392-5439 STARTING MOTOR GP-AIR -RH Type 2 FOR USE WITH "00" FLYWHEEL HOUSING, SINGLE POINT RETURN PRELUBRICATION AND INTEGRATED STARTER EXHAUST AN ATTACHMENT 3508

ELECTRICAL AND STARTING SYSTEM

STARTING MOTOR GP

0. 392-5439 STARTING M
1. 392-9007 STARTING M
2. 392-9030 STARTING M
3. 4W-5107 STARTING M
4. 4W-5108 STARTING M
5. 540-1591 STARTING M
6. 7C-3372 STARTING M
7. 107-0997 STARTING M
8. 108-5546 STARTING M
9. 117-8846 STARTING M
0. INFORMATION

INDUSTRIAL ENGINE 3508 INDUSTRIAL ENGINE LDP
3508 Industrial Engine LDP00001-UP SEBP6645 3508 LDP (2015)

ELECTRICAL AND STARTING SYSTEM

STARTING MOTOR GP

392-3549 STARTING MOTOR GP-AIR

392-5439 STARTING MOTOR GP-AIR

392-9007 STARTING MOTOR GP-AIR

392-9030 STARTING MOTOR GP-AIR

4W-5107 STARTING MOTOR GP-AIR

#SEBP66450500

392-5439: STARTING MOTOR GP-AIR

STARTING MOTOR GP-AIR

392-5439 STARTING MOTOR GP-AIR -RH
Type 2
FOR USE WITH "00" FLYWHEEL HOUSING, SINGLE POINT RETURN PRELUBRICATION AND INTEGRATED STARTER EXHAUST
AN ATTACHMENT

i07186034 SEBP6645

3925439 STARTING MOTOR GP-AIR Parts scheme

For full view, you need register

Parts for your 3508 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2L-2811	[2]	FITTING
2.	204-0241 C	[1]	FITTING
3.	4H-7869	[1]	GASKET
4.	4N-3411 J	[1]	VALVE GP-RELAY
5.	4W-5107 Y	[1]	STARTING MOTOR GP-AIR
6.	6N-3170 I	[1]	HOSE AS
8.	8N-8446	[1]	ELBOW
9.	8N-8447	[1]	ELBOW
10.	8N-8449	[1]	BRACKET
11.	8N-8488	[1]	SILENCER-AIR STARTING
12.	119-6284 Y	[1]	LUBRICATOR GP-AIR MOTOR
13.	9X-6380	[3]	BOLT (5/8-11X1.5-IN)
14.	1B-2886	[2]	BOLT (1/2-13X3.75-IN)
15.	1D-4566	[4]	BOLT (1/2-13X3.5-IN)
16.	1D-4569	[2]	BOLT (1/2-13X4.25-IN)
17.	3L-8993	[1]	FITTING
18.	4M-5317	[1]	BUSHING-REDUCER
20.	5B-7666	[1]	ELBOW
21.	5L-2534	[1]	U-BOLT
22.	5P-1075	[2]	WASHER-HARD (10.2X22.5X3-MM THK)
23.	5P-8245	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
24.	6B-3685	[2]	ELBOW
25.	6K-1972	[1]	ELBOW-FLARED
26.	8N-8451	[1]	GASKET
27.	8N-8452	[1]	GASKET
28.	8T-6762	[1]	PLUG-PIPE (1/2-14-THD)
29.	9S-8752	[2]	NUT-FULL (3/8-16-THD)

			AVAILABLE REPAIR KIT(S):
	7C-5105 J	[1]	KIT-VALVE SEAL (AIR STARTING)
			(INCLUDES SEALS, RETAINER & BUMPER)
	C		CHANGE FROM PREVIOUS TYPE
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	J		KIT MARKED J SERVICES PART(S) MARKED J
	Y		SEPARATE ILLUSTRATION

#SEBP66450501

392-9007: STARTING MOTOR GP-AIR

STARTING MOTOR GP-AIR

392-9007 STARTING MOTOR GP-AIR -RH
FOR USE WITH "0" FLYWHEEL HOUSING
CANNOT BE USED WITH SINGLE POINT RETURN PRELUBRICATION AND INTEGRATED STARTER EXHAUST SILENCER
AN ATTACHMENT

i05060177 SEBP6645

3929007 STARTING MOTOR GP-AIR Parts scheme

For full view, you need register

Parts for your 3508 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2L-2811	[1]	FITTING
2.	4N-3411 J	[1]	VALVE GP-RELAY
3.	4W-4536 I	[1]	HOSE AS
4.	4W-5108 Y	[1]	STARTING MOTOR GP-AIR
6.	7C-2946	[1]	BRACKET
7.	8N-8446	[1]	ELBOW
8.	9S-9238	[2]	SPACER (13.49X23.88X16.13-MM THK)
9.	107-8769	[1]	SILENCER-AIR STARTING
10.	119-6284 Y	[1]	LUBRICATOR GP-AIR MOTOR
11.	149-3996	[1]	NIPPLE-PIPE
12.	0S-1566	[3]	BOLT (5/8-11X1.5-IN)
13.	141-8596	[2]	BOLT-SOCKET HEAD (1/2-13X1.25-IN)
14.	1D-4566	[4]	BOLT (1/2-13X3.5-IN)
15.	1V-7753	[2]	SPACER (0.546X0.841X1.75-IN THK)
16.	3H-0510	[1]	GASKET
17.	3L-8993	[2]	FITTING
18.	4M-5317	[1]	BUSHING-REDUCER
19.	5B-7666	[1]	ELBOW
20.	5L-2534	[1]	U-BOLT
21.	5P-1075	[2]	WASHER-HARD (10.2X22.5X3-MM THK)
22.	5P-8245	[6]	WASHER-HARD (13.5X25.5X3-MM THK)
23.	6B-3685	[2]	ELBOW
24.	6K-1972	[1]	ELBOW-FLARED
25.	7X-0332	[2]	BOLT (1/2-13X4.5-IN)
26.	8N-8451	[1]	GASKET
27.	8N-8452	[1]	GASKET
28.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
29.	9S-8752	[2]	NUT-FULL (3/8-16-THD)

			AVAILABLE REPAIR KIT(S):
	7C-5105	[1]	KIT-VALVE SEAL (AIR STARTING)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	J		KIT MARKED J SERVICES PART(S) MARKED J
	Y		SEPARATE ILLUSTRATION

#SEBP66450502

392-9030: STARTING MOTOR GP-AIR

STARTING MOTOR GP-AIR

392-9030 STARTING MOTOR GP-AIR -RH
STANDARD ROTATION
FOR USE WITH "0" FLYWHEEL HOUSING, SINGLE POINT RETURN PRELUBRICATION AND REMOTE STARTER EXHAUSTING
AN ATTACHMENT

i05173531 SEBP6645

3929030 STARTING MOTOR GP-AIR Parts scheme

For full view, you need register

Parts for your 3508 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2L-2811	[1]	FITTING
2.	4N-3411 J	[1]	VALVE GP-RELAY
3.	4W-4536 I	[1]	HOSE AS
4.	4W-5108 Y	[1]	STARTING MOTOR GP-AIR
5.	6N-4857	[1]	FITTING
6.	9S-8752	[2]	NUT-FULL (3/8-16-THD)
7.	7C-2946	[1]	BRACKET
8.	8N-8446	[1]	ELBOW
9.	8N-8447	[1]	ELBOW
10.	9S-9238	[2]	SPACER (13.49X23.88X16.13-MM THK)
11.	119-6284 Y	[1]	LUBRICATOR GP-AIR MOTOR
12.	149-3996	[1]	NIPPLE-PIPE
13.	0S-1566	[3]	BOLT (5/8-11X1.5-IN)
14.	1D-4566	[4]	BOLT (1/2-13X3.5-IN)
15.	1D-4569	[2]	BOLT (1/2-13X4.25-IN)
16.	3H-0510	[1]	GASKET
17.	3L-8993	[2]	FITTING
18.	4M-5317	[1]	BUSHING-REDUCER
19.	5B-7666	[1]	ELBOW
20.	5L-2534	[1]	U-BOLT
21.	5P-1075	[2]	WASHER-HARD (10.2X22.5X3-MM THK)
22.	5P-8245	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
23.	6B-3685	[2]	ELBOW
24.	6K-1972	[1]	ELBOW-FLARED
25.	7X-0332	[2]	BOLT (1/2-13X4.5-IN)
26.	8N-8451	[1]	GASKET
27.	8N-8452	[1]	GASKET
28.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
29.	8T-6762	[1]	PLUG-PIPE (1/2-14-THD)

			AVAILABLE REPAIR KIT(S):
	7C-5105 J	[1]	KIT-VALVE SEAL (AIR STARTING)
			(INCLUDES SEALS, RETAINER & BUMPER)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	J		KIT MARKED J SERVICES PART(S) MARKED J
	Y		SEPARATE ILLUSTRATION

#SEBP66450503

4W-5107: STARTING MOTOR GP-AIR

STARTING MOTOR GP-AIR

4W-5107 STARTING MOTOR GP-AIR
PART OF 392-5439 STARTING MOTOR GP-AIR
FIELD REPLACEMENT ORDER @@@@@ 7C-3372@@@@@
FIELD REPLACEMENT FOR @@@@@ 4W-5108@@@@@
AN ATTACHMENT

i00109293 SEBP6645

4W5107 STARTING MOTOR GP-AIR Parts scheme

For full view, you need register

Parts for your 3508 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2W-6078	[1]	PINION-DRIVE (12-TEETH)
2.	2W-6082	[1]	KIT-DRIVE (AIR STARTING MOTOR)
			(INCLUDES O-RING, HOUSING, BEARING, SEAL & VENT)
3.	3B-4505	[8]	LOCKWASHER
4.	5N-8363	[1]	COVER AS
	4D-3118	[3]	PLUG-PIPE
5.	5N-8364	[1]	HOUSING-MOTOR
6.	5N-8384	[1]	SHAFT-DRIVE
7.	5N-8387	[1]	CASE-GEAR
8.	5N-8403 M	[1]	SCREW-PINION (M12X1.25X70-MM)
9.	5N-8425	[1]	WASHER (12.2X41.5X4.5-MM THK)
10.	6V-3959	[5]	LOCKWASHER
11.	5N-8427 M	[4]	BOLT-MOTOR (M10X1.5X180-MM)
12.	6V-3940 M	[8]	BOLT (M8X1.25X25-MM)
13.	1L-8497	[1]	RING-SNAP (SMALL)
14.	2W-6081	[1]	GEAR AS-DRIVE (37-TEETH)
15.	3J-7719	[1]	RING-RETAINING (INNER)
16.	5N-8365	[1]	PLATE-FRONT END
17.	5N-8367	[1]	PLATE-REAR END
18.	5N-8368	[1]	PINION-ROTOR (17-TEETH)
19.	5N-8372	[1]	SPRING-RETURN
20.	5N-8373	[1]	PISTON
21.	5N-8374	[1]	SLEEVE-SPRING
22.	5N-8375	[1]	CUP-SPRING
23.	5N-8377	[1]	BEARING-DRIVE SHAFT
24.	5N-8378	[1]	NUT-ROTOR CLAMP (M5X0.8-THD)
25.	5N-8379	[1]	SEAT-SPRING
26.	5N-8380	[1]	SPRING-PINION
27.	5N-8381	[1]	SPRING-CLUTCH
28.	5N-8383	[1]	CYLINDER
29.	5N-8388	[1]	ROTOR
30.	5N-8424	[1]	BULKHEAD
31.	5N-8428	[1]	WASHER-GEAR (10.1X34X15.5-MM THK)
32.	5N-9574	[1]	JAW AS-CLUTCH
33.	5P-9514	[1]	BALL BEARING
34.	6J-7855	[1]	RING-RETAINING (LARGE)
35.	6V-1394	[1]	BALL BEARING
36.	6V-3916	[1]	BALL BEARING
37.	6V-3935	[1]	RING-RETAINING
38.	096-4833 M	[1]	BOLT-SOCKET HEAD (M5X0.8X20-MM)
39.	6V-3938 M	[1]	BOLT (M10X1.5X20-MM)
40.	6V-3939 M	[1]	BOLT (M12X1.75X60-MM)
41.	6V-3971	[1]	RING-RETAINING (OUTER)
42.	7F-8671	[1]	BALL BEARING
43.	8B-7624	[1]	BALL BEARING
44.	039-4317	[2]	WASHER-SPRING

			AVAILABLE REPAIR KIT(S):
	5N-8390	[1]	KIT-SEAL & VANE (AIR STARTING MOTOR)
			(INCLUDES PINS, RINGS, SEALS & VANE)
	M		METRIC PART

#SEBP66450504

4W-5108: STARTING MOTOR GP-AIR

STARTING MOTOR GP-AIR

4W-5108 STARTING MOTOR GP-AIR -RH
PART OF 392-9007, 392-9030, 540-1591 STARTING MOTOR GP-AIR
FIELD REPLACEMENT ORDER @@@@@ 7C-3372@@@@@
AN ATTACHMENT

i00379552 SEBP6645

4W5108 STARTING MOTOR GP-AIR Parts scheme

For full view, you need register

Parts for your 3508 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2W-6078	[1]	PINION-DRIVE (12-TEETH)
2.	2W-6082	[1]	KIT-DRIVE (AIR STARTING MOTOR)
			(INCLUDES O-RING, HOUSING, BEARING, SEAL, & VENT)
3.	5N-8363	[1]	COVER AS
	4D-3118	[3]	PLUG-PIPE
4.	5N-8384	[1]	SHAFT-DRIVE
5.	5N-8387	[1]	CASE-GEAR
6.	5N-8403 M	[1]	SCREW-PINION (M12X1.25X70-MM)
7.	5N-8425	[1]	WASHER (12.2X41.5X4.5-MM THK)
8.	111-4399	[1]	HOUSING-MOTOR
9.	3B-4505	[8]	LOCKWASHER
10.	5N-8427 M	[4]	BOLT-MOTOR (M10X1.5X180-MM)
11.	6V-3940 M	[8]	BOLT (M8X1.25X25-MM)
12.	7X-0796	[4]	LOCKWASHER (10.2X18.4X2.5-MM THK)
	M		METRIC PART

#SEBP66450505

540-1591: STARTING MOTOR GP-AIR

STARTING MOTOR GP-AIR

540-1591 STARTING MOTOR GP-AIR -COUNTERCLOCKWISE ROTATION
RH*
FOR USE WITH SAE 0 REAR HOUSING
AN ATTACHMENT

i07211522 SEBP6645

5401591 STARTING MOTOR GP-AIR Parts scheme

For full view, you need register

Parts for your 3508 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2L-2811	[1]	FITTING
2.	4N-3411	[1]	VALVE GP-RELAY (AIR STARTING MOTOR)
	7C-5105	[1]	KIT-VALVE SEAL (AIR STARTING)
			(INCLUDES SEALS, RETAINER, & BUMPER)
3.	4W-4536 I	[1]	HOSE AS
4.	4W-5108 Y	[1]	STARTING MOTOR GP-AIR
5.	9S-8752	[2]	NUT-FULL (3/8-16-THD)
6.	7C-2946	[1]	BRACKET
7.	8N-8446	[1]	ELBOW
8.	9S-9238	[2]	SPACER (13.49X23.88X16.13-MM THK)
9.	107-8769	[1]	SILENCER-AIR STARTING
10.	119-6284 Y	[1]	LUBRICATOR GP-AIR MOTOR
11.	149-3996	[1]	NIPPLE-PIPE
12.	9X-6380	[3]	BOLT (5/8-11X1.5-IN)
13.	141-8596	[2]	BOLT-SOCKET HEAD (1/2-13X1.25-IN)
14.	1D-4566	[4]	BOLT (1/2-13X3.5-IN)
15.	1V-7753	[2]	SPACER (0.546X0.841X1.75-IN THK)
16.	3H-0510	[1]	GASKET (STARTER)
17.	3L-8993	[2]	FITTING
18.	4M-5317	[1]	BUSHING-REDUCER
19.	5B-7666	[1]	ELBOW (STREET)
20.	5L-2534	[1]	U-BOLT
21.	5P-1075	[2]	WASHER-HARD (10.2X22.5X3-MM THK)
22.	5P-8245	[6]	WASHER-HARD (13.5X25.5X3-MM THK)
23.	6B-3685	[2]	ELBOW
24.	6K-1972	[1]	ELBOW-FLARED
25.	7X-0332	[2]	BOLT (1/2-13X4.5-IN)
26.	8N-8451	[1]	GASKET
27.	8N-8452	[1]	GASKET
28.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	Y		SEPARATE ILLUSTRATION

#SEBP66450506

7C-3372: STARTING MOTOR GP-AIR

STARTING MOTOR GP-AIR

7C-3372 STARTING MOTOR GP-AIR
PART OF 391-8195, 392-3549 STARTING MOTOR GP-AIR
FIELD REPLACEMENT FOR @@@@@ 4W-5108@@@@@, @@@@@ 4W-5107@@@@@
AN ATTACHMENT

i00091625 SEBP6645

7C3372 STARTING MOTOR GP-AIR Parts scheme

For full view, you need register

Parts for your 3508 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	096-4833 M	[1]	BOLT-SOCKET HEAD (M5X0.8X20-MM)
2.	5N-8363	[1]	COVER AS
2A.	4D-3118	[3]	PLUG-PIPE
3.	039-4317	[2]	WASHER-SPRING
4.	5N-8383	[1]	CYLINDER
5.	6V-3916	[1]	BALL BEARING
6.	5N-8375	[1]	CUP-SPRING
7.	5N-8381	[1]	SPRING-CLUTCH
8.	2W-6081	[1]	GEAR AS-DRIVE (37-TEETH)
9.	5N-9574	[1]	JAW AS-CLUTCH
10.	5N-8387	[1]	CASE-GEAR
11.	5N-8424	[1]	BULKHEAD
12.	6V-3940 M	[8]	BOLT (M8X1.25X25-MM)
13.	3J-7719	[1]	RING-RETAINING (INNER)
14.	7F-8671	[1]	BALL BEARING
15.	5N-8428	[1]	WASHER-GEAR (10.1X34X15.5-MM THK)
16.	5N-8427 M	[4]	BOLT-MOTOR (M10X1.5X180-MM)
17.	7X-0796	[5]	LOCKWASHER (10.2X18.4X2.5-MM THK)
18.	5N-8403 M	[1]	SCREW-PINION (M12X1.25X70-MM)
19.	2W-6078	[1]	PINION-DRIVE (12-TEETH)
20.	5N-8380	[1]	SPRING-PINION
21.	2W-6082	[1]	KIT-DRIVE (AIR STARTING MOTOR)
			(INCLUDES O-RING, HOUSING, BEARING, SEAL & VENT)
22.	8B-7624	[1]	BALL BEARING
23.	5N-8379	[1]	SEAT-SPRING
24.	5N-8372	[1]	SPRING-RETURN
25.	5N-8384	[1]	SHAFT-DRIVE
26.	6V-3938 M	[1]	BOLT (M10X1.5X20-MM)
27.	5P-9514	[1]	BALL BEARING
28.	5N-8377	[1]	BEARING-DRIVE SHAFT
29.	5N-8373	[1]	PISTON
30.	6V-3939 M	[1]	BOLT (M12X1.75X60-MM)
31.	5N-8368	[1]	PINION-ROTOR (17-TEETH)
32.	6V-1394	[1]	BALL BEARING
33.	5N-8365	[1]	PLATE-FRONT END
34.	111-4399	[1]	HOUSING-MOTOR
35.	5N-8388	[1]	ROTOR
36.	5N-8367	[1]	PLATE-REAR END
37.	5N-8378	[1]	NUT-ROTOR CLAMP (M5X0.8-THD)
38.	1L-8497	[1]	RING-SNAP
39.	6J-7855	[1]	RING-RETAINING
40.	6V-3935	[1]	RING-RETAINING
41.	3B-4505	[8]	LOCKWASHER
42.	5N-8425	[1]	WASHER (12.2X41.5X4.5-MM THK)
43.	6V-3971	[1]	RING-RETAINING (OUTER)
44.	5N-8374	[1]	SLEEVE-SPRING

			AVAILABLE REPAIR KIT(S):
	5N-8390	[1]	KIT-SEAL & VANE (AIR STARTING MOTOR)
			(INCLUDES PINS, O-RINGS, SEALS, VANE, RETAINER & PISTON BUMPERS)
	M		METRIC PART

#SEBP66450507

107-0997: STARTING MOTOR GP-ELECTRIC

STARTING MOTOR GP-ELECTRIC

107-0997 STARTING MOTOR GP-ELECTRIC
PART OF 108-5546 STARTING MOTOR GP-ELECTRIC
AN ATTACHMENT

i05808941 SEBP6645

1070997 STARTING MOTOR GP-ELECTRIC Parts scheme

For full view, you need register

Parts for your 3508 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	0S-1597 C	[13]	BOLT (1/4-28X1-IN)
2.	3L-3380	[1]	BUSHING-TERMINAL
3.	3T-3418	[1]	FRAME AS-END
4.	3T-3423	[1]	CUP
5.	9G-4101	[1]	BUSHING-END
6.	3T-3424	[1]	PLUG-FELT
7.	7M-0327	[1]	WASHER-THRUST (17.4X25.4X1.6-MM THK)
8.	7M-8651	[1]	ARMATURE AS
9.	7M-0324	[1]	COIL AS-FIELD
10.	9H-3757	[2]	WASHER (0.516X1X0.094-IN THK)
11.	7X-0562	[6]	WASHER-HARD (13.5X19X0.8-MM THK)
12.	6V-8188	[6]	NUT (1/2-13-THD)
13.	7M-0326	[1]	CONNECTOR
14.	8T-4205	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
15.	3E-7769	[1]	SOLENOID AS (STARTER)
16.	6V-1322	[4]	BOLT (1/4-20X0.375-IN)
17.	4M-1831	[4]	PLUG-LEVER HOUSING
18.	7L-2894	[4]	GASKET
19.	3R-8797 C	[12]	SCREW & WASHER AS (3/8-24X0.72-IN)
20.	7M-0325	[1]	INSULATOR
21.	7F-3488	[6]	SHOE-POLE
22.	1S-7446	[3]	SCREW-MACHINE (8-32X0.437-IN)
23.	3T-9524	[6]	BRUSH AS
24.	9S-2544	[6]	SCREW-HEX HEAD (8-32X11.13-MM)
25.	3T-9525 Y	[1]	PLATE AS-BRUSH (STARTING MOTOR)
35.	2D-6392	[1]	SEAL-O-RING
36.	2J-8163	[2]	SEAL-O-RING
37.	1T-0808 C	[2]	WASHER (0.516X0.812X0.09-IN THK)
38.	3R-8801	[1]	CLAMP
39.	6N-3826	[1]	DRIVE AS-MOTOR
40.	1H-2629	[3]	STRIP-INSULATION
42.	9M-7606	[1]	PLUNGER AS
43.	036-9821	[1]	WASHER
44.	306-3998 C	[1]	BOOT-RUBBER
45.	4M-1828	[1]	RETAINER-SPRING
46.	9M-7609	[1]	SPRING (SHIFT LEVER)
47.	1H-1023	[1]	SEAL-O-RING
48.	3E-7771	[1]	HOUSING AS (STARTING MOTOR)
49.	3T-3424	[2]	PLUG-FELT
50.	3T-3423	[2]	CUP
51.	1M-9968	[1]	BUSHING
52.	2F-6678	[1]	SEAL-LIP TYPE
53.	4L-2729	[1]	WASHER (0.844X1.9X0.188-IN THK)
54.	4M-1854	[1]	SHAFT-LEVER
55.	2H-3429	[2]	RING-RETAINING
56.	4M-1853	[1]	LEVER AS-SHIFT
57.	5M-3034	[1]	LOCKNUT (5/16-24-THD)
58.	1M-9971	[1]	SPACER (0.835X1.72X0.188-IN THK)
59.	4M-1827	[1]	RETAINER-SPRING
60.	8C-3089	[1]	SEAL-O-RING
61.	7T-3974	[1]	HOUSING AS-DRIVE
62.	4M-1896	[1]	BUSHING-TERMINAL
63.	8C-9660	[3]	WASHER (4.6X7.9X0.8-MM THK)
64.	3T-9494	[6]	SPRING
65.	5J-5314	[5]	BOLT (5/16-18X1.5-IN)
66.	3N-3763	[1]	KIT-TERMINAL (STARTING MOTOR)
			(INCLUDES PARTS MARKED J IN GRAPHIC)
70.	7X-3373	[1]	BOLT (5/16-18X0.88-IN)
71.	6N-3279	[1]	INSULATOR
72.	4B-2049	[2]	NUT (10-32-THD)
73.	8T-0328	[10]	WASHER-HARD (5.5X10X1-MM THK)
74.	8F-1434	[2]	LOCKWASHER
75.	3T-3434 B	[6]	PLUG
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#SEBP66450508

108-5546: STARTING MOTOR GP-ELECTRIC

STARTING MOTOR GP-ELECTRIC

108-5546 STARTING MOTOR GP-ELECTRIC
FOR USE WITH 64-VOLT STARTING SYSTEM
AN ATTACHMENT

i00484061 SEBP6645

1085546 STARTING MOTOR GP-ELECTRIC Parts scheme

For full view, you need register

Parts for your 3508 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	107-0997 Y	[2]	STARTING MOTOR GP-ELECTRIC
2.	4H-7869	[2]	GASKET
3.	7J-8902	[6]	BOLT-12 POINT HEAD (5/8-11X1.5-IN)
4.	4L-6155	[1]	CABLE AS (0000-GA)
	5P-0745 BG		CABLE (0000-GA)
	3L-7634	[2]	TERMINAL-RING (0000-GA, 1/2-IN SCREW)
5.	294-2319	[2]	COVER-TERMINAL (BLACK)
	B		USE AS REQUIRED
	G		ORDER BY THE INCH
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP66450509

117-8846: STARTING MOTOR GP-ELECTRIC

STARTING MOTOR GP-ELECTRIC

117-8846 STARTING MOTOR GP-ELECTRIC
32-VOLT
PART OF 399-8642 STARTING MOTOR GP-ELECTRIC
AN ATTACHMENT

i00678109 SEBP6645

1178846 STARTING MOTOR GP-ELECTRIC Parts scheme

For full view, you need register

Parts for your 3508 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9H-3757	[2]	WASHER (0.516X1X0.094-IN THK)
2.	1S-7446	[3]	SCREW-MACHINE (8-32X0.437-IN)
3.	8C-9660	[3]	WASHER (4.6X7.9X0.8-MM THK)
4.	9S-2544	[6]	SCREW-HEX HEAD (8-32X11.13-MM)
5.	7M-0327	[1]	WASHER-THRUST (17.4X25.4X1.6-MM THK)
6.	3T-3418	[1]	FRAME AS-END
7.	3T-9525	[1]	PLATE AS-BRUSH (STARTING MOTOR)
8.	7F-3491	[2]	WASHER (0.516X1X0.094-IN THK)
9.	242-7979	[1]	SOLENOID AS (STARTING MOTOR)
10.	2J-8163	[2]	SEAL-O-RING
11.	7X-3373	[1]	BOLT (5/16-18X0.88-IN)
12.	3T-3434	[6]	PLUG
13.	5J-5314	[5]	BOLT (5/16-18X1.5-IN)
14.	3L-3380	[1]	BUSHING-TERMINAL
15.	036-9821	[1]	WASHER
16.	4M-1828	[1]	RETAINER-SPRING
17.	4M-1829	[1]	BOOT-RUBBER
19.	9M-7609	[1]	SPRING (SHIFT LEVER)
20.	4M-1827	[1]	RETAINER-SPRING
21.	8C-3089	[1]	SEAL-O-RING
22.	4M-1853	[1]	LEVER AS-SHIFT
23.	5M-3034	[1]	LOCKNUT (5/16-24-THD)
24.	7L-2894	[4]	GASKET
25.	4M-1831	[4]	PLUG-LEVER HOUSING
26.	4M-1854	[1]	SHAFT-LEVER
27.	1H-1023	[1]	SEAL-O-RING
28.	2D-6392	[1]	SEAL-O-RING
29.	7T-3974	[1]	HOUSING AS-DRIVE
30.	6N-3826	[1]	DRIVE AS-MOTOR
31.	2H-3429	[2]	RING-RETAINING
32.	6V-1322	[4]	BOLT (1/4-20X0.375-IN)
33.	8T-4205	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
34.	6N-3279	[1]	INSULATOR
35.	036-9823	[13]	BOLT (1/4-28X1-IN)
36.	1M-9971	[1]	SPACER (0.835X1.72X0.188-IN THK)
37.	1H-2629	[3]	STRIP-INSULATION
38.	7M-0324	[1]	COIL AS-FIELD
39.	3F-0379	[12]	SCREW-POLE SHOE (3/8-24-THD)
40.	7F-3488	[6]	SHOE-POLE
41.	7M-8651	[1]	ARMATURE AS
42.	7M-0325	[1]	INSULATOR
43.	3T-9524	[6]	BRUSH AS
44.	3N-3763	[1]	KIT-TERMINAL (STARTING MOTOR)
			(INCLUDES BUSHINGS & INSULATED WASHERS)
45.	3T-3422	[1]	WIRE AS
46.	3R-8801	[1]	CLAMP
47.	8F-1434	[2]	LOCKWASHER
48.	6V-8188	[6]	NUT (1/2-13-THD)
49.	7X-0562	[6]	WASHER-HARD (13.5X19X0.8-MM THK)
50.	4B-2049	[2]	NUT (10-32-THD)
51.	8T-0328	[2]	WASHER-HARD (5.5X10X1-MM THK)
52.	3T-9494	[6]	SPRING
53.	3E-7771	[1]	HOUSING AS (STARTING MOTOR)
54.	9G-4101	[1]	BUSHING-END
55.	3T-3424	[3]	PLUG-FELT
56.	3T-3423	[3]	CUP
57.	1M-9968	[1]	BUSHING
58.	2F-6678	[1]	SEAL-LIP TYPE
59.	4L-2729	[1]	WASHER (0.844X1.9X0.188-IN THK)
60.	4M-1896	[1]	BUSHING-TERMINAL
61.	6T-0362	[1]	INSULATOR

Information:

ELECTRICAL AND STARTING SYSTEM

STARTING MOTOR GP

Operation and Maintenance Manual

Air Tank Moisture and Sediment - Drain
3500 Industrial and Generator Set Engines

Air Starting Motor Lubricator Bowl - Clean
3500 Industrial and Generator Set Engines

Air Starting Motor Lubricator Oil Level - Check
3500 Industrial and Generator Set Engines

Starting Motor - Inspect
3500 Industrial and Generator Set Engines

Cold Weather Starting
3500 Industrial and Generator Set Engines

Starting the Engine
3500 Industrial and Generator Set Engines

Air Starting Motor - Inspect
3500 Industrial and Generator Set Engines

Special Instruction

Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}

Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}

Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}

Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}

Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}

Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat^® Products {1408, 1450, 1453}

Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat^® Products {1408, 1450, 1453}

Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat^® Products {1453}

Specifications

Electric Starting Motor
3500 Industrial Engines

Air Starting Motor
3500 Industrial Engines

Electric Starting Motor
3500 Industrial Engines

Systems Operation

Starting Motor
3500 Industrial Engines

Testing and Adjusting

Electric Starting System
3500 Industrial Engines

Pinion Clearance Adjustment
3500 Industrial Engines

Pressure Regulating Valve
3500 Industrial Engines

Disassembly and Assembly

Electric Starting Motor - Remove and Install
3500B Engines

Air Starting Motor - Remove
3500B Engines

Air Starting Motor - Install
3500B Engines

Air Starting Motor - Disassemble
3500B Engines

Air Starting Motor - Assemble
3500B Engines

Caterpillar Parts SIS Catalog 3508 :

392-5439 STARTING MOTOR GP-AIR

392-3549 STARTING MOTOR GP-AIR

391-8195 STARTING MOTOR GP-AIR

4P-2730 STARTING AID GP-ETHER

7W-8641 SOLENOID GP-SHUTOFF

7W-7767 SOLENOID GP-SHUTOFF

7W-8054 SHUTOFF GP-ELECTRICAL

7W-8053 SHUTOFF GP-ELECTRICAL

392-9007 STARTING MOTOR GP-AIR

392-9030 STARTING MOTOR GP-AIR

4W-5107 STARTING MOTOR GP-AIR

4W-5108 STARTING MOTOR GP-AIR

540-1591 STARTING MOTOR GP-AIR

7C-3372 STARTING MOTOR GP-AIR

107-0997 STARTING MOTOR GP-ELECTRIC

108-5546 STARTING MOTOR GP-ELECTRIC

Truck sale:

61,000

Caterpillar 3508, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY

307.208

Caterpillar 3508, Stationäre Stromaggregate, Bau-Und Bergbauausrüstung
- Stationary Generator Sets
TOROMONT POWER SYSTEMS

84,962

Caterpillar 3508, Industrial engines, Construction
- Industrial engines
FINANZAUTO S.A.

Caterpillar 3508, Marine Propulsion / Auxiliary Engines, Construction

145.548

Caterpillar 3508 PKGI, transportable stromaggregate, Bau-Und Bergbauausrüstung