ELECTRICAL AND STARTING SYSTEM
SENSOR GPELECTRICAL AND STARTING SYSTEM
SENSOR GP
#SEBP65450500
385-1300: SENSOR & MTG GP-SOOT
385-1300 SENSOR & MTG GP-SOOT
S/N BZ21-UP; HPD1-UP
PART OF 385-1297 INSTALLATION AR-CEM
S/N BZ21-UP; HPD1-UP
PART OF 385-1297 INSTALLATION AR-CEM
For full view, you need register
Parts for your 349F L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [2] | STRAP-CABLE | |
| 2. | 7K-1181 | [1] | STRAP-CABLE | |
| 3. | 096-2916 | [1] | GROMMET | |
| 4. | 326-4516 | [12] | TIE-CABLE | |
| 5. | 441-5127 | [1] | SENSOR AS-NITROGEN OXIDE (ENGINE OUTPUT) | |
| 6. | 441-5128 | [1] | SENSOR AS-NITROGEN OXIDE (EXHAUST PIPE OUT) | |
| 7. | 393-4008 | [1] | PLATE AS | |
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 8. | 396-6211 | [1] | GROMMET | |
| 9. | 418-0728 | [1] | PLATE AS | |
| 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 10. | 101-3625 | [4] | CLIP (LADDER) | |
| 11. | 285-6393 | [7] | CLIP | |
| 12. | 5C-9553 M | [2] | BOLT (M6X1X16-MM) | |
| 13. | 8T-4121 | [15] | WASHER-HARD (11X21X2.5-MM THK) | |
| 14. | 8T-4136 M | [9] | BOLT (M10X1.5X25-MM) | |
| 15. | 8T-4137 M | [6] | BOLT (M10X1.5X20-MM) | |
| 16. | 8T-4138 M | [2] | BOLT (M6X1X20-MM) | |
| 17. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
#SEBP65450501
345-3846: SENSOR GP-ENGINE
345-3846 SENSOR GP-ENGINE
S/N T4F1-154
PART OF 380-0900 ENGINE AR-CORE
FOR USE WITH NRS MIXER ELBOW GP-AIR ORIENTED IN THE DOWNWARD POSITION AND MTG GP-CONT (NRS)
CANNOT BE USED WITH LINES GP-COMPRESSOR
S/N T4F1-154
PART OF 380-0900 ENGINE AR-CORE
FOR USE WITH NRS MIXER ELBOW GP-AIR ORIENTED IN THE DOWNWARD POSITION AND MTG GP-CONT (NRS)
CANNOT BE USED WITH LINES GP-COMPRESSOR
For full view, you need register
Parts for your 349F L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [5] | STRAP-CABLE | |
| 2. | 178-1781 | [1] | CLIP | |
| 3. | 234-5012 Y | [1] | SENSOR GP-TEMPERATURE (COOLANT) | |
| 4. | 234-5013 Y | [1] | SENSOR GP-TEMPERATURE (OUTLET AIR) | |
| 5. | 286-1238 | [1] | BRACKET | |
| 6. | 293-5535 Y | [1] | SENSOR GP-PRESSURE (ENGINE OIL) | |
| 7. | 294-6119 | [1] | SENSOR GP-PRESSURE (CRANKCASE BREATHER) | |
| 8. | 384-1836 Y | [1] | SENSOR GP-SPEED (PRIMARY, TIMING) | |
| 9. | 300-9806 Y | [1] | SENSOR GP-SPEED (SECONDARY, TIMING) | |
| 10. | 330-9740 | [1] | ADAPTER AS | |
| 214-7566 | [1] | SEAL-O-RING | ||
| 330-9739 | [1] | ADAPTER | ||
| 11. | 331-1134 Y | [1] | SENSOR GP-PRESSURE (ATMOSPHERIC) | |
| 12. | 331-1135 Y | [1] | SENSOR GP-PRESSURE (INTAKE AIR MANIFOLD) | |
| 13. | 443-4151 C | [1] | BRACKET | |
| 14. | 332-0296 Y | [1] | SENSOR GP-PRESSURE (NRS ABSOLUTE) | |
| 15. | 474-3231 | [1] | SENSOR AS-TEMPERATURE (NOX REDUCTION SYSTEM) | |
| 281-8802 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 16. | 385-1173 CY | [1] | SENSOR GP-PRESSURE (NOX REDUCTION SYSTEM) | |
| 17. | 109-1393 M | [4] | BOLT-SOCKET HEAD (M4X0.7X10-MM) | |
| 18. | 137-8101 | [2] | SEAL-O-RING | |
| 20. | 183-3407 | [1] | PLUG AS | |
| 9S-8004 | [1] | PLUG (9/16-18-THD) | ||
| 214-7568 | [1] | SEAL-O-RING | ||
| 21. | 2Y-5829 M | [1] | NUT (M10X1.5-THD) | |
| 22. | 285-6395 | [1] | CLIP (LADDER) | |
| 23. | 6V-5215 M | [2] | BOLT (M8X1.25X16-MM) | |
| 25. | 6V-3940 CM | [3] | BOLT (M8X1.25X25-MM) | |
| 26. | 8T-4970 M | [1] | BOLT (M6X1X14-MM) | |
| 27. | 9M-1974 C | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 28. | 307-2673 | [1] | PLUG AS | |
| 9S-8005 | [1] | PLUG (3/4-16-THD) | ||
| 238-5080 | [1] | SEAL-O-RING | ||
| 29. | 9X-6165 | [1] | WASHER (6.5X22X2.5-MM THK) | |
| 30. | 7W-9094 C | [1] | SPACER (11X20X9-MM THK) | |
| 31. | 421-8565 C | [1] | BRACKET | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP65450502
418-9617: SENSOR GP-ENGINE
For full view, you need register
Parts for your 349F L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 C | [5] | STRAP-CABLE | |
| 2. | 178-1781 | [1] | CLIP | |
| 3. | 234-5012 Y | [1] | SENSOR GP-TEMPERATURE (COOLANT) | |
| 4. | 234-5013 Y | [1] | SENSOR GP-TEMPERATURE (CHARGE AIR) | |
| 5. | 293-5535 Y | [1] | SENSOR GP-PRESSURE (ENGINE OIL) | |
| 6. | 300-9806 Y | [1] | SENSOR GP-SPEED (ENGINE SPEED) | |
| 7. | 330-9740 | [1] | ADAPTER AS | |
| 214-7566 | [1] | SEAL-O-RING | ||
| 330-9739 | [1] | ADAPTER | ||
| 8. | 331-1134 Y | [1] | SENSOR GP-PRESSURE (ATMOSPHERIC) | |
| 9. | 331-1135 Y | [1] | SENSOR GP-PRESSURE (INTAKE MANIFOLD) | |
| 10. | 332-0296 Y | [1] | SENSOR GP-PRESSURE (NRS) | |
| 11. | 474-3231 | [1] | SENSOR AS-TEMPERATURE (NOX REDUCTION SYSTEM) | |
| 281-8802 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 12. | 443-4151 | [1] | BRACKET | |
| 13. | 384-1836 Y | [1] | SENSOR GP-SPEED (CRANKSHAFT) | |
| 14. | 385-1173 CY | [1] | SENSOR GP-PRESSURE (NRS DIFFERENTIAL) | |
| 15. | 421-8565 C | [1] | BRACKET | |
| 16. | 7W-9094 | [1] | SPACER (11X20X9-MM THK) | |
| 17. | 183-3407 | [1] | PLUG AS | |
| 9S-8004 | [1] | PLUG (9/16-18-THD) | ||
| 214-7568 | [1] | SEAL-O-RING | ||
| 18. | 285-6395 | [1] | CLIP (LADDER) | |
| 19. | 2Y-5829 M | [1] | NUT (M10X1.5-THD) | |
| 20. | 307-2673 | [1] | PLUG AS | |
| 9S-8005 | [1] | PLUG (3/4-16-THD) | ||
| 238-5080 | [1] | SEAL-O-RING | ||
| 21. | 6V-3940 CM | [3] | BOLT (M8X1.25X25-MM) | |
| 22. | 6V-5215 M | [2] | BOLT (M8X1.25X16-MM) | |
| 23. | 8T-4970 M | [1] | BOLT (M6X1X14-MM) | |
| 24. | 9M-1974 C | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 25. | 9X-6165 | [1] | WASHER (6.5X22X2.5-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP65450503
423-6434: SENSOR GP-LIQUID LEVEL
423-6434 SENSOR GP-LIQUID LEVEL
S/N BZ21-UP; HPD1-UP
PART OF 391-4823 LINES GP-FUEL
S/N BZ21-UP; HPD1-UP
PART OF 391-4823 LINES GP-FUEL
For full view, you need register
Parts for your 349F L EXCAVATOR:
CATERPILLAR SIS#SEBP65450504
344-4514: SENSOR GP-MACHINE LEVEL
344-4514 SENSOR GP-MACHINE LEVEL
S/N HPD1-UP
PART OF 565-5584 DISTRIBUTION AR
S/N HPD1-UP
PART OF 565-5584 DISTRIBUTION AR
For full view, you need register
Parts for your 349F L EXCAVATOR:
CATERPILLAR SIS#SEBP65450505
345-1948: SENSOR GP-POSITION
345-1948 SENSOR GP-POSITION
S/N BZ21-UP; HPD1-UP
PART OF 327-7477, 327-7478 SENSOR & MTG GP-POSITION
S/N BZ21-UP; HPD1-UP
PART OF 327-7477, 327-7478 SENSOR & MTG GP-POSITION
For full view, you need register
Parts for your 349F L EXCAVATOR:
CATERPILLAR SIS#SEBP65450506
293-5535: SENSOR GP-PRESSURE
293-5535 SENSOR GP-PRESSURE
S/N T4F1-UP
PART OF 345-3846, 418-9617 SENSOR GP-ENGINE
S/N T4F1-UP
PART OF 345-3846, 418-9617 SENSOR GP-ENGINE
For full view, you need register
#SEBP65450507
325-7472: SENSOR GP-PRESSURE
For full view, you need register
Parts for your 349F L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 320-3061 | [1] | SENSOR GP-PRESSURE | |
| 2. | 327-5221 | [1] | HARNESS AS-SENSOR | |
| 9X-1813 E | SLEEVE (23-CM) | |||
| 180-9339 | [3] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| 180-9340 | [3] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 281-8804 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 3. | 108-1304 E | TUBE-HEAT SHRINK (33-MM DIA)(4-CM) | ||
| E | ORDER BY THE CENTIMETER | |||
#SEBP65450508
325-8634: SENSOR GP-PRESSURE
For full view, you need register
Parts for your 349F L EXCAVATOR:
CATERPILLAR SIS#SEBP65450509
331-1134: SENSOR GP-PRESSURE
331-1134 SENSOR GP-PRESSURE
S/N T4F1-UP
ATMOSPHERIC
PART OF 345-3846, 418-9617 SENSOR GP-ENGINE
S/N T4F1-UP
ATMOSPHERIC
PART OF 345-3846, 418-9617 SENSOR GP-ENGINE
For full view, you need register
Parts for your 349F L EXCAVATOR:
CATERPILLAR SISInformation:
ELECTRICAL AND STARTING SYSTEM
SENSOR GP
Special Instruction
Installation Procedure for the 354-4378 Pressure Sensor Group {1439, 5051}
Installation Procedure for the 354-4378 Pressure Sensor Group {1439, 5051}
Installation Procedure for the 354-4378 Pressure Sensor Group {1439, 5051}
Instructions for Installing Rotary Position Sensor for Cat<SUP>®</SUP> Grade Control on Certain Series E and Series F Excavators {5736, 7220}
Instructions for Installing Rotary Position Sensor for Cat® Grade Control on Certain Series E and Series F Excavators {5736, 7220}
Instructions for Installing Rotary Position Sensor for Cat® Grade Control on Certain Series E and Series F Excavators {5736, 7220}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
NOx Sensors Handling and Installation Procedures {191N}
NOx Sensors Handling and Installation Procedures {191N}
NOx Sensors Handling and Installation Procedures {191N}
Machine Guidance Upgrades For Cat<SUP>®</SUP> Grade Control Hydraulic Excavators {7220}
Machine Guidance Upgrades For Cat® Grade Control Hydraulic Excavators {7220}
Machine Guidance Upgrades For Cat® Grade Control Hydraulic Excavators {7220}
Installation Procedure for the <NOBR>451-6711</NOBR> Hydraulic Option Ar (Tool Control with Medium Pressure) on Certain Hydraulic Excavators {1408, 1439, 1916, 1917, 1923, 1924, 5051, 5057, 5059, 5070, 5073, 5705, 7301, 7405, 7557}
Installation Procedure for the451-6711 Hydraulic Option Ar (Tool Control with Medium Pressure) on Certain Hydraulic Excavators {1408, 1439, 1916, 1917, 1923, 1924, 5051, 5057, 5059, 5070, 5073, 5705, 7301, 7405, 7557}
Installation Procedure for the
Installation Procedure for the <NOBR>451-6709</NOBR> Auxiliary Control Ar (Medium Pressure) on Certain Hydraulic Excavators {1408, 1439, 1916, 1917, 1923, 1924, 5051, 5057, 5059, 5070, 5073, 5705, 7301, 7405, 7557}
Installation Procedure for the451-6709 Auxiliary Control Ar (Medium Pressure) on Certain Hydraulic Excavators {1408, 1439, 1916, 1917, 1923, 1924, 5051, 5057, 5059, 5070, 5073, 5705, 7301, 7405, 7557}
Installation Procedure for the
Troubleshooting Guide for the Rotary Position Sensor for Cat<SUP>®</SUP> Grade Control on Certain Series E and Series F Excavators {5736}
Troubleshooting Guide for the Rotary Position Sensor for Cat® Grade Control on Certain Series E and Series F Excavators {5736}
Troubleshooting Guide for the Rotary Position Sensor for Cat® Grade Control on Certain Series E and Series F Excavators {5736}
Installation, Measurement, and Calibration of the Cat<SUP>®</SUP> Grade Control System on E-Series and F-Series Hydraulic Excavators {5736, 7220}
Installation, Measurement, and Calibration of the Cat® Grade Control System on E-Series and F-Series Hydraulic Excavators {5736, 7220}
Installation, Measurement, and Calibration of the Cat® Grade Control System on E-Series and F-Series Hydraulic Excavators {5736, 7220}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PRESSURE SENSOR FOR THE QUICK COUPLER ON CERTAIN 349F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PRESSURE SENSOR FOR THE QUICK COUPLER ON CERTAIN 349F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PRESSURE SENSOR FOR THE QUICK COUPLER ON CERTAIN 349F EXCAVATORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
The Rotary Position Sensor is Off-Center on Certain E series and F series Excavators{0766, 5736}
The Rotary Position Sensor is Off-Center on Certain E series and F series Excavators{0766, 5736}
The Rotary Position Sensor is Off-Center on Certain E series and F series Excavators{0766, 5736}
Failure of Rotary Position Sensors on Certain Caterpillar Machines {1913, 5736, 5737}
Failure of Rotary Position Sensors on Certain Caterpillar Machines {1913, 5736, 5737}
Failure of Rotary Position Sensors on Certain Caterpillar Machines {1913, 5736, 5737}
Pressure Sensor Group May Fail on Certain Excavators {1439, 1916, 1917, 1923, 1924}
Pressure Sensor Group May Fail on Certain Excavators {1439, 1916, 1917, 1923, 1924}
Pressure Sensor Group May Fail on Certain Excavators {1439, 1916, 1917, 1923, 1924}
Primary Engine Speed Sensor Malfunctioning, Shorted, Open Circuit {1907, 1912}
Primary Engine Speed Sensor Malfunctioning, Shorted, Open Circuit {1907, 1912}
Primary Engine Speed Sensor Malfunctioning, Shorted, Open Circuit {1907, 1912}
Specifications
Position Sensor and Mounting - Body Tilt Sensor
349F and 352F Excavators Machine System Specifications
349F and 352F Excavators Machine System Specifications
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PRESSURE SENSOR FOR THE QUICK COUPLER ON CERTAIN 349F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PRESSURE SENSOR FOR THE QUICK COUPLER ON CERTAIN 349F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PRESSURE SENSOR FOR THE QUICK COUPLER ON CERTAIN 349F EXCAVATORS
Service Letter-Asia
Systems Operation
Sensors
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System
Reuse And Salvage Guidelines
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PRESSURE SENSOR FOR THE QUICK COUPLER ON CERTAIN 349F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PRESSURE SENSOR FOR THE QUICK COUPLER ON CERTAIN 349F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PRESSURE SENSOR FOR THE QUICK COUPLER ON CERTAIN 349F EXCAVATORS
Troubleshooting
Disassembly and Assembly
Temperature Sensor (Cooled Exhaust Gas) - Remove and Install
C13 Engine for Caterpillar Built Machines
C13 Engine for Caterpillar Built Machines
Temperature Sensor (DPF Inlet, Flame Detect) - Remove and Install
C13 Engine for Caterpillar Built Machines
C13 Engine for Caterpillar Built Machines
Service Magazine
New NOx Sensors Are Used on Certain Tier 4 Final Machine Engines {108F, 1335}
New NOx Sensors Are Used on Certain Tier 4 Final Machine Engines {108F, 1335}
New NOx Sensors Are Used on Certain Tier 4 Final Machine Engines {108F, 1335}
Improvements Have Been Made to the Temperature Sensors for Certain C9 through C32 Machine Engines {7400, 7400}
Improvements Have Been Made to the Temperature Sensors for Certain C9 through C32 Machine Engines {7400, 7400}
Improvements Have Been Made to the Temperature Sensors for Certain C9 through C32 Machine Engines {7400, 7400}
An Improved Pilot Pressure Sensor is Now Used on Certain Excavators and Mobile Hydraulic Power Units {1439}
An Improved Pilot Pressure Sensor is Now Used on Certain Excavators and Mobile Hydraulic Power Units {1439}
An Improved Pilot Pressure Sensor is Now Used on Certain Excavators and Mobile Hydraulic Power Units {1439}
