	SEAL-CONNECTOR
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
5.	347-4734	[2]	CLIP
6.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
7.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP65240301

336-6141: WIRING GP-RADIO

WIRING GP-RADIO

336-6141 WIRING GP-RADIO
S/N FAR1-UP; EFT1-UP
12-VOLT
AN ATTACHMENT

i03645896 SEBP6524

For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[10]	STRAP-CABLE
2.	4I-7889	[1]	SPACER (11X25X45-MM THK)
3.	7K-1181	[10]	STRAP-CABLE
4.	116-0118	[1]	CLIP
5.	149-5050	[1]	RELAY (24-VOLT)(SPEAKERS RH POSITIVE)
5A.	149-5050	[1]	RELAY (24-VOLT)(SPEAKERS RH NEGATIVE)
5B.	149-5050	[1]	RELAY (24-VOLT)(SPEAKERS LH POSITIVE)
5C.	149-5050	[1]	RELAY (24-VOLT)(SPEAKERS LH NEGATIVE)
6.	170-2512 Y	[1]	SWITCH GP-TOGGLE (SPEAKER)
7.	267-7676	[1]	BRACKET AS
8.	267-7695	[1]	BRACKET AS
9.	283-2984	[1]	COVER
10.	342-2962	[1]	HARNESS AS-RADIO
	8T-8729	[6]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[21]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[26]	STRAP-CABLE
	8T-8737	[9]	PLUG-SEAL
	9W-0852	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	9W-0844	[6]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)
	149-5051	[4]	CONNECTOR-RECEPTACLE
	149-5069	[8]	TERMINAL-BLADE (14-GA TO 20-GA)
	149-5070	[12]	TERMINAL-BLADE (16-GA TO 20-GA)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	230-5010	[1]	PLUG AS-CONNECTOR (6-PIN)
	264-7032	[1]	SEAL-CONNECTOR
	231-2295	[2]	PLUG AS-CONNECTOR (8-PIN)
			(EACH INCLUDES)
	264-7033	[1]	SEAL-CONNECTOR
	243-4509	[2]	RECEPTACLE AS-CONNECTOR (8-PIN)
11.	324-5770	[1]	CONVERTER-POWER (24-VOLT TO 12-VOLT)
12.	8T-4171 M	[4]	BOLT (M6X1X12-MM)
13.	8T-5005 M	[1]	BOLT (M10X1.5X70-MM)
14.	9X-2042 M	[7]	SCREW-TRUSS HEAD (M6X1X12-MM)
15.	9X-8256	[4]	WASHER (6.6X12X2-MM THK)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP65240302

238-1570: WIRING GP-REFUELING PUMP

WIRING GP-REFUELING PUMP

238-1570 WIRING GP-REFUELING PUMP
S/N FAR1-UP; EFT1-UP
PART OF 416-6930, 456-1065 PUMP AR-FUEL TRANSFER
AN ATTACHMENT

i03087780 SEBP6524

2381570 WIRING GP-REFUELING PUMP Parts scheme

For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[16]	STRAP-CABLE
2.	9X-3495	[1]	CLIP AS
3.	149-5050	[1]	RELAY (24-VOLT)(REFUELING PUMP, STOP)
3A.	149-5050	[1]	RELAY (24-VOLT)(REFUELING PUMP, START)
4.	213-0772	[1]	SWITCH AS-MAGNETIC (24-VOLT)(REFUELING PUMP RELAY)
5.	238-1579	[1]	HARNESS AS-PUMP (REFUELING)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[5]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[3]	STRAP-CABLE
	8T-8737	[1]	PLUG-SEAL
	116-0126	[1]	HOUSING-PLUG
	116-0128	[2]	SEAL
	116-0255	[2]	TERMINAL-BLADE (10-GA TO 20-GA)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	121-1038	[1]	HOUSING-RECEPTACLE
	121-1039	[2]	TERMINAL (MALE)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)
	2L-8065	[1]	TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)
	2L-8067	[2]	TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)
	2L-8075	[1]	TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)
	2L-8077	[1]	TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)
	149-5051	[2]	CONNECTOR-RECEPTACLE
	149-5069	[4]	TERMINAL-BLADE (14-GA TO 20-GA)
	149-5070	[4]	TERMINAL-BLADE (16-GA TO 20-GA)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	197-4385	[1]	DIODE
	230-4011	[2]	PLUG AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	264-7029	[1]	SEAL-CONNECTOR
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
6.	319-1335 C	[1]	HARNESS AS-WIRING
	8T-8730	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[1]	PLUG-SEAL
	2L-8079	[1]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	230-4011	[2]	PLUG AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	264-7029	[1]	SEAL-CONNECTOR
7.	238-1594 Y	[1]	SWITCH GP-PUSH BUTTON (REFUELING PUMP, START)
8.	238-1596 Y	[1]	SWITCH GP-PUSH BUTTON (REFUELING PUMP, STOP)
9.	096-2591 M	[2]	SCREW-MACHINE (M5X0.8X35-MM)
10.	7X-2619 M	[2]	BOLT (M6X1X10-MM)
11.	8T-0328 C	[2]	WASHER-HARD (5.5X10X1-MM THK)
12.	8T-4199 M	[1]	BOLT (M8X1.25X12-MM)
13.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
14.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
15.	275-6993	[1]	COVER
16.	7K-1181 C	[11]	STRAP-CABLE
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP65240303

452-5723: WIRING GP-REFUELING PUMP

WIRING GP-REFUELING PUMP

452-5723 WIRING GP-REFUELING PUMP -FUEL TRANSFER
S/N ELR1-UP
PART OF 447-3353, 456-1066 PUMP AR-FUEL TRANSFER
AN ATTACHMENT

i05697552 SEBP6524

4525723 WIRING GP-REFUELING PUMP Parts scheme

For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[17]	STRAP-CABLE
2.	7K-1181	[7]	STRAP-CABLE
3.	9X-3495	[1]	CLIP AS
4.	149-5050	[1]	RELAY (24-VOLT)(REFUELING PUMP, STOP)
4A.	149-5050	[1]	RELAY (24-VOLT)(REFUELING PUMP, START)
5.	213-0772	[1]	SWITCH AS-MAGNETIC (24-VOLT)(REFUELING PUMP RELAY)
6.	238-1579	[1]	HARNESS AS-PUMP (REFUELING)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[5]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[3]	STRAP-CABLE
	8T-8737	[1]	PLUG-SEAL
	116-0126	[1]	HOUSING-PLUG
	116-0128	[2]	SEAL
	116-0255	[2]	TERMINAL-BLADE (10-GA TO 20-GA)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	121-1038	[1]	HOUSING-RECEPTACLE
	121-1039	[2]	TERMINAL (MALE)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)
	2L-8065	[1]	TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)
	2L-8067	[2]	TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)
	2L-8075	[1]	TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)
	2L-8077	[1]	TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)
	149-5051	[2]	CONNECTOR-RECEPTACLE
	149-5069	[4]	TERMINAL-BLADE (14-GA TO 20-GA)
	149-5070	[4]	TERMINAL-BLADE (16-GA TO 20-GA)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	197-4385	[1]	DIODE
	230-4011	[2]	PLUG AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	264-7029	[1]	SEAL-CONNECTOR
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
7.	238-1594 Y	[1]	SWITCH GP-PUSH BUTTON (REFUELING PUMP, START)
8.	238-1596 Y	[1]	SWITCH GP-PUSH BUTTON (REFUELING PUMP, STOP)
9.	275-6993	[1]	COVER
10.	452-5724	[1]	HARNESS AS-WIRING (REFUELING PUMP RELAY)
	8T-8730	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[1]	PLUG-SEAL
	2L-8079	[1]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	230-4011	[2]	PLUG AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	455-0704	[1]	SEAL-CONNECTOR
11.	096-2591 M	[2]	SCREW-MACHINE (M5X0.8X35-MM)
12.	7X-2619 M	[2]	BOLT (M6X1X10-MM)
13.	8T-0328	[2]	WASHER-HARD (5.5X10X1-MM THK)
14.	8T-4199 M	[1]	BOLT (M8X1.25X12-MM)
15.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
16.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP65240304

353-0501: DRIVE GP-FINAL

DRIVE GP-FINAL

353-0501 DRIVE GP-FINAL -WITH MOTOR, SPROCKET
S/N FAR1-232; EFT1-187
PART OF 191-2576 POWER TRAIN AR

i03997113 SEBP6524

For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	168-6727 Y	[1]	SPROCKET GP (NON-SEGMENTED)(NON-SEGMENTED)
2.	353-0585 Y	[1]	DRIVE GP-FINAL (WITH MOTOR)
	Y		SEPARATE ILLUSTRATION

#SEBP65240305

353-0501: DRIVE GP-FINAL

DRIVE GP-FINAL

353-0501 DRIVE GP-FINAL -WITH MOTOR, SPROCKET
S/N ELR161-UP; FAR233-308; EFT188-UP
PART OF 191-2576 POWER TRAIN AR
ALSO AN ATTACHMENT

i05708755 SEBP6524

For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	168-6727 Y	[1]	SPROCKET GP (NON-SEGMENTED)(NON-SEGMENTED)
2.	453-7463 CY	[1]	DRIVE GP-FINAL (WITH MOTOR)
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#SEBP65240306

353-0501: DRIVE GP-FINAL

DRIVE GP-FINAL

353-0501 DRIVE GP-FINAL -WITH MOTOR, SPROCKET
S/N ELR161-UP; FAR309-UP; EFT188-UP
PART OF 191-2576 POWER TRAIN AR
ALSO AN ATTACHMENT

i06609416 SEBP6524

For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	168-6727 Y	[1]	SPROCKET GP (NON-SEGMENTED)
2.	470-8770 CY	[1]	DRIVE GP-FINAL (WITH MOTOR)
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#SEBP65240307

353-0562: DRIVE GP-FINAL

DRIVE GP-FINAL

353-0562 DRIVE GP-FINAL -WITHOUT MOTOR
S/N FAR1-232; EFT1-187
PART OF 353-0585 DRIVE GP-FINAL

i03997126 SEBP6524

For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7Y-0595	[2]	SPACER (58X79.6X6-MM THK)
2.	7Y-1056 B	[1]	SHIM (0.8-MM THK)
	7Y-1057 B	[1]	SHIM (1-MM THK)
	267-6809 B	[1]	SHIM (0.75-MM THK)
	267-6810 B	[1]	SHIM (0.85-MM THK)
	267-6811 B	[1]	SHIM (0.9-MM THK)
	267-6812 B	[1]	SHIM (0.95-MM THK)
	267-6813 B	[1]	SHIM (1.2-MM THK)
	267-6814 B	[1]	SHIM (1.4-MM THK)
	267-6815 B	[1]	SHIM (1.8-MM THK)
	267-6816 B	[1]	SHIM (2-MM THK)
	267-6817 B	[1]	SHIM (2.3-MM THK)
4.	094-0577 B	[1]	PLATE (7-MM THK)
	094-0578 B	[1]	PLATE (8-MM THK)
	094-0579 B	[1]	PLATE (9-MM THK)
	094-0580 B	[1]	PLATE (10-MM THK)
8.	114-1541	[6]	PIN-DOWEL
9.	136-2898	[14]	WASHER (58.3X89X1-MM THK)
10.	191-2690	[6]	WASHER (42.3X70X1-MM THK)
11.	227-6192	[1]	GEAR-COUPLING
12.	255-2272	[1]	SEAL GP-DUO-CONE
22.	279-0344	[2]	BEARING AS-TAPERED ROLLER
23.	295-9234	[1]	SEAL-O-RING
24.	296-6181	[1]	HOUSING (SPROCKET)
25.	296-6182	[1]	COVER
26.	296-6183	[1]	CARRIER-PLANETARY
27.	296-6184	[4]	GEAR-PLANETARY (21-TEETH)
28.	296-6185	[4]	SHAFT
29.	296-6186	[3]	GEAR-PLANETARY (21-TEETH)
30.	296-6189	[1]	GEAR-SUN (20-TEETH)
31.	296-6190	[1]	GEAR-SUN (20-TEETH)
32.	296-6192	[1]	SPACER (143X170X8-MM THK)
33.	296-6194	[1]	CARRIER-PLANETARY
34.	296-6195	[3]	SHAFT
35.	296-6230	[3]	GEAR-PLANETARY (21-TEETH)
36.	296-6231	[1]	GEAR-SUN (20-TEETH)
37.	296-6232	[1]	CARRIER AS (PLANETARY)
38.	296-6247	[11]	BEARING AS-ROLLER
39.	296-6248	[3]	BEARING AS-ROLLER
40.	296-6311	[1]	GEAR-RING (64-TEETH)
41.	353-0563	[1]	HOUSING-MOTOR
42.	093-1731	[2]	RING-RETAINING (EXTERNAL)
43.	095-0891	[7]	PIN-SPRING
44.	096-3216 M	[2]	SETSCREW-SOCKET (M12X1.75X12-MM)
45.	096-8058	[3]	RING-RETAINING
46.	191-2645	[1]	COUPLING
47.	3E-2338	[2]	PLUG-PIPE
48.	6V-8133 M	[10]	BOLT (M24X3X80-MM)
49.	6V-8237	[10]	WASHER (26X44X4-MM THK)
50.	7M-8485	[2]	SEAL-O-RING
51.	7Y-5217 M	[30]	BOLT-SOCKET HEAD (M20X2.5X70-MM)
52.	8T-4123	[30]	WASHER (3.62X5.75X0.375-MM THK)
53.	8T-4223	[16]	WASHER-HARD (13.5X25.5X3-MM THK)
54.	8T-4956 M	[16]	BOLT (M12X1.75X35-MM)

	1U-8846 BF		SEALANT-GASKET
	B		USE AS REQUIRED
	F		NOT SHOWN
	M		METRIC PART

#SEBP65240308

353-0585: DRIVE GP-FINAL

DRIVE GP-FINAL

353-0585 DRIVE GP-FINAL -WITH MOTOR
S/N FAR1-232; EFT1-187
PART OF 353-0501 DRIVE GP-FINAL

i03997119 SEBP6524

For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	322-8729 Y	[1]	MOTOR & MTG GP-TRAVEL
2.	353-0562 Y	[1]	DRIVE GP-FINAL (WITHOUT MOTOR)
	Y		SEPARATE ILLUSTRATION

#SEBP65240309

453-7461: DRIVE GP-FINAL

DRIVE GP-FINAL

453-7461 DRIVE GP-FINAL -WITHOUT MOTOR
S/N ELR161-UP; FAR233-UP; EFT188-UP
PART OF 453-7463 DRIVE GP-FINAL
FIELD REPLACEMENT ORDER @@@@@470-8769@@@@@
ALSO AN ATTACHMENT

i05708989 SEBP6524

For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	094-0577	[1]	PLATE (7-MM THK)
2.	094-0578	[1]	PLATE (8-MM THK)
3.	094-0579	[1]	PLATE (9-MM THK)
4.	094-0580	[1]	PLATE (10-MM THK)
5.	136-2898	[14]	WASHER (58.3X89X1-MM THK)
6.	191-2645	[1]	COUPLING
7.	191-2690	[6]	WASHER (42.3X70X1-MM THK)
8.	227-6192	[1]	GEAR-COUPLING
9.	295-9234	[1]	SEAL-O-RING
10.	296-6181	[1]	HOUSING
11.	296-6182	[1]	COVER
12.	296-6183	[1]	CARRIER-PLANETARY
13.	296-6184	[4]	GEAR-PLANETARY (21-TEETH)
14.	296-6185	[4]	SHAFT
15.	296-6186	[3]	GEAR-PLANETARY (21-TEETH)
16.	296-6189	[1]	GEAR-SUN (20-TEETH)
17.	296-6190	[1]	GEAR-SUN (20-TEETH)
18.	296-6192	[1]	SPACER (143X170X8-MM THK)
19.	296-6194	[1]	CARRIER-PLANETARY
20.	296-6195	[3]	SHAFT
21.	296-6230	[3]	GEAR-PLANETARY (21-TEETH)
22.	296-6231	[1]	GEAR-SUN (20-TEETH)
23.	296-6232	[1]	CARRIER AS
24.	296-6311	[1]	GEAR-RING (64-TEETH)
25.	353-0563	[1]	HOUSING-MOTOR
26.	093-1731	[2]	RING-RETAINING
27.	095-0891	[7]	PIN-SPRING
28.	096-3216 M	[2]	SETSCREW-SOCKET (M12X1.75X12-MM)
29.	096-8058	[3]	RING-RETAINING
30.	114-1541	[6]	PIN-DOWEL
31.	143-0811 M	[16]	BOLT (12X1.75X35-MM)
32.	255-2272	[1]	SEAL GP-DUO-CONE
33.	267-6809	[1]	SHIM (0.75-MM THK)
34.	267-6810	[1]	SHIM (0.85-MM THK)
35.	267-6811	[1]	SHIM (0.9-MM THK)
36.	267-6812	[1]	SHIM (0.95-MM THK)
37.	267-6813	[1]	SHIM (1.2-MM THK)
38.	267-6814	[1]	SHIM (1.4-MM THK)
39.	267-6815	[1]	SHIM (1.8-MM THK)
40.	267-6816	[1]	SHIM (2-MM THK)
41.	267-6817	[1]	SHIM (2.3-MM THK)
42.	279-0344	[2]	BEARING AS-TAPERED ROLLER
43.	296-6247	[11]	BEARING AS-ROLLER
44.	296-6248	[3]	BEARING AS-ROLLER
45.	3E-2338	[2]	PLUG-PIPE
46.	5P-8245	[16]	WASHER-HARD (13.5X25.5X3-MM THK)
47.	6V-8133 M	[10]	BOLT (M24X3X80-MM)
48.	6V-8237	[10]	WASHER (26X44X4-MM THK)
49.	7M-8485	[2]	SEAL-O-RING
50.	7Y-0595	[2]	SPACER (58X79.6X6-MM THK)
51.	7Y-1056	[1]	SHIM (0.8-MM THK)
52.	7Y-1057	[1]	SHIM (1-MM THK)
53.	7Y-5217 M	[30]	BOLT-SOCKET HEAD (M20X2.5X70-MM)
54.	451-2176	[30]	WASHER-HARD (22X35X3.5-MM THK)

	1U-8846 BF		SEALANT-GASKET
	B		USE AS REQUIRED
	F		NOT SHOWN
	M		METRIC PART

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Operation and Maintenance Manual

Battery - Recycle
336D2 and 340D2 Excavators

Battery Disconnect Switch
336D2 and 340D2 Excavators

Battery or Battery Cable - Inspect/Replace
336D2 and 340D2 Excavators

Power Receptacle - If Equipped
336D2 and 340D2 Excavators

Fuses - Replace
336D2 and 340D2 Excavators

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}

Installation Procedure for the 417-4689 Hydraulic Lines Kit on Certain Hydraulic Excavators{1408, 5057, 5479}
Installation Procedure for the 417-4689 Hydraulic Lines Kit on Certain Hydraulic Excavators{1408, 5057, 5479}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Installation of the 472-0687 Quick Coupler Control Ar on Certain Hydraulic Excavators {1408, 5057, 6129}
Installation of the 472-0687 Quick Coupler Control Ar on Certain Hydraulic Excavators {1408, 5057, 6129}

Installation Procedure for 465-6187 Cab Wiring Gp for Certain Hydraulic Excavators{1408, 7332}
Installation Procedure for 465-6187 Cab Wiring Gp for Certain Hydraulic Excavators{1408, 7332}

Installation Procedure for 466-2825 Chassis Wiring Gp for Certain Hydraulic Excavators{1408}
Installation Procedure for 466-2825 Chassis Wiring Gp for Certain Hydraulic Excavators{1408}

Specifications

Wiring (Air Inlet Heater)
C9 Engines for Caterpillar Built Machines

Radio (AM/FM)
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications

Tool Operating Manual

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Systems Operation

Relays
320D, 320D2, 321D, 323D, 324D, 325D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators Tool Control System

Senders
320D, 320D2, 321D, 323D, 324D, 325D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators Tool Control System

Sensors
320D, 320D2, 321D, 323D, 324D, 325D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators Tool Control System

Switches
320D, 320D2, 321D, 323D, 324D, 325D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators Tool Control System

Switches
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Sensors
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Cat Machines

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Testing and Adjusting

Electric Starting System - Test
C9 Engines for Caterpillar Built Machines

Electrical Connector - Inspect
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Wiring Harness (Open Circuit) - Test
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Wiring Harness (Short Circuit) - Test
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

System Schematic
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Overload Warning - Set - If Equipped
336D2 and 340D2 Excavators Hydraulic System

System Schematic
Machine Security System (MSS3i) Integrated

Troubleshooting

Electrical Connectors - Inspect
C7 and C9 Engines for Caterpillar Built Machines

CID 0100 FMI 04 Engine Oil Pressure short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0174 FMI 04 Fuel Temperature short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0274 FMI 04 Atmospheric Pressure short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

CID 0110 FMI 04 Engine Coolant Temperature short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0164 FMI 03 Injector Actuation Pressure voltage high
C7 and C9 Engines for Caterpillar Built Machines

CID 0091 FMI 08 Throttle Position signal abnormal
C7 and C9 Engines for Caterpillar Built Machines

CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
C7 and C9 Engines for Caterpillar Built Machines

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

CID 0164 FMI 04 Injector Actuation Pressure voltage low
C7 and C9 Engines for Caterpillar Built Machines

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

Fuel Filter Differential Pressure Switch Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Engine Wiring Information
C7 and C9 Engines for Caterpillar Built Machines

CID 2417 FMI 05 Ether Injection Control Solenoid current low
C7 and C9 Engines for Caterpillar Built Machines

CID 2417 FMI 06 Ether Injection Control Solenoid current high
C7 and C9 Engines for Caterpillar Built Machines

Digital Sensor Supply Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C7 and C9 Engines for Caterpillar Built Machines

CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high
C7 and C9 Engines for Caterpillar Built Machines

CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
C7 and C9 Engines for Caterpillar Built Machines

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C7 and C9 Engines for Caterpillar Built Machines

CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C7 and C9 Engines for Caterpillar Built Machines

CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
C7 and C9 Engines for Caterpillar Built Machines

Air Inlet Heater Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

MID 039 - CID 0096 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0096 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0586 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0586 - FMI 12
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0588 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 08
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2280 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

CID 0174 FMI 03 Fuel Temperature open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines

Sensors and Electrical Connectors
C7 and C9 Engines for Caterpillar Built Machines

Throttle Switch Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Low Engine Oil Pressure Lamp Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines

Electrical Component and Connector Locations
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0110 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0110 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2300 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0600 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System

CID 0190 FMI 08 Engine Speed signal abnormal
C7 and C9 Engines for Caterpillar Built Machines

CID 1785 FMI 10 Intake Manifold Pressure Signal abnormal rate of change
C7 and C9 Engines for Caterpillar Built Machines

Service Magazine

Parts are Now Available to Make Jump Start Receptacle on Cat® Product {1463}
2014/03/04

A New Antenna Assembly is Now Available for the ROPS on Certain Excavators and Mobile Hydraulic Power Units {1408, 7301}
2014/11/19

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

New Control Harness Assembly Is Now Used on Certain Cat® Engines {1408}
New Control Harness Assembly Is Now Used on Certain Cat^® Engines {1408}