AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

380-0834 MOUNTING GP-INSTRUMENT PANEL -LH S/N ED51-UP AN ATTACHMENT 3512B GENERATOR SET


OPERATOR STATION
PANEL GP
PYROMETER GP
SERVICE EQUIPMENT AND SUPPLIES
CHARTS & FILMS

GENERATOR SET 3512B GENERATOR SET ED5
 3512B Generator Set ED500001-UP SEBP6591 3512B ED5   (2014)

OPERATOR STATION

PANEL GP
MODULE GP-SYSTEM COMMUNICATION
188-3080 MODULE GP-SYSTEM COMMUNICATION
MOUNTING GP-CONTROL PANEL
104-4704 MOUNTING GP-CONTROL PANEL
MOUNTING GP-INSTRUMENT PANEL
380-0834 MOUNTING GP-INSTRUMENT PANEL
MOUNTING GP-INSTRUMENT PANEL
384-3637 MOUNTING GP-INSTRUMENT PANEL
MOUNTING GP-INSTRUMENT PANEL
393-9276 MOUNTING GP-INSTRUMENT PANEL
MOUNTING GP-INSTRUMENT PANEL
397-8928 MOUNTING GP-INSTRUMENT PANEL
 

#SEBP65910890
 

380-0834: MOUNTING GP-INSTRUMENT PANEL

380-0834 MOUNTING GP-INSTRUMENT PANEL -LH
S/N ED51-UP
AN ATTACHMENT
i04979515 SEBP6591
3800834 MOUNTING GP-INSTRUMENT PANEL Parts scheme
  For full view, you need register

Parts for your 3512B GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 107-2853 [1] BRACKET AS  
  030-8967 [1] STUD-WELD (3/8-16X0.75-IN OAL)  
2. 7B-8167 [8] BOLT (1/4-20X1.625-IN)  
3. 5P-0537 [9] WASHER-HARD (7.2X14.5X2-MM THK)  
4. 2W-8604 [8] WASHER (6.5X35X1.5-MM THK)  
5. 5M-2894 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
6. 119-5659 [2] BRACKET  
7. 1A-2029 [4] BOLT (3/8-16X1.125-IN)  
8. 9S-8750 [9] NUT-FULL (1/4-20-THD)  
9. 1H-6936 [1] WIRE AS  
10. 1W-8129 [2] SUPPORT  
11. 1A-5964 [4] BOLT (3/8-16X4.5-IN)  
12. 136-5923 [2] HINGE AS  
13. 9S-8752 [1] NUT-FULL (3/8-16-THD)  
14. 165-3931 [4] BOLT (3/8-16X1.75-IN)  
15. 283-8650 [4] WASHER-HARD (10.2X18.5X5-MM THK)  
 

#SEBP65910891
 

384-3637: MOUNTING GP-INSTRUMENT PANEL

384-3637 MOUNTING GP-INSTRUMENT PANEL
S/N ED51-UP
AN ATTACHMENT
i05045573 SEBP6591
3843637 MOUNTING GP-INSTRUMENT PANEL Parts scheme
  For full view, you need register

Parts for your 3512B GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-8129 [2] SUPPORT  
2. 2W-8604 [6] WASHER (6.5X35X1.5-MM THK)  
3. 481-3042 [2] BRACKET  
4. 422-7605 [1] BRACKET AS  
5. 0L-1351 [2] BOLT (3/8-16X0.875-IN)  
6. 0S-1588 [4] BOLT (3/8-16X1.25-IN)  
7. 1A-5964 [4] BOLT (3/8-16X4.5-IN)  
8. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 5P-0537 [6] WASHER-HARD (7.2X14.5X2-MM THK)  
10. 7B-8167 [6] BOLT (1/4-20X1.625-IN)  
11. 9S-8750 [6] NUT-FULL (1/4-20-THD)  
12. 9S-8752 [4] NUT-FULL (3/8-16-THD)  
13. 9X-6458 [6] WASHER-HARD (10.2X22.5X3-MM THK)  
14. 165-3929 [4] BOLT (3/8-16X1.5-IN)  
 

#SEBP65910892
 

393-9276: MOUNTING GP-INSTRUMENT PANEL

393-9276 MOUNTING GP-INSTRUMENT PANEL
S/N ED51-UP
AN ATTACHMENT
i05000562 SEBP6591
3939276 MOUNTING GP-INSTRUMENT PANEL Parts scheme
  For full view, you need register

Parts for your 3512B GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-8129 [2] SUPPORT  
2. 2W-8604 [6] WASHER (6.5X35X1.5-MM THK)  
3. 481-3042 [2] BRACKET  
4. 422-7605 [1] BRACKET AS  
5. 0L-1351 [2] BOLT (3/8-16X0.875-IN)  
6. 0S-1588 [4] BOLT (3/8-16X1.25-IN)  
7. 1A-5964 [4] BOLT (3/8-16X4.5-IN)  
8. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 5P-0537 [6] WASHER-HARD (7.2X14.5X2-MM THK)  
10. 7B-8167 [6] BOLT (1/4-20X1.625-IN)  
11. 9S-8750 [6] NUT-FULL (1/4-20-THD)  
12. 9S-8752 [4] NUT-FULL (3/8-16-THD)  
13. 9X-6458 [6] WASHER-HARD (10.2X22.5X3-MM THK)  
14. 165-3929 [4] BOLT (3/8-16X1.5-IN)  
 

#SEBP65910893
 

397-8928: MOUNTING GP-INSTRUMENT PANEL

397-8928 MOUNTING GP-INSTRUMENT PANEL
S/N ED51-UP
AN ATTACHMENT
i04997170 SEBP6591
3978928 MOUNTING GP-INSTRUMENT PANEL Parts scheme
  For full view, you need register

Parts for your 3512B GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 107-2853 [1] BRACKET AS  
  8F-9836 [2] BOSS (3/8-16-THD)  
  1F-0750 [4] NUT-WELD (3/8-16-THD)  
  030-8967 [1] STUD-WELD (3/8-16X0.75-IN OAL)  
2. 7B-8167 [4] BOLT (1/4-20X1.625-IN)  
3. 5P-0537 [9] WASHER-HARD (7.2X14.5X2-MM THK)  
4. 2W-8604 [8] WASHER (6.5X35X1.5-MM THK)  
5. 5M-2894 [7] WASHER-HARD (10.2X18.5X2.5-MM THK)  
6. 119-5659 [2] BRACKET  
7. 1A-2029 [4] BOLT (3/8-16X1.125-IN)  
8. 9S-8750 [9] NUT-FULL (1/4-20-THD)  
9. 1H-6936 [1] WIRE AS  
10. 1W-8129 [2] SUPPORT  
11. 1A-5964 [4] BOLT (3/8-16X4.5-IN)  
12. 136-5923 [2] HINGE AS  
13. 9S-8752 [1] NUT-FULL (3/8-16-THD)  
14. 0S-1571 [4] BOLT (3/8-16X1.75-IN)  
15. 8B-2377 [4] BOLT (1/4-20X2-IN)  
 

#SEBP65910894
 

515-7784: MOUNTING GP-INSTRUMENT PANEL

515-7784 MOUNTING GP-INSTRUMENT PANEL
S/N ED51-UP
AN ATTACHMENT
i06747144 SEBP6591
5157784 MOUNTING GP-INSTRUMENT PANEL Parts scheme
  For full view, you need register

Parts for your 3512B GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1S-2342 [1] STRAP AS-GROUND  
2. 389-0242 [1] BRACKET AS  
3. 389-0243 [1] BRACKET AS  
4. 189-5359 [5] WASHER-HARD (10.5X28.5X5-MM THK)  
5. 1V-7753 [8] SPACER (0.546X0.841X1.75-IN THK)  
6. 4L-9337 [5] BOLT (3/8-16X1.5-IN)  
7. 5P-1075 [16] WASHER-HARD (10.2X22.5X3-MM THK)  
8. 6V-4432 [8] BOLT (1/2-13X4-IN)  
9. 6V-8188 [8] NUT (1/2-13-THD)  
10. 6V-8801 [10] NUT (3/8-16-THD)  
11. 7X-3391 [16] WASHER-HARD (13.5X32X6-MM THK)  
12. 8T-2501 [8] BOLT (3/8-16X2-IN)  
13. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
 

#SEBP65910895
 

320-1336: PANEL GP-ANNUNCIATOR

320-1336 PANEL GP-ANNUNCIATOR -ENGINE MOUNTED
S/N ED51-UP
AN ATTACHMENT
i02988848 SEBP6591
3201336 PANEL GP-ANNUNCIATOR Parts scheme 3201336 PANEL GP-ANNUNCIATOR Parts scheme
  For full view, you need register

Parts for your 3512B GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 325-4735 [1] ENCLOSURE AS  
2. 180-4543 [1] PANEL  
3. 147-1960 E RAIL (37.5-CM)  
4. 9X-9616 [1] COVER-END  
5. 564-5691 [1] RELAY (VOLTAGE SENSING)  
6. 189-4774 [1] BASE-RELAY  
7. 206-1576 [4] BRACKET  
8. 9X-9614 [25] TERMINAL (SINGLE)  
9. 135-6740 [1] BLOCK-DIODE  
10. 3E-0357 [1] DIODE AS  
11. 183-8023 [2] MOUNTING-SHOCK  
12. 8T-4205 [8] WASHER-HARD (7.2X14.5X2-MM THK)  
13. 3E-9865 [8] LOCKNUT (1/4-20-THD)  
15. 7C-6121 [2] MOUNT-FLEXIBLE  
16. 131-5374 [2] MODULE AS (ANNUNCIATOR)  
17. 131-5377 [1] FLASHER AS (CONTROL)  
18. 125-9941 [2] BASE-LAMP  
19. 125-9942 [2] LENS (AMBER)  
20. 125-9956 [2] LAMP-LED (24-VOLT, AMBER)  
21. 125-9945 [1] SWITCH-ROTARY (3-POSITION, MOMENTARY)(ALARM TEST)  
22. 111-1324 [1] BLOCK-CONTACT (1-POLE)  
23. 111-1323 [1] BLOCK-CONTACT (1-POLE)  
24. 138-4959 [1] CIRCUIT BREAKER AS (5-AMPERE)  
25. 134-0957 [1] COVER-BLOCK  
26. 3E-5504 [2] BAR-FIXED BRIDGE  
27. 109-6539 [5] PLATE-SEPARATOR  
28. 320-1337 [1] HARNESS AS-PANEL (ANNUNCIATOR)  
  8L-8413 [90] STRAP-CABLE (WHITE)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [1] PLUG-SEAL  
  9X-4813 [1] RECEPTACLE AS-CONNECTOR (3-PIN)  
  109-3038 [72] END-WIRE (16-GA)  
  121-0199 E WRAP-SPIRAL (3/8-IN OD)(40-CM)  
  5P-2321 [4] TERMINAL-FORK (14-GA TO 16-GA, NO. 6 SCREW)  
  207-5432 [4] TERMINAL-BLADE (14-GA TO 16-GA)  
29. 304-5240 [1] FILM-PANEL (ANNUNCIATOR)  
30. 6V-2480 [4] SCREW (4-40X0.5-IN)  
31. 6B-4540 [4] NUT (4-40-THD)  
32. 6B-4542 [4] LOCKWASHER  
33. 203-8944 [1] GASKET  
34. 8T-8737 [1] PLUG-SEAL  
35. 276-4138 [2] FILM-IDENTIFICATION (TERMINAL MARKER)  
36. 325-2876 [2] MARKER-TERMINAL  
37. 325-2877 [2] MARKER-TERMINAL  
38. 1H-4393 [4] LOCKWASHER  
39. 4B-4863 [4] WASHER (4.7X11X1.2-MM THK)  
40. 178-3339 [4] SCREW (8-32X0.5-IN)  
  E   ORDER BY THE CENTIMETER
 

#SEBP65910896
 

357-0346: PANEL GP-ANNUNCIATOR

357-0346 PANEL GP-ANNUNCIATOR -ENGINE MOUNTED
S/N ED51-UP
AN ATTACHMENT
i03931530 SEBP6591
3570346 PANEL GP-ANNUNCIATOR Parts scheme 3570346 PANEL GP-ANNUNCIATOR Parts scheme
  For full view, you need register

Parts for your 3512B GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 325-4735 [1] ENCLOSURE AS  
2. 180-4543 [1] PANEL  
3. 147-1960 E RAIL (3.8-CM)  
4. 9X-9616 [1] COVER-END  
5. 564-5691 [1] RELAY (VOLTAGE SENSING)  
6. 189-4774 [1] BASE-RELAY  
7. 206-1576 [4] BRACKET  
8. 9X-9614 [25] TERMINAL (SINGLE)  
9. 135-6740 [1] BLOCK-DIODE  
10. 3E-0357 [1] DIODE AS  
11. 183-8023 [2] MOUNTING-SHOCK  
12. 8T-4205 [8] WASHER-HARD (7.2X14.5X2-MM THK)  
13. 3E-9865 [8] LOCKNUT (1/4-20-THD)  
14. 7C-6121 [2] MOUNT-FLEXIBLE  
15. 131-5374 [2] MODULE AS (ANNUNCIATOR)  
16. 131-5377 [1] FLASHER AS (CONTROL)  
17. 125-9941 [2] BASE-LAMP  
18. 125-9942 [2] LENS (AMBER)  
19. 125-9956 [2] LAMP-LED (24-VOLT, AMBER)  
20. 125-9945 [1] SWITCH-ROTARY (3-POSITION, MOMENTARY)(ALARM TEST)  
21. 111-1324 [1] BLOCK-CONTACT (1-POLE)  
22. 111-1323 [1] BLOCK-CONTACT (1-POLE)  
23. 138-4959 [1] CIRCUIT BREAKER AS (5-AMPERE)  
24. 134-0957 [1] COVER-BLOCK  
25. 3E-5504 [2] BAR-FIXED BRIDGE  
26. 109-6539 [5] PLATE-SEPARATOR  
27. 320-1337 [1] HARNESS AS-PANEL (ANNUNCIATOR)  
  8L-8413 [90] STRAP-CABLE (WHITE)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [1] PLUG-SEAL  
  9X-4813 [1] RECEPTACLE AS-CONNECTOR (3-PIN)  
  109-3038 [72] END-WIRE (16-GA)  
  121-0199 E WRAP-SPIRAL (3/8-IN OD)(40-CM)  
  5P-2321 [4] TERMINAL-FORK (14-GA TO 16-GA, NO. 6 SCREW)  
  207-5432 [4] TERMINAL-BLADE (14-GA TO 16-GA)  
28. 304-5240 [1] FILM-PANEL (ANNUNCIATOR)  
29. 6V-2480 [4] SCREW (4-40X0.5-IN)  
30. 6B-4540 [4] NUT (4-40-THD)  
31. 6B-4542 [4] LOCKWASHER  
32. 203-8944 [1] GASKET  
33. 8T-8737 [1] PLUG-SEAL  
34. 276-4138 [2] FILM-IDENTIFICATION (TERMINAL MARKER)  
35. 325-2876 [2] MARKER-TERMINAL  
36. 325-2877 [2] MARKER-TERMINAL  
37. 1H-4393 [4] LOCKWASHER  
38. 4B-4863 [4] WASHER (4.7X11X1.2-MM THK)  
39. 178-3339 [4] SCREW (8-32X0.5-IN)  
  E   ORDER BY THE CENTIMETER
 

#SEBP65910897
 

273-5046: PANEL GP-ELECTRONIC

273-5046 PANEL GP-ELECTRONIC
S/N ED51-UP
SINGLE POINT
PART OF 270-1481 CONTROL GP-ELECTRONIC
AN ATTACHMENT
i02844793 SEBP6591
2735046 PANEL GP-ELECTRONIC Parts scheme 2735046 PANEL GP-ELECTRONIC Parts scheme 2735046 PANEL GP-ELECTRONIC Parts scheme
  For full view, you need register

Parts for your 3512B GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-0357 [2] DIODE AS  
2. 8C-5607 [8] MOUNT-ISOLATION  
3. 8C-5608 [4] SPACER (6.5X9.5X25.4-MM THK)  
4. 8C-6354 [1] CAP-RECEPTACLE (ET CONNECTOR)  
5. 9X-6772 [20] STRAP-CABLE  
6. 107-2482 [6] GASKET  
7. 110-8909 [6] MOUNT-FLEXIBLE  
8. 135-6740 [2] BLOCK-DIODE  
9. 204-5594 [1] RELAY (24-VOLT)(ALARM)  
10. 206-1576 [4] BRACKET  
11. 225-0547 [97] BLOCK-TERMINAL  
12. 225-0548 [2] COVER  
13. 225-0906 [3] BRIDGE (2-POSITION)  
14. 225-0907 [2] BRIDGE (3-POSITION)  
15. 214-4208 [1] RECEPTACLE AS-CONNECTOR (70-PIN)  
16. 233-9517 [1] GASKET  
17. 235-2761 [1] GASKET  
18. 244-9613 [1] GASKET  
19. 252-7556 Y [1] COVER GP-CONTROL PANEL (ANNUNCIATOR)  
20. 256-7512 Y [1] CONTROL GP-COMMUNICATION (PL1000E)  
21. 273-5065 [1] PANEL AS-BOX  
  7M-7794 [6] STUD-WELD (9.4X21.5X25.5-MM)  
  147-1960 [1] RAIL  
22. 299-3960 C [1] HARNESS AS-PANEL  
  8T-8729 [7] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [20] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [14] PLUG-SEAL  
  9W-1951 [1] RECEPTACLE-CONNECTOR (9-PIN)  
  109-3038 [90] END-WIRE (16-GA)  
  155-2265 [4] KIT-CONNECTING PLUG (8-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  233-9216 [1] RECEPTACLE (85-PIN)  
  233-9226 [85] PIN-CONNECTOR (16-GA TO 20-GA)  
23. 273-5069 [1] HARNESS AS-PANEL (DATA LINK)  
  218-4935 [2] SUPPRESSOR-ARC  
  9X-6772 [6] STRAP-CABLE  
  186-3736 [4] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  9X-3402 [8] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [8] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  160-7690 [1] PLUG AS-CONNECTOR (70-PIN)  
  159-9322 [1] SEAL-O-RING  
  8T-8737 [62] PLUG-SEAL  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  109-3038 [8] END-WIRE (16-GA)  
24. 281-7750 [1] KIT-MARKER  
    (INCLUDES TERMINAL MARKERS)
25. 283-9289 Y [1] ENCLOSURE AS  
26. 283-9290 [4] BRACKET AS  
27. 290-2927 [1] TERMINAL  
28. 290-6036 [1] LAMP AS-STROBE (24-VOLT, RED)  
29. 292-3532 [1] HARNESS AS-WIRING (STROBE LIGHT)  
  109-3038 [4] END-WIRE (16-GA)  
30. 129-3178 M [4] LOCKNUT (M6X1-THD)  
31. 0S-1615 [8] BOLT (1/4-20X0.75-IN)  
32. 096-5962 [8] WASHER-HARD (3.4X7X0.8-MM THK)  
33. 6B-4540 [8] NUT (4-40-THD)  
34. 4B-4863 [24] WASHER (4.7X11X1.2-MM THK)  
35. 4P-7581 [6] CLIP (LADDER)  
36. 4P-8134 [9] CLIP (LADDER)  
37. 5M-2894 [11] WASHER-HARD (10.2X18.5X2.5-MM THK)  
38. 5P-0537 [12] WASHER-HARD (7.2X14.5X2-MM THK)  
39. 5P-2452 [4] SCREW-MACHINE (1/4-20X1.75-IN)  
40. 6D-5801 [24] LOCKNUT (8-32-THD)  
41. 6V-2480 [8] SCREW (4-40X0.5-IN)  
42. 6V-5683 M [4] BOLT (M6X1X16-MM)  
43. 7S-1197 [24] SCREW-MACHINE (8-32X0.5-IN)  
44. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
45. 178-7879 [4] SEAL-WASHER  
46. 5S-0003 [4] NUT (5/16-18-THD)  
47. 9S-8752 [11] NUT-FULL (3/8-16-THD)  
48. 9X-6165 [4] WASHER (6.5X22X2.5-MM THK)  
49. 283-9483 Y [1] ALARM GP  
50. 304-8609 [1] HARNESS AS-PANEL (RESISTOR)  
  8T-8730 [3] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  110-8714 [3] END-WIRE (18-GA)  
  174-0503 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
51. 134-2540 [1] RECEPTACLE AS-CONNECTOR (3-PIN)  
52. 234-5925 [1] GASKET  
53. 134-0957 [1] COVER-BLOCK  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP65910898
 

195-0383: PYROMETER GP

195-0383 PYROMETER GP
S/N ED51-UP
EXHAUST GAS TEMPERATURE SCANNER
AN ATTACHMENT
i01938360 SEBP6591
1950383 PYROMETER GP Parts scheme
  For full view, you need register

Parts for your 3512B GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

#SEBP65910899
 

6L-4502: CHART-PLATE & FILM

6L-4502 CHART-PLATE & FILM
S/N ED51-UP
i05567729 SEBP6591
  For full view, you need register

Parts for your 3512B GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  [1] FILM GP  
    CONTACT YOUR LOCAL DEALER.
    INSTALL FILM ON THE TOP OF THE RH REAR VALVE COVER, READABLE FROM THE FRONT OF THE ENGINE. IF THAT COVER IS NOT
    AVAILABLE, MOVE FILM FORWARD & INSTALL ON TOP OF THE FIRST AVAILABLE VALVE COVER, READABLE FROM THE FRONT.
    INSTALL CLEAR LAMINATE OVER FILM.
  [1] FILM-IDENTIFICATION (CERTIFICATION)  
    CONTACT YOUR LOCAL DEALER.
    INSTALL FILM ON THE RH REAR VALVE COVER, VISIBLE FROM THE SIDE OF THE ENGINE. IF THAT VALVE COVER IS NOT AVAILABLE,
    MOVE FILM FORWARD TO THE NEXT AVAILABLE VALVE COVER, VISIBLE FROM THE SIDE OF THE ENGINE.
  250-3444 [1] FILM-INFORMATION (STANDARD ROTATION)  
    INSTALL FILM ON THE LH CAM GEAR COVER IN A VISIBLE LOCATION. IF THAT COVER IS NOT AVAILABLE,
    MOVE TO THE RH CAM GEAR COVER.
  225-3226 [2] FILM-WARNING (HOT SURFACE)  
    INSTALL FILMS ON CY. #9 & #10 ROCKER BASES. IF THSE BASES ARE NOT VISIBLE, MOVE FILMS TO THE FIRST VISIBLE ROCKER BASES
  225-3227 [2] FILM-WARNING (HOT SURFACE)  
    INSTALL ONE FILM ON THE RH SIDE ON THE OIL COOLER, ABOVE THE DIPSTICK, & ONE FILM ON THE LH SIDE OF THE ENGINE,
    ON CRANKCASE COVER NEAR THE MIDLINE OF THE ENGINE. BOTH FILMS SHOULD BE VISIBLE FROM THE SIDE OF THE ENGINE.
  228-3369 [4] FILM-WARNING (DO NOT OPERATE, READ OMM)  
    INSTALL FILM ON CYLS. #1, #2, #11 & #12 ROCKER BASES.
    IF THESE BASES ARE NOT VISIBLE, MOVE FILM TO THE FIRST VISIBLE ROCKER BASE.
  233-6084 [2] FILM-WARNING (FIRE, STOP ENGINE, DO NOT OPEN)  
    INSTALL ONE FILM ON THE RH & LH SIDES OF THE ENGINE NEAR THE TOP OF THE CRANKCASE COVERS NEAREST THE CENTERLINE OF
    THE ENGINE VISIBLE FROM THE SIDE OF THE ENGINE. DO NOT INSTALL ON THE EXPLOSION RELIEF VALVES.
  308-4479 [2] FILM-WARNING (NO WELD, READ OMM)  
    INSTALL ONE FILM ON EACH SIDE OF THE ENGINE, ONE FILM ON TOP OF THE POWER DISTRIBUTION BOX, & ONE FILM ON THE
    OPPOSITE SIDE OF THE ENGINE, CENTERED ON THE FIRST VISIBLE SIDE COVER FROM THE REAR OF THE ENGINE. IF THERE IS NO POWER
    DISTRIBUTION BOX, INSTALL BOTH FILMS ON THE FIRST VISIBLE SIDE COVER FROM THE REAR.
  115-5852 [1] PLATE & FILM GP (ENGINE INFORMATION)  
    CONTACT YOUR LOCAL DEALER.
    INSTALL FILM ON THE LH, FRONT, LOWER HEAD FACE OF THE BLOCK BETWEEN CYL #2 & THE FRONT HOUSING,
    READABLE FROM THE REAR OF ENGINE.
    INSTALL CLEAR LAMINATE OVER FILM.
  298-5631 [2] PLATE-IDENTIFICATION (CAT)  
    INSTALL ONE ON RH REAR CAM COVER & ONE ON THE LH FRONT CAM COVER IF VISIBLE.
    IF EITHER PRIMARY LOCATION IS NOT VISIBLE, INSTALL PLATE ON THE NEXT VISIBLE CAM COVER LOCATION
    ON THAT SIDE OF THE ENGINE.
  3N-3790 [1] PLATE-SERIAL NUMBER (ENGINE)  
    CONTACT YOUR LOCAL DEALER.
    REFLATTEN AFTER STAMPING.
    INSTALL ON LH SIDE OF BLOCK NEAR REAR FACE ON CAMSHAFT COMPARTMENT USING 7B3028 DRIVE SCREWS.
    STAMP SERIAL NUMBER IN BLOCK JUST BELOW PLATE IN FIGURES 6 HIGH.
  7B-3028 [2] SCREW-DRIVE (NO 4X 3/16-IN)  
 

Information:

Engine News
Correction to Testing and Adjusting Module, SENR5832, Electronic Modular Control Panel II+ (EMCPII+) for MUI Engines {4490}
2000/12/01
Correction to Testing and Adjusting, "Electronic Modular Control Panel II+ (EMCPII+) for MUI Engines" {4490}
2002/02/01
Switchgear Fusing Option {1417, 4491}
2008/12/01
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Special Instruction
EMCP 3 to EMCP 4.1/4.2 Cat <SUP>&reg;</SUP> Retrofit Instructions{4490}
EMCP 3 to EMCP 4.1/4.2 Cat ® Retrofit Instructions{4490}
Procedure to Upgrade EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.3{4490}
Procedure to Upgrade EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.3{4490}
Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.4 {4490}
Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.4 {4490}
Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.2 {4490, 7451}
Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.2 {4490, 7451}
Instructions for Installing AssetIQ<SUP>TM</SUP> for Commercial Generator Set Systems on Caterpillar and non-Caterpillar Products {4450, 7490}
Instructions for Installing AssetIQTM for Commercial Generator Set Systems on Caterpillar and non-Caterpillar Products {4450, 7490}
Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.2 {4490, 7610}
Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.2 {4490, 7610}
Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.2B {1408, 4490, 7418, 7426, 7451}
Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.2B {1408, 4490, 7418, 7426, 7451}
Systems Operation
Features
Product Link For Generator Sets
Parameters
Product Link For Generator Sets
Service Magazine
Annunciator Film Kit Is Now Available for EMCP 4 On Cat Generator Sets {4490, 7400}
2010/11/29
Service Meter Adjustment Is Now Available in VisionLink<SUP>TM</SUP> {7478, 7606}
2014/08/20

Caterpillar Parts SIS Catalog 3512B :

MOUNTING GP-CONTROL PANEL
104-4704 MOUNTING GP-CONTROL PANEL
MODULE GP-SYSTEM COMMUNICATION
188-3080 MODULE GP-SYSTEM COMMUNICATION
MODULE GP-SYSTEM COMMUNICATION
164-8940 MODULE GP-SYSTEM COMMUNICATION
MODULE GP-SYSTEM COMMUNICATION
102-8627 MODULE GP-SYSTEM COMMUNICATION
MODULE GP-RELAY DRIVER
123-7450 MODULE GP-RELAY DRIVER
303-5893 MODULE GP-ALARM
FILTER GP-ELECTRONIC
145-7571 FILTER GP-ELECTRONIC
DISPLAY GP-MONITOR
307-7542 DISPLAY GP-MONITOR
MOUNTING GP-INSTRUMENT PANEL
384-3637 MOUNTING GP-INSTRUMENT PANEL
MOUNTING GP-INSTRUMENT PANEL
393-9276 MOUNTING GP-INSTRUMENT PANEL
MOUNTING GP-INSTRUMENT PANEL
397-8928 MOUNTING GP-INSTRUMENT PANEL
MOUNTING GP-INSTRUMENT PANEL
515-7784 MOUNTING GP-INSTRUMENT PANEL
PANEL GP-ANNUNCIATOR
320-1336 PANEL GP-ANNUNCIATOR
PANEL GP-ANNUNCIATOR
357-0346 PANEL GP-ANNUNCIATOR
PANEL GP-ELECTRONIC
273-5046 PANEL GP-ELECTRONIC
PYROMETER GP
195-0383 PYROMETER GP

Truck sale:

Caterpillar 3512B
 
Caterpillar 3512B
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Caterpillar 3512B, mobile generator sets, Construction
182,189 
Caterpillar 3512B, mobile generator sets, Construction
- mobile generator sets
FINANZAUTO S.A.
Caterpillar 3512B, Marine Propulsion / Auxiliary Engines, Construction
 
Caterpillar 3512B, Marine Propulsion / Auxiliary Engines, Construction
- Marine Propulsion / Auxiliary Engines
ZEPPELIN POWER SYSTEMS GMBH
Caterpillar 3512B
 
Caterpillar 3512B
- Industrial engines
FOLEY EQUIPMENT COMPANY
 
190,000 
Caterpillar 3512B, Stationary Generator Sets, Construction


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.