ELECTRICAL AND STARTING SYSTEM
SOLENOID GPSTARTING MOTOR GP
WIRING GP
STARTING MOTOR GP
WIRING GP
ELECTRICAL AND STARTING SYSTEM
SOLENOID GP
#SEBP66060500
5N-8980: VALVE AS-SOLENOID
5N-8980 VALVE AS-SOLENOID -AIR START
S/N EDP1-UP
24/32-VOLT
PART OF 384-3068, 388-2332 CONTROL GP-AIR STARTING, 396-2684 LINES GP-AIR, 392-8954, 392-8967 STARTING MOTOR GP-AIR
AN ATTACHMENT
S/N EDP1-UP
24/32-VOLT
PART OF 384-3068, 388-2332 CONTROL GP-AIR STARTING, 396-2684 LINES GP-AIR, 392-8954, 392-8967 STARTING MOTOR GP-AIR
AN ATTACHMENT
For full view, you need register
Parts for your 3516B GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7G-8765 | [1] | VALVE-SOLENOID | |
| 2. | 7N-9738 | [1] | HOUSING-RECEPTACLE (14-GA TO 18-GA) | |
| 3. | 7N-7779 | [1] | SOCKET-CONNECTOR (14-GA TO 18-GA) | |
| 4. | 7N-7780 | [1] | PIN-CONNECTOR (14-GA TO 18-GA) | |
| 5. | 9X-1813 E | SLEEVE (21-CM) | ||
| 6. | 5N-9073 | [1] | CLIP | |
| 7. | 3F-2065 | [1] | LOCKNUT (1/2-14-THD) | |
| 8. | 5N-8943 | [1] | ADAPTER | |
| E | ORDER BY THE CENTIMETER | |||
#SEBP66060501
385-2505: WIRING GP-AIR STARTING
For full view, you need register
Parts for your 3516B GENERATOR SET:
CATERPILLAR SIS#SEBP66060502
399-1522: WIRING GP-AIR STARTING
399-1522 WIRING GP-AIR STARTING
S/N EDP1-UP
FOR USE WITH INTEGRATED TURBINE AIR STARTING SYSTEM
AN ATTACHMENT
S/N EDP1-UP
FOR USE WITH INTEGRATED TURBINE AIR STARTING SYSTEM
AN ATTACHMENT
For full view, you need register
Parts for your 3516B GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 7N-7779 | [1] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 7N-7780 | [1] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| 7N-9738 | [1] | HOUSING-RECEPTACLE (14-GA TO 18-GA) | ||
| 097-7404 H | TUBE-HEAT SHRINK (19.1-MM DIA)(1-DM) | |||
| 9X-3402 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 232-0895 E | CONDUIT-FLEXIBLE (9.6-MM ID)(41-CM) | |||
| 283-0055 | [2] | ADAPTER-CONNECTOR | ||
| 297-5475 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| E | ORDER BY THE CENTIMETER | |||
| H | ORDER BY THE DECIMETER | |||
#SEBP66060503
380-8370: WIRING GP-ALTERNATOR
For full view, you need register
Parts for your 3516B GENERATOR SET:
CATERPILLAR SIS#SEBP66060504
380-8369: WIRING GP-ELECTRIC STARTING
380-8369 WIRING GP-ELECTRIC STARTING -DUAL STARTING MOTOR
S/N EDP1-UP
AN ATTACHMENT
S/N EDP1-UP
AN ATTACHMENT
For full view, you need register
Parts for your 3516B GENERATOR SET:
CATERPILLAR SIS#SEBP66060505
395-2174: WIRING GP-ELECTRIC STARTING
395-2174 WIRING GP-ELECTRIC STARTING -START SELECTOR
S/N EDP1-UP
PART OF 473-7806, 473-7807 BOX GP-INSTRUMENT PANEL
AN ATTACHMENT
S/N EDP1-UP
PART OF 473-7806, 473-7807 BOX GP-INSTRUMENT PANEL
AN ATTACHMENT
For full view, you need register
Parts for your 3516B GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 115-1322 | [2] | TERMINAL (DOUBLE) | |
| 2. | 135-6740 | [1] | BLOCK-DIODE | |
| 3. | 285-5102 | [1] | HARNESS AS-SWITCH (STARTING MOTOR SELECT) | |
| 110-8714 | [11] | END-WIRE (18-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| 2L-8075 | [1] | TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 233-9226 | [3] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 4. | 308-9770 | [1] | SWITCH-ROTARY (2-POSITION)(START SELECTOR) | |
| 5. | 308-9775 | [1] | LATCH-MOUNTING | |
| 6. | 308-9776 | [1] | BLOCK-CONTACT | |
| 7. | 308-9777 | [1] | BLOCK-CONTACT | |
| 8. | 228-3581 | [1] | FILM-WARNING (DO NOT OPERATE, READ OMM) | |
| E | ORDER BY THE CENTIMETER | |||
#SEBP66060506
145-5138: WIRING GP-ELECTRONIC CONTROL
145-5138 WIRING GP-ELECTRONIC CONTROL
S/N 4GN1265-UP; 7TN4525-UP; 9WZ1070-UP
DIGITAL VOLTAGE REGULATOR POWER
AN ATTACHMENT
S/N 4GN1265-UP; 7TN4525-UP; 9WZ1070-UP
DIGITAL VOLTAGE REGULATOR POWER
AN ATTACHMENT
For full view, you need register
Parts for your 3516B GENERATOR SET:
CATERPILLAR SIS#SEBP66060507
166-8368: WIRING GP-ENGINE
166-8368 WIRING GP-ENGINE
S/N 4GN1265-UP; 7TN4525-UP
ENGINE SENSORS AND GOVERNOR CONTROLS
FOR USE WITH 820-FRAME
AN ATTACHMENT
S/N 4GN1265-UP; 7TN4525-UP
ENGINE SENSORS AND GOVERNOR CONTROLS
FOR USE WITH 820-FRAME
AN ATTACHMENT
For full view, you need register
Parts for your 3516B GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 166-8369 | [1] | HARNESS AS-WIRING (ENGINE SENSORS) | ||
| 186-3736 | [34] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 3S-2093 | [20] | STRAP-CABLE | ||
| 5N-9067 | [1] | COLLAR | ||
| 5N-9072 | [1] | CLIP | ||
| 5N-9117 | [1] | ADAPTER | ||
| 6I-4348 | [1] | BOOT (40-PIN) | ||
| 8L-8413 | [9] | STRAP-CABLE (WHITE) | ||
| 8T-6342 B | TUBE-HEAT SHRINK (3.2-MM DIA)(39-CM) | |||
| 8T-9834 | [1] | PLUG AS-CONNECTOR (40-PIN) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 3E-8557 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 9X-3132 | [2] | SEAL-CONNECTOR (40-PIN) | ||
| 062-5388 | [1] | LOCKNUT (1-11-1/2-THD) | ||
| 109-3038 | [32] | END-WIRE (16-GA) | ||
| 134-6258 E | CABLE-ELECTRICAL (16-GA)(1332-CM) | |||
| 166-8370 | [1] | HARNESS AS-WIRING (GOVERNOR CONTROLS) | ||
| 5N-9067 | [1] | COLLAR | ||
| 5P-6009 EJ | TUBE-HEAT SHRINK (9.52-MM DIA)(10-CM) | |||
| 8L-8413 | [2] | STRAP-CABLE (WHITE) | ||
| 8T-6342 E | TUBE-HEAT SHRINK (3.2-MM DIA)(13-CM) | |||
| 109-3038 | [11] | END-WIRE (16-GA) | ||
| 109-3039 | [8] | END-WIRE (12-GA) | ||
| 109-8220 | [1] | END-WIRE (10-GA) | ||
| 134-6258 E | CABLE-ELECTRICAL (16-GA)(425-CM) | |||
| 140-3062 | [1] | PLUG AS-CONNECTOR | ||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| J | ORDER BY THE DECIMETER | |||
| M | METRIC PART | |||
#SEBP66060508
397-4698: WIRING GP-ENGINE
397-4698 WIRING GP-ENGINE -OIL, FUEL PRESSURE, LH SERVICE
S/N EDP1-UP
Type 1
AN ATTACHMENT
S/N EDP1-UP
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 3516B GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [15] | STRAP-CABLE | |
| 2. | 117-0067 | [4] | ELBOW | |
| 3. | 235-6280 Y | [1] | HARNESS AS-SENSOR (OIL, FUEL PRESSURE, LH SERVICE) | |
| 4. | 304-5668 Y | [1] | SENSOR GP-PRESSURE (UNFILTERED OIL) | |
| 4A. | 304-5668 Y | [1] | SENSOR GP-PRESSURE (FILTERED FUEL) | |
| 4B. | 304-5668 Y | [1] | SENSOR GP-PRESSURE (UNFILTERED FUEL) | |
| 4C. | 304-5668 Y | [1] | SENSOR GP-PRESSURE (FILTERED OIL) | |
| 5. | 0S-0509 | [1] | BOLT (3/8-16X0.75-IN) | |
| 6. | 4P-7581 | [3] | CLIP (LADDER) | |
| 7. | 4P-8134 | [5] | CLIP (LADDER) | |
| 8. | 5M-2894 | [1] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 9. | 6V-5048 | [8] | SEAL-O-RING | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP66060509
397-4698: WIRING GP-ENGINE
397-4698 WIRING GP-ENGINE -OIL, FUEL PRESSURE, LH SERVICE
S/N EDP1-UP
Type 2
AN ATTACHMENT
S/N EDP1-UP
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 3516B GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9X-6772 C | [7] | STRAP-CABLE | |
| 2. | 274-6719 C | [1] | SENSOR GP-PRESSURE (UNFILTERED OIL) | |
| 2A. | 274-6719 C | [1] | SENSOR GP-PRESSURE (FILTERED FUEL) | |
| 2B. | 274-6719 C | [1] | SENSOR GP-PRESSURE (UNFILTERED FUEL) | |
| 2C. | 274-6719 C | [1] | SENSOR GP-PRESSURE (FILTERED OIL) | |
| 3. | 478-8981 CY | [1] | HARNESS AS-SENSOR (OIL, FUEL PRESSURE, LH SERVICE) | |
| 4. | 0S-0509 | [1] | BOLT (3/8-16X0.75-IN) | |
| 5. | 117-0067 | [4] | ELBOW | |
| 6. | 4P-7581 C | [2] | CLIP (LADDER) | |
| 7. | 4P-8134 | [5] | CLIP (LADDER) | |
| 8. | 5M-2894 | [1] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 9. | 6V-5048 | [8] | SEAL-O-RING | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
Caterpillar Parts SIS Catalog 3516B :
Truck sale:
500,000
Caterpillar 3516B, Stationary Generator Sets, Construction
- Stationary Generator Sets
FINNING CHILE S.A.
- Stationary Generator Sets
FINNING CHILE S.A.
