AIR INLET AND EXHAUST SYSTEM
AIR CLEANER GPTURBOCHARGER GP
FUEL SYSTEM
LINES GP-FUELFILTER GP-FUEL
LINES GP-FUEL
LINES GP-FUEL INJECTION
KIT-FUEL SYSTEM PARTS
AIR INLET AND EXHAUST SYSTEM
AIR CLEANER GP
#SEBP65440110
150-1714: PRECLEANER GP
150-1714 PRECLEANER GP
S/N FLA1-UP
FITS OVER 178-MM (7-IN) DIA INLET TUBE
PART OF 324-4111 AIR CLEANER & MOUNTING GP
FOR USE WITH DUAL ELEMENT AIR CLEANER
AN ATTACHMENT
S/N FLA1-UP
FITS OVER 178-MM (7-IN) DIA INLET TUBE
PART OF 324-4111 AIR CLEANER & MOUNTING GP
FOR USE WITH DUAL ELEMENT AIR CLEANER
AN ATTACHMENT
For full view, you need register
#SEBP65440111
291-5480: TURBOCHARGER GP
For full view, you need register
Parts for your 349D L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1W-9311 | [1] | CLAMP AS-TURBINE | |
| 2. | 161-6958 | [1] | CLIP-HOSE | |
| 3. | 161-6963 | [2] | CLAMP | |
| 4. | 239-5858 | [1] | CLAMP AS-COMPRESSOR | |
| 5. | 279-6060 Y | [1] | CARTRIDGE GP-TURBOCHARGER | |
| 6. | 115-7087 M | [1] | BOLT (M6X0.04X10.4-MM) | |
| 7. | 242-3360 E | HOSE (44-CM) | ||
| 8. | 258-4524 E | SLEEVE (31-CM) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP65440112
294-4585: TURBOCHARGER GP
294-4585 TURBOCHARGER GP
S/N TXF1-UP
TIER III EMISSIONS, WET CENTER SECTION, EXHAUST REAR
PART OF 424-8405 ENGINE AR-COMPLETE
Type 1
S/N TXF1-UP
TIER III EMISSIONS, WET CENTER SECTION, EXHAUST REAR
PART OF 424-8405 ENGINE AR-COMPLETE
Type 1
For full view, you need register
#SEBP65440113
294-4585: TURBOCHARGER GP
294-4585 TURBOCHARGER GP
S/N TXF1-UP
TIER III EMISSIONS, WET CENTER SECTION, EXHAUST REAR
PART OF 424-8405 ENGINE AR-COMPLETE
Type 2
S/N TXF1-UP
TIER III EMISSIONS, WET CENTER SECTION, EXHAUST REAR
PART OF 424-8405 ENGINE AR-COMPLETE
Type 2
For full view, you need register
#SEBP65440114
461-3746: TURBOCHARGER GP
For full view, you need register
Parts for your 349D L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 115-7087 M | [1] | BOLT (M6X0.04X10.4-MM) | |
| 2. | 161-6958 | [1] | CLIP-HOSE | |
| 3. | 161-6963 | [2] | CLAMP | |
| 4. | 461-3747 Y | [1] | CARTRIDGE GP-TURBOCHARGER | |
| 5. | 1W-9311 | [1] | CLAMP AS-TURBINE | |
| 5A. | 7M-9918 | [1] | LOCKNUT (1/4-28-THD) | |
| 6. | 239-5858 | [1] | CLAMP AS-COMPRESSOR | |
| 7. | 242-3360 E | HOSE (44-CM) | ||
| 8. | 258-4524 E | SLEEVE (31-CM) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP65440115
239-6581: COOLER GP-FUEL
For full view, you need register
Parts for your 349D L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 134-3196 | [4] | WASHER (10.2X39.6X2.3-MM THK) | |
| 2. | 4I-1205 | [1] | BUMPER | |
| 3. | 129-5429 | [1] | CORE AS-FUEL COOLER | |
| 4. | 141-1060 | [8] | MOUNT-ISOLATION | |
| 5. | 239-6582 | [1] | DOOR AS-ACCESS (FUEL COOLER) | |
| 5A. | 099-7857 | [2] | HINGE | |
| 6. | 239-6585 | [1] | SUPPORT AS | |
| 7. | 287-0164 | [1] | SUPPORT AS | |
| 8. | 5P-1076 | [2] | WASHER-HARD (13.5X30X4-MM THK) | |
| 9. | 7X-7729 | [5] | WASHER (11X25X3-MM THK) | |
| 10. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 11. | 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | |
| 12. | 8T-4179 M | [6] | BOLT (M12X1.75X20-MM) | |
| 13. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 14. | 8T-8915 | [4] | BOLT (3/8-16X3.25-IN) | |
| M | METRIC PART | |||
#SEBP65440116
212-9580: FILTER GP-WATER SEP & FUEL
212-9580 FILTER GP-WATER SEP & FUEL
S/N FLA1-UP
PART OF 312-2617 PUMP GP-FUEL PRM & PRIM FILTER
S/N FLA1-UP
PART OF 312-2617 PUMP GP-FUEL PRM & PRIM FILTER
For full view, you need register
Parts for your 349D L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 326-1643 | [1] | FILTER AS-WATER SEP & FUEL (PRIMARY) | |
| 1A. | 220-8678 | [1] | SEAL-RING (FUEL FILTER) | |
| 2. | 343-5527 | [1] | BOWL AS | |
| 2A. | 3J-1907 J | [1] | SEAL-O-RING | |
| 2B. | 5F-9144 | [1] | SEAL-O-RING | |
| 2C. | 8F-7219 | [1] | SEAL-O-RING | |
| 2D. | 9S-8004 J | [1] | PLUG (9/16-18-THD) | |
| J | PARTS MARKED J ARE USED WITH BOWL ASSEMBLY WHEN PLASIC PLUG IS NOT USED. | |||
#SEBP65440117
117-0183: FITTING GP-FUEL LINES
117-0183 FITTING GP-FUEL LINES
S/N TXF1-UP
7/8-14X45 DEG FLARE. NO. 10, FUEL TRANSFER PUMP INLET
PART OF 424-8405 ENGINE AR-COMPLETE
S/N TXF1-UP
7/8-14X45 DEG FLARE. NO. 10, FUEL TRANSFER PUMP INLET
PART OF 424-8405 ENGINE AR-COMPLETE
For full view, you need register
#SEBP65440118
249-0713: INJECTOR GP-FUEL
For full view, you need register
#SEBP65440119
248-1394: KIT-INJECTOR
248-1394 KIT-INJECTOR
S/N FLA1-UP
CONTAINS SEALS NEEDED TO REINSTALL ONE INJECTOR INTO THE CYLINDER
FOR USE WITH @@@@@424-8405@@@@@
FIELD INSTALLATION
S/N FLA1-UP
CONTAINS SEALS NEEDED TO REINSTALL ONE INJECTOR INTO THE CYLINDER
FOR USE WITH @@@@@424-8405@@@@@
FIELD INSTALLATION
For full view, you need register
Information:
AIR INLET AND EXHAUST SYSTEM
AIR CLEANER GP
Operation and Maintenance Manual
Special Instruction
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Specifications
Reuse And Salvage Guidelines
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Caterpillar Certified Procedure to Inspect and Clean Air Filters {1051, 1054}
Service Magazine
Instruction for Cleaning the Dust Collector Is Now Available for Certain Excavators {1051, 1054, 7452}
Instruction for Cleaning the Dust Collector Is Now Available for Certain Excavators {1051, 1054, 7452}
Instruction for Cleaning the Dust Collector Is Now Available for Certain Excavators {1051, 1054, 7452}
Caterpillar Parts SIS Catalog 349D L :
Truck sale:
267,583
