AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

296-6250 DRIVE GP-SWING -WITHOUT MOTOR, RH S/N BZ21-UP; HPD1-UP PART OF 296-6249 DRIVE GP-SWING 349F L


HYDRAULIC SYSTEM
DRIVE GP
FILTER GP

EXCAVATOR 349F L EXCAVATOR BZ2
 349F & 349F L Excavators BZ200001-UP (MACHINE) POWERED BY C13 Engine SEBP6545 349F L BZ2   (2014)

HYDRAULIC SYSTEM

DRIVE GP
DRIVE & MTG GP-SWING
333-2878 DRIVE & MTG GP-SWING
DRIVE GP-SWING
296-6249 DRIVE GP-SWING
DRIVE GP-SWING
296-6250 DRIVE GP-SWING
DRIVE GP-SWING
296-6252 DRIVE GP-SWING
DRIVE GP-SWING
296-6253 DRIVE GP-SWING
DRIVE GP-SWING
418-7155 DRIVE GP-SWING
 

#SEBP65450840
 

296-6250: DRIVE GP-SWING

296-6250 DRIVE GP-SWING -WITHOUT MOTOR, RH
S/N BZ21-UP; HPD1-UP
PART OF 296-6249 DRIVE GP-SWING
i02877442 SEBP6545
2966250 DRIVE GP-SWING Parts scheme 2966250 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 349F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4H-6112 [1] BREATHER (SWING DRIVE)  
2. 4I-7464 [4] GEAR-PLANETARY (25-TEETH)  
3. 4I-7466 [4] GEAR-PLANETARY (23-TEETH)  
4. 4I-7467 [1] GEAR-RING (72-TEETH)  
5. 6V-7238 [1] VALVE-SHUTOFF  
6. 7I-7728 [1] CARRIER-PLANETARY  
7. 7Y-0597 [1] SPACER-SPECIAL  
8. 7Y-1238 [1] CARRIER  
9. 093-1730 [2] RING-RETAINING  
10. 094-1509 [4] SHAFT-PLANETARY  
11. 094-1528 [8] WASHER (53X84X1-MM THK)  
12. 095-1806 [1] BEARING-ROLLER  
13. 096-2653 [1] RING-RETAINING  
14. 096-4339 [1] BEARING AS-ROLLER  
15. 110-7216 [1] GEAR-SUN (24-TEETH)  
16. 114-1383 [4] SHAFT-PLANETARY  
17. 114-1398 [1] GAUGE-OIL LEVEL (SWING DRIVE)  
18. 114-1399 [1] PIPE-GAUGE  
19. 114-1401 [1] COVER-HOUSING  
20. 114-1403 [1] CAGE  
21. 136-2802 [2] CONNECTOR  
22. 136-2803 [2] CLIP  
23. 169-5534 [1] HOUSING  
24. 169-5535 [1] GEAR-SUN (20-TEETH)  
25. 227-6108 [1] SHAFT-PINION  
26. 227-6215 [1] BOSS (1/4-18-THD)  
27. 296-6251 I [1] HOSE AS  
28. 093-1731 [1] RING-RETAINING  
29. 094-0584 [8] WASHER (40.3X72X1-MM THK)  
30. 199-4582 [4] BEARING AS  
31. 095-0886 [4] PIN-SPRING  
32. 509-6676 [4] PIN-SPRING  
33. 135-9044 [2] SEAL-LIP TYPE  
34. 3K-0360 [1] SEAL-O-RING  
35. 5P-2235 [1] SEAL-O-RING  
36. 191-2513 [8] BEARING AS-ROLLER  
37. 7Y-0595 [1] SPACER (58X79.6X6-MM THK)  
38. 7Y-1434 [1] SPACER (40X69.5X6-MM THK)  
39. 453-3447 M [8] BOLT (M12X1.75X40-MM)  
40. 451-2182 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
41. 8T-4244 M [1] NUT (M12X1.75-THD)  
42. 453-3446 M [1] BOLT (M12X1.75X35-MM)  
43. 453-2843 M [16] BOLT (M16X2X180-MM)  
44. 451-2175 [16] WASHER-HARD (17.5X30X3.5-MM THK)  
45. 1U-8846 B SEALANT-GASKET  
  B   USE AS REQUIRED
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP65450841
 

296-6252: DRIVE GP-SWING

296-6252 DRIVE GP-SWING -WITH MOTOR, LH
S/N BZ21-UP; HPD1-UP
PART OF 333-2878 DRIVE & MTG GP-SWING
i02877459 SEBP6545
2966252 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 349F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 225-4505 Y [1] MOTOR & MTG GP-SWING  
2. 296-6253 Y [1] DRIVE GP-SWING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP65450842
 

296-6253: DRIVE GP-SWING

296-6253 DRIVE GP-SWING -WITHOUT MOTOR, LH
S/N BZ21-UP; HPD1-UP
PART OF 296-6252 DRIVE GP-SWING
i02877486 SEBP6545
2966253 DRIVE GP-SWING Parts scheme 2966253 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 349F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4H-6112 [1] BREATHER (SWING DRIVE)  
2. 4I-7464 [4] GEAR-PLANETARY (25-TEETH)  
3. 4I-7466 [4] GEAR-PLANETARY (23-TEETH)  
4. 4I-7467 [1] GEAR-RING (72-TEETH)  
5. 6V-7238 [1] VALVE-SHUTOFF  
6. 7I-7728 [1] CARRIER-PLANETARY  
7. 7Y-0597 [1] SPACER-SPECIAL  
8. 7Y-1238 [1] CARRIER  
9. 093-1730 [2] RING-RETAINING  
10. 094-1509 [4] SHAFT-PLANETARY  
11. 094-1528 [8] WASHER (53X84X1-MM THK)  
12. 095-1806 [1] BEARING-ROLLER  
13. 096-2653 [1] RING-RETAINING  
14. 096-4339 [1] BEARING AS-ROLLER  
15. 110-7216 [1] GEAR-SUN (24-TEETH)  
16. 114-1383 [4] SHAFT-PLANETARY  
17. 114-1398 [1] GAUGE-OIL LEVEL (SWING DRIVE)  
18. 114-1399 [1] PIPE-GAUGE  
19. 114-1401 [1] COVER-HOUSING  
20. 114-1403 [1] CAGE  
21. 136-2802 [2] CONNECTOR  
22. 136-2803 [2] CLIP  
23. 169-5534 [1] HOUSING  
24. 169-5535 [1] GEAR-SUN (20-TEETH)  
25. 227-6108 [1] SHAFT-PINION  
26. 227-6215 [1] BOSS (1/4-18-THD)  
27. 296-6251 I [1] HOSE AS  
28. 093-1731 [1] RING-RETAINING  
29. 094-0584 [8] WASHER (40.3X72X1-MM THK)  
30. 199-4582 [4] BEARING AS  
31. 095-0886 [4] PIN-SPRING  
32. 509-6676 [4] PIN-SPRING  
33. 135-9044 [2] SEAL-LIP TYPE  
34. 3K-0360 [1] SEAL-O-RING  
35. 5P-2235 [1] SEAL-O-RING  
36. 191-2513 [8] BEARING AS-ROLLER  
37. 7Y-0595 [1] SPACER (58X79.6X6-MM THK)  
38. 7Y-1434 [1] SPACER (40X69.5X6-MM THK)  
39. 8T-4183 M [8] BOLT (M12X1.75X40-MM)  
40. 8T-4223 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
41. 8T-4244 M [1] NUT (M12X1.75-THD)  
42. 453-3446 M [1] BOLT (M12X1.75X35-MM)  
43. 8T-6385 M [16] BOLT (M16X2X180-MM)  
44. 9X-8257 [16] WASHER (17.5X30X3.5-MM THK)  
45. 1U-8846 B SEALANT-GASKET  
  B   USE AS REQUIRED
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP65450843
 

418-7155: DRIVE GP-SWING

418-7155 DRIVE GP-SWING -WITHOUT MOTOR, LH
S/N BZ21-20463; HPD1-20427
PART OF 475-1175 DRIVE GP-SWING
i06719437 SEBP6545
4187155 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 349F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4H-6112 [1] BREATHER (SWING DRIVE)  
2. 6V-7238 [1] VALVE-SHUTOFF  
3. 7Y-0597 [1] SPACER-SPECIAL  
4. 094-0611 [14] WASHER (47.3X76X1-MM THK)  
5. 114-1398 [1] GAUGE-OIL LEVEL (SWING DRIVE)  
6. 114-1399 [1] PIPE-GAUGE  
7. 114-1403 [1] CAGE  
8. 227-6108 [1] SHAFT-PINION  
9. 227-6215 [1] BOSS (1/4-18-THD)  
10. 296-6268 [3] BEARING AS-ROLLER  
11. 418-7160 [1] GEAR-SUN (13-TEETH, 18-TEETH)  
12. 418-7161 [1] GEAR-SUN (23-TEETH)  
13. 418-7162 [3] GEAR-PLANETARY (25-TEETH)  
14. 418-7163 [4] GEAR-PLANETARY (22-TEETH)  
15. 418-7164 [1] GEAR-RING (69-TEETH)  
16. 418-7167 [4] SHAFT  
17. 418-7232 [1] COVER-HOUSING  
18. 418-7233 [8] BEARING AS-ROLLER  
19. 418-7234 [1] CARRIER AS  
20. 418-7235 [1] CARRIER-PLANETARY  
21. 422-1352 [2] SPACER (49.6X69.5X6-MM THK)  
22. 422-4054 [3] RING-RETAINING  
23. 451-2182 [52] WASHER-HARD (13.5X25.5X3-MM THK)  
24. 453-3446 M [1] BOLT (M12X1.75X35-MM)  
25. 453-3447 M [20] BOLT (M12X1.75X40-MM)  
26. 456-0784 [1] HOUSING  
27. 486-7828 [1] HOSE AS  
28. 093-1730 [2] RING-RETAINING  
29. 095-0670 M [30] BOLT (M12X1.75X45-MM)  
30. 509-6676 [4] PIN-SPRING  
31. 095-1806 [1] BEARING-ROLLER  
32. 096-2653 [1] RING-RETAINING  
33. 096-4339 [1] BEARING AS-ROLLER  
34. 135-9044 [2] SEAL-LIP TYPE  
35. 136-2803 [2] CLIP  
36. 3K-0360 [1] SEAL-O-RING  
37. 5P-2235 [1] SEAL-O-RING  
38. 7D-5363 [2] CONNECTOR (9/16-18-THD)  
39. 8T-4244 M [1] NUT (M12X1.75-THD)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP65450844
 

470-0474: DRIVE GP-SWING

470-0474 DRIVE GP-SWING -WITHOUT MOTOR, RH
S/N BZ21-20463; HPD1-20427
PART OF 475-1176 DRIVE GP-SWING
i06719504 SEBP6545
4700474 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 349F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4H-6112 [1] BREATHER (SWING DRIVE)  
2. 6V-7238 [1] VALVE-SHUTOFF  
3. 7Y-0597 [1] SPACER-SPECIAL  
4. 094-0611 [14] WASHER (47.3X76X1-MM THK)  
5. 114-1398 [1] GAUGE-OIL LEVEL (SWING DRIVE)  
6. 114-1399 [1] PIPE-GAUGE  
7. 114-1403 [1] CAGE  
8. 227-6108 [1] SHAFT-PINION  
9. 227-6215 [1] BOSS (1/4-18-THD)  
10. 296-6268 [3] BEARING AS-ROLLER  
11. 418-7160 [1] GEAR-SUN (13-TEETH, 18-TEETH)  
12. 418-7161 [1] GEAR-SUN (23-TEETH)  
13. 418-7162 [3] GEAR-PLANETARY (25-TEETH)  
14. 418-7163 [4] GEAR-PLANETARY (22-TEETH)  
15. 418-7164 [1] GEAR-RING (69-TEETH)  
16. 418-7167 [4] SHAFT  
17. 418-7232 [1] COVER-HOUSING  
18. 418-7233 [8] BEARING AS-ROLLER  
19. 418-7234 [1] CARRIER AS  
20. 418-7235 [1] CARRIER-PLANETARY  
21. 422-1352 [2] SPACER (49.6X69.5X6-MM THK)  
22. 422-4054 [3] RING-RETAINING  
23. 451-2182 [52] WASHER-HARD (13.5X25.5X3-MM THK)  
24. 453-3446 M [1] BOLT (M12X1.75X35-MM)  
25. 453-3447 M [20] BOLT (M12X1.75X40-MM)  
26. 456-0784 [1] HOUSING  
27. 486-7828 [1] HOSE AS  
28. 093-1730 [2] RING-RETAINING  
29. 095-0670 M [30] BOLT (M12X1.75X45-MM)  
30. 095-0891 [4] PIN-SPRING  
31. 095-1806 [1] BEARING-ROLLER  
32. 096-2653 [1] RING-RETAINING  
33. 096-4339 [1] BEARING AS-ROLLER  
34. 135-9044 [2] SEAL-LIP TYPE  
35. 136-2803 [2] CLIP  
36. 3K-0360 [1] SEAL-O-RING  
37. 5P-2235 [1] SEAL-O-RING  
38. 7D-5363 [2] CONNECTOR (9/16-18-THD)  
39. 8T-4244 M [1] NUT (M12X1.75-THD)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP65450845
 

475-1175: DRIVE GP-SWING

475-1175 DRIVE GP-SWING -WITH MOTOR, LH
S/N BZ21-UP; HPD1-UP
PART OF 333-2878 DRIVE & MTG GP-SWING
i06719238 SEBP6545
4751175 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 349F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 418-7155 Y [1] DRIVE GP-SWING  
2. 486-5235 Y [1] MOTOR & MTG GP-SWING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP65450846
 

475-1176: DRIVE GP-SWING

475-1176 DRIVE GP-SWING -WITH MOTOR, RH
S/N BZ21-UP; HPD1-UP
PART OF 333-2878 DRIVE & MTG GP-SWING
i06719055 SEBP6545
4751176 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 349F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 470-0474 Y [1] DRIVE GP-SWING  
2. 486-5235 Y [1] MOTOR & MTG GP-SWING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP65450847
 

158-8987: FILTER & VALVE GP-PILOT

158-8987 FILTER & VALVE GP-PILOT -HYDRAULIC OIL
S/N BZ21-UP; HPD1-UP
PART OF 424-9524 LINES GP-PILOT
i07000301 SEBP6545
1588987 FILTER & VALVE GP-PILOT Parts scheme
  For full view, you need register

Parts for your 349F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5I-8670 [1] FILTER-OIL (ADVANCED EFFICIENCY)(HYDRAULIC, PILOT)  
2. 215-4909 [1] VALVE GP-PILOT RELIEF (HYDRAULIC FILTER)  
2A. 095-1584 [1] SEAL-O-RING  
2B. 095-1590 [1] SEAL-O-RING  
2C. 095-1596 [1] SEAL-O-RING  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
 

#SEBP65450848
 

158-8987: FILTER & VALVE GP-PILOT

158-8987 FILTER & VALVE GP-PILOT -HYDRAULIC OIL
S/N BZ21-UP; HPD1-UP
PART OF 424-9524 LINES GP-PILOT
i01408164 SEBP6545
1588987 FILTER & VALVE GP-PILOT Parts scheme 1588987 FILTER & VALVE GP-PILOT Parts scheme
  For full view, you need register

Parts for your 349F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5I-8670 J [1] FILTER-OIL (ADVANCED EFFICIENCY)(HYDRAULIC, PILOT)  
2. 215-4909 [1] VALVE GP-PILOT RELIEF (HYDRAULIC FILTER)  
2A. 095-1584 [1] SEAL-O-RING  
2B. 095-1590 [1] SEAL-O-RING  
2C. 095-1596 [1] SEAL-O-RING  
3. 126-1813 AL [1] FILTER-OIL (ULTRA HIGH EFFICIENCY)(HYDRAULIC, PILOT)  
4. 103-8236 AL [1] RING  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
  A   NOT PART OF THIS GROUP
  J   FOR USE WITH FILTER BASE WITH M45X2-THD)
  L   ALTERNATE DESIGN-FOR USE WITH FILTER BASE WITH 2-12 THD
 

#SEBP65450849
 

188-4145: FILTER GP-OIL

188-4145 FILTER GP-OIL -HYDRAULIC RETURN
S/N BZ21-UP; HPD1-UP
PART OF 388-0294, 460-0382 TANK & FILTER GP-HYDRAULIC
i05661305 SEBP6545
1884145 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 349F L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 177-2620 Y [1] HOUSING GP-FILTER  
2. 177-2617 Y [1] BLOCK GP-HYDRAULIC  
3. 177-2625 [1] PACKING  
4. 095-1682 [1] SEAL-O-RING  
5. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
6. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
7. 419-8528 CY [1] FILTER GP-OIL (HYDRAULIC RETURN)  
8. 173-3510 [1] COVER  
9. 123-2003 [1] SEAL-O-RING  
10. 8T-4184 M [4] BOLT (M12X1.75X45-MM)  
11. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
12. 175-6178 [1] HOUSING  
13. 177-2623 [1] VALVE AS (BYPASS)  
14. 175-6174 [1] PIPE  
15. 8T-4970 M [2] BOLT (M6X1X14-MM)  
16. 175-6176 [1] SEAL-O-RING  
17. 6V-8932 M [1] SETSCREW-SOCKET (M6X1X10-MM)  
18. 095-1663 [2] SEAL-O-RING  
19. 187-7171 [2] BOLT (M8X1.25X14-MM)  
20. 175-6175 [1] PIPE  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Swing Drive Oil Level - Check
349F and 352F Excavators
Swing Drive Oil Sample - Obtain
349F and 352F Excavators
Swing Drive Oil - Change
349F and 352F Excavators
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTION AND REWORK OF THE SWING DRIVE PINION SHAFT ON CERTAIN 349D2, 349E, 349F, AND 568 EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTION AND REWORK OF THE SWING DRIVE PINION SHAFT ON CERTAIN 349D2, 349E, 349F, AND 568 EXCAVATORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Fasteners - Swing Drive and Motor
349F and 352F Excavators Machine System Specifications
Auxiliary Pump Drive and Mounting
349F and 352F Excavators Machine System Specifications
Fasteners
349F and 352F Excavators Machine System Specifications
Swing Drive - Left Swing Drive and Right Swing Drive
349F and 352F Excavators Machine System Specifications
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTION AND REWORK OF THE SWING DRIVE PINION SHAFT ON CERTAIN 349D2, 349E, 349F, AND 568 EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTION AND REWORK OF THE SWING DRIVE PINION SHAFT ON CERTAIN 349D2, 349E, 349F, AND 568 EXCAVATORS
Service Letter-Asia
Systems Operation
Swing Drive
349F and 352F Excavators Machine System
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTION AND REWORK OF THE SWING DRIVE PINION SHAFT ON CERTAIN 349D2, 349E, 349F, AND 568 EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTION AND REWORK OF THE SWING DRIVE PINION SHAFT ON CERTAIN 349D2, 349E, 349F, AND 568 EXCAVATORS
Disassembly and Assembly
Swing Motor - Disassemble
349F and 352F Excavators Machine Systems
Swing Motor - Assemble
349F and 352F Excavators Machine Systems
Swing Drive - Disassemble
349F and 352F Excavators Machine Systems
Swing Drive - Assemble
349F and 352F Excavators Machine Systems
Swing Drive - Remove and Install
349F and 352F Excavators Machine Systems
Service Magazine
A New Swing Drive and Motor are Now Used On Certain Excavators and Mobile Hydraulic Power Units {5058, 5459}
A New Swing Drive and Motor are Now Used On Certain Excavators and Mobile Hydraulic Power Units {5058, 5459}
An Improved Bolt Tightening Procedure in the Swing Drive and Mounting Group Is Now Used on 349F and 352F Excavators {5459}
An Improved Bolt Tightening Procedure in the Swing Drive and Mounting Group Is Now Used on 349F and 352F Excavators {5459}
An Improved Bolt Tightening Procedure for the Critical Joints Is Now Used on All Excavators {4050, 4164, 5459, 7063}
An Improved Bolt Tightening Procedure for the Critical Joints Is Now Used on All Excavators {4050, 4164, 5459, 7063}

Caterpillar Parts SIS Catalog 349F L :

DRIVE GP-SWING
296-6249 DRIVE GP-SWING
DRIVE & MTG GP-SWING
333-2878 DRIVE & MTG GP-SWING
DRIVE & MTG GP-SWING
333-2878 DRIVE & MTG GP-SWING
DRIVE & MTG GP-AUXILIARY PUMP
315-4440 DRIVE & MTG GP-AUXILIARY PUMP
CYLINDER GP-STICK
513-3691 CYLINDER GP-STICK
CYLINDER GP-STICK
370-6692 CYLINDER GP-STICK
CYLINDER GP-COUPLER
520-8646 CYLINDER GP-COUPLER
CYLINDER GP-COUPLER
390-0600 CYLINDER GP-COUPLER
DRIVE GP-SWING
296-6252 DRIVE GP-SWING
DRIVE GP-SWING
296-6253 DRIVE GP-SWING
DRIVE GP-SWING
418-7155 DRIVE GP-SWING
DRIVE GP-SWING
470-0474 DRIVE GP-SWING
DRIVE GP-SWING
475-1175 DRIVE GP-SWING
DRIVE GP-SWING
475-1176 DRIVE GP-SWING
FILTER & VALVE GP-PILOT
158-8987 FILTER & VALVE GP-PILOT
FILTER & VALVE GP-PILOT
158-8987 FILTER & VALVE GP-PILOT

Truck sale:

Caterpillar 349F L
 
Caterpillar 349F L
- Crawler Excavators
N C MACHINERY CO.
Caterpillar 349FL
 
Caterpillar 349FL
- Crawler Excavators
CATERPILLAR FINANCIAL SERVICES CORPORATION
Caterpillar 349FL
 
Caterpillar 349FL
- Crawler Excavators
BOYD CAT COMPANY
Caterpillar 349FL
 
Caterpillar 349FL
- Crawler Excavators
BOYD CAT COMPANY
Caterpillar 349FL
 
Caterpillar 349FL
- Crawler Excavators
BOYD CAT COMPANY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.