ELECTRICAL AND STARTING SYSTEM
HARNESS GPELECTRICAL AND STARTING SYSTEM
HARNESS GP
#SEBP65870420
243-5282: HARNESS AS-SENSOR
243-5282 HARNESS AS-SENSOR -EXHAUST
S/N E6N1-UP
PART OF 192-4134, 394-2306, 555-7606 WIRING GP-PYROMETER
AN ATTACHMENT
S/N E6N1-UP
PART OF 192-4134, 394-2306, 555-7606 WIRING GP-PYROMETER
AN ATTACHMENT
For full view, you need register
Parts for your G3516 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 4P-4892 | [1] | BUSHING-TERMINAL | ||
| 6I-0921 | [1] | FITTING-CABLE (1-IN) | ||
| 155-2270 | [8] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG ASSEMBLY & WEDGE) | ||||
| 104-3651 | [1] | LOCKNUT (1-11-1/2 NPT THD) | ||
| 192-6549 | [1] | PLATE | ||
| 160-7689 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 8T-6342 E | TUBE-HEAT SHRINK (3.2-MM DIA)(72-CM) | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP65870421
131-9322: HARNESS AS-SOLENOID
131-9322 HARNESS AS-SOLENOID -FUEL SHUTOFF
S/N E6N1-UP
PART OF 387-7397 VALVE GP-SOLENOID
AN ATTACHMENT
S/N E6N1-UP
PART OF 387-7397 VALVE GP-SOLENOID
AN ATTACHMENT
For full view, you need register
Parts for your G3516 GENERATOR SET:
CATERPILLAR SIS#SEBP65870422
130-4618: HARNESS AS-WIRING
130-4618 HARNESS AS-WIRING -RECTIFIER
S/N 5ZA865-UP; 8ZD1150-UP
PART OF 130-4616 HEAT SINK AS
FOR USE WITH HEAT SINK ASSEMBLIES
FIELD INSTALLATION
S/N 5ZA865-UP; 8ZD1150-UP
PART OF 130-4616 HEAT SINK AS
FOR USE WITH HEAT SINK ASSEMBLIES
FIELD INSTALLATION
For full view, you need register
Parts for your G3516 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP65870423
166-8370: HARNESS AS-WIRING
166-8370 HARNESS AS-WIRING -GOVERNOR
S/N E6N1-UP
FOR USE WITH PACKAGES WITHOUT EMCPII PANEL OPTION
AN ATTACHMENT
S/N E6N1-UP
FOR USE WITH PACKAGES WITHOUT EMCPII PANEL OPTION
AN ATTACHMENT
For full view, you need register
Parts for your G3516 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP65870424
166-8371: HARNESS AS-WIRING
166-8371 HARNESS AS-WIRING -ENGINE STARTING
S/N E6N1-UP
PART OF 420-2419 WIRING GP-ELECTRIC STARTING
AN ATTACHMENT
S/N E6N1-UP
PART OF 420-2419 WIRING GP-ELECTRIC STARTING
AN ATTACHMENT
For full view, you need register
Parts for your G3516 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 8L-8413 | [11] | STRAP-CABLE (WHITE) | ||
| 109-3038 | [2] | END-WIRE (16-GA) | ||
| 113-8961 | [9] | END-WIRE (10-GA) | ||
| 2L-8065 | [2] | TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW) | ||
| 128-4178 | [5] | TERMINAL AS | ||
| 2L-8068 | [1] | TERMINAL-RING (10-GA TO 12-GA, 5/16-IN SCREW) | ||
| 5P-6006 D | TUBE-HEAT SHRINK (9.52-MM DIA)(0.1-M) | |||
| 2L-8075 | [6] | TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 165-6564 | [1] | RECEPTACLE AS | ||
| D | ORDER BY THE METER | |||
#SEBP65870425
240-6833: HARNESS AS-WIRING
240-6833 HARNESS AS-WIRING -AC, LOW VOLTAGE GENERATOR
S/N 5ZA865-UP; 8ZD1150-UP; E6N1-UP
FOR USE WITH LOW VOLTAGE GENERATOR
AN ATTACHMENT
S/N 5ZA865-UP; 8ZD1150-UP; E6N1-UP
FOR USE WITH LOW VOLTAGE GENERATOR
AN ATTACHMENT
For full view, you need register
Parts for your G3516 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 5N-9117 | [1] | ADAPTER | ||
| 5N-9072 | [1] | CLIP | ||
| 5N-9067 | [1] | COLLAR | ||
| 109-3038 | [6] | END-WIRE (16-GA) | ||
| 062-5388 | [1] | LOCKNUT (1-11-1/2-THD) | ||
| 8L-8413 | [28] | STRAP-CABLE (WHITE) | ||
| 2L-8081 | [4] | TERMINAL-RING (14-GA TO 16-GA, 1/2-IN SCREW) | ||
| 2L-8076 | [5] | TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW) | ||
| 5P-1475 | [9] | TERMINAL-FORK (14-GA TO 16-GA, NO. 8 SCREW) |
#SEBP65870426
240-6834: HARNESS AS-WIRING
240-6834 HARNESS AS-WIRING -AC, MEDIUM VOLTAGE GENERATOR
S/N 5ZA865-UP; 8ZD1150-UP; E6N1-UP
FOR USE WITH MEDIUM VOLTAGE GENERATOR
AN ATTACHMENT
S/N 5ZA865-UP; 8ZD1150-UP; E6N1-UP
FOR USE WITH MEDIUM VOLTAGE GENERATOR
AN ATTACHMENT
For full view, you need register
Parts for your G3516 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 5N-9117 | [1] | ADAPTER | ||
| 5N-9072 | [1] | CLIP | ||
| 5N-9067 | [1] | COLLAR | ||
| 109-3038 | [10] | END-WIRE (16-GA) | ||
| 062-5388 | [1] | LOCKNUT (1-11-1/2-THD) | ||
| 8L-8413 | [28] | STRAP-CABLE (WHITE) | ||
| 2L-8076 | [5] | TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW) | ||
| 5P-1475 | [9] | TERMINAL-FORK (14-GA TO 16-GA, NO. 8 SCREW) |
#SEBP65870427
242-3100: HARNESS AS-WIRING
242-3100 HARNESS AS-WIRING -GENERATOR TERMINAL STRIP
S/N 5ZA865-UP; 8ZD1150-UP; E6N1-UP
PART OF 241-3378, 242-7960 WIRING GP-GENERATOR
AN ATTACHMENT
S/N 5ZA865-UP; 8ZD1150-UP; E6N1-UP
PART OF 241-3378, 242-7960 WIRING GP-GENERATOR
AN ATTACHMENT
For full view, you need register
Parts for your G3516 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 8C-6354 | [1] | CAP-RECEPTACLE (ET CONNECTOR) | ||
| 109-3038 | [24] | END-WIRE (16-GA) | ||
| 244-0452 | [27] | END-WIRE (14-GA TO 20-GA) | ||
| 174-0503 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 8T-8729 | [5] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 234-1856 | [1] | PLUG-CONNECTOR (6-PIN) | ||
| 234-1857 | [1] | PLUG-CONNECTOR (9-PIN) | ||
| 234-1858 | [1] | PLUG-CONNECTOR (12-PIN) | ||
| 8T-8736 | [1] | RECEPTACLE-CONNECTOR (9-PIN) | ||
| 134-2540 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 246-7013 | [1] | SEAL (6-POSITION) | ||
| 246-7014 | [1] | SEAL (9-POSITION) | ||
| 246-7015 | [1] | SEAL (12-POSITION) | ||
| 8T-8730 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8L-8413 | [7] | STRAP-CABLE (WHITE) | ||
| 9X-8243 E | TUBE-HEAT SHRINK (39.9-MM DIA)(5-CM) | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP65870428
242-3104: HARNESS AS-WIRING
242-3104 HARNESS AS-WIRING -GENERATOR TERMINAL STRIP
S/N 5ZA865-UP; 8ZD1150-UP; E6N1-UP
PART OF 242-7961 WIRING GP-GENERATOR
AN ATTACHMENT
S/N 5ZA865-UP; 8ZD1150-UP; E6N1-UP
PART OF 242-7961 WIRING GP-GENERATOR
AN ATTACHMENT
For full view, you need register
Parts for your G3516 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 8C-6354 | [1] | CAP-RECEPTACLE (ET CONNECTOR) | ||
| 8L-8413 | [5] | STRAP-CABLE (WHITE) | ||
| 8T-8729 | [5] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [5] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8736 | [1] | RECEPTACLE-CONNECTOR (9-PIN) | ||
| 9X-8243 E | TUBE-HEAT SHRINK (39.9-MM DIA)(5-CM) | |||
| 109-3038 | [22] | END-WIRE (16-GA) | ||
| 134-2540 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 153-2707 E | CABLE-ELECTRICAL (2-CONDUCTOR, 18-GA)(67-CM) | |||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 174-0503 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 234-1856 | [1] | PLUG-CONNECTOR (6-PIN) | ||
| 234-1857 | [1] | PLUG-CONNECTOR (9-PIN) | ||
| 234-1858 | [1] | PLUG-CONNECTOR (12-PIN) | ||
| 244-0452 | [27] | END-WIRE (14-GA TO 20-GA) | ||
| 246-7013 | [1] | SEAL (6-POSITION) | ||
| 246-7014 | [1] | SEAL (9-POSITION) | ||
| 246-7015 | [1] | SEAL (12-POSITION) | ||
| E | ORDER BY THE CENTIMETER | |||
#SEBP65870429
243-4271: HARNESS AS-WIRING
243-4271 HARNESS AS-WIRING -GENERATOR TERMINAL STRIP
S/N 5ZA865-UP; 8ZD1150-UP
PART OF 243-4285 WIRING GP-GENERATOR
AN ATTACHMENT
S/N 5ZA865-UP; 8ZD1150-UP
PART OF 243-4285 WIRING GP-GENERATOR
AN ATTACHMENT
For full view, you need register
Parts for your G3516 GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 244-0452 | [24] | END-WIRE (14-GA TO 20-GA) | ||
| 234-1856 | [1] | PLUG-CONNECTOR (6-PIN) | ||
| 234-1857 | [1] | PLUG-CONNECTOR (9-PIN) | ||
| 234-1858 | [1] | PLUG-CONNECTOR (12-PIN) | ||
| 246-7013 | [1] | SEAL (6-POSITION) | ||
| 246-7014 | [1] | SEAL (9-POSITION) | ||
| 246-7015 | [1] | SEAL (12-POSITION) | ||
| 8L-8413 | [7] | STRAP-CABLE (WHITE) |
Information:
ELECTRICAL AND STARTING SYSTEM
HARNESS GP
Special Instruction
Procedure to Replace Armature of Starter Motor On All Cat<SUP>®</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>®</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Tool Operating Manual
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Caterpillar Parts SIS Catalog G3516 :
Truck sale:
59,000 USD
