481-5331 WIRING GP-MEDIUM PRESSURE S/N BZ21-UP; HPD1-UP MEDIUM PRESSURE PART OF 383-5055, 451-6709 CONTROL AR-AUXILIARY, 451-6711 OPTION AR-HYDRAULIC 349F L

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 481-5331 WIRING GP-
1. 319-0878 WIRING GP-
2. 479-7793 WIRING GP-
3. 349-6154 WIRING GP-
4. 345-6734 WIRING GP-
5. 430-4645 WIRING GP-
6. 499-2153 WIRING GP-

POWER TRAIN

DRIVE GP-FINAL

7. 333-3036 DRIVE GP-F
8. 353-0527 DRIVE GP-F
9. 353-0528 DRIVE GP-F
0. INFORMATION

EXCAVATOR 349F L EXCAVATOR BZ2
349F & 349F L Excavators BZ200001-UP (MACHINE) POWERED BY C13 Engine SEBP6545 349F L BZ2 (2014)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

527-0834 WIRING GP-FRONT

377-8253 WIRING GP-MEDIUM PRESSURE

481-5331 WIRING GP-MEDIUM PRESSURE

319-0878 WIRING GP-PLATFORM

479-7793 WIRING GP-PLATFORM

349-6154 WIRING GP-SENSOR

#SEBP65450620

481-5331: WIRING GP-MEDIUM PRESSURE

WIRING GP-MEDIUM PRESSURE

481-5331 WIRING GP-MEDIUM PRESSURE
S/N BZ21-UP; HPD1-UP
MEDIUM PRESSURE
PART OF 383-5055, 451-6709 CONTROL AR-AUXILIARY, 451-6711 OPTION AR-HYDRAULIC

i06288159 SEBP6545

4815331 WIRING GP-MEDIUM PRESSURE Parts scheme

For full view, you need register

Parts for your 349F L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[14]	STRAP-CABLE
2.	7K-1181	[11]	STRAP-CABLE
3.	479-7764	[1]	HARNESS AS-CHASSIS
	8T-8730	[7]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[9]	PLUG-SEAL
	125-7874	[5]	TUBE-HEAT SHRINK (5.72-MM DIA)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
			(EACH KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	230-4009	[1]	PLUG AS-CONNECTOR (12-PIN)
	455-0709	[1]	SEAL-CONNECTOR
4.	132-5789	[1]	CLIP (LADDER)
5.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
6.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
	M		METRIC PART

#SEBP65450621

319-0878: WIRING GP-PLATFORM

WIRING GP-PLATFORM

319-0878 WIRING GP-PLATFORM
S/N BZ21-10000; HPD1-10000
PART OF 377-8174 CONTROL & MONITOR GP-CAB

i04046246 SEBP6545

For full view, you need register

Parts for your 349F L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-5169	[1]	GUARD-SWITCH
2.	3S-2093	[14]	STRAP-CABLE
3.	6S-4039	[1]	GROMMET
4.	7G-1060	[1]	STRAP AS-GROUND
5.	7K-1181	[5]	STRAP-CABLE
6.	111-4836	[7]	CLIP
7.	111-4837	[1]	CLIP
8.	116-0118	[6]	CLIP
9.	234-1122	[1]	COVER
10.	301-2981	[1]	SWITCH AS-TOGGLE (SECONDARY SHUTDOWN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
11.	360-6291	[1]	HARNESS AS-PLATFORM
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[15]	STRAP-CABLE
	8T-8737	[5]	PLUG-SEAL
	9W-0852	[8]	PIN-CONNECTOR (14-GA TO 16-GA)
	9W-0844	[5]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(20-CM)
	9X-3402	[24]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	2L-8069	[3]	TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)
	9X-3401	[13]	PIN-CONNECTOR (16-GA TO 18-GA)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	230-4011	[5]	PLUG AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	264-7029	[1]	SEAL-CONNECTOR
	230-4013	[1]	PLUG AS-CONNECTOR (3-PIN)
	264-7030	[1]	SEAL-CONNECTOR
	230-5008	[1]	PLUG AS-CONNECTOR (4-PIN)
	264-7031	[1]	SEAL-CONNECTOR
	237-0227	[3]	PLUG AS-CONNECTOR (3-PIN)
			(EACH INCLUDES)
	264-7030	[1]	SEAL-CONNECTOR
	328-0076	[2]	RECEPTACLE AS-CONNECTOR (12-PIN)
	342-2972	[5]	CAP-CONNECTOR (2-PIN)
	342-2973	[4]	CAP-CONNECTOR (3-PIN)
	342-2978	[1]	CAP-CONNECTOR (4-PIN)
12.	319-1260	[2]	PANEL
13.	328-0077	[2]	CAP
14.	328-0119	[1]	SHEET
15.	096-6166	[2]	WASHER-HARD (4.5X9X1-MM THK)
16.	132-5789	[3]	CLIP (LADDER)
18.	7X-2621 M	[6]	BOLT (M10X1.5X12-MM)
19.	8T-0337 M	[2]	SCREW-MACHINE (M4X0.7X12-MM)
20.	8T-4121	[21]	WASHER-HARD (11X21X2.5-MM THK)
21.	8T-4136 M	[4]	BOLT (M10X1.5X25-MM)
22.	8T-4137 M	[8]	BOLT (M10X1.5X20-MM)
23.	8T-4191 M	[3]	BOLT (M10X1.5X16-MM)
24.	204-1611	[1]	STRAP (DUAL)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP65450622

479-7793: WIRING GP-PLATFORM

WIRING GP-PLATFORM

479-7793 WIRING GP-PLATFORM
S/N BZ210001-UP; HPD10001-UP
PART OF 493-6629 CONTROL & MONITOR GP-CAB

i06795407 SEBP6545

For full view, you need register

Parts for your 349F L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-5169	[1]	GUARD-SWITCH
2.	3S-2093	[12]	STRAP-CABLE
3.	6S-4039	[1]	GROMMET
4.	7G-1060	[1]	STRAP AS-GROUND
5.	7K-1181	[5]	STRAP-CABLE
6.	111-4836	[9]	CLIP
7.	111-4837	[1]	CLIP
8.	116-0118	[3]	CLIP
9.	234-1122	[1]	COVER
10.	301-2981	[1]	SWITCH AS-TOGGLE (SECONDARY SHUTDOWN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
11.	319-1260	[2]	PANEL
12.	328-0077	[2]	CAP
13.	328-0119	[1]	SHEET
14.	479-7823	[1]	HARNESS AS-PLATFORM
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[13]	STRAP-CABLE
	8T-8737	[6]	PLUG-SEAL
	9W-0852	[7]	PIN-CONNECTOR (14-GA TO 16-GA)
	9W-0844	[5]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(20-CM)
	9X-3402	[27]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[27]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	2L-8069	[2]	TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)
	9X-3401	[15]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[15]	PIN-CONNECTOR (14-GA TO 16-GA)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
	230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
	455-0704	[1]	SEAL-CONNECTOR
	281-8803	[7]	PLUG AS-CONNECTOR (3-PIN)
	230-4013	[1]	PLUG AS-CONNECTOR (3-PIN)
			(EACH PLUG AS INCLUDES)
	455-0705	[1]	SEAL-CONNECTOR
	230-5008	[1]	PLUG AS-CONNECTOR (4-PIN)
	455-0706	[1]	SEAL-CONNECTOR
	328-0076	[2]	RECEPTACLE AS-CONNECTOR (12-PIN)
	342-2972	[1]	CAP-CONNECTOR (2-PIN)
	342-2973	[6]	CAP-CONNECTOR (3-PIN)
	342-2978	[1]	CAP-CONNECTOR (4-PIN)
15.	096-6166	[2]	WASHER-HARD (4.5X9X1-MM THK)
16.	132-5789	[3]	CLIP (LADDER)
17.	204-1611	[1]	STRAP (DUAL)
18.	7X-2621 M	[3]	BOLT (M10X1.5X12-MM)
19.	8T-0337 M	[2]	SCREW-MACHINE (M4X0.7X12-MM)
20.	8T-4121	[20]	WASHER-HARD (11X21X2.5-MM THK)
21.	8T-4136 M	[4]	BOLT (M10X1.5X25-MM)
22.	8T-4137 M	[10]	BOLT (M10X1.5X20-MM)
23.	8T-4191 M	[3]	BOLT (M10X1.5X16-MM)
24.	204-1611 B	[1]	STRAP (DUAL)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP65450623

349-6154: WIRING GP-SENSOR

WIRING GP-SENSOR

349-6154 WIRING GP-SENSOR
S/N T4F1-UP
PROVIDE A WIRING GROUP WITH COOLANT TEMPERATURE HARNESS
PART OF 373-3860, 476-6375, 516-8126 ENGINE AR-COMPLETE
FOR USE WITH EXTERNAL HARNESS

i04038667 SEBP6545

For full view, you need register

Parts for your 349F L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	290-1993	[2]	STRAP-CABLE
2.	349-7699	[1]	BRACKET
3.	101-3129 M	[1]	STUD (M10X1.5-THD)
4.	362-1505 Y	[1]	HARNESS AS-SENSOR (COOLANT TEMPERATURE)
5.	4P-7581	[1]	CLIP (LADDER)
6.	6V-5215 M	[1]	BOLT (M8X1.25X16-MM)
7.	6V-5839	[1]	WASHER (11X21X2.5-MM THK)
8.	9M-1974	[1]	WASHER-HARD (8.8X16X2-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP65450624

345-6734: WIRING GP-UNIT INJECTOR

WIRING GP-UNIT INJECTOR

345-6734 WIRING GP-UNIT INJECTOR
S/N T4F1-UP
PROVIDES A WIRING GP TO OPERATE MEUI-C INJECTORS. ALSO CONTAINS COOLANT TEMP PASS THROUGH WIRES.
PART OF 373-3860, 476-6375, 516-8126 ENGINE AR-COMPLETE
FOR USE WITH COOLANT TEMP JUMPER HARNESS
CANNOT BE USED WITH BRAKES AND/OR IVA

i03998688 SEBP6545

3456734 WIRING GP-UNIT INJECTOR Parts scheme

For full view, you need register

Parts for your 349F L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	418-2031 Y	[1]	HARNESS AS-ENGINE
2.	208-9277 M	[3]	BOLT-FLANGE HEAD (M6X1X20-MM)
3.	359-4892	[1]	RING-RETAINING
4.	359-4893	[1]	RING-RETAINING
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP65450625

430-4645: WIRING GP-VALVE

WIRING GP-VALVE

430-4645 WIRING GP-VALVE
S/N BZ21-10000; HPD1-10000
PART OF 377-8247 ELECTRICAL AR

i05673795 SEBP6545

For full view, you need register

Parts for your 349F L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4I-7889	[2]	SPACER (11X25X45-MM THK)
2.	111-4836	[1]	CLIP
3.	116-0118	[2]	CLIP
4.	266-7379	[1]	STRAP-CABLE
5.	427-0044	[1]	HARNESS AS-VALVE
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[10]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[14]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[3]	STRAP-CABLE
	8T-8737	[2]	PLUG-SEAL
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(25-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)
	9X-3402	[16]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[16]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	9X-3401	[10]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[10]	PIN-CONNECTOR (14-GA TO 16-GA)
	155-2270	[8]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
	264-7029	[1]	SEAL-CONNECTOR
	230-4013	[2]	PLUG AS-CONNECTOR (3-PIN)
	237-0227	[2]	PLUG AS-CONNECTOR (3-PIN)
			(EACH PLUG AS INCLUDES)
	264-7030	[1]	SEAL-CONNECTOR
	243-4509	[1]	RECEPTACLE AS-CONNECTOR (8-PIN)
	243-4510	[1]	RECEPTACLE AS-CONNECTOR (12-PIN)
6.	427-0045	[1]	BRACKET AS-VALVE
7.	132-5789	[5]	CLIP (LADDER)
8.	134-3299	[1]	GROMMET
9.	204-1611	[4]	STRAP (DUAL)
10.	177-2215	[3]	STRAP-DUAL CLAMP
11.	3S-2093	[14]	STRAP-CABLE
12.	7K-1181	[10]	STRAP-CABLE
13.	8T-4121	[7]	WASHER-HARD (11X21X2.5-MM THK)
14.	451-2176	[2]	WASHER-HARD (22X35X3.5-MM THK)
15.	8T-4137 M	[2]	BOLT (M10X1.5X20-MM)
16.	8T-4191 M	[3]	BOLT (M10X1.5X16-MM)
17.	8T-5005 M	[1]	BOLT (M10X1.5X70-MM)
18.	453-2845 M	[2]	BOLT (M20X2.5X40-MM)
19.	8T-6466 M	[1]	BOLT (M10X1.5X60-MM)
20.	269-7678	[1]	CLIP
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP65450626

499-2153: WIRING GP-VALVE

WIRING GP-VALVE

499-2153 WIRING GP-VALVE
S/N BZ210001-UP; HPD10001-UP
PART OF 499-2151 ELECTRICAL AR

i06795386 SEBP6545

For full view, you need register

Parts for your 349F L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[14]	STRAP-CABLE
2.	4I-7889	[2]	SPACER (11X25X45-MM THK)
3.	7K-1181	[10]	STRAP-CABLE
4.	111-4836	[1]	CLIP
5.	116-0118	[2]	CLIP
6.	266-7379	[1]	STRAP-CABLE
7.	427-0045	[1]	BRACKET AS-VALVE
8.	451-2176	[2]	WASHER-HARD (22X35X3.5-MM THK)
9.	453-2845 M	[2]	BOLT (M20X2.5X40-MM)
10.	503-9059	[1]	HARNESS AS-VALVE
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[9]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[14]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[3]	STRAP-CABLE
	8T-8737	[4]	PLUG-SEAL
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(25-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)
	9X-3402	[16]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[16]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	9X-3401	[9]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[9]	PIN-CONNECTOR (14-GA TO 16-GA)
	230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
	455-0704	[1]	SEAL-CONNECTOR
	230-4013	[2]	PLUG AS-CONNECTOR (3-PIN)
			(EACH INCLUDES)
	455-0705	[1]	SEAL-CONNECTOR
	243-4509	[1]	RECEPTACLE AS-CONNECTOR (8-PIN)
	243-4510	[1]	RECEPTACLE AS-CONNECTOR (12-PIN)
	237-0227	[2]	PLUG AS-CONNECTOR (3-PIN)
			(EACH INCLUDES)
	455-0705	[1]	SEAL-CONNECTOR
	155-2270	[8]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
11.	269-7678	[1]	CLIP
12.	132-5789	[5]	CLIP (LADDER)
13.	134-3299	[1]	GROMMET
14.	204-1611	[4]	STRAP (DUAL)
15.	177-2215	[3]	STRAP-DUAL CLAMP
16.	8T-4121	[7]	WASHER-HARD (11X21X2.5-MM THK)
17.	8T-4137 M	[2]	BOLT (M10X1.5X20-MM)
18.	8T-4191 M	[3]	BOLT (M10X1.5X16-MM)
19.	8T-5005 M	[1]	BOLT (M10X1.5X70-MM)
20.	8T-6466 M	[1]	BOLT (M10X1.5X60-MM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP65450627

333-3036: DRIVE GP-FINAL

DRIVE GP-FINAL

333-3036 DRIVE GP-FINAL -WITHOUT MOTOR
S/N BZ21-UP; HPD1-UP
PART OF 353-0528 DRIVE GP-FINAL

i04045611 SEBP6545

For full view, you need register

Parts for your 349F L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2R-0524	[2]	CONE-BEARING
2.	2R-0525	[2]	CUP-BEARING
3.	3E-2338	[2]	PLUG-PIPE
4.	4I-7576	[14]	WASHER (66.3X104X3-MM THK)
5.	7Y-0661	[3]	SHAFT-PLANETARY
6.	7Y-0662	[4]	SHAFT-PLANETARY
7.	199-4583	[11]	BEARING AS
8.	7Y-0808 B	[1]	SHIM (1.6-MM THK)
9.	7Y-1469	[1]	COUPLING
10.	7Y-1470	[1]	GEAR-SUN (21-TEETH)
11.	7Y-1472 B	[1]	SHIM (0.15-MM THK)
	7Y-1473 B	[1]	SHIM (0.3-MM THK)
	7Y-1474 B	[1]	SHIM (0.4-MM THK)
	7Y-1475 B	[1]	SHIM (0.5-MM THK)
	7Y-1476 B	[1]	SHIM (0.6-MM THK)
	7Y-1477 B	[1]	SHIM (0.7-MM THK)
	7Y-1478 B	[1]	SHIM (0.8-MM THK)
	7Y-1479 B	[1]	SHIM (1-MM THK)
	7Y-1480 B	[1]	SHIM (1.6-MM THK)
20.	7Y-1482	[1]	CARRIER-PLANETARY
21.	7Y-1483	[1]	GEAR-RING (63-TEETH)
22.	7Y-1485	[1]	CARRIER-PLANETARY
23.	7Y-1487	[1]	GEAR-RING (85-TEETH)
24.	7Y-1488	[1]	CARRIER AS
	7Y-0656	[3]	SHAFT-PLANETARY
25.	7Y-1491	[1]	GEAR-SUN (21-TEETH)
26.	7Y-1493	[1]	SPACER (8.7X50X14-MM THK)
27.	7Y-1495	[3]	GEAR-PLANETARY (29-TEETH)
28.	7Y-1498	[1]	COVER
29.	7Y-1499	[3]	GEAR-PLANETARY (20-TEETH)
30.	7Y-1504	[4]	GEAR-PLANETARY (20-TEETH)
31.	454-6929 M	[20]	BOLT (M24X3X190-MM)
32.	110-7217	[2]	RING-RETAINING
33.	114-1541	[6]	PIN-DOWEL
34.	169-5559	[1]	GEAR-SUN (26-TEETH)
35.	199-4719	[1]	GEAR-COUPLING
36.	227-6048	[12]	WASHER (26X40X4-MM THK)
37.	255-2272	[1]	SEAL GP-DUO-CONE
38.	333-3033	[1]	HOUSING-MOTOR
39.	333-3034	[1]	HOUSING-GEAR
40.	333-3035	[1]	PLATE
41.	094-0584	[6]	WASHER (40.3X72X1-MM THK)
42.	199-4582	[3]	BEARING AS
43.	095-0891	[7]	PIN-SPRING
44.	096-3216 M	[2]	SETSCREW-SOCKET (M12X1.75X12-MM)
45.	4S-5924	[1]	SEAL-O-RING
46.	6V-8133 M	[12]	BOLT (M24X3X80-MM)
47.	6V-8200 M	[20]	BOLT-SOCKET HEAD (M12X1.75X35-MM)
48.	7M-8485	[2]	SEAL-O-RING
49.	7Y-1484	[1]	SPACER (191X221X8.5-MM THK)
50.	7Y-1492	[2]	SPACER (67X101.1X10-MM THK)
51.	8C-5240	[1]	SEAL-O-RING
52.	8T-3957 M	[10]	BOLT-SOCKET HEAD (M12X1.75X30-MM)
53.	451-2177	[20]	WASHER-HARD (26X44X4-MM THK)
54.	451-2182	[20]	WASHER-HARD (13.5X25.5X3-MM THK)
55.	8T-4240	[3]	RING-RETAINING

	1U-8846 BF		SEALANT-GASKET
	B		USE AS REQUIRED
	F		NOT SHOWN
	M		METRIC PART

#SEBP65450628

353-0527: DRIVE GP-FINAL

DRIVE GP-FINAL

353-0527 DRIVE GP-FINAL -WITH MOTOR, SPROCKET
S/N BZ21-686; HPD1-646
PART OF 353-0525 FASTENER GP-FINAL DRIVE

i04045614 SEBP6545

For full view, you need register

Parts for your 349F L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	115-6399 Y	[1]	SPROCKET GP (NON-SEGMENTED)
2.	353-0528 Y	[1]	DRIVE GP-FINAL
	Y		SEPARATE ILLUSTRATION

#SEBP65450629

353-0528: DRIVE GP-FINAL

DRIVE GP-FINAL

353-0528 DRIVE GP-FINAL -WITH MOTOR
S/N BZ21-UP; HPD1-UP
PART OF 353-0527 DRIVE GP-FINAL

i04045608 SEBP6545

For full view, you need register

Parts for your 349F L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	225-4504 Y	[1]	MOTOR & MTG GP-TRAVEL
2.	333-3036 Y	[1]	DRIVE GP-FINAL (WITHOUT MOTOR)
	Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Operation and Maintenance Manual

Battery or Battery Cable - Inspect/Replace
349F and 352F Excavators

Battery - Recycle
349F and 352F Excavators

Power Receptacle - If Equipped
349F and 352F Excavators

Camera Harness - Disconnect and Connect
349F and 352F Excavators

Fuses - Replace
349F and 352F Excavators

Battery Disconnect Switch
349F and 352F Excavators

Fuses - Replace
349F and 352F Excavators

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Installation of the 336-6360 Cab Wiring Gp {1408}
Installation of the 336-6360 Cab Wiring Gp {1408}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Installation of the 350-8401 Cab Wiring Gp on Certain Hydraulic Excavators{1408, 7301}
Installation of the 350-8401 Cab Wiring Gp on Certain Hydraulic Excavators{1408, 7301}

Installation Procedure for the 453-8720 Cab Wiring Gp on Certain Hydraulic Excavators{1408}
Installation Procedure for the 453-8720 Cab Wiring Gp on Certain Hydraulic Excavators{1408}

Installation Procedure for the 451-6711 Hydraulic Option Ar (Tool Control with Medium Pressure) on Certain Hydraulic Excavators {1408, 1439, 1916, 1917, 1923, 1924, 5051, 5057, 5059, 5070, 5073, 5705, 7301, 7405, 7557}
Installation Procedure for the 451-6711 Hydraulic Option Ar (Tool Control with Medium Pressure) on Certain Hydraulic Excavators {1408, 1439, 1916, 1917, 1923, 1924, 5051, 5057, 5059, 5070, 5073, 5705, 7301, 7405, 7557}

Installation Procedure for the 451-6704 Auxiliary Control Ar (Tool Control) on Certain Hydraulic Excavators {1408, 1439, 1916, 1917, 1923, 1924, 5051, 5057, 5059, 5705, 7301, 7405, 7557}
Installation Procedure for the 451-6704 Auxiliary Control Ar (Tool Control) on Certain Hydraulic Excavators {1408, 1439, 1916, 1917, 1923, 1924, 5051, 5057, 5059, 5705, 7301, 7405, 7557}

Installation Procedure for the 451-6705 Auxiliary Control Ar (Single Function) on Certain Hydraulic Excavators {1408, 1439, 1916, 1917, 1923, 1924, 5051, 5057, 5059, 5070, 5073, 5705, 7301, 7405, 7557}
Installation Procedure for the 451-6705 Auxiliary Control Ar (Single Function) on Certain Hydraulic Excavators {1408, 1439, 1916, 1917, 1923, 1924, 5051, 5057, 5059, 5070, 5073, 5705, 7301, 7405, 7557}

Installation Procedure for the 451-6709 Auxiliary Control Ar (Medium Pressure) on Certain Hydraulic Excavators {1408, 1439, 1916, 1917, 1923, 1924, 5051, 5057, 5059, 5070, 5073, 5705, 7301, 7405, 7557}
Installation Procedure for the 451-6709 Auxiliary Control Ar (Medium Pressure) on Certain Hydraulic Excavators {1408, 1439, 1916, 1917, 1923, 1924, 5051, 5057, 5059, 5070, 5073, 5705, 7301, 7405, 7557}

Installation Procedure for 377-8253 Chassis Wiring Gp {1408}
Installation Procedure for 377-8253 Chassis Wiring Gp {1408}

Installation Procedure for 377-8251 Chassis Wiring Gp Tool 20 + Smart Boom On Certain Hydraulic Excavators{1408}
Installation Procedure for 377-8251 Chassis Wiring Gp Tool 20 + Smart Boom On Certain Hydraulic Excavators{1408}

Installation Procedure for 377-8252 Chassis Wiring Gp {1408}
Installation Procedure for 377-8252 Chassis Wiring Gp {1408}

Installation Procedure for the 459-0266 Coupler Control Ar {1408, 5057, 5133, 7301, 7405, 7557}
Installation Procedure for the 459-0266 Coupler Control Ar {1408, 5057, 5133, 7301, 7405, 7557}

Installation of the 481-5331 Medium Pressure Wiring on Certain Hydraulic Excavators{1408}
Installation of the 481-5331 Medium Pressure Wiring on Certain Hydraulic Excavators{1408}

Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}
Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}

New Procedure to Rework Fan Drive Group on Certain 349E, 349F, 349F XE, and 352F XE Excavators {1356, 1408, 7610, 7620}
New Procedure to Rework Fan Drive Group on Certain 349E, 349F, 349F XE, and 352F XE Excavators {1356, 1408, 7610, 7620}

Procedure to Install Additional Cameras on Series F Excavators {1408, 7301, 7348}
Procedure to Install Additional Cameras on Series F Excavators {1408, 7301, 7348}

Master Installation Guide for the 507-6697 Coupler Control Ar on Certain Hydraulic Excavators {1408, 5057, 6129, 7405, 7557}
Master Installation Guide for the 507-6697 Coupler Control Ar on Certain Hydraulic Excavators {1408, 5057, 6129, 7405, 7557}

Installation Procedure for the 493-6643 Cab Wiring Gp on Certain Hydraulic Excavators {1408, 7301}
Installation Procedure for the 493-6643 Cab Wiring Gp on Certain Hydraulic Excavators {1408, 7301}

Installation Procedure for 499-2160 Chassis Wiring Gp On Certain Hydraulic Excavators {1408}
Installation Procedure for 499-2160 Chassis Wiring Gp On Certain Hydraulic Excavators {1408}

Installation Procedure for 507-6699 Control Gp on Certain Hydraulic Excavators {1408}
Installation Procedure for 507-6699 Control Gp on Certain Hydraulic Excavators {1408}

Installation Procedure for 499-2156 Chassis Wiring Gp On Certain Hydraulic Excavators {1408}
Installation Procedure for 499-2156 Chassis Wiring Gp On Certain Hydraulic Excavators {1408}

Installation Procedure for the 507-6701 Auxiliary Control Ar (Medium Pressure) on Certain Hydraulic Excavators {1408, 5057, 5059, 5070, 5073, 7405, 7557}
Installation Procedure for the 507-6701 Auxiliary Control Ar (Medium Pressure) on Certain Hydraulic Excavators {1408, 5057, 5059, 5070, 5073, 7405, 7557}

Installation Procedure for 499-2159 Chassis Wiring Gp {1408}
Installation Procedure for 499-2159 Chassis Wiring Gp {1408}

Installation Procedure for 480-4375 Cab Wiring Gp {1408, 7301}
Installation Procedure for 480-4375 Cab Wiring Gp {1408, 7301}

GRADE System Calibration and Measure-Up Procedure for the 2D and 3D on Excavators {1408, 7220}
GRADE System Calibration and Measure-Up Procedure for the 2D and 3D on Excavators {1408, 7220}

Service Letter-NACD

PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND CORRECTING POSSIBLE INCORRECT CONNECTION OF THE WIRING HARNESS TO THE QUICK COUPLER CONTROL VALVES ON CERTAIN 349F AND 352F-VG EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND CORRECTING POSSIBLE INCORRECT CONNECTION OF THE WIRING HARNESS TO THE QUICK COUPLER CONTROL VALVES ON CERTAIN 349F AND 352F-VG EXCAVATORS

PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS

PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN 320E, 320F, 323E, 323F, 325F, 335F, 336F, 340F, 349F, 352F, AND 374F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN 320E, 320F, 323E, 323F, 325F, 335F, 336F, 340F, 349F, 352F, AND 374F EXCAVATORS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

Quick Coupler Control Harness Is Not Correctly Connected On Certain 349F Hydraulic Excavators{1408}
Quick Coupler Control Harness Is Not Correctly Connected On Certain 349F Hydraulic Excavators{1408}

Steel Cable Strap May Damage the Temperature Sensor Wires on Certain Tier 4 Final Engines {1408, 1900}
Steel Cable Strap May Damage the Temperature Sensor Wires on Certain Tier 4 Final Engines {1408, 1900}

Specifications

Electronic Unit Injector Wiring
C13 Tier 4 Final Engines

Wiring (Jacket Water Heater)
C13 Tier 4 Final Engines

Service Letter-China

Service Letter-Asia

Systems Operation

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Cat Machines

Switches
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System

Sensors
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Service Letter-APD

Testing and Adjusting

Electric Starting System - Test
C13 Tier 4 Final Engines

Connector Contact Description
Cat^® Grade Control Depth & Slope for E-Series and F-Series Excavators

System Schematic
Machine Security System (MSS3i) Integrated

Troubleshooting

Electrical Connectors
C13, C15, and C18 Tier 4 Final Engines

ARD Ignition - Test
C13, C15, and C18 Tier 4 Final Engines

Electrical Connector - Inspect
349F and 352F Excavators

System Schematic
349F and 352F Excavators

Connector Locations
349F and 352F Excavators

Wiring Harness (Open Circuit) - Test
349F and 352F Excavators

Wiring Harness (Short Circuit) - Test
349F and 352F Excavators

Connector Contact Description
349F and 352F Excavators

Electrical Connectors - Inspect
C13, C15, and C18 Tier 4 Final Engines

Connector Contact Description
349F and 352F Excavator Machine System

System Schematic
349F and 352F Excavator Machine System

Connector Locations
2D and 3D GRADE System for Hydraulic Excavators

CAN Data Link - Test
2D and 3D GRADE System for Hydraulic Excavators

Electrical Connector - Inspect
2D and 3D GRADE System for Hydraulic Excavators

Wiring Harness (Open Circuit) - Test
2D and 3D GRADE System for Hydraulic Excavators

Wiring Harness (Short Circuit) - Test
2D and 3D GRADE System for Hydraulic Excavators

Disassembly and Assembly

Nozzle Heater Harness - Remove and Install
C13 Engine for Caterpillar Built Machines

Temperature Sensor (DPF Inlet, Flame Detect) - Remove and Install
C13 Engine for Caterpillar Built Machines

Service Magazine

A New Improved Removal and Installation of the Injector Harness Procedure is Now Used on Certain C13, C15 and C18 Engines {1251, 1408}
2014/08/25

Rework Procedure is Available to Replace a Cab Harness Connector to Match the Harness Connector of a Field Installed Product Link Kit on Certain E Series and F Series Excavators {1408, 7301}
2014/11/17

A New Cat Grade Control Harness Routing is Now Available for Certain Excavators with Cat Grade Control Configurations {1408}
2015/07/27

A New Special Instruction is Available for Troubleshooting the Upper Window Wiper Relay Circuit on Certain 311D-349D, E Series, and F Series Excavators {1408, 7305}
2015/08/07

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

A New Cab Harness Assembly for the Air Conditioner is Now Available for Certain Excavators and Mobile Hydraulic Power Units {1408, 7301, 7320}
A New Cab Harness Assembly for the Air Conditioner is Now Available for Certain Excavators and Mobile Hydraulic Power Units {1408, 7301, 7320}

A New Air Conditioning Relay Harness Assembly Is Available for Certain 320E, 323E, and 320F-390F Excavators {1408, 7320}
A New Air Conditioning Relay Harness Assembly Is Available for Certain 320E, 323E, and 320F-390F Excavators {1408, 7320}

New Cab Harness Routing Is Now Available for Certain Excavators and Mobile Hydraulic Power Units {1408, 7301}
New Cab Harness Routing Is Now Available for Certain Excavators and Mobile Hydraulic Power Units {1408, 7301}

New Steel Cable Straps are Now Used on Certain Tier 4 Final Engines {1408, 1900}
New Steel Cable Straps are Now Used on Certain Tier 4 Final Engines {1408, 1900}

Improved Camera Cable Assembly Is Now Used on Certain Excavators, Mobile Hydraulic Power Units, and OEM Excavator Based Specialty Solutions {1408}
Improved Camera Cable Assembly Is Now Used on Certain Excavators, Mobile Hydraulic Power Units, and OEM Excavator Based Specialty Solutions {1408}

Updated Instructions for GRADE System Calibration and Measure-Up Procedure Are Now Used on Certain Excavators {7220}
Updated Instructions for GRADE System Calibration and Measure-Up Procedure Are Now Used on Certain Excavators {7220}

Caterpillar Parts SIS Catalog 349F L :

377-8253 WIRING GP-MEDIUM PRESSURE

527-0834 WIRING GP-FRONT

527-0832 WIRING GP-FRONT

488-0675 WIRING GP-FRONT

488-0674 WIRING GP-FRONT

369-0107 WIRING GP-FRONT

319-0878 WIRING GP-PLATFORM

479-7793 WIRING GP-PLATFORM

349-6154 WIRING GP-SENSOR

345-6734 WIRING GP-UNIT INJECTOR

430-4645 WIRING GP-VALVE

499-2153 WIRING GP-VALVE

333-3036 DRIVE GP-FINAL

353-0527 DRIVE GP-FINAL

Truck sale:

Caterpillar 349F L
- Crawler Excavators
N C MACHINERY CO.

Caterpillar 349FL
- Crawler Excavators
CATERPILLAR FINANCIAL SERVICES CORPORATION

Caterpillar 349FL
- Crawler Excavators
BOYD CAT COMPANY