488-0675 WIRING GP-FRONT -GRADE CONTROL, STICK S/N ETC1-UP PART OF 488-1175 STICK AR-HOE Type 2 AN ATTACHMENT 349E L

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 488-0675 WIRING GP-
1. 319-0878 WIRING GP-
2. 349-6154 WIRING GP-
3. 345-6734 WIRING GP-
4. 430-4645 WIRING GP-

POWER TRAIN

DRIVE GP-FINAL

5. 333-3036 DRIVE GP-F
6. 353-0527 DRIVE GP-F
7. 353-0528 DRIVE GP-F
8. 460-4988 DRIVE GP-F
9. 480-7428 DRIVE GP-F
0. INFORMATION

EXCAVATOR 349E L EXCAVATOR ETC
349E L & 349E L-VG Excavators ETC00001-UP (MACHINE) POWERED BY C13 Engine SEBP6539 349E L ETC (2014)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

488-0674 WIRING GP-FRONT

488-0675 WIRING GP-FRONT

319-0878 WIRING GP-PLATFORM

349-6154 WIRING GP-SENSOR

345-6734 WIRING GP-UNIT INJECTOR

#SEBP65390400

488-0675: WIRING GP-FRONT

WIRING GP-FRONT

488-0675 WIRING GP-FRONT -GRADE CONTROL, STICK
S/N ETC1-UP
PART OF 488-1175 STICK AR-HOE
Type 2
AN ATTACHMENT

i07059525 SEBP6539

For full view, you need register

Parts for your 349E L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[21]	STRAP-CABLE
2.	7K-1181 C	[2]	STRAP-CABLE
3.	116-0118	[1]	CLIP
4.	525-9129 CY	[1]	HARNESS AS-FRONT (STICK)
5.	4P-7581 C	[2]	CLIP (LADDER)
6.	5P-8522	[1]	GROMMET
7.	7X-2621 M	[1]	BOLT (M10X1.5X12-MM)
8.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP65390401

319-0878: WIRING GP-PLATFORM

WIRING GP-PLATFORM

319-0878 WIRING GP-PLATFORM
S/N ETC1-UP
PART OF 350-8399 CONTROL & MONITOR GP-CAB

i04011129 SEBP6539

For full view, you need register

Parts for your 349E L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-5169	[1]	GUARD-SWITCH
2.	3S-2093	[14]	STRAP-CABLE
3.	6S-4039	[1]	GROMMET
4.	7G-1060	[1]	STRAP AS-GROUND
5.	7K-1181	[5]	STRAP-CABLE
6.	111-4836	[7]	CLIP
7.	111-4837	[1]	CLIP
8.	116-0118	[6]	CLIP
9.	234-1122	[1]	COVER
10.	301-2981	[1]	SWITCH AS-TOGGLE
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	112-4550 E		SLEEVE (19-CM)
	271-2178	[1]	SWITCH AS-TOGGLE (SECONDARY SHUTDOWN)
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
11.	360-6291	[1]	HARNESS AS-PLATFORM
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[15]	STRAP-CABLE
	8T-8737	[5]	PLUG-SEAL
	9W-0852	[8]	PIN-CONNECTOR (14-GA TO 16-GA)
	9W-0844	[5]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(20-CM)
	9X-3402	[24]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	2L-8069	[3]	TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)
	9X-3401	[13]	PIN-CONNECTOR (16-GA TO 18-GA)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	230-4011	[5]	PLUG AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	264-7029	[1]	SEAL-CONNECTOR
	230-4013	[1]	PLUG AS-CONNECTOR (3-PIN)
	264-7030	[1]	SEAL-CONNECTOR
	230-5008	[1]	PLUG AS-CONNECTOR (4-PIN)
	264-7031	[1]	SEAL-CONNECTOR
	237-0227	[3]	PLUG AS-CONNECTOR (3-PIN)
			(EACH INCLUDES)
	264-7030	[1]	SEAL-CONNECTOR
	328-0076	[2]	RECEPTACLE AS-CONNECTOR (12-PIN)
	342-2972	[5]	CAP-CONNECTOR (2-PIN)
	342-2973	[4]	CAP-CONNECTOR (3-PIN)
	342-2978	[1]	CAP-CONNECTOR (4-PIN)
12.	319-1260	[2]	PANEL
13.	328-0077	[2]	CAP
14.	328-0119	[1]	SHEET
15.	096-6166	[2]	WASHER-HARD (4.5X9X1-MM THK)
16.	132-5789	[3]	CLIP (LADDER)
18.	7X-2621 M	[6]	BOLT (M10X1.5X12-MM)
19.	8T-0337 M	[2]	SCREW-MACHINE (M4X0.7X12-MM)
20.	8T-4121	[21]	WASHER-HARD (11X21X2.5-MM THK)
21.	8T-4136 M	[4]	BOLT (M10X1.5X25-MM)
22.	8T-4137 M	[8]	BOLT (M10X1.5X20-MM)
23.	8T-4191 M	[3]	BOLT (M10X1.5X16-MM)
24.	204-1611	[1]	STRAP (DUAL)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP65390402

349-6154: WIRING GP-SENSOR

WIRING GP-SENSOR

349-6154 WIRING GP-SENSOR
S/N TXM1-UP
PROVIDE A WIRING GROUP WITH COOLANT TEMPERATURE HARNESS
PART OF 442-9567 ENGINE AR-COMPLETE
FOR USE WITH EXTERNAL HARNESS

i04292141 SEBP6539

For full view, you need register

Parts for your 349E L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	290-1993	[2]	STRAP-CABLE
2.	349-7699	[1]	BRACKET
3.	101-3129 M	[1]	STUD (M10X1.5-THD)
4.	362-1505 Y	[1]	HARNESS AS-SENSOR (COOLANT TEMPERATURE)
5.	4P-7581	[1]	CLIP (LADDER)
6.	6V-5215 M	[1]	BOLT (M8X1.25X16-MM)
7.	6V-5839	[1]	WASHER (11X21X2.5-MM THK)
8.	9M-1974	[1]	WASHER-HARD (8.8X16X2-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP65390403

345-6734: WIRING GP-UNIT INJECTOR

WIRING GP-UNIT INJECTOR

345-6734 WIRING GP-UNIT INJECTOR
S/N TXM1-UP
PROVIDES A WIRING GP TO OPERATE MEUI-C INJECTORS. ALSO CONTAINS COOLANT TEMP PASS THROUGH WIRES.
PART OF 442-9567 ENGINE AR-COMPLETE
FOR USE WITH COOLANT TEMP JUMPER HARNESS
CANNOT BE USED WITH BRAKES AND/OR IVA

i04292142 SEBP6539

3456734 WIRING GP-UNIT INJECTOR Parts scheme

For full view, you need register

Parts for your 349E L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	418-2031 Y	[1]	HARNESS AS-ENGINE
2.	208-9277 M	[3]	BOLT-FLANGE HEAD (M6X1X20-MM)
3.	359-4892	[1]	RING-RETAINING
4.	359-4893	[1]	RING-RETAINING
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP65390404

430-4645: WIRING GP-VALVE

WIRING GP-VALVE

430-4645 WIRING GP-VALVE
S/N ETC1-UP
PART OF 432-7426 ELECTRICAL AR

i05537191 SEBP6539

For full view, you need register

Parts for your 349E L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4I-7889	[2]	SPACER (11X25X45-MM THK)
2.	111-4836	[1]	CLIP
3.	116-0118	[2]	CLIP
4.	266-7379	[1]	STRAP-CABLE
5.	427-0044	[1]	HARNESS AS-VALVE
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[10]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[14]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[3]	STRAP-CABLE
	8T-8737	[2]	PLUG-SEAL
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(25-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)
	9X-3402	[16]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[16]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	9X-3401	[10]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[10]	PIN-CONNECTOR (14-GA TO 16-GA)
	155-2270	[8]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
	264-7029	[1]	SEAL-CONNECTOR
	230-4013	[2]	PLUG AS-CONNECTOR (3-PIN)
	237-0227	[2]	PLUG AS-CONNECTOR (3-PIN)
			(EACH PLUG AS INCLUDES)
	264-7030	[1]	SEAL-CONNECTOR
	243-4509	[1]	RECEPTACLE AS-CONNECTOR (8-PIN)
	243-4510	[1]	RECEPTACLE AS-CONNECTOR (12-PIN)
6.	427-0045	[1]	BRACKET AS-VALVE
7.	132-5789	[5]	CLIP (LADDER)
8.	134-3299	[1]	GROMMET
9.	204-1611	[4]	STRAP (DUAL)
10.	177-2215	[3]	STRAP-DUAL CLAMP
11.	3S-2093	[14]	STRAP-CABLE
12.	7K-1181	[10]	STRAP-CABLE
13.	8T-4121	[7]	WASHER-HARD (11X21X2.5-MM THK)
14.	451-2176	[2]	WASHER-HARD (22X35X3.5-MM THK)
15.	8T-4137 M	[2]	BOLT (M10X1.5X20-MM)
16.	8T-4191 M	[3]	BOLT (M10X1.5X16-MM)
17.	8T-5005 M	[1]	BOLT (M10X1.5X70-MM)
18.	453-2845 M	[2]	BOLT (M20X2.5X40-MM)
19.	8T-6466 M	[1]	BOLT (M10X1.5X60-MM)
20.	269-7678	[1]	CLIP
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP65390405

333-3036: DRIVE GP-FINAL

DRIVE GP-FINAL

333-3036 DRIVE GP-FINAL -WITHOUT MOTOR
S/N ETC1-163
PART OF 353-0528 DRIVE GP-FINAL
FIELD REPLACEMENT ORDER @@@@@521-3847@@@@@, @@@@@521-3848@@@@@

i04316228 SEBP6539

For full view, you need register

Parts for your 349E L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2R-0524	[2]	CONE-BEARING
2.	2R-0525	[2]	CUP-BEARING
3.	3E-2338	[2]	PLUG-PIPE
4.	4I-7576	[14]	WASHER (66.3X104X3-MM THK)
5.	7Y-0661	[3]	SHAFT-PLANETARY
6.	7Y-0662	[4]	SHAFT-PLANETARY
7.	199-4583	[11]	BEARING AS
8.	7Y-0808 B	[1]	SHIM (1.6-MM THK)
9.	7Y-1469	[1]	COUPLING
10.	7Y-1470	[1]	GEAR-SUN (21-TEETH)
11.	7Y-1472 B	[1]	SHIM (0.15-MM THK)
	7Y-1473 B	[1]	SHIM (0.3-MM THK)
	7Y-1474 B	[1]	SHIM (0.4-MM THK)
	7Y-1475 B	[1]	SHIM (0.5-MM THK)
	7Y-1476 B	[1]	SHIM (0.6-MM THK)
	7Y-1477 B	[1]	SHIM (0.7-MM THK)
	7Y-1478 B	[1]	SHIM (0.8-MM THK)
	7Y-1479 B	[1]	SHIM (1-MM THK)
	7Y-1480 B	[1]	SHIM (1.6-MM THK)
20.	7Y-1482	[1]	CARRIER-PLANETARY
21.	7Y-1483	[1]	GEAR-RING (63-TEETH)
22.	7Y-1485	[1]	CARRIER-PLANETARY
23.	7Y-1487	[1]	GEAR-RING (85-TEETH)
24.	7Y-1488	[1]	CARRIER AS
	7Y-0656	[3]	SHAFT-PLANETARY
25.	7Y-1491	[1]	GEAR-SUN (21-TEETH)
26.	7Y-1493	[1]	SPACER (8.7X50X14-MM THK)
27.	7Y-1495	[3]	GEAR-PLANETARY (29-TEETH)
28.	7Y-1498	[1]	COVER
29.	7Y-1499	[3]	GEAR-PLANETARY (20-TEETH)
30.	7Y-1504	[4]	GEAR-PLANETARY (20-TEETH)
31.	454-6929 M	[20]	BOLT (M24X3X190-MM)
32.	110-7217	[2]	RING-RETAINING
33.	114-1541	[6]	PIN-DOWEL
34.	169-5559	[1]	GEAR-SUN (26-TEETH)
35.	199-4719	[1]	GEAR-COUPLING
36.	227-6048	[12]	WASHER (26X40X4-MM THK)
37.	255-2272	[1]	SEAL GP-DUO-CONE
38.	333-3033	[1]	HOUSING-MOTOR
39.	333-3034	[1]	HOUSING-GEAR
40.	333-3035	[1]	PLATE
41.	094-0584	[6]	WASHER (40.3X72X1-MM THK)
42.	199-4582	[3]	BEARING AS
43.	095-0891	[7]	PIN-SPRING
44.	096-3216 M	[2]	SETSCREW-SOCKET (M12X1.75X12-MM)
45.	4S-5924	[1]	SEAL-O-RING
46.	6V-8133 M	[12]	BOLT (M24X3X80-MM)
47.	6V-8200 M	[20]	BOLT-SOCKET HEAD (M12X1.75X35-MM)
48.	7M-8485	[2]	SEAL-O-RING
49.	7Y-1484	[1]	SPACER (191X221X8.5-MM THK)
50.	7Y-1492	[2]	SPACER (67X101.1X10-MM THK)
51.	8C-5240	[1]	SEAL-O-RING
52.	8T-3957 M	[10]	BOLT-SOCKET HEAD (M12X1.75X30-MM)
53.	451-2177	[20]	WASHER-HARD (26X44X4-MM THK)
54.	451-2182	[20]	WASHER-HARD (13.5X25.5X3-MM THK)
55.	8T-4240	[3]	RING-RETAINING

	1U-8846 BF		SEALANT-GASKET
	B		USE AS REQUIRED
	F		NOT SHOWN
	M		METRIC PART

#SEBP65390406

353-0527: DRIVE GP-FINAL

DRIVE GP-FINAL

353-0527 DRIVE GP-FINAL -WITH MOTOR, SPROCKET
S/N ETC1-163
PART OF 353-0525 FASTENER GP-FINAL DRIVE

i04269576 SEBP6539

For full view, you need register

Parts for your 349E L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	115-6399 Y	[1]	SPROCKET GP (NON-SEGMENTED)
2.	353-0528 Y	[1]	DRIVE GP-FINAL
	Y		SEPARATE ILLUSTRATION

#SEBP65390407

353-0528: DRIVE GP-FINAL

DRIVE GP-FINAL

353-0528 DRIVE GP-FINAL -WITH MOTOR
S/N ETC1-163
PART OF 353-0527 DRIVE GP-FINAL

i04273970 SEBP6539

For full view, you need register

Parts for your 349E L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	225-4504 Y	[1]	MOTOR & MTG GP-TRAVEL
2.	333-3036 Y	[1]	DRIVE GP-FINAL (WITHOUT MOTOR)
	Y		SEPARATE ILLUSTRATION

#SEBP65390408

460-4988: DRIVE GP-FINAL

DRIVE GP-FINAL

460-4988 DRIVE GP-FINAL -WITH MOTOR, SPROCKET
S/N ETC164-UP
PART OF 353-0525 FASTENER GP-FINAL DRIVE

i06578138 SEBP6539

For full view, you need register

Parts for your 349E L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	115-6399 Y	[1]	SPROCKET GP (NON-SEGMENTED)
2.	480-7428 Y	[1]	DRIVE GP-FINAL
	Y		SEPARATE ILLUSTRATION

#SEBP65390409

480-7428: DRIVE GP-FINAL

DRIVE GP-FINAL

480-7428 DRIVE GP-FINAL -WITH MOTOR
S/N ETC164-UP
PART OF 460-4988 DRIVE GP-FINAL

i06710118 SEBP6539

For full view, you need register

Parts for your 349E L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	417-7195 Y	[1]	MOTOR & MTG GP-TRAVEL
2.	480-7429 Y	[1]	DRIVE GP-FINAL (WITHOUT MOTOR)
	Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Operation and Maintenance Manual

Battery or Battery Cable - Inspect/Replace
349E Excavator

Battery - Recycle
349E Excavator

SmartBoom Operation - If Equipped
349E Excavator

SmartBoom Control - If Equipped
349E Excavator

Fuses - Replace
349E Excavator

Power Receptacle - If Equipped
349E Excavator

Camera Harness - Disconnect and Connect
349E Excavator

Battery Disconnect Switch
349E Excavator

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Installation of the 336-6360 Cab Wiring Gp {1408}
Installation of the 336-6360 Cab Wiring Gp {1408}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Installation Procedure for Warning Beacon on Certain E-Series Excavators {1408, 1431, 7301}
Installation Procedure for Warning Beacon on Certain E-Series Excavators {1408, 1431, 7301}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Installation of the 350-8401 Cab Wiring Gp on Certain Hydraulic Excavators{1408, 7301}
Installation of the 350-8401 Cab Wiring Gp on Certain Hydraulic Excavators{1408, 7301}

Installation of the 342-3232 Chassis Wiring Gp on Certain Hydraulic Excavators{1408}
Installation of the 342-3232 Chassis Wiring Gp on Certain Hydraulic Excavators{1408}

Installation Procedure for the 453-8720 Cab Wiring Gp on Certain Hydraulic Excavators{1408}
Installation Procedure for the 453-8720 Cab Wiring Gp on Certain Hydraulic Excavators{1408}

Installation Procedure for the 462-1658 Coupler Control Ar on Certain Hydraulic Excavators{1408, 5057, 5133, 7301, 7405, 7557}
Installation Procedure for the 462-1658 Coupler Control Ar on Certain Hydraulic Excavators{1408, 5057, 5133, 7301, 7405, 7557}

Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}
Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}

New Procedure to Rework Fan Drive Group on Certain 349E, 349F, 349F XE, and 352F XE Excavators {1356, 1408, 7610, 7620}
New Procedure to Rework Fan Drive Group on Certain 349E, 349F, 349F XE, and 352F XE Excavators {1356, 1408, 7610, 7620}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Specifications

Pressure Switch (Refrigerant Pressure Cutoff)
349E Excavator Machine System Specifications

Pressure Sensor (ARD Main Fuel)
C13 Engines for Caterpillar Built Machines

Pressure Sensor (ARD Pilot Fuel)
C13 Engines for Caterpillar Built Machines

Electronic Unit Injector Wiring
C13 Engines for Caterpillar Built Machines

Wiring (Cab)
349E Excavator Machine System Specifications

Tool Operating Manual

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Service Letter-China

Service Letter-Asia

Systems Operation

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Cat Machines

Switches
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System

Sensors
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Service Letter-APD

Testing and Adjusting

Electric Starting System - Test
C13 Engines for Caterpillar Built Machines

Wiring Harness (Open Circuit) - Test
349E Excavator Machine Electronic Control System

Wiring Harness (Short Circuit) - Test
349E Excavator Machine Electronic Control System

Electrical Connector - Inspect
349E Excavator Machine Electronic Control System

System Schematic
349E Excavator Machine Electronic Control System

System Schematic
Machine Security System (MSS3i) Integrated

Troubleshooting

Electrical Connectors - Inspect
C13, C15, and C18 Tier 4 Interim Engines

ARD Ignition - Test
C13, C15, and C18 Tier 4 Interim Engines

Electrical Connectors
C13, C15, and C18 Tier 4 Interim Engines

Electrical Component and Connector Locations
349E Excavator Machine Electronic Control System

MID 299, 96-9
349E Excavator Machine Electronic Control System

MID 299, 96-4
349E Excavator Machine Electronic Control System

MID 299, 600-4
349E Excavator Machine Electronic Control System

MID 299, 600-9
349E Excavator Machine Electronic Control System

MID 299, 2300-12
349E Excavator Machine Electronic Control System

Service Magazine

Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>®</SUP> Product {1463}
2014/03/04

Rework Procedure is Available to Replace a Cab Harness Connector to Match the Harness Connector of a Field Installed Product Link Kit on Certain E Series and F Series Excavators {1408, 7301}
2014/11/17

A New Cat Grade Control Harness Routing is Now Available for Certain Excavators with Cat Grade Control Configurations {1408}
2015/07/27

A New Special Instruction is Available for Troubleshooting the Upper Window Wiper Relay Circuit on Certain 311D-349D, E Series, and F Series Excavators {1408, 7305}
2015/08/07

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

A New Cab Harness Assembly for the Air Conditioner is Now Available for Certain Excavators and Mobile Hydraulic Power Units {1408, 7301, 7320}
A New Cab Harness Assembly for the Air Conditioner is Now Available for Certain Excavators and Mobile Hydraulic Power Units {1408, 7301, 7320}

New Cab Harness Routing Is Now Available for Certain Excavators and Mobile Hydraulic Power Units {1408, 7301}
New Cab Harness Routing Is Now Available for Certain Excavators and Mobile Hydraulic Power Units {1408, 7301}

Improved Camera Cable Assembly Is Now Used on Certain Excavators, Mobile Hydraulic Power Units, and OEM Excavator Based Specialty Solutions {1408}
Improved Camera Cable Assembly Is Now Used on Certain Excavators, Mobile Hydraulic Power Units, and OEM Excavator Based Specialty Solutions {1408}

Updated Instructions for GRADE System Calibration and Measure-Up Procedure Are Now Used on Certain Excavators {7220}
Updated Instructions for GRADE System Calibration and Measure-Up Procedure Are Now Used on Certain Excavators {7220}

Caterpillar Parts SIS Catalog 349E L :

488-0675 WIRING GP-FRONT

488-0674 WIRING GP-FRONT

369-0107 WIRING GP-FRONT

336-6020 WIRING GP-FRONT

426-3720 WIRING GP-ENGINE

362-1381 WIRING GP-ELECTRONIC CONTROL

319-0878 WIRING GP-PLATFORM

349-6154 WIRING GP-SENSOR

345-6734 WIRING GP-UNIT INJECTOR

430-4645 WIRING GP-VALVE

333-3036 DRIVE GP-FINAL

353-0527 DRIVE GP-FINAL

353-0528 DRIVE GP-FINAL

460-4988 DRIVE GP-FINAL

Truck sale:

281,267 USD

Caterpillar 349EL, Construction
- Crawler Excavators
TOROMONT CAT
Canada

194,901 USD

Caterpillar 349EL, Construction
- Crawler Excavators
MICHIGAN CAT

302,500

Caterpillar 349EL, Construction
- Crawler Excavators
PATTEN INDUSTRIES, INC.

218,000

Caterpillar 349EL, Construction
- Crawler Excavators
HOLT CAT

135,833

Caterpillar 349EL, Construction
- Crawler Excavators
FINNING CANADA
Canada