AVSPARE.COM
parts catalog

503-8891 SENSOR & MTG GP-POSITION -GRADE CONTROL, STICK S/N DNM10001-UP PART OF 504-6345 BOOM AR-MASS 374F L




ELECTRICAL AND STARTING SYSTEM

SENSOR GP
 

#SEBP65420510
 

503-8891: SENSOR & MTG GP-POSITION

503-8891 SENSOR & MTG GP-POSITION -GRADE CONTROL, STICK
S/N DNM10001-UP
PART OF 504-6345 BOOM AR-MASS
i06754277 SEBP6542
  For full view, you need register

Parts for your 374F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 309-5695 [1] ROD AS  
  8T-4133 M [1] NUT (M10X1.5-THD)  
  9X-2065 M [1] NUT (M10X1.5-THD, LH)  
2. 345-1948 Y [1] SENSOR GP-POSITION (ROTARY)  
3. 349-5542 [1] HOLDER  
4. 398-4255 [1] SPACER  
5. 503-8892 [1] PLATE AS-SENSOR  
6. 503-8894 [1] LEVER AS  
7. 105-3487 M [1] BOLT-SOCKET HEAD (M6X1X20-MM)  
8. 131-3983 M [4] BOLT-SOCKET HEAD (M8X1.25X35-MM)  
9. 144-8073 [1] LOCKWASHER  
10. 5C-9553 M [2] BOLT (M6X1X16-MM)  
11. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
12. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
13. 9X-2039 M [2] SCREW-TRUSS HEAD (M10X1.5X35-MM)  
14. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP65420511
 

415-8038: SENSOR & MTG GP-PRESSURE

415-8038 SENSOR & MTG GP-PRESSURE
S/N DNM1-UP
PART OF 394-5365, 469-6267 MODULE AR-CLEAN EMISSIONS
i05698802 SEBP6542
  For full view, you need register

Parts for your 374F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-0472 [2] ADAPTER  
2. 127-1991 [3] SPACER (8.2X13X15-MM THK)  
3. 385-5773 [2] CONNECTOR AS  
    (EACH INCLUDES)
  5P-1046 [1] CONNECTOR  
  214-7568 [1] SEAL-O-RING  
4. 415-2415 [2] HOSE-AIR  
5. 415-8039 [1] TUBE AS  
6. 415-8040 [1] TUBE AS  
7. 415-8044 Y [1] SENSOR GP-PRESSURE (DPF DIFFERENTIAL)  
8. 415-8049 [1] BRACKET  
9. 124-6275 [4] CLAMP-HOSE  
10. 204-0813 [3] BOLT (M6X1X40-MM)  
11. 344-1200 [5] WASHER-HARD (6.6X12X2-MM THK)  
12. 344-1206 M [2] BOLT (M6X1X16-MM)  
13. 7W-3556 [2] WASHER (14.27X20.57X1.5-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP65420512
 

368-7716: SENSOR & MTG GP-SOOT

368-7716 SENSOR & MTG GP-SOOT
S/N DNM1-UP
PART OF 368-7713 INSTALLATION AR-ENG & CEM MOD
i05624630 SEBP6542
  For full view, you need register

Parts for your 374F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [2] STRAP-CABLE  
2. 359-9171 [1] SENSOR AS-NITROGEN OXIDE (ENGINE OUTPUT)  
3. 359-9172 [1] SENSOR AS-NITROGEN OXIDE (EXHAUST OUTLET)  
4. 396-6211 [2] GROMMET  
5. 397-6442 [1] PLATE AS  
6. 101-3625 [2] CLIP (LADDER)  
7. 285-6393 [4] CLIP  
8. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
9. 8T-4136 M [3] BOLT (M10X1.5X25-MM)  
10. 8T-4137 M [5] BOLT (M10X1.5X20-MM)  
11. 8T-4970 M [4] BOLT (M6X1X14-MM)  
12. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
13. 326-4516 [14] TIE-CABLE  
  M   METRIC PART
 

#SEBP65420513
 

350-6731: SENSOR GP-ENGINE

350-6731 SENSOR GP-ENGINE
S/N ENG1-UP
PART OF 376-3888 ENGINE AR-CORE
i05686761 SEBP6542
  For full view, you need register

Parts for your 374F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [4] STRAP-CABLE  
2. 6J-4608 [2] BOLT-SOCKET HEAD  
3. 366-8024 [1] BRACKET  
4. 224-9907 [1] STUD (5/16-18-THD)  
5. 234-5012 Y [1] SENSOR GP-TEMPERATURE (COOLANT)  
6. 234-5013 Y [1] SENSOR GP-TEMPERATURE (INTAKE AIR MANIFOLD)  
7. 289-3891 [1] CLIP  
8. 6V-5217 M [1] BOLT (M8X1.25X20-MM)  
9. 294-6119 [1] SENSOR GP-PRESSURE (CRANKCASE BREATHER)  
10. 293-5535 Y [1] SENSOR GP-PRESSURE (ENGINE OIL)  
11. 300-9805 Y [1] SENSOR GP-SPEED (PRIMARY, TIMING)  
12. 300-9806 Y [1] SENSOR GP-SPEED (SECONDARY, TIMING)  
13. 330-9742 [1] ELBOW AS  
  330-9741 [1] ELBOW  
  214-7568 [1] SEAL-O-RING  
14. 331-1134 Y [1] SENSOR GP-PRESSURE (ATMOSPHERIC)  
15. 331-1135 Y [1] SENSOR GP-PRESSURE (INTAKE AIR MANIFOLD)  
16. 332-0296 Y [1] SENSOR GP-PRESSURE (INTAKE AIR MANIFOLD)(NRS ABSOLUTE)  
17. 339-8822 [1] SENSOR AS-TEMPERATURE (NOX REDUCTION SYSTEM)  
18. 344-5734 Y [1] HARNESS AS-SENSOR  
19. 347-7104 [1] BRACKET AS  
20. 365-9858 Y [1] SENSOR GP-PRESSURE (DIFFERENTIAL)  
21. 0S-1588 [2] BOLT (3/8-16X1.25-IN)  
22. 0S-1617 [1] BOLT (5/16-18X0.75-IN)  
23. 137-8101 [2] SEAL-O-RING  
24. 353-5112 [1] ADAPTER AS  
  9X-0262 [1] ADAPTER  
  214-7566 [2] SEAL-O-RING  
25. 2H-3755 [2] BOLT (5/16-18X0.43-IN)  
26. 4P-7581 [1] CLIP (LADDER)  
27. 4P-8134 [1] CLIP (LADDER)  
28. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
29. 8T-0267 M [2] BOLT-SOCKET HEAD (M6X1X12-MM)  
30. 9M-1974 [7] WASHER-HARD (8.8X16X2-MM THK)  
31. 9X-8267 [2] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP65420514
 

415-5234: SENSOR GP-ENGINE

415-5234 SENSOR GP-ENGINE
S/N ENG1-UP
PART OF 499-3557 ENGINE AR-CORE
i06021228 SEBP6542
  For full view, you need register

Parts for your 374F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [5] STRAP-CABLE  
2. 0S-1618 [2] BOLT (5/16-18X1-IN)  
3. 234-5012 Y [1] SENSOR GP-TEMPERATURE (COOLANT)  
4. 234-5013 Y [1] SENSOR GP-TEMPERATURE (OUTLET AIR)  
5. 293-5535 Y [1] SENSOR GP-PRESSURE (ENGINE OIL)  
6. 300-9805 Y [1] SENSOR GP-SPEED  
7. 300-9806 Y [1] SENSOR GP-SPEED (CAMSHAFT)  
8. 331-1134 Y [1] SENSOR GP-PRESSURE (ATMOSPHERIC)  
9. 331-1135 Y [1] SENSOR GP-PRESSURE (INTAKE AIR MANIFOLD)  
10. 332-0296 Y [1] SENSOR GP-PRESSURE (INTAKE AIR MANIFOLD)(NRS INLET)  
11. 339-8822 [1] SENSOR AS-TEMPERATURE (NOX REDUCTION SYSTEM)  
  281-8802 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
12. 344-5734 Y [1] HARNESS AS-SENSOR  
13. 347-7104 [1] BRACKET AS  
14. 366-8024 [1] BRACKET  
15. 371-7163 [1] CONNECTOR AS  
  214-7568 [1] SEAL-O-RING  
  371-7162 [1] ADAPTER-ELBOW  
16. 385-1173 Y [1] SENSOR GP-PRESSURE (NRS DIFFERENTIAL)  
17. 0S-1617 [1] BOLT (5/16-18X0.75-IN)  
18. 2H-3755 [2] BOLT (5/16-18X0.43-IN)  
19. 353-5112 [1] ADAPTER AS  
  9X-0262 [1] ADAPTER  
  214-7566 [2] SEAL-O-RING  
20. 3B-1915 [2] BOLT (3/8-16X1.375-IN)  
21. 4P-7581 [1] CLIP (LADDER)  
23. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
24. 6V-5217 M [1] BOLT (M8X1.25X20-MM)  
25. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
26. 421-8565 [1] BRACKET  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP65420515
 

446-7002: SENSOR GP-LIQUID LEVEL

446-7002 SENSOR GP-LIQUID LEVEL
S/N DNM1-UP
PART OF 368-7712 LINES GP-FUEL
i05719990 SEBP6542
  For full view, you need register

Parts for your 374F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 214-7568 [1] SEAL-O-RING  
2. 281-8805 [1] RECEPTACLE AS-CONNECTOR  
3. 9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
 

#SEBP65420516
 

345-1948: SENSOR GP-POSITION

345-1948 SENSOR GP-POSITION
S/N DNM1-UP
PART OF 349-2187, 349-2273, 503-8891 SENSOR & MTG GP-POSITION
i04369139 SEBP6542
  For full view, you need register

Parts for your 374F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [3] PIN-CONNECTOR (14-GA TO 16-GA)  
3. 9X-1813 E SLEEVE (17-CM)  
  E   ORDER BY THE CENTIMETER
 

#SEBP65420517
 

293-5535: SENSOR GP-PRESSURE

293-5535 SENSOR GP-PRESSURE
S/N ENG1-UP
PART OF 350-6731, 415-5234 SENSOR GP-ENGINE
i04016970 SEBP6542
  For full view, you need register

Parts for your 374F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 274-6719 [1] SENSOR GP-PRESSURE  
2. 298-7202 [1] HARNESS AS-SENSOR  
  9X-1386 E SLEEVE (23-CM)  
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [3] PIN-CONNECTOR (14-GA TO 16-GA)  
  237-0227 [1] PLUG AS-CONNECTOR (3-PIN)  
  237-0228 [1] RECEPTACLE AS-CONNECTOR  
  E   ORDER BY THE CENTIMETER
 

#SEBP65420518
 

325-7472: SENSOR GP-PRESSURE

325-7472 SENSOR GP-PRESSURE
S/N ENG1-UP
PART OF 331-1135 SENSOR GP-PRESSURE
i04336030 SEBP6542
  For full view, you need register

Parts for your 374F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 320-3061 [1] SENSOR GP-PRESSURE  
2. 327-5221 [1] HARNESS AS-SENSOR  
  9X-1813 E SLEEVE (23-CM)  
  180-9339 [3] PIN-CONNECTOR (14-GA TO 18-GA)  
  180-9340 [3] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  281-8804 [1] PLUG AS-CONNECTOR (3-PIN)  
  264-7030 [1] SEAL-CONNECTOR  
3. 108-1304 E TUBE-HEAT SHRINK (33-MM DIA)(4-CM)  
  E   ORDER BY THE CENTIMETER
 

#SEBP65420519
 

325-8634: SENSOR GP-PRESSURE

325-8634 SENSOR GP-PRESSURE
PART OF 379-8412 BASE GP-FUEL FILTER
i03828673 SEBP6542
  For full view, you need register

Parts for your 374F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 320-3060 [1] SENSOR GP-PRESSURE (FUEL)  
2. 228-7100 [1] SEAL-O-RING  
 

Information:

Special Instruction
Instructions for Installing Rotary Position Sensor for Cat<SUP>&reg;</SUP> Grade Control on Certain Series E and Series F Excavators {5736, 7220}
Instructions for Installing Rotary Position Sensor for Cat® Grade Control on Certain Series E and Series F Excavators {5736, 7220}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
NOx Sensors Handling and Installation Procedures {191N}
NOx Sensors Handling and Installation Procedures {191N}
Machine Guidance Upgrades For Cat<SUP>&reg;</SUP> Grade Control Hydraulic Excavators {7220}
Machine Guidance Upgrades For Cat® Grade Control Hydraulic Excavators {7220}
Troubleshooting Guide for the Rotary Position Sensor for Cat<SUP>&reg;</SUP> Grade Control on Certain Series E and Series F Excavators {5736}
Troubleshooting Guide for the Rotary Position Sensor for Cat® Grade Control on Certain Series E and Series F Excavators {5736}
Procedure to Remove and Install Front Structure, Remove and Install Stick and Boom Rotary Position Sensors, and Calibrate Cat<SUP>&reg;</SUP> Grade Control, for 374F and 390F {5736}
Procedure to Remove and Install Front Structure, Remove and Install Stick and Boom Rotary Position Sensors, and Calibrate Cat® Grade Control, for 374F and 390F {5736}
Installation, Measurement, and Calibration of the Cat<SUP>&reg;</SUP> Grade Control System on E-Series and F-Series Hydraulic Excavators {5736, 7220}
Installation, Measurement, and Calibration of the Cat® Grade Control System on E-Series and F-Series Hydraulic Excavators {5736, 7220}
Technical Information Bulletin
The Rotary Position Sensor is Off-Center on Certain E series and F series Excavators{0766, 5736}
The Rotary Position Sensor is Off-Center on Certain E series and F series Excavators{0766, 5736}
Failure of Rotary Position Sensors on Certain Caterpillar Machines {1913, 5736, 5737}
Failure of Rotary Position Sensors on Certain Caterpillar Machines {1913, 5736, 5737}
Primary Engine Speed Sensor Malfunctioning, Shorted, Open Circuit {1907, 1912}
Primary Engine Speed Sensor Malfunctioning, Shorted, Open Circuit {1907, 1912}
Specifications
Coolant Temperature Sensor
C13, C15, and C18 Tier 4 Final Engines
Engine Oil Pressure Sensor
C13, C15, and C18 Tier 4 Final Engines
Inlet Manifold Air Pressure Sensor
C13, C15, and C18 Tier 4 Final Engines
Atmospheric Pressure Sensor
C13, C15, and C18 Tier 4 Final Engines
Engine Oil Pressure Sensor
C13, C15, and C18 Tier 4 Final Engines
Engine Oil Pressure Sensor
C13, C15, and C18 Tier 4 Final Engines
Coolant Temperature Sensor
C13, C15, and C18 Tier 4 Final Engines
Inlet Manifold Air Pressure Sensor
C13, C15, and C18 Tier 4 Final Engines
Speed/Timing Sensor
C13, C15, and C18 Tier 4 Final Engines
Coolant Level Sensor
C13, C15, and C18 Tier 4 Final Engines
Coolant Temperature Sensor
C13, C15, and C18 Tier 4 Final Engines
Coolant Temperature Sensor
C13, C15, and C18 Tier 4 Final Engines
Speed/Timing Sensor
C13, C15, and C18 Tier 4 Final Engines
Boost Pressure Sensor
C13, C15, and C18 Tier 4 Final Engines
Atmospheric Pressure Sensor
C13, C15, and C18 Tier 4 Final Engines
Pressure Sensor (DPF Inlet)
C13, C15, and C18 Tier 4 Final Engines
Pressure Sensor (ARD Combustion Air)
C13, C15, and C18 Tier 4 Final Engines
Speed/Timing Sensor
C13, C15, and C18 Tier 4 Final Engines
Speed/Timing Sensor
C13, C15, and C18 Tier 4 Final Engines
Speed/Timing Sensor
C13, C15, and C18 Tier 4 Final Engines
Boost Pressure Sensor
C13, C15, and C18 Tier 4 Final Engines
Pressure Sensor (NRS Absolute)
C13, C15, and C18 Tier 4 Final Engines
Inlet Manifold Air Pressure Sensor
C13, C15, and C18 Tier 4 Final Engines
Temperature Sensor (NOx Reduction System)
C13, C15, and C18 Tier 4 Final Engines
Speed/Timing Sensor
C13, C15, and C18 Tier 4 Final Engines
Speed/Timing Sensor
C13, C15, and C18 Tier 4 Final Engines
Speed/Timing Sensor
C13, C15, and C18 Tier 4 Final Engines
Speed/Timing Sensor
C13, C15, and C18 Tier 4 Final Engines
Boost Pressure Sensor
C13, C15, and C18 Tier 4 Final Engines
Inlet Manifold Air Pressure Sensor
C13, C15, and C18 Tier 4 Final Engines
Inlet Manifold Temperature Sensor
C13, C15, and C18 Tier 4 Final Engines
Speed/Timing Sensor
C13, C15, and C18 Tier 4 Final Engines
Pressure Sensor (Exhaust Differential)
C13, C15, and C18 Tier 4 Final Engines
Coolant Level Sensor
C13, C15, and C18 Tier 4 Final Engines
Magnetic Pickup
C13, C15, and C18 Tier 4 Final Engines
Pressure Sensor (NRS Differential)
C13, C15, and C18 Tier 4 Final Engines
Nitrogen Oxide Sensor - Engine Exhaust Out
C13, C15, and C18 Tier 4 Final Engines
Nitrogen Oxide Sensor - Exhaust Pipe Out
C13, C15, and C18 Tier 4 Final Engines
Nitrogen Oxide Sensor
C13, C15, and C18 Tier 4 Final Engines
Position Sensor (Stick)
374F Excavator Machine System
Position Sensor (Boom) - Mounting
374F Excavator Machine System
Inlet Manifold Air Pressure Sensor
C13, C15, and C18 Tier 4 Final Engines
Inlet Manifold Temperature Sensor
C13, C15, and C18 Tier 4 Final Engines
Pressure Sensor
374F Excavator Machine System
Nitrogen Oxide Sensor
C13, C15, and C18 Tier 4 Final Engines
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Systems Operation
Sensors
374F and 390F Excavators Tool Control System
Reuse And Salvage Guidelines
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Troubleshooting
Timing - Calibrate
C13, C15, and C18 Tier 4 Final Engines
Coolant Level - Test
C13, C15, and C18 Tier 4 Final Engines
Sensor Calibration Required - Test
C13, C15, and C18 Tier 4 Final Engines
Sensor Signal (Analog, Active) - Test
C13, C15, and C18 Tier 4 Final Engines
Sensor Signal (Analog, Passive) - Test
C13, C15, and C18 Tier 4 Final Engines
Sensor Supply - Test
C13, C15, and C18 Tier 4 Final Engines
Speed/Timing - Test
C13, C15, and C18 Tier 4 Final Engines
Sensor (Data Link Type) - Test
C13, C15, and C18 Tier 4 Final Engines
NOx Sensor - Test
C13, C15, and C18 Tier 4 Final Engines
DEF Pump Pressure Sensor - Test
C13, C15, and C18 Tier 4 Final Engines
DEF Pump Sensor Supply - Test
C13, C15, and C18 Tier 4 Final Engines
NOx Conversion Is Low
C13, C15, and C18 Tier 4 Final Engines
SCR Catalyst Inlet Temperature Sensor - Test
C13, C15, and C18 Tier 4 Final Engines
Cooling Fan Speed - Test
C13, C15, and C18 Tier 4 Final Engines
Sensor Signal (Analog, Passive) - Test
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit
Sensor Supply - Test
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit
Water in Fuel - Test
C13, C15, and C18 Tier 4 Final Engines
Sensor Signal (PWM) - Test
374F and 390F Excavators and 390F MHPU Mobile Hydraulic Power Unit
Disassembly and Assembly
Crankcase Pressure Sensor - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Engine Oil Pressure Sensor - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Crankshaft Position Sensor - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Temperature Sensor (Cooled Exhaust Gas) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Boost Pressure Sensor - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Camshaft Position Sensor - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Temperature Sensor (Catalyst Inlet) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Pressure Sensor (ARD Combustion Air) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Inlet Air Temperature Sensor - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Inlet Manifold Temperature Sensor - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Atmospheric Pressure Sensor - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Coolant Temperature Sensor - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Fuel Pressure Sensor - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Fuel Temperature Sensor - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Temperature Sensor (DPF Inlet, Flame Detect) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Pressure Sensor (DPF) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Nitrogen Oxide Sensor - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Pressure Sensor (DPF) - Remove and Install
374F Excavator C15 Engine Supplement
Exhaust Sensor Lines - Remove and Install
374F Excavator C15 Engine Supplement
Nitrogen Oxide Sensor - Remove and Install - Outlet
374F Excavator C15 Engine Supplement
Nitrogen Oxide Sensor - Remove and Install - Inlet
374F Excavator C15 Engine Supplement
Pressure Sensor (NRS Absolute) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Pressure Sensor (NRS Differential) - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
Service Magazine
New NOx Sensors Are Used on Certain Tier 4 Final Machine Engines {108F, 1335}
New NOx Sensors Are Used on Certain Tier 4 Final Machine Engines {108F, 1335}
Improvements Have Been Made to the Temperature Sensors for Certain C9 through C32 Machine Engines {7400, 7400}
Improvements Have Been Made to the Temperature Sensors for Certain C9 through C32 Machine Engines {7400, 7400}

Caterpillar Parts SIS Catalog 374F L :

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.