354-0045 WIRING GP-ELECTRONIC CONTROL S/N TXF1-8664 PART OF 424-8405 ENGINE AR-COMPLETE FOR USE WITH @@@@@354-0042@@@@@ 349D L

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 354-0045 WIRING GP-
1. 354-0045 WIRING GP-
2. 299-2856 WIRING GP-
3. 336-6227 WIRING GP-
4. 336-5983 WIRING GP-
5. 336-5983 WIRING GP-
6. 336-6195 WIRING GP-
7. 230-0961 WIRING GP-

POWER TRAIN

DRIVE GP-FINAL

8. 333-3036 DRIVE GP-F
9. 353-0527 DRIVE GP-F
0. INFORMATION

EXCAVATOR 349D L EXCAVATOR FLA
349D L Excavator FLA00001-UP (MACHINE) POWERED BY C13 Engine SEBP6544 349D L FLA (2014)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

251-0435 WIRING GP-CONSOLE

350-8247 WIRING GP-CONVERTER

354-0045 WIRING GP-ELECTRONIC CONTROL

299-2856 WIRING GP-FINE SWING

336-6227 WIRING GP-HAMMER

#SEBP65440220

354-0045: WIRING GP-ELECTRONIC CONTROL

WIRING GP-ELECTRONIC CONTROL

354-0045 WIRING GP-ELECTRONIC CONTROL
S/N TXF1-8664
PART OF 424-8405 ENGINE AR-COMPLETE
FOR USE WITH @@@@@354-0042@@@@@

i05397062 SEBP6544

3540045 WIRING GP-ELECTRONIC CONTROL Parts scheme

For full view, you need register

Parts for your 349D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093 C	[14]	STRAP-CABLE
2.	5P-9085	[1]	CLIP (LOOP)
3.	385-2664 CY	[1]	HARNESS AS-ENGINE
4.	132-5789	[3]	CLIP (LADDER)
5.	156-6175	[2]	CLIP (LADDER)
6.	2Y-5829 M	[2]	NUT (M10X1.5-THD)
7.	4P-7581 C	[3]	CLIP (LADDER)
8.	6V-3918 M	[1]	BOLT (M8X1.25X50-MM)
9.	6V-5839 C	[7]	WASHER (11X21X2.5-MM THK)
10.	6V-8212 CM	[5]	BOLT (M10X1.5X16-MM)
11.	6V-8836 M	[2]	BOLT (M6X1X14-MM)
12.	9X-8267	[2]	WASHER (6.6X12X2-MM THK)
13.	9M-1974	[2]	WASHER-HARD (8.8X16X2-MM THK)
14.	9X-2097 M	[1]	STUD (M8X1.25-THD)
15.	352-3970 C	[1]	CLIP (LADDER)
16.	4P-8134 C	[1]	CLIP (LADDER)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP65440221

354-0045: WIRING GP-ELECTRONIC CONTROL

WIRING GP-ELECTRONIC CONTROL

354-0045 WIRING GP-ELECTRONIC CONTROL
S/N TXF8665-UP
PART OF 424-8405 ENGINE AR-COMPLETE
FOR USE WITH @@@@@354-0042@@@@@

i07478370 SEBP6544

For full view, you need register

Parts for your 349D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093 C	[16]	STRAP-CABLE
2.	516-4037 CY	[1]	HARNESS AS-SENSOR (ENGINE)
3.	132-5789 C	[2]	CLIP (LADDER)
4.	156-6175	[2]	CLIP (LADDER)
5.	2Y-5829 M	[2]	NUT (M10X1.5-THD)
6.	352-3970	[1]	CLIP (LADDER)
7.	4P-7581 C	[4]	CLIP (LADDER)
8.	4P-8134 C	[2]	CLIP (LADDER)
9.	5P-9085	[1]	CLIP (LOOP)
10.	6V-3918 M	[1]	BOLT (M8X1.25X50-MM)
11.	6V-5839 C	[7]	WASHER (11X21X2.5-MM THK)
12.	6V-8212 CM	[6]	BOLT (M10X1.5X16-MM)
13.	6V-8836 M	[2]	BOLT (M6X1X14-MM)
14.	9M-1974	[2]	WASHER-HARD (8.8X16X2-MM THK)
15.	9X-2097 M	[1]	STUD (M8X1.25-THD)
16.	9X-8267	[2]	WASHER (6.6X12X2-MM THK)
17.	8M-9124	[1]	WASHER (10X22.5X8-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP65440222

299-2856: WIRING GP-FINE SWING

WIRING GP-FINE SWING

299-2856 WIRING GP-FINE SWING
S/N FLA1-UP
PART OF 447-3355 CHASSIS AR

i02876958 SEBP6544

2992856 WIRING GP-FINE SWING Parts scheme

For full view, you need register

Parts for your 349D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[3]	STRAP-CABLE
2.	111-4836	[1]	CLIP
3.	111-4837	[2]	CLIP
4.	238-2171	[1]	BRACKET AS
5.	299-3027	[1]	HARNESS AS-VALVE (FINE SWING)
	103-2529 E		HOSE (50-CM)
	9W-0852	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	9W-0844	[2]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS,WEDGE & INTERFACE SEAL)
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
6.	8T-4121	[3]	WASHER-HARD (11X21X2.5-MM THK)
7.	8T-4136 M	[1]	BOLT (M10X1.5X25-MM)
8.	8T-4137 M	[2]	BOLT (M10X1.5X20-MM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP65440223

336-6227: WIRING GP-HAMMER

WIRING GP-HAMMER

336-6227 WIRING GP-HAMMER -RETURN FILTER
S/N FLA1-UP
PART OF 346-4462 FILTER AR-HYDRAULIC
AN ATTACHMENT

i03703239 SEBP6544

For full view, you need register

Parts for your 349D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[3]	STRAP-CABLE
2.	7K-1181	[10]	STRAP-CABLE
3.	342-3141	[1]	HARNESS AS-WIRING (HAMMER FILTER)
	8T-8737	[1]	PLUG-SEAL
	9X-3402	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	2L-8079	[1]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	9X-3401	[1]	PIN-CONNECTOR (16-GA TO 18-GA)
	230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
	264-7029	[1]	SEAL-CONNECTOR
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
4.	4P-7582	[1]	CLIP (LADDER)

#SEBP65440224

336-5983: WIRING GP-PLATFORM

WIRING GP-PLATFORM

336-5983 WIRING GP-PLATFORM
S/N FLA1-UP
PART OF 342-3618 OPERATOR AR
Type 1

i03680345 SEBP6544

For full view, you need register

Parts for your 349D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1S-2342	[1]	STRAP AS-GROUND
2.	3E-5169	[1]	GUARD-SWITCH (SECONDARY SHUTDOWN)
3.	3S-2093	[2]	STRAP-CABLE
4.	7K-1181	[11]	STRAP-CABLE
5.	111-4837	[5]	CLIP
6.	111-4838	[2]	CLIP
7.	111-4839	[2]	STRAP
8.	116-0118	[11]	CLIP
9.	234-1122	[1]	COVER
10.	251-0299	[1]	HARNESS AS-SWITCH (SECONDARY SHUTDOWN)
	2L-8074	[2]	TERMINAL-RING (14-GA TO 16-GA, NO. 6 SCREW)
	9X-3401	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
11.	336-5967	[1]	HARNESS AS-PLATFORM
	102-8802	[4]	KIT-RECEPTACLE (2-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[13]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[26]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[21]	STRAP-CABLE
	8N-1546	[1]	PIN-CONNECTOR (6-GA)
	8T-8737	[47]	PLUG-SEAL
	102-7964	[1]	PLUG-CONNECTOR (16-PIN)
	102-7965	[16]	TERMINAL (FEMALE)
	9W-0852	[9]	PIN-CONNECTOR (14-GA TO 16-GA)
	9W-0844	[41]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	116-0255	[1]	TERMINAL-BLADE (10-GA TO 20-GA)
	119-3662 BE		TUBE-HEAT SHRINK (10.85-MM DIA)
	121-1039	[1]	TERMINAL (MALE)
	121-1168	[2]	CONNECTOR-RECEPTACLE
	121-1173	[34]	TERMINAL (MALE)
	125-4766	[1]	PLUG-CONNECTOR (17-PIN)
	125-4841	[1]	WEDGE-PLUG LOCK (21-PIN)
	125-7874 BE		TUBE-HEAT SHRINK (5.72-MM DIA)
	125-7875 BE		TUBE-HEAT SHRINK (7.44-MM DIA)
	9X-3402	[55]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[55]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	127-5484	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
	2L-8050	[1]	TERMINAL-RING (6-GA, 1/4-IN SCREW)
			-OR-
	2L-8058	[1]	TERMINAL-RING (8-GA, 1/4-IN SCREW)
	2L-8052	[2]	TERMINAL-RING (6-GA, 3/8-IN SCREW)
			-OR-
	2L-8060	[2]	TERMINAL-RING (8-GA, 3/8-IN SCREW)
	2L-8069	[2]	TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)
	134-3296	[1]	HOUSING-PLUG
	134-3297	[2]	SEAL
	9X-3401	[25]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[25]	PIN-CONNECTOR (14-GA TO 16-GA)
	153-2620	[1]	PLUG AS-CONNECTOR (54-PIN, BLACK)
	163-6759	[1]	SEAL
	155-2270	[6]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	197-4385	[2]	DIODE
	230-4009	[3]	PLUG AS-CONNECTOR (12-PIN)
			(EACH INCLUDES)
	264-7034	[1]	SEAL-CONNECTOR
	230-4011	[3]	PLUG AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	264-7029	[1]	SEAL-CONNECTOR
	230-5010	[3]	PLUG AS-CONNECTOR (6-PIN)
			(EACH INCLUDES)
	264-7032	[1]	SEAL-CONNECTOR
	238-2363	[10]	TERMINAL (FEMALE)
	238-2366	[7]	TERMINAL (MALE)
	239-7352	[1]	PLUG AS-CONNECTOR (6-PIN)
	264-7032	[1]	SEAL-CONNECTOR
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
	243-4507	[1]	RECEPTACLE AS-CONNECTOR (4-PIN)
	243-4508	[4]	RECEPTACLE AS-CONNECTOR (6-PIN)
	243-4509	[1]	RECEPTACLE AS-CONNECTOR (8-PIN)
	243-4510	[2]	RECEPTACLE AS-CONNECTOR (12-PIN)
	247-2693	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)
12.	096-6166	[2]	WASHER-HARD (4.5X9X1-MM THK)
13.	4D-1836	[1]	SWITCH-TOGGLE (SECONDARY SHUTDOWN)
14.	7X-2621 M	[6]	BOLT (M10X1.5X12-MM)
15.	8T-0337 M	[2]	SCREW-MACHINE (M4X0.7X12-MM)
16.	8T-4121	[14]	WASHER-HARD (11X21X2.5-MM THK)
17.	8T-4137 M	[8]	BOLT (M10X1.5X20-MM)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP65440225

336-5983: WIRING GP-PLATFORM

WIRING GP-PLATFORM

336-5983 WIRING GP-PLATFORM
S/N FLA1-UP
PART OF 342-3618 OPERATOR AR
Type 2

i06121561 SEBP6544

For full view, you need register

Parts for your 349D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1S-2342	[1]	STRAP AS-GROUND
2.	3E-5169	[1]	GUARD-SWITCH (SECONDARY SHUTDOWN)
3.	3S-2093	[3]	STRAP-CABLE
4.	7K-1181 C	[13]	STRAP-CABLE
5.	111-4837	[5]	CLIP
6.	111-4838	[2]	CLIP
7.	111-4839	[2]	STRAP
8.	116-0118	[11]	CLIP
9.	234-1122	[1]	COVER
10.	251-0299	[1]	HARNESS AS-SWITCH (SECONDARY SHUTDOWN)
	2L-8074	[2]	TERMINAL-RING (14-GA TO 16-GA, NO. 6 SCREW)
	9X-3401	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
11.	467-7448 C	[1]	HARNESS AS-PLATFORM
	102-8802	[4]	KIT-RECEPTACLE (2-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[13]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[27]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[24]	STRAP-CABLE
	8N-1546	[1]	PIN-CONNECTOR (6-GA)
	8T-8737	[26]	PLUG-SEAL
	102-7964	[1]	PLUG-CONNECTOR (16-PIN)
	102-7965	[17]	TERMINAL (FEMALE)
	9W-0852	[9]	PIN-CONNECTOR (14-GA TO 16-GA)
	9W-0844	[41]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	116-0255	[1]	TERMINAL-BLADE (10-GA TO 20-GA)
	119-3662 BE		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	121-1039	[1]	TERMINAL (MALE)
	121-1168	[2]	CONNECTOR-RECEPTACLE
	121-1173	[34]	TERMINAL (MALE)
	125-4766	[1]	PLUG-CONNECTOR (17-PIN)
	125-4841	[1]	WEDGE-PLUG LOCK (21-PIN)
	125-7874 BE		TUBE-HEAT SHRINK (5.72-MM DIA)(25-CM)
	125-7875 BE		TUBE-HEAT SHRINK (7.44-MM DIA)(30-CM)
	9X-3402	[55]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[55]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	127-5484	[1]	RECEPTACLE AS-CONNECTOR (1-PIN)
	2L-8050	[1]	TERMINAL-RING (6-GA, 1/4-IN SCREW)
			-OR-
	2L-8058	[1]	TERMINAL-RING (8-GA, 1/4-IN SCREW)
	2L-8052	[2]	TERMINAL-RING (6-GA, 3/8-IN SCREW)
			-OR-
	2L-8060	[2]	TERMINAL-RING (8-GA, 3/8-IN SCREW)
	2L-8069	[2]	TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)
	134-3296	[1]	HOUSING-PLUG
	134-3297	[2]	SEAL
	9X-3401	[25]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[25]	PIN-CONNECTOR (14-GA TO 16-GA)
	153-2620	[1]	PLUG AS-CONNECTOR (54-PIN, BLACK)
	163-6759	[1]	SEAL
	155-2270	[6]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	197-4385	[2]	DIODE
	230-4009	[3]	PLUG AS-CONNECTOR (12-PIN)
			(EACH INCLUDES)
	264-7034	[1]	SEAL-CONNECTOR
	230-4011	[3]	PLUG AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	264-7029	[1]	SEAL-CONNECTOR
	230-5010	[3]	PLUG AS-CONNECTOR (6-PIN)
			(EACH INCLUDES)
	264-7032	[1]	SEAL-CONNECTOR
	238-2363	[10]	TERMINAL (FEMALE)
	238-2366	[7]	TERMINAL (MALE)
	239-7352	[1]	PLUG AS-CONNECTOR (6-PIN)
	264-7032	[1]	SEAL-CONNECTOR
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
	243-4507	[1]	RECEPTACLE AS-CONNECTOR (4-PIN)
	243-4508	[2]	RECEPTACLE AS-CONNECTOR (6-PIN)
	243-4509	[1]	RECEPTACLE AS-CONNECTOR (8-PIN)
	243-4510	[2]	RECEPTACLE AS-CONNECTOR (12-PIN)
	342-2972	[1]	CAP-CONNECTOR (2-PIN)
	342-2974	[3]	CAP-CONNECTOR (6-PIN)
12.	096-6166	[2]	WASHER-HARD (4.5X9X1-MM THK)
13.	4D-1836	[1]	SWITCH-TOGGLE (SECONDARY SHUTDOWN)
14.	7X-2621 M	[6]	BOLT (M10X1.5X12-MM)
15.	8T-0337 M	[2]	SCREW-MACHINE (M4X0.7X12-MM)
16.	8T-4121	[14]	WASHER-HARD (11X21X2.5-MM THK)
17.	8T-4137 M	[8]	BOLT (M10X1.5X20-MM)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP65440226

336-6195: WIRING GP-QUICK COUPLER

WIRING GP-QUICK COUPLER

336-6195 WIRING GP-QUICK COUPLER
S/N FLA1-UP
PART OF 344-4126 CONTROL AR-QUICK COUPLER
AN ATTACHMENT

i03676325 SEBP6544

3366195 WIRING GP-QUICK COUPLER Parts scheme

For full view, you need register

Parts for your 349D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[6]	STRAP-CABLE
2.	7I-2673	[1]	STRAP-CABLE
3.	7K-1181	[20]	STRAP-CABLE
4.	342-3138	[1]	HARNESS AS-QUICK COUPLER
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[4]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9W-0852	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	9W-0844	[2]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	125-7874 BE		TUBE-HEAT SHRINK (5.72-MM DIA)
	2L-8079	[1]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	155-2270	[3]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	243-4507	[1]	RECEPTACLE AS-CONNECTOR (4-PIN)
5.	4P-7428	[1]	CLIP (LADDER)
6.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
7.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP65440227

230-0961: WIRING GP-UNIT INJECTOR

WIRING GP-UNIT INJECTOR

230-0961 WIRING GP-UNIT INJECTOR
S/N TXF1-UP
PART OF 356-2433 ENGINE AR-CORE

i02229274 SEBP6544

2300961 WIRING GP-UNIT INJECTOR Parts scheme

For full view, you need register

Parts for your 349D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7E-6508	[6]	CAP AS
2.	418-7614 Y	[1]	HARNESS AS-WIRING (UNIT INJECTOR)
3.	6V-8837 M	[5]	BOLT (M6X1X16-MM)
4.	6V-8836 M	[2]	BOLT (M6X1X14-MM)
5.	9X-8267	[2]	WASHER (6.6X12X2-MM THK)
6.	237-9960	[5]	CLIP (LADDER)
7.	3S-2093	[5]	STRAP-CABLE
8.	5P-0537	[5]	WASHER-HARD (7.2X14.5X2-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP65440228

333-3036: DRIVE GP-FINAL

DRIVE GP-FINAL

333-3036 DRIVE GP-FINAL -WITHOUT MOTOR
S/N FLA1-UP
PART OF 353-0528 DRIVE GP-FINAL
FIELD REPLACEMENT ORDER @@@@@521-3847@@@@@, @@@@@521-3848@@@@@

i04316228 SEBP6544

For full view, you need register

Parts for your 349D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2R-0524	[2]	CONE-BEARING
2.	2R-0525	[2]	CUP-BEARING
3.	3E-2338	[2]	PLUG-PIPE
4.	4I-7576	[14]	WASHER (66.3X104X3-MM THK)
5.	7Y-0661	[3]	SHAFT-PLANETARY
6.	7Y-0662	[4]	SHAFT-PLANETARY
7.	199-4583	[11]	BEARING AS
8.	7Y-0808 B	[1]	SHIM (1.6-MM THK)
9.	7Y-1469	[1]	COUPLING
10.	7Y-1470	[1]	GEAR-SUN (21-TEETH)
11.	7Y-1472 B	[1]	SHIM (0.15-MM THK)
	7Y-1473 B	[1]	SHIM (0.3-MM THK)
	7Y-1474 B	[1]	SHIM (0.4-MM THK)
	7Y-1475 B	[1]	SHIM (0.5-MM THK)
	7Y-1476 B	[1]	SHIM (0.6-MM THK)
	7Y-1477 B	[1]	SHIM (0.7-MM THK)
	7Y-1478 B	[1]	SHIM (0.8-MM THK)
	7Y-1479 B	[1]	SHIM (1-MM THK)
	7Y-1480 B	[1]	SHIM (1.6-MM THK)
20.	7Y-1482	[1]	CARRIER-PLANETARY
21.	7Y-1483	[1]	GEAR-RING (63-TEETH)
22.	7Y-1485	[1]	CARRIER-PLANETARY
23.	7Y-1487	[1]	GEAR-RING (85-TEETH)
24.	7Y-1488	[1]	CARRIER AS
	7Y-0656	[3]	SHAFT-PLANETARY
25.	7Y-1491	[1]	GEAR-SUN (21-TEETH)
26.	7Y-1493	[1]	SPACER (8.7X50X14-MM THK)
27.	7Y-1495	[3]	GEAR-PLANETARY (29-TEETH)
28.	7Y-1498	[1]	COVER
29.	7Y-1499	[3]	GEAR-PLANETARY (20-TEETH)
30.	7Y-1504	[4]	GEAR-PLANETARY (20-TEETH)
31.	454-6929 M	[20]	BOLT (M24X3X190-MM)
32.	110-7217	[2]	RING-RETAINING
33.	114-1541	[6]	PIN-DOWEL
34.	169-5559	[1]	GEAR-SUN (26-TEETH)
35.	199-4719	[1]	GEAR-COUPLING
36.	227-6048	[12]	WASHER (26X40X4-MM THK)
37.	255-2272	[1]	SEAL GP-DUO-CONE
38.	333-3033	[1]	HOUSING-MOTOR
39.	333-3034	[1]	HOUSING-GEAR
40.	333-3035	[1]	PLATE
41.	094-0584	[6]	WASHER (40.3X72X1-MM THK)
42.	199-4582	[3]	BEARING AS
43.	095-0891	[7]	PIN-SPRING
44.	096-3216 M	[2]	SETSCREW-SOCKET (M12X1.75X12-MM)
45.	4S-5924	[1]	SEAL-O-RING
46.	6V-8133 M	[12]	BOLT (M24X3X80-MM)
47.	6V-8200 M	[20]	BOLT-SOCKET HEAD (M12X1.75X35-MM)
48.	7M-8485	[2]	SEAL-O-RING
49.	7Y-1484	[1]	SPACER (191X221X8.5-MM THK)
50.	7Y-1492	[2]	SPACER (67X101.1X10-MM THK)
51.	8C-5240	[1]	SEAL-O-RING
52.	8T-3957 M	[10]	BOLT-SOCKET HEAD (M12X1.75X30-MM)
53.	451-2177	[20]	WASHER-HARD (26X44X4-MM THK)
54.	451-2182	[20]	WASHER-HARD (13.5X25.5X3-MM THK)
55.	8T-4240	[3]	RING-RETAINING

	1U-8846 BF		SEALANT-GASKET
	B		USE AS REQUIRED
	F		NOT SHOWN
	M		METRIC PART

#SEBP65440229

353-0527: DRIVE GP-FINAL

DRIVE GP-FINAL

353-0527 DRIVE GP-FINAL -WITH MOTOR, SPROCKET
S/N FLA1-UP
PART OF 227-6042 POWER TRAIN AR

i04269576 SEBP6544

For full view, you need register

Parts for your 349D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	115-6399 Y	[1]	SPROCKET GP (NON-SEGMENTED)
2.	353-0528 Y	[1]	DRIVE GP-FINAL
	Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Operation and Maintenance Manual

Battery Disconnect Switch
345D, 349D and 349D2 Excavators

Battery or Battery Cable - Inspect/Replace
345D, 349D and 349D2 Excavators

Battery - Recycle
345D, 349D and 349D2 Excavators

SmartBoom Operation - If Equipped
345D, 349D and 349D2 Excavators

SmartBoom Control - If Equipped
345D, 349D and 349D2 Excavators

Power Receptacle - If Equipped
345D, 349D and 349D2 Excavators

Camera Harness - Disconnect and Connect
345D, 349D and 349D2 Excavators

Fuses - Replace
345D, 349D and 349D2 Excavators

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Installation of the 299-2598 Chassis Wiring Gp on Certain Hydraulic Excavators{1408, 7553}
Installation of the 299-2598 Chassis Wiring Gp on Certain Hydraulic Excavators{1408, 7553}

Specifications

Electronic Unit Injector Wiring
C11 and C13 Engines

Tool Operating Manual

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Systems Operation

Relays
345D, 349D and 349D2 Excavators Tool Control System

Senders
345D, 349D and 349D2 Excavators Tool Control System

Sensors
345D, 349D and 349D2 Excavators Tool Control System

Switches
345D, 349D and 349D2 Excavators Tool Control System

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Cat Machines

Sensors
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Switches
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Testing and Adjusting

Electric Starting System - Test
C11 and C13 Engines for Caterpillar Built Machines

Wiring Harness (Open Circuit) - Test
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Wiring Harness (Short Circuit) - Test
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Overload Warning - Set - If Equipped
345D, 349D and 349D2 Excavators Hydraulic System

System Schematic
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Electrical Connector - Inspect
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Troubleshooting

CID 0291 FMI 05 Engine Cooling Fan Solenoid open circuit
C11 and C13 Engines for Caterpillar Built Machines

CID 0291 FMI 06 Engine Cooling Fan Solenoid short to ground
C11 and C13 Engines for Caterpillar Built Machines

Electrical Connectors - Inspect
C11 and C13 Engines for Caterpillar Built Machines

CID 0091 FMI 08 Throttle Position signal abnormal
C11 and C13 Engines for Caterpillar Built Machines

CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C11 and C13 Engines for Caterpillar Built Machines

CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0274 FMI 04 Atmospheric Pressure short to ground
C11 and C13 Engines for Caterpillar Built Machines

Fuel Filter Differential Pressure Switch Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0100 FMI 04 Engine Oil Pressure short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0110 FMI 04 Engine Coolant Temperature short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 0174 FMI 03 Fuel Temperature open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0174 FMI 04 Fuel Temperature short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 2417 FMI 05 Ether Injection Control Solenoid current low
C11 and C13 Engines for Caterpillar Built Machines

CID 2417 FMI 06 Ether Injection Control Solenoid current high
C11 and C13 Engines for Caterpillar Built Machines

Sensors and Electrical Connectors
C11 and C13 Engines for Caterpillar Built Machines

Engine Fan Control Solenoid Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

Throttle Switch Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

MID 039 - CID 0096 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
C11 and C13 Engines for Caterpillar Built Machines

Low Engine Oil Pressure Lamp Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high
C11 and C13 Engines for Caterpillar Built Machines

CID 0190 FMI 08 Engine Speed signal abnormal
C11 and C13 Engines for Caterpillar Built Machines

MID 039 - CID 0096 - FMI 05
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0110 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0110 - FMI 09
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0586 - FMI 05
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0586 - FMI 12
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 03
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 08
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2280 - FMI 03
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Electrical Component and Connector Locations
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0588 - FMI 12
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0588 - FMI 09
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0600 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Service Magazine

The Correct Orientation of the Atmospheric Sensor Must Be Maintained on Certain Tier 3 Machine Engines {1923}
The Correct Orientation of the Atmospheric Sensor Must Be Maintained on Certain Tier 3 Machine Engines {1923}

Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>®</SUP> Product {1463}
2014/03/04

A New Antenna Assembly is Now Available for the ROPS on Certain Excavators and Mobile Hydraulic Power Units {1408, 7301}
2014/11/19

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}