236-9769 CYLINDER GP-COUNTERWEIGHT S/N BZ21-UP; HPD1-UP 120.6-MM (4.7-IN) BORE X 845-MM (33.2-IN) STROKE PART OF 225-4533 CYLINDER & SEAL GP-CTWT 349F L

HYDRAULIC SYSTEM

CYLINDER GP

0. 236-9769 CYLINDER G
1. 303-0703 CYLINDER G
2. 390-0600 CYLINDER G
3. 520-8646 CYLINDER G
4. 370-6692 CYLINDER G
5. 513-3691 CYLINDER G

DRIVE GP

6. 315-4440 DRIVE & MT
7. 333-2878 DRIVE & MT
8. 333-2878 DRIVE & MT
9. 296-6249 DRIVE GP-S
0. INFORMATION

EXCAVATOR 349F L EXCAVATOR BZ2
349F & 349F L Excavators BZ200001-UP (MACHINE) POWERED BY C13 Engine SEBP6545 349F L BZ2 (2014)

HYDRAULIC SYSTEM

CYLINDER GP

358-8503 CYLINDER GP-BUCKET

367-5217 CYLINDER GP-BUCKET

236-9769 CYLINDER GP-COUNTERWEIGHT

303-0703 CYLINDER GP-COUPLER

390-0600 CYLINDER GP-COUPLER

520-8646 CYLINDER GP-COUPLER

#SEBP65450830

236-9769: CYLINDER GP-COUNTERWEIGHT

CYLINDER GP-COUNTERWEIGHT

236-9769 CYLINDER GP-COUNTERWEIGHT
S/N BZ21-UP; HPD1-UP
120.6-MM (4.7-IN) BORE X 845-MM (33.2-IN) STROKE
PART OF 225-4533 CYLINDER & SEAL GP-CTWT

i02158559 SEBP6545

2369769 CYLINDER GP-COUNTERWEIGHT Parts scheme

For full view, you need register

Parts for your 349F L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	236-9966	[1]	CYLINDER AS
1A.	123-3790	[1]	BUSHING
2.	5J-3488	[1]	LOCKNUT (2-1/4-12-THD)
3.	4T-8588	[1]	SEAL AS
4.	8T-8390	[1]	RING-WEAR
5.	139-3326	[1]	PISTON
6.	2J-3961	[1]	RING-BACKUP
7.	175-7903	[1]	SEAL-O-RING
8.	114-8135	[1]	HEAD
	225-3284	[1]	SEAL-WIPER
9.	236-9967	[1]	ROD AS
9A.	123-3790	[1]	BUSHING
10.	225-3284	[1]	SEAL-WIPER
11.	167-2319	[1]	SEAL-U-CUP
12.	167-2208	[1]	SEAL AS-BUFFER
13.	8C-9161	[1]	RING-WEAR

#SEBP65450831

303-0703: CYLINDER GP-COUPLER

CYLINDER GP-COUPLER

303-0703 CYLINDER GP-COUPLER
S/N BZ21-UP; HPD1-UP
139.7-MM (5.5-IN) BORE X 193-MM (7.6-IN) STROKE
PART OF 292-4153 COUPLER GP-QUICK

i03526040 SEBP6545

3030703 CYLINDER GP-COUPLER Parts scheme

For full view, you need register

Parts for your 349F L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3B-8489	[1]	FITTING-GREASE (1/8-27 PTF)
2.	9F-2167	[1]	SCREW-PURGE (3/8-24X1.164-IN)
3.	346-5597	[1]	BEARING
4.	346-5598	[2]	BUSHING
5.	346-5599	[1]	PISTON
6.	346-5600	[1]	HEAD
7.	346-5601	[1]	ROD AS
8.	346-5602	[1]	TUBE AS
9.	346-6711 J	[1]	VALVE AS-COUNTERBALANCE
10.	180-8475	[12]	BOLT-SOCKET HEAD (3/4-10X2.25-IN)
11.	3B-8601	[3]	SETSCREW-SOCKET (3/8-16X0.5-IN)
12.	9S-8002	[4]	PLUG (7/16-20-THD)
13.	9S-8004	[1]	PLUG (9/16-18-THD)


			AVAILABLE REPAIR KIT(S):
	346-0644	[1]	KIT-SEAL (COUPLER CYLINDER)
			(INCLUDES WIPER SEAL, DOUBLE LIP SEAL, WEAR RING, O-RING, BACK-UP RING, PISTON RING SET & PISTON RING)
	161-1980 J	[1]	KIT-SERVICE (COUNTERBALANCE VALVE)
	J		KIT MARKED J SERVICES PART(S) MARKED J

#SEBP65450832

390-0600: CYLINDER GP-COUPLER

CYLINDER GP-COUPLER

390-0600 CYLINDER GP-COUPLER -TB-LINKAGE
S/N BZ21-UP; HPD1-UP
102-MM (4-IN) BORE X 165-MM (6.5-IN) STROKE
PART OF 390-1017 COUPLER GP-QUICK

i05891042 SEBP6545

3900600 CYLINDER GP-COUPLER Parts scheme

For full view, you need register

Parts for your 349F L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	237-0947 J	[1]	VALVE GP-CHECK (PILOT OPERATED)
2.	3J-1907	[1]	SEAL-O-RING
3.	3J-7354	[1]	SEAL-O-RING
4.	9S-8002	[1]	PLUG (7/16-20-THD)
5.	9S-8004	[1]	PLUG (9/16-18-THD)
6.	9F-2167	[1]	SCREW-PURGE (3/8-24X1.164-IN)

			AVAILABLE REPAIR KIT(S):
	453-6522	[1]	KIT-PACKING (COUPLER CYLINDER)
			(INCLUDES O-RINGS, BACK-UP RINGS, DUST SEAL, BP SEAL & POLYPAK SEAL)
	213-8433 J	[1]	KIT-SEAL (CHECK VALVE)
	J		KIT MARKED J SERVICES PART(S) MARKED J

#SEBP65450833

520-8646: CYLINDER GP-COUPLER

CYLINDER GP-COUPLER

520-8646 CYLINDER GP-COUPLER
S/N BZ21-UP; HPD1-UP
101.6-MM (4-IN) BORE X 164.9-MM (6.5-IN) STROKE
PART OF 390-1017 COUPLER GP-QUICK

i07356559 SEBP6545

5208646 CYLINDER GP-COUPLER Parts scheme

For full view, you need register

Parts for your 349F L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	237-0947 J	[1]	VALVE GP-CHECK (PILOT OPERATED)
2.	3J-1907	[1]	SEAL-O-RING
3.	3J-7354	[1]	SEAL-O-RING
4.	9S-8002	[1]	PLUG (7/16-20-THD)
5.	9S-8004	[1]	PLUG (9/16-18-THD)
6.	9F-2167	[1]	SCREW-PURGE (3/8-24X1.164-IN)

			AVAILABLE REPAIR KIT(S):
	213-8433 J	[1]	KIT-SEAL (CHECK VALVE)
	453-6522	[1]	KIT-PACKING (COUPLER CYLINDER)
			(INCLUDES O-RINGS, BACKUP RINGS & SEALS)
	J		KIT MARKED J SERVICES PART(S) MARKED J

#SEBP65450834

370-6692: CYLINDER GP-STICK

CYLINDER GP-STICK

370-6692 CYLINDER GP-STICK
S/N BZ21-UP; HPD1-UP
190-MM (7.48-IN) BORE X 1758-MM (69.2-IN) STROKE
PART OF 358-8460 CYLINDER & SEAL GP-STICK

i04551522 SEBP6545

For full view, you need register

Parts for your 349F L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	358-8462	[1]	CYLINDER AS
1A.	126-1956	[1]	BUSHING
2.	358-8472	[1]	ROD AS
2A.	228-5618	[1]	BUSHING
3.	370-6693	[1]	HEAD
4.	370-6664 J	[1]	SEAL-O-RING
5.	370-6665 J	[2]	RING-BACKUP
6.	165-9293 J	[1]	SEAL-LIP TYPE
7.	087-5397 J	[1]	RING-BACKUP
8.	333-8673 J	[1]	SEAL-U-CUP
9.	333-8672 J	[1]	SEAL-BUFFER
10.	114-0763	[1]	BUSHING
11.	087-5393	[1]	RING-RETAINING
12.	200-3620 J	[1]	RING-SEAL
13.	359-7190	[1]	STOP
14.	358-8478	[1]	PISTON
15.	204-2845 J	[2]	RING
16.	495-8218 J	[1]	SEAL AS
17.	204-2846 J	[1]	RING
18.	126-1971 M	[1]	LOCKNUT-SPECIAL
19.	225-4641	[1]	RING-RETAINING
20.	225-4642	[1]	RING
21.	095-0930	[2]	RING-RETAINING (EXTERNAL)
22.	359-7189	[1]	STOP
23.	173-9684 M	[10]	BOLT (M24X3X100-MM)

			AVAILABLE REPAIR KIT(S):
	518-5140 J	[1]	KIT-SEAL (STICK CYLINDER)
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP65450835

513-3691: CYLINDER GP-STICK

CYLINDER GP-STICK

513-3691 CYLINDER GP-STICK
S/N BZ21-UP; HPD1-UP
190-MM (7.5-IN) BORE X 1758-MM (69.2-IN) STROKE
PART OF 358-8460 CYLINDER & SEAL GP-STICK

i07083864 SEBP6545

For full view, you need register

Parts for your 349F L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	513-3690	[1]	CYLINDER AS-STICK
1A.	462-2010	[1]	BUSHING
2.	513-3687	[1]	ROD AS
2A.	228-5618	[1]	BUSHING
3.	370-6693	[1]	HEAD
4.	370-6664 J	[1]	SEAL-O-RING
5.	370-6665 J	[2]	RING-BACKUP
6.	165-9293 J	[1]	SEAL-LIP TYPE
7.	087-5397 J	[1]	RING-BACKUP
8.	333-8673 J	[1]	SEAL-U-CUP
9.	333-8672 J	[1]	SEAL-BUFFER
10.	114-0763	[1]	BUSHING
11.	524-7886	[1]	STOP
12.	200-3620 J	[1]	RING-SEAL
13.	359-7190	[1]	STOP
14.	358-8478	[1]	PISTON
15.	204-2845 J	[2]	RING
16.	495-8218 J	[1]	SEAL AS
17.	204-2846 J	[1]	RING
18.	126-1971 M	[1]	LOCKNUT-SPECIAL
19.	143-1452	[2]	RING-RETAINING
20.	087-5393	[1]	RING-RETAINING
21.	147-5764	[1]	RING-RETAINING
22.	147-5765	[1]	RING
23.	173-9684 M	[10]	BOLT (M24X3X100-MM)
24.	6V-8237	[10]	WASHER (26X44X4-MM THK)

			AVAILABLE REPAIR KIT(S):
	518-5140 J		KIT-SEAL (STICK CYLINDER)
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART

#SEBP65450836

315-4440: DRIVE & MTG GP-AUXILIARY PUMP

DRIVE & MTG GP-AUXILIARY PUMP

315-4440 DRIVE & MTG GP-AUXILIARY PUMP
S/N BZ21-UP; HPD1-UP
PART OF 325-8920 PUMP & MTG GP-AUXILIARY

i04040003 SEBP6545

3154440 DRIVE & MTG GP-AUXILIARY PUMP Parts scheme

For full view, you need register

Parts for your 349F L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	236-6919	[2]	SEAL-O-RING
2.	334-9958	[1]	COUPLING
3.	334-9959	[1]	SPACER
4.	8T-4648 M	[2]	BOLT (M12X1.75X70-MM)
5.	2L-6726	[1]	RING-RETAINING
	M		METRIC PART

#SEBP65450837

333-2878: DRIVE & MTG GP-SWING

DRIVE & MTG GP-SWING

333-2878 DRIVE & MTG GP-SWING
S/N BZ21-UP; HPD1-UP
PART OF 333-2876 POWER TRAIN AR

i04045520 SEBP6545

3332878 DRIVE & MTG GP-SWING Parts scheme

For full view, you need register

Parts for your 349F L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2B-7561	[4]	CORK
2.	5D-1026	[2]	CLAMP-BAND
3.	096-4755	[4]	PIN
4.	296-6249 Y	[1]	DRIVE GP-SWING (WITH MOTOR, RH)
5.	296-6252 Y	[1]	DRIVE GP-SWING (WITH MOTOR, LH)
6.	461-3882 M	[20]	BOLT (M24X3X70-MM)
7.	6V-8237	[20]	WASHER (26X44X4-MM THK)
8.	5P-0767 E		HOSE (130-CM EACH)

	1U-8846 BF	[1]	SEALANT-GASKET
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	F		NOT SHOWN
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP65450838

333-2878: DRIVE & MTG GP-SWING

DRIVE & MTG GP-SWING

333-2878 DRIVE & MTG GP-SWING
S/N BZ21-UP; HPD1-UP
PART OF 333-2876, 539-0888 POWER TRAIN AR

i06719040 SEBP6545

For full view, you need register

Parts for your 349F L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2B-7561	[4]	CORK
2.	5D-1026	[2]	CLAMP-BAND
3.	096-4755	[4]	PIN
4.	475-1176 CY	[1]	DRIVE GP-SWING (WITH MOTOR, RH)
5.	475-1175 CY	[1]	DRIVE GP-SWING (WITH MOTOR, LH)
6.	509-7906 M	[20]	BOLT (M24X3X70-MM)
7.	6V-8237	[20]	WASHER (26X44X4-MM THK)
8.	5P-0767 E		HOSE (130-CM EACH)

	1U-8846 BF	[1]	SEALANT-GASKET
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	F		NOT SHOWN
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP65450839

296-6249: DRIVE GP-SWING

DRIVE GP-SWING

296-6249 DRIVE GP-SWING -WITH MOTOR, RH
S/N BZ21-UP; HPD1-UP
PART OF 333-2878 DRIVE & MTG GP-SWING

i02877398 SEBP6545

For full view, you need register

Parts for your 349F L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	225-4505 Y	[1]	MOTOR & MTG GP-SWING
2.	296-6250 Y	[1]	DRIVE GP-SWING
	Y		SEPARATE ILLUSTRATION

Information:

HYDRAULIC SYSTEM

CYLINDER GP

Special Instruction

Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}

Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}

Troubleshooting Procedure For Bucket Cylinder Position Sensing Unit on Certain Hydraulic Excavators Equipped With Cat ® Grade Control {5457}
Troubleshooting Procedure For Bucket Cylinder Position Sensing Unit on Certain Hydraulic Excavators Equipped With Cat ^® Grade Control {5457}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK CYLINDER HEAD BOLTS ON CERTAIN 345, 349, 352 LARGE EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STICK CYLINDER HEAD BOLTS ON CERTAIN 345, 349, 352 LARGE EXCAVATORS

PRODUCT SUPPORT PROGRAM FOR REPLACING THE SENSOR INSIDE THE POSITION SENSING CYLINDER ON CERTAIN EXCAVATORS EQUIPPED WITH CAT GRADE CONTROL
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SENSOR INSIDE THE POSITION SENSING CYLINDER ON CERTAIN EXCAVATORS EQUIPPED WITH CAT GRADE CONTROL

PRODUCT SUPPORT PROGRAM FOR REPLACING THE CYLINDER PISTON SEAL FOR THE BOOM, STICK, OR BUCKET ON CERTAIN 336D, 336D2, 336E, 336F, 340D, 340D2, 349D, 349D2, 349E, 349F, AND 352F EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE CYLINDER PISTON SEAL FOR THE BOOM, STICK, OR BUCKET ON CERTAIN 336D, 336D2, 336E, 336F, 340D, 340D2, 349D, 349D2, 349E, 349F, AND 352F EXCAVATORS

PRODUCT SUPPORT PROGRAM FOR REPLACING THE POSITION SENSING BUCKET CYLINDER ON CERTAIN 320E, 323E/F, 325F, 336D/E/F, 345D, 349D/D2, 349E/F, AND 352F EXCAVATORS, EQUIPPED WITH CAT GRADE CONTROL APPLICATION
PRODUCT SUPPORT PROGRAM FOR REPLACING THE POSITION SENSING BUCKET CYLINDER ON CERTAIN 320E, 323E/F, 325F, 336D/E/F, 345D, 349D/D2, 349E/F, AND 352F EXCAVATORS, EQUIPPED WITH CAT GRADE CONTROL APPLICATION

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

Plug Located on the Coupler Cylinder Valve Block May Fail on Certain Pin Grabbers {5133}
Plug Located on the Coupler Cylinder Valve Block May Fail on Certain Pin Grabbers {5133}

Specifications

Boom Lines - Long Reach Boom
349F and 352F Excavators Machine System Specifications

Counterweight Cylinder
349F and 352F Excavators Machine System Specifications

Bucket Cylinder
349F and 352F Excavators Machine System Specifications

Boom Cylinder Lines
349F and 352F Excavators Machine System Specifications

Boom Cylinder
349F and 352F Excavators Machine System Specifications

Boom Lines
349F and 352F Excavators Machine System Specifications

Bucket Cylinder
349F and 352F Excavators Machine System Specifications

Cylinder Guard
349F and 352F Excavators Machine System Specifications

Cylinder Mounting
349F and 352F Excavators Machine System Specifications

Boom Cylinder Lines
349F and 352F Excavators Machine System Specifications

Boom Lines
349F and 352F Excavators Machine System Specifications

Stick Cylinder
349F and 352F Excavators Machine System Specifications

Service Letter-China

Service Letter-Asia

Systems Operation

Cylinders (Boom, Stick and Bucket)
349F and 352F Excavators Machine System

Reuse And Salvage Guidelines

Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}

Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}

Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}

Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}

Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}

Contamination Control Guidelines

Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}

Applied Failure Analysis

Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Service Letter-APD

Testing and Adjusting

Cylinder Drift - Check - Loaded Bucket
349F and 352F Excavators Hydraulic System

Cylinder Drift - Check - Empty Bucket
349F and 352F Excavators Hydraulic System

Cylinder Speed - Check
349F and 352F Excavators Hydraulic System

Relief Valve (Counterweight Cylinder) - Test and Adjust
349F and 352F Excavators Hydraulic System

Bench Test Procedures

Disassembly and Assembly

Counterweight Cylinder - Remove and Install
349F and 352F Excavators Machine Systems

Manual Valve (Boom Lowering) - Remove and Install
349F and 352F Excavators Machine Systems

Load Control Valve (Stick Cylinder) - Remove and Install
349F and 352F Excavators Machine Systems

Bucket Cylinder - Remove and Install
349F and 352F Excavators Machine Systems

Stick Cylinder - Remove and Install
349F and 352F Excavators Machine Systems

Boom Cylinder - Remove and Install
349F and 352F Excavators Machine Systems

Service Magazine

Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}

New Cylinder Head Bolts are Now Used on Certain Excavators {5456, 5457, 5458}
2015/06/17

New Bolts are Now Used for the Stick Cylinder Head on Certain Excavators {5458}
2015/09/25

Improved Quality Control Process With Class II and Class III Position Sensing Cylinder Sensor {5457}
Improved Quality Control Process With Class II and Class III Position Sensing Cylinder Sensor {5457}

New Cylinder Head Bolts are Now Used on Certain Excavators {5457, 5458}
New Cylinder Head Bolts are Now Used on Certain Excavators {5457, 5458}

New Tightening Procedure for the Stick Cylinder Piston Locknut is Available on Certain Excavators and Mobile Hydraulic Power Unit {5458}
New Tightening Procedure for the Stick Cylinder Piston Locknut is Available on Certain Excavators and Mobile Hydraulic Power Unit {5458}

A Procedure for Initial Cycling of Hydraulic Cylinders to Remove Air and Prevent Cylinder Dieseling is Now Being Used on Certain Excavators {5457}
A Procedure for Initial Cycling of Hydraulic Cylinders to Remove Air and Prevent Cylinder Dieseling is Now Being Used on Certain Excavators {5457}

Improved Cylinder Piston Seals Are Now Used on Certain Excavators and Mobile Hydraulic Power Units {5458}
Improved Cylinder Piston Seals Are Now Used on Certain Excavators and Mobile Hydraulic Power Units {5458}

An Improved Coupler Cylinder for Pin Grabber Is Now Used on Certain Excavators {5133}
An Improved Coupler Cylinder for Pin Grabber Is Now Used on Certain Excavators {5133}

New Stick Cylinder Group Is Now Used on Certain Excavators and OEM Excavator Based Specialty Solutions {5458}
New Stick Cylinder Group Is Now Used on Certain Excavators and OEM Excavator Based Specialty Solutions {5458}

Improved Cylinder Piston Seals Are Now Used on Certain Excavators and Mobile Hydraulic Power Units {5456, 5457, 5458}
Improved Cylinder Piston Seals Are Now Used on Certain Excavators and Mobile Hydraulic Power Units {5456, 5457, 5458}

Stick Cylinder Head Bolted Joint Improvement is Now Used on Certain 349D, 349D2, 349E, 349F, and 352F Excavators {5458}
Stick Cylinder Head Bolted Joint Improvement is Now Used on Certain 349D, 349D2, 349E, 349F, and 352F Excavators {5458}

Caterpillar Parts SIS Catalog 349F L :

367-5217 CYLINDER GP-BUCKET

358-8503 CYLINDER GP-BUCKET

357-9784 CYLINDER GP-BUCKET

419-5749 CYLINDER GP-BOOM

358-8435 CYLINDER AR-BOOM

358-8432 CYLINDER AR-BOOM

358-8460 CYLINDER & SEAL GP-STICK

303-0703 CYLINDER GP-COUPLER

390-0600 CYLINDER GP-COUPLER

520-8646 CYLINDER GP-COUPLER

370-6692 CYLINDER GP-STICK

513-3691 CYLINDER GP-STICK

315-4440 DRIVE & MTG GP-AUXILIARY PUMP

333-2878 DRIVE & MTG GP-SWING

Truck sale:

Caterpillar 349F L
- Crawler Excavators
N C MACHINERY CO.

Caterpillar 349FL
- Crawler Excavators
CATERPILLAR FINANCIAL SERVICES CORPORATION

Caterpillar 349FL
- Crawler Excavators
BOYD CAT COMPANY