AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

290-1832 BOOM AR-1 PIECE SHORT -HIGH AMBIENT TEMPERATURE S/N ELR1-UP; FAR1-UP; EFT1-UP AN ATTACHMENT 336D2


IMPLEMENTS
BOOM GP
LINES GP-GREASE

EXCAVATOR 336D2 EXCAVATOR EFT
 336D2 & 336D2 L Excavators EFT00001-UP (MACHINE) POWERED BY C9 Engine SEBP6524 336D2 EFT   (2013)

IMPLEMENTS

BOOM GP
439-5688 BOOM AR-1 PIECE LONG
290-1818 BOOM AR-1 PIECE SHORT
290-1832 BOOM AR-1 PIECE SHORT
439-5686 BOOM AR-1 PIECE SHORT
BOOM GP
290-9236 BOOM GP
BOOM GP
290-9248 BOOM GP
 

#SEBP65240740
 

290-1832: BOOM AR-1 PIECE SHORT

290-1832 BOOM AR-1 PIECE SHORT -HIGH AMBIENT TEMPERATURE
S/N ELR1-UP; FAR1-UP; EFT1-UP
AN ATTACHMENT
i02687100 SEBP6524
  For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  290-9248 Y [1] BOOM GP  
  289-8047 Y [1] CYLINDER & LINES GP-BOOM (LH)  
  289-8048 Y [1] CYLINDER & LINES GP-BOOM (RH)  
  289-8051 Y [1] CYLINDER & LINES GP-STICK  
  238-1586 Y [1] LIGHTING GP-FLOOD (MASS BOOM)  
  239-1626 Y [1] LINES GP-BOOM  
  201-2816 Y [1] LINES GP-GREASE (BOOM)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP65240741
 

439-5686: BOOM AR-1 PIECE SHORT

439-5686 BOOM AR-1 PIECE SHORT -COLD WEATHER
S/N FAR1-UP; EFT1-UP
AN ATTACHMENT
i05359073 SEBP6524
  For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  290-9248 Y [1] BOOM GP  
  369-9685 Y [1] CYLINDER & LINES GP-BOOM (LH)  
  369-9686 Y [1] CYLINDER & LINES GP-BOOM (RH)  
  369-9687 Y [1] CYLINDER & LINES GP-STICK  
  238-1586 Y [1] LIGHTING GP-FLOOD (MASS BOOM)  
  239-1626 Y [1] LINES GP-BOOM  
  201-2816 Y [1] LINES GP-GREASE (BOOM)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP65240742
 

290-9236: BOOM GP

290-9236 BOOM GP
S/N ELR1-UP; FAR1-UP; EFT1-UP
6.5-M (21.3-FT)
PART OF 290-1843, 290-1844, 439-5688 BOOM AR-1 PIECE LONG
AN ATTACHMENT
i05544916 SEBP6524
2909236 BOOM GP Parts scheme
  For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 093-0074 B [1] SHIM (1-MM THK)  
2. 093-0349 [1] WASHER (22X60X6-MM THK)  
3. 166-1489 [2] SHIM (2-MM THK)  
4. 192-8321 [1] PIN  
5. 201-2771 [1] WASHER (26X90X8-MM THK)  
6. 251-2547 [1] PIN AS  
7. 421-3469 [1] BOOM & BEARING AS  
7A. 236-8561 [2] BUSHING  
    -OR-
  228-5621 [2] BUSHING  
7B. 101-2277 [5] PLATE  
7C. 113-2276 [1] MANIFOLD  
7D. 117-5604 M [16] STUD (M10X1.5X23-MM)  
7E. 178-0711 [2] BLOCK-MOUNTING  
7F. [2] BAR  
8. 093-0366 [1] SPACER (93X130X12-MM THK)  
9. 103-5246 [1] SPACER (123X150X14-MM THK)  
10. 113-2963 [1] PIN AS  
11. 147-3957 B [1] SHIM (0.5-MM THK)  
12. 166-1490 [2] SHIM (2-MM THK)  
13. 166-1498 [2] SEAL-LIP TYPE  
14. 4I-4978 [2] SPACER (113X150X8-MM THK)  
15. 4I-5005 [2] PLATE  
16. 453-2852 M [1] BOLT (M24X3X40-MM)  
17. 451-2176 [1] WASHER-HARD (22X35X3.5-MM THK)  
18. 451-2177 [1] WASHER-HARD (26X44X4-MM THK)  
19. 451-2180 M [6] BOLT (M16X2X35-MM)  
20. 453-2844 M [1] BOLT (M20X2.5X30-MM)  
21. 451-2175 [6] WASHER-HARD (17.5X30X3.5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP65240743
 

290-9248: BOOM GP

290-9248 BOOM GP
S/N FAR1-UP; EFT1-UP
6.18-M (20.28-FT)
PART OF 290-1818, 290-1832, 439-5686 BOOM AR-1 PIECE SHORT
AN ATTACHMENT
i02687098 SEBP6524
2909248 BOOM GP Parts scheme
  For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 093-0074 B [1] SHIM (1-MM THK)  
2. 093-0349 [1] WASHER (22X60X6-MM THK)  
3. 166-1489 [2] SHIM (2-MM THK)  
4. 192-8321 [1] PIN  
5. 201-2771 [1] WASHER (26X90X8-MM THK)  
6. 251-2547 [1] PIN AS  
7. 290-9249 [1] BOOM & BEARING AS  
  236-8561 [2] BUSHING  
8. 093-0366 [1] SPACER (93X130X12-MM THK)  
9. 103-5246 [1] SPACER (123X150X14-MM THK)  
10. 113-2963 [1] PIN AS  
11. 147-3957 B [1] SHIM (0.5-MM THK)  
12. 166-1490 [2] SHIM (2-MM THK)  
13. 166-1498 [2] SEAL-LIP TYPE  
14. 4I-4978 [2] SPACER (113X150X8-MM THK)  
15. 4I-5005 [2] PLATE  
16. 7X-2573 M [1] BOLT (M24X3X40-MM)  
17. 8T-4123 [1] WASHER (3.62X5.75X0.375-MM THK)  
18. 8T-4167 [1] WASHER-HARD (26X44X4-MM THK)  
19. 8T-4779 M [6] BOLT (M16X2X35-MM)  
20. 8T-4780 M [1] BOLT (M20X2.5X30-MM)  
21. 9X-8257 [6] WASHER (17.5X30X3.5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP65240744
 

290-9248: BOOM GP

290-9248 BOOM GP
S/N ELR1-UP; FAR1-UP; EFT1-UP
6.18-M (20.28-FT)
PART OF 290-1818, 290-1832, 439-5686 BOOM AR-1 PIECE SHORT
Type 1
AN ATTACHMENT
i05532652 SEBP6524
2909248 BOOM GP Parts scheme
  For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 093-0074 [1] SHIM (1-MM THK)  
2. 093-0349 [1] WASHER (22X60X6-MM THK)  
3. 166-1489 [2] SHIM (2-MM THK)  
4. 192-8321 [1] PIN  
5. 201-2771 [1] WASHER (26X90X8-MM THK)  
6. 251-2547 [1] PIN AS  
7. 427-0041 C [1] BOOM & BEARING AS  
7A. 236-8561 [2] BUSHING  
    -OR-
  228-5621 [2] BUSHING  
8. 093-0366 [1] SPACER (93X130X12-MM THK)  
9. 103-5246 [1] SPACER (123X150X14-MM THK)  
10. 113-2963 [1] PIN AS  
11. 147-3957 B [1] SHIM (0.5-MM THK)  
12. 166-1490 [2] SHIM (2-MM THK)  
13. 166-1498 [2] SEAL-LIP TYPE  
14. 4I-4978 [2] SPACER (113X150X8-MM THK)  
15. 4I-5005 [2] PLATE  
16. 7X-2573 M [1] BOLT (M24X3X40-MM)  
17. 8T-4123 [1] WASHER (3.62X5.75X0.375-MM THK)  
18. 8T-4167 [1] WASHER-HARD (26X44X4-MM THK)  
19. 8T-4779 M [6] BOLT (M16X2X35-MM)  
20. 8T-4780 M [1] BOLT (M20X2.5X30-MM)  
21. 9X-8257 [6] WASHER (17.5X30X3.5-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP65240745
 

290-9248: BOOM GP

290-9248 BOOM GP
S/N ELR1-UP; FAR1-UP; EFT1-UP
6.18-M (20.28-FT)
PART OF 290-1818, 290-1832, 439-5686 BOOM AR-1 PIECE SHORT
Type 2
AN ATTACHMENT
i05811713 SEBP6524
2909248 BOOM GP Parts scheme
  For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 093-0074 [1] SHIM (1-MM THK)  
2. 093-0349 [1] WASHER (22X60X6-MM THK)  
3. 166-1489 [2] SHIM (2-MM THK)  
4. 192-8321 [1] PIN  
5. 201-2771 [1] WASHER (26X90X8-MM THK)  
6. 251-2547 [1] PIN AS  
7. 450-3489 C [1] BOOM & BEARING AS  
7A. 236-8561 [2] BUSHING  
    -OR-
  228-5621 [2] BUSHING  
8. 093-0366 [1] SPACER (93X130X12-MM THK)  
9. 103-5246 [1] SPACER (123X150X14-MM THK)  
10. 113-2963 [1] PIN AS  
11. 147-3957 B [1] SHIM (0.5-MM THK)  
12. 166-1490 [2] SHIM (2-MM THK)  
13. 166-1498 [2] SEAL-LIP TYPE  
14. 4I-4978 [2] SPACER (113X150X8-MM THK)  
15. 4I-5005 [2] PLATE  
16. 453-2852 M [1] BOLT (M24X3X40-MM)  
17. 451-2176 [1] WASHER-HARD (22X35X3.5-MM THK)  
18. 451-2177 [1] WASHER-HARD (26X44X4-MM THK)  
19. 451-2180 M [6] BOLT (M16X2X35-MM)  
20. 453-2844 M [1] BOLT (M20X2.5X30-MM)  
21. 451-2175 [6] WASHER-HARD (17.5X30X3.5-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP65240746
 

290-9248: BOOM GP

290-9248 BOOM GP
S/N ELR1-UP; FAR1-UP; EFT1-UP
6.18-M (20.28-FT)
PART OF 290-1818, 290-1832, 439-5686 BOOM AR-1 PIECE SHORT
Type 3
AN ATTACHMENT
i06732036 SEBP6524
2909248 BOOM GP Parts scheme
  For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 093-0074 B [1] SHIM (1-MM THK)  
2. 093-0349 [1] WASHER (22X60X6-MM THK)  
3. 166-1489 [2] SHIM (2-MM THK)  
4. 192-8321 [1] PIN  
5. 201-2771 [1] WASHER (26X90X8-MM THK)  
6. 251-2547 [1] PIN AS  
7. 511-9167 C [1] BOOM & BEARING AS  
7A. 228-5621 [2] BUSHING  
8. 093-0366 [1] SPACER (93X130X12-MM THK)  
9. 103-5246 [1] SPACER (123X150X14-MM THK)  
10. 113-2963 [1] PIN AS  
11. 147-3957 B [1] SHIM (0.5-MM THK)  
12. 166-1490 [2] SHIM (2-MM THK)  
13. 166-1498 [2] SEAL-LIP TYPE  
14. 4I-4978 [2] SPACER (113X150X8-MM THK)  
15. 4I-5005 [2] PLATE  
16. 453-2852 M [1] BOLT (M24X3X40-MM)  
17. 451-2176 [1] WASHER-HARD (22X35X3.5-MM THK)  
18. 451-2177 [1] WASHER-HARD (26X44X4-MM THK)  
19. 451-2180 M [6] BOLT (M16X2X35-MM)  
20. 453-2844 M [1] BOLT (M20X2.5X30-MM)  
21. 451-2175 [6] WASHER-HARD (17.5X30X3.5-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP65240747
 

324-1093: BOOM GP

324-1093 BOOM GP -GRADE CONTROL
S/N ELR1-UP; FAR1-UP; EFT1-UP
6.5-M (21.3-FT)
PART OF 314-3615 BOOM AR-1 PIECE LONG
AN ATTACHMENT
i03027903 SEBP6524
3241093 BOOM GP Parts scheme
  For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 093-0074 B [1] SHIM (1-MM THK)  
2. 093-0349 [1] WASHER (22X60X6-MM THK)  
3. 166-1489 [2] SHIM (2-MM THK)  
4. 192-8321 [1] PIN  
5. 201-2771 [1] WASHER (26X90X8-MM THK)  
6. 251-2547 [1] PIN AS  
7. 421-3470 [1] BOOM & BEARING AS  
7A. 236-8561 [2] BUSHING  
8. 093-0366 [1] SPACER (93X130X12-MM THK)  
9. 103-5246 [1] SPACER (123X150X14-MM THK)  
10. 113-2963 [1] PIN AS  
11. 147-3957 B [1] SHIM (0.5-MM THK)  
12. 166-1490 [2] SHIM (2-MM THK)  
13. 166-1498 [2] SEAL-LIP TYPE  
14. 4I-4978 [2] SPACER (113X150X8-MM THK)  
15. 4I-5005 [2] PLATE  
16. 453-2852 M [1] BOLT (M24X3X40-MM)  
17. 451-2176 [1] WASHER-HARD (22X35X3.5-MM THK)  
18. 451-2177 [1] WASHER-HARD (26X44X4-MM THK)  
19. 451-2180 M [6] BOLT (M16X2X35-MM)  
20. 453-2844 M [1] BOLT (M20X2.5X30-MM)  
21. 451-2175 [6] WASHER-HARD (17.5X30X3.5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP65240748
 

192-8320: LINES GP-GREASE

192-8320 LINES GP-GREASE -BOOM
S/N ELR1-UP; FAR1-UP; EFT1-UP
PART OF 290-1843, 290-1844, 314-3615, 439-5688 BOOM AR-1 PIECE LONG
FOR USE WITH 6.5-M (21.3-FT) BOOM
AN ATTACHMENT
i01614412 SEBP6524
1928320 LINES GP-GREASE Parts scheme
  For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [5] FITTING-GREASE (1/8-27 PTF)  
2. 5K-9243 [2] ELBOW-FLARED  
3. 134-9137 [1] HOSE AS  
4. 141-3538 [1] HOSE AS  
    (EACH HOSE AS INCLUDES)
  105-6431 [1] CONNECTOR  
5. 166-1579 [4] CLIP  
6. 294-1455 I [1] HOSE AS  
6A. 105-6431 [1] CONNECTOR  
7. 212-2829 [1] TUBE AS  
8. 212-2830 [1] TUBE AS  
9. 033-8248 [5] CLIP (LOOP)  
10. 6L-3616 [2] CONNECTOR  
11. 8M-2772 [2] CLIP (LOOP)  
12. 8T-4121 [11] WASHER-HARD (11X21X2.5-MM THK)  
13. 8T-4133 M [6] NUT (M10X1.5-THD)  
14. 8T-4191 M [5] BOLT (M10X1.5X16-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP65240749
 

201-2816: LINES GP-GREASE

201-2816 LINES GP-GREASE -BOOM
S/N ELR1-UP; FAR1-UP; EFT1-UP
PART OF 290-1818, 290-1832, 439-5686 BOOM AR-1 PIECE SHORT
FOR USE WITH 6.2-M (20.3-FT) BOOM
AN ATTACHMENT
i01578519 SEBP6524
2012816 LINES GP-GREASE Parts scheme
  For full view, you need register

Parts for your 336D2 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [5] FITTING-GREASE (1/8-27 PTF)  
2. 5K-9243 [2] ELBOW-FLARED  
3. 134-9137 [1] HOSE AS  
4. 141-3538 [1] HOSE AS  
5. 154-0690 I [1] HOSE AS  
    (EACH HOSE AS INCLUDES)
  105-6431 [1] CONNECTOR  
6. 166-1579 [3] CLIP  
7. 212-2829 [1] TUBE AS  
8. 212-2830 [1] TUBE AS  
9. 033-8248 [4] CLIP (LOOP)  
10. 6L-3616 [2] CONNECTOR  
11. 8M-2772 [2] CLIP (LOOP)  
12. 8T-4121 [9] WASHER-HARD (11X21X2.5-MM THK)  
13. 8T-4133 M [5] NUT (M10X1.5-THD)  
14. 8T-4191 M [4] BOLT (M10X1.5X16-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

Information:

Operation and Maintenance Manual
Boom, Stick and Bucket Operation
336D2 and 340D2 Excavators
Boom and Stick Linkage - Lubricate
336D2 and 340D2 Excavators
Boom/Stick/Bucket Combinations
336D2 and 340D2 Excavators
Specifications
Boom - 6.2 m (20.28 ft)
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications
Boom - 6.5 m (21.33 ft)
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications
Disassembly and Assembly
Boom Bearings and Seals - Remove and Install
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems
Boom - Remove
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems
Boom - Install
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems
Service Magazine
Service Limit of the Bushings At the Front Linkages Are Now Available on Certain Excavators {5456, 5457, 5458, 6060, 6301, 6302, 6460, 6501, 6502, 6516, 6521, 6535, 6536}
Service Limit of the Bushings At the Front Linkages Are Now Available on Certain Excavators {5456, 5457, 5458, 6060, 6301, 6302, 6460, 6501, 6502, 6516, 6521, 6535, 6536}
A New Boom Assembly is Now Available for Certain Excavators with Mass Boom {6501}
A New Boom Assembly is Now Available for Certain Excavators with Mass Boom {6501}

Caterpillar Parts SIS Catalog 336D2 :

290-1818 BOOM AR-1 PIECE SHORT
439-5688 BOOM AR-1 PIECE LONG
314-3615 BOOM AR-1 PIECE LONG
290-1844 BOOM AR-1 PIECE LONG
290-1843 BOOM AR-1 PIECE LONG
VALVE GP-TRAVEL COUNTERBALANCE
322-8714 VALVE GP-TRAVEL COUNTERBALANCE
VALVE GP-SWING CUSHION
322-8716 VALVE GP-SWING CUSHION
VALVE GP-SWING CUSHION
259-0680 VALVE GP-SWING CUSHION
439-5686 BOOM AR-1 PIECE SHORT
BOOM GP
290-9236 BOOM GP
BOOM GP
290-9248 BOOM GP
BOOM GP
290-9248 BOOM GP
BOOM GP
290-9248 BOOM GP
BOOM GP
290-9248 BOOM GP
BOOM GP
324-1093 BOOM GP
LINES GP-GREASE
192-8320 LINES GP-GREASE
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.