ELECTRICAL AND STARTING SYSTEM
WIRING GPELECTRICAL AND STARTING SYSTEM
WIRING GP
#SEBP66670300
431-9076: WIRING GP-CAB
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-5239 | [8] | RELAY AS (24-VOLT) | |
| 2. | 6I-1418 | [3] | SPACER (8.2X12.7X28.7-MM THK) | |
| 3. | 7K-1181 | [15] | STRAP-CABLE | |
| 4. | 8T-9655 | [6] | MOUNT-ISOLATION | |
| 5. | 9D-3767 | [1] | PLUG-BUTTON | |
| 6. | 9W-1442 | [1] | FUSE (10-AMPERE) | |
| 7. | 9X-2044 M | [8] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 8. | 158-6634 Y | [1] | SWITCH GP-TOGGLE (ON, OFF) | |
| 9. | 189-8154 | [3] | GUARD-SWITCH | |
| 10. | 189-8359 | [1] | BRACKET AS | |
| 11. | 192-1590 Y | [1] | CONTROL GP-UNPROGRAMMED | |
| 12. | 200-1898 | [2] | SUPPRESSOR-ARC | |
| 13. | 207-6941 Y | [1] | SWITCH GP-TOGGLE (SINGLE POLE)(ENGINE START) | |
| 14. | 249-1293 | [1] | FILM-INSTRUCTION (ELECTRICAL POWER) | |
| 15. | 249-1294 | [1] | FILM-INFORMATION (ENGINE START) | |
| 16. | 249-5030 | [1] | FILM-INFORMATION (TRANSMISSION CONTROL) | |
| 17. | 284-0974 | [1] | PLATE | |
| 18. | 308-3529 | [1] | SWITCH AS-TOGGLE (TRANSMISSION OVERRIDE CONTROL) | |
| 6T-3631 | [2] | NUT-HEX (15/32-32-THD) | ||
| 6T-3632 | [1] | LOCKWASHER | ||
| 6T-3633 | [1] | RING-LOCKING | ||
| 8T-8729 | [12] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 230-4010 | [1] | RECEPTACLE AS-CONNECTOR (12-PIN) | ||
| 19. | 315-3232 | [1] | LAMP AS-INDICATOR (24-VOLT, GREEN) | |
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 20. | 320-2974 | [1] | COVER AS-PANEL | |
| 6V-9632 M | [4] | NUT-WELD (M6X1-THD) | ||
| 318-6726 | [1] | COVER | ||
| 21. | 361-2560 | [1] | FUSE GP | |
| 22. | 432-1511 | [1] | HARNESS AS-CAB | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3E-5226 | [2] | SOCKET-CONNECTOR (12-GA TO 14-GA) | ||
| 3E-5519 | [8] | PLUG AS-CONNECTOR (5-PIN) | ||
| 3S-2093 | [2] | STRAP-CABLE | ||
| 5S-3657 | [1] | RECEPTACLE AS-CONNECTOR (10-PIN) | ||
| 7X-6222 | [1] | PLUG AS-CONNECTOR (24-PIN) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 3E-8558 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 9X-3265 | [2] | SEAL-CONNECTOR (24-PIN) | ||
| 8T-8737 | [78] | PLUG-SEAL | ||
| 9X-0145 | [1] | RECEPTACLE AS-CONNECTOR (24-PIN) | ||
| 100-5041 | [33] | TERMINAL-RECEPTACLE (18-GA TO 20-GA) | ||
| 114-8843 | [5] | SLEEVE-PLASTIC | ||
| 119-3662 | [20] | TUBE-HEAT SHRINK (10.85-MM DIA) | ||
| 125-7874 | [45] | TUBE-HEAT SHRINK (5.72-MM DIA) | ||
| 125-7875 | [25] | TUBE-HEAT SHRINK (7.44-MM DIA) | ||
| 9X-3402 | [62] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [62] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 126-1774 | [1] | COVER-CONNECTOR | ||
| 128-4155 | [2] | TERMINAL AS | ||
| (EACH INCLUDES) | ||||
| 5P-1475 | [1] | TERMINAL-FORK (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 6V-2689 | [1] | TUBE-HEAT SHRINK (6.35-MM DIA) | ||
| 2L-8071 | [1] | TERMINAL-RING (10-GA TO 12-GA, 1/2-IN SCREW) | ||
| 5P-6006 | [1] | TUBE-HEAT SHRINK (9.52-MM DIA) | ||
| 2L-8077 | [2] | TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW) | ||
| 2L-8077 | [1] | TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW) | ||
| 2L-8081 | [1] | TERMINAL-RING (14-GA TO 16-GA, 1/2-IN SCREW) | ||
| 2L-8078 | [1] | TERMINAL-RING (14-GA TO 16-GA, 5/16-IN SCREW) | ||
| 125-7874 | [3] | TUBE-HEAT SHRINK (5.72-MM DIA) | ||
| 9X-3401 | [29] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [29] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 150-6765 | [1] | PLUG AS-CONNECTOR (26-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 159-9322 | [1] | SEAL-O-RING | ||
| 155-2270 | [3] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 155-2271 | [3] | KIT-CONNECTING PLUG (4-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 177-9648 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 230-4009 | [1] | PLUG AS-CONNECTOR (12-PIN) | ||
| 455-0709 | [1] | SEAL-CONNECTOR | ||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 455-0704 | [1] | SEAL-CONNECTOR | ||
| 243-4505 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 23. | 099-3649 M | [3] | BOLT (M8X1.25X40-MM) | |
| 24. | 110-6197 | [1] | GASKET | |
| 25. | 111-4627 M | [2] | SCREW-MACHINE (M6X1X30-MM) | |
| 26. | 3T-2662 | [1] | CIRCUIT BREAKER AS (15-AMPERE, AUTOMATIC RESET) | |
| 6V-8376 | [2] | SCREW-MACHINE (8-32X0.25-IN) | ||
| 9B-7233 | [2] | LOCKWASHER | ||
| 27. | 5P-8395 | [4] | SCREW-MACHINE | |
| 28. | 6B-4540 | [4] | NUT (4-40-THD) | |
| 29. | 9N-0869 | [3] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 30. | 9P-2553 | [2] | SPACER (6.83X10.28X11-MM THK) | |
| 31. | 9X-8486 | [2] | SCREW-MACHINE (8-32X0.75-IN) | |
| ****STANDARD REMOVAL**** | ||||
| 246-5459 AFJ | [1] | PLATE | ||
| A | NOT PART OF THIS GROUP | |||
| F | NOT SHOWN | |||
| J | PART OF STANDARD WIRING GP-CAB | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP66670301
398-0839: WIRING GP-CHASSIS
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [2] | STRAP-CABLE | |
| 2. | 3E-5169 | [1] | GUARD-SWITCH | |
| 3. | 4H-1225 | [1] | WASHER (11X22X6-MM THK) | |
| 4. | 7K-1181 | [34] | STRAP-CABLE | |
| 5. | 091-0081 | [1] | SPACER (10.5X20X10-MM THK) | |
| 6. | 116-8247 | [1] | PLATE-INSTRUCTION (HOOD TILT) | |
| 7. | 118-6365 | [1] | PLATE AS | |
| 8. | 172-4871 | [1] | BRACKET AS | |
| 6V-6716 | [2] | RIVET-TRUSS HEAD | ||
| 109-1645 | [1] | CLIP | ||
| 9. | 184-6636 | [1] | PLATE-INFORMATION (ENGINE SHUTOFF) | |
| 10. | 191-8041 | [1] | ANGLE AS | |
| 11. | 194-6722 Y | [1] | SENSOR GP-PRESSURE (ATMOSPHERIC) | |
| 12. | 249-5492 | [1] | GUARD-SWITCH | |
| 13. | 264-4297 | [1] | SENSOR AS-TEMPERATURE (2-PIN)(HYDRAULIC OIL) | |
| 137-6645 | [1] | PAD-CONNECTOR | ||
| 14. | 301-2979 | [1] | SWITCH GP-TOGGLE (ENGINE SHUTDOWN) | |
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9G-3695 | [1] | PLUG-SEAL | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 15. | 301-2980 | [1] | SWITCH AS-TOGGLE (HOOD TILT ACTUATOR) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 16. | 344-7391 | [1] | SENSOR-PRESSURE (EJECTOR)(PARKING BRAKE) | |
| 16A. | 344-7391 | [1] | SENSOR-PRESSURE (EJECTOR)(BRAKE) | |
| 17. | 399-3649 Y | [1] | PANEL GP-CIRCUIT BREAKER | |
| 18. | 399-3651 Y | [1] | HARNESS AS-CHASSIS | |
| 19. | 399-3652 Y | [1] | HARNESS AS-SENSOR (HYDRAULIC OIL TEMPERATURE) | |
| 20. | 033-8248 | [2] | CLIP (LOOP) | |
| 21. | 130-5300 | [10] | CLIP | |
| 22. | 132-5789 | [3] | CLIP (LADDER)(LADDER) | |
| 23. | 142-1657 | [1] | BRACKET AS | |
| 24. | 149-7738 | [2] | CLIP (LOOP)(LOOP) | |
| 25. | 189-3158 | [1] | SUPPRESSOR-ARC | |
| 26. | 237-8366 | [1] | WIRE AS | |
| 27. | 397-9301 | [1] | WASHER-HARD (11.5X20X15-MM THK) | |
| 28. | 3J-1907 | [3] | SEAL-O-RING | |
| 29. | 3K-0360 | [1] | SEAL-O-RING | |
| 30. | 4D-7388 | [4] | CLIP (LOOP) | |
| 31. | 4D-7794 | [5] | CLIP | |
| 32. | 4E-6859 | [1] | BRACKET AS | |
| 33. | 4K-8864 | [8] | CLIP (LOOP)(LOOP) | |
| 34. | 4P-7429 | [3] | CLIP (LADDER)(LADDER) | |
| 35. | 4P-7581 | [4] | CLIP (LADDER)(LADDER) | |
| 36. | 4S-1962 | [2] | CLIP (LOOP)(LOOP) | |
| 37. | 5P-9085 | [3] | CLIP (LOOP)(LOOP) | |
| 38. | 5P-9297 | [5] | CLIP (LOOP)(LOOP) | |
| 39. | 6D-4244 | [4] | CLIP (LOOP)(LOOP) | |
| 40. | 6V-1889 | [2] | CLIP (LOOP)(LOOP) | |
| 41. | 6V-3265 | [1] | CLIP | |
| 42. | 7X-7729 | [4] | WASHER (11X25X3-MM THK) | |
| 43. | 8M-2770 | [4] | CLIP (LOOP)(LOOP) | |
| 44. | 8M-2773 | [1] | CLIP (LOOP)(LOOP) | |
| 45. | 8T-4121 | [52] | WASHER-HARD (11X21X2.5-MM THK) | |
| 46. | 8T-4136 M | [7] | BOLT (M10X1.5X25-MM) | |
| 47. | 8T-4137 M | [40] | BOLT (M10X1.5X20-MM) | |
| 48. | 8T-4195 M | [5] | BOLT (M10X1.5X30-MM) | |
| 49. | 8T-4196 M | [2] | BOLT (M10X1.5X35-MM) | |
| 50. | 8T-4222 | [2] | WASHER-PLATED (11X32X2.5-MM THK) | |
| 51. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 52. | 8T-4244 M | [2] | NUT (M12X1.75-THD) | |
| 53. | 8T-7547 M | [4] | BOLT (M8X1.25X30-MM) | |
| 54. | 9M-8406 | [2] | CLIP (LOOP)(LOOP) | |
| 55. | 9X-8250 | [3] | CLIP | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP66670302
434-9694: WIRING GP-CHASSIS
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-5169 | [1] | GUARD-SWITCH | |
| 2. | 7K-1181 | [69] | STRAP-CABLE | |
| 3. | 189-3158 | [2] | SUPPRESSOR-ARC | |
| 4. | 189-8115 | [1] | WIRE AS | |
| 5. | 213-0455 | [1] | SWITCH AS-TOGGLE (PARKING BRAKE OVERRIDE) | |
| 6T-3631 | [2] | NUT-HEX (15/32-32-THD) | ||
| 6T-3632 | [1] | LOCKWASHER | ||
| 6T-3633 | [1] | RING-LOCKING | ||
| 8T-8729 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 6. | 249-5492 | [1] | GUARD-SWITCH | |
| 7. | 301-2979 | [1] | SWITCH GP-TOGGLE (GROUND LEVEL SHUTDOWN) | |
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9G-3695 | [1] | PLUG-SEAL | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 6T-3631 | [2] | NUT-HEX (15/32-32-THD) | ||
| 6T-3632 | [1] | LOCKWASHER | ||
| 6T-3633 | [1] | RING-LOCKING | ||
| 8. | 315-3232 | [1] | LAMP AS-INDICATOR (24-VOLT, GREEN)(PARKING BRAKE OVERRIDE) | |
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 317-2820 | [1] | LAMP AS-INDICATOR (24-VOLT, GREEN) | ||
| 9. | 434-9693 | [1] | HARNESS AS-CONTROL | |
| 9X-3401 | [12] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [12] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [9] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [2] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| 155-2270 | [9] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE(S) & INTERFACE SEAL) | ||||
| 8T-8737 | [8] | PLUG-SEAL | ||
| 102-8802 | [5] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-3402 | [40] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [40] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 2L-8071 | [1] | TERMINAL-RING (10-GA TO 12-GA, 1/2-IN SCREW) | ||
| 2L-8075 | [1] | TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(60-CM) | |||
| 3E-3377 | [1] | WEDGE-RECEPTACLE LOCK (4-PIN) | ||
| 10. | 130-5300 | [4] | CLIP | |
| 11. | 147-0385 | [3] | CLIP | |
| 12. | 3T-2662 | [1] | CIRCUIT BREAKER AS (15-AMPERE, AUTOMATIC RESET) | |
| 6V-8376 | [2] | SCREW-MACHINE (8-32X0.25-IN) | ||
| 9B-7233 | [2] | LOCKWASHER | ||
| 13. | 5M-6668 | [2] | SCREW-MACHINE (8-32X0.75-IN) | |
| 14. | 6V-2383 | [2] | CLIP | |
| 15. | 8M-2772 | [1] | CLIP (LOOP) | |
| 16. | 8R-8087 | [1] | SPACER (11X22X28-MM THK) | |
| 17. | 8T-4121 | [6] | WASHER-HARD (11X21X2.5-MM THK) | |
| 18. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 19. | 8T-4136 M | [3] | BOLT (M10X1.5X25-MM) | |
| 20. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 21. | 8T-4184 M | [2] | BOLT (M12X1.75X45-MM) | |
| 22. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 23. | 8T-4244 M | [2] | NUT (M12X1.75-THD) | |
| 24. | 8T-6466 M | [1] | BOLT (M10X1.5X60-MM) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP66670303
486-7835: WIRING GP-CHASSIS
486-7835 WIRING GP-CHASSIS -SECONDARY STEERING
S/N PF8583-UP
PART OF 394-3201 STEERING AR-SECONDARY
S/N PF8583-UP
PART OF 394-3201 STEERING AR-SECONDARY
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS#SEBP66670304
372-4890: WIRING GP-CONTROL
372-4890 WIRING GP-CONTROL
S/N PF81-UP
PART OF 371-4485 CONTROL & MTG GP-ELHYD, 371-4486 CONTROL AR-HANDLE
S/N PF81-UP
PART OF 371-4485 CONTROL & MTG GP-ELHYD, 371-4486 CONTROL AR-HANDLE
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | |
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 2. | 7K-1181 | [7] | STRAP-CABLE | |
| 3. | 170-1821 | [1] | SWITCH AS-PUSH BUTTON (HORN) | |
| 6F-0253 | [1] | LOCKWASHER | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 172-3511 | [1] | NUT (5/8-24-THD) | ||
| 4. | 263-1493 | [1] | SWITCH GP-PUSH BUTTON (DOWNSHIFT) | |
| 6F-0253 | [1] | LOCKWASHER | ||
| 9X-3402 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [3] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2260 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 172-3511 | [1] | NUT (5/8-24-THD) | ||
| 5. | 284-3623 | [1] | SWITCH AS-ROCKER (24-VOLT)(IMPLEMENT LOCKOUT) | |
| 6. | 284-3624 | [1] | SWITCH AS-ROCKER (24-VOLT)(FINE MODULATION) | |
| 7. | 307-4671 Y | [2] | CONTROL GP-HANDLE (PILOT CONTROL) | |
| 8. | 372-4845 Y | [1] | HARNESS AS-CONTROL | |
| 9. | 096-4840 | [1] | CLIP | |
| 10. | 156-6175 | [1] | CLIP (LADDER) | |
| 11. | 245-8842 | [1] | CLIP | |
| 13. | 5C-2890 M | [1] | NUT (M6X1-THD) | |
| 14. | 6V-7357 M | [1] | BOLT (M6X1X25-MM) | |
| 15. | 8R-3695 | [3] | GROMMET | |
| 16. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 17. | 9X-2043 M | [1] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| 18. | 9X-2044 M | [8] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 19. | 9X-6165 | [1] | WASHER (6.5X22X2.5-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP66670305
372-4890: WIRING GP-CONTROL
372-4890 WIRING GP-CONTROL
S/N PF81-UP
PART OF 371-4485 CONTROL & MTG GP-ELHYD, 371-4486 CONTROL AR-HANDLE
S/N PF81-UP
PART OF 371-4485 CONTROL & MTG GP-ELHYD, 371-4486 CONTROL AR-HANDLE
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 2. | 7K-1181 | [7] | STRAP-CABLE | |
| 3. | 170-1821 | [1] | SWITCH AS-PUSH BUTTON (HORN) | |
| 6F-0253 | [1] | LOCKWASHER | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 172-3511 | [1] | NUT (5/8-24-THD) | ||
| 4. | 263-1493 | [1] | SWITCH GP-PUSH BUTTON (DOWNSHIFT) | |
| 6F-0253 | [1] | LOCKWASHER | ||
| 9X-3402 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [3] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 172-3511 | [1] | NUT (5/8-24-THD) | ||
| 5. | 284-3623 | [1] | SWITCH AS-ROCKER (24-VOLT)(IMPLEMENT LOCKOUT) | |
| 6. | 284-3624 | [1] | SWITCH AS-ROCKER (24-VOLT)(FINE MODULATION) | |
| 7. | 361-6015 CY | [2] | CONTROL GP-HANDLE (PILOT CONTROL) | |
| 8. | 372-4845 Y | [1] | HARNESS AS-CONTROL | |
| 9. | 096-4840 | [1] | CLIP | |
| 10. | 156-6175 | [1] | CLIP (LADDER) | |
| 11. | 245-8842 | [1] | CLIP (LOOP) | |
| 13. | 5C-2890 M | [1] | NUT (M6X1-THD) | |
| 14. | 6V-7357 M | [1] | BOLT (M6X1X25-MM) | |
| 15. | 8R-3695 | [3] | GROMMET | |
| 16. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 17. | 9X-2043 M | [1] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| 18. | 9X-2044 M | [8] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 19. | 9X-6165 | [1] | WASHER (6.5X22X2.5-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP66670306
175-4207: WIRING GP-ELECTROHYDRAULIC
175-4207 WIRING GP-ELECTROHYDRAULIC
S/N PF81-203
PART OF 209-3059 VALVE & MTG GP-MAIN CONTROL
S/N PF81-203
PART OF 209-3059 VALVE & MTG GP-MAIN CONTROL
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 2. | 7K-1181 | [5] | STRAP-CABLE | |
| 3. | 238-5643 | [1] | HARNESS AS-VALVE (ELECTROHYDRAULIC CONTROL) | |
| 102-8802 | [2] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH KIT-RECEPTACLE INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8737 | [8] | PLUG-SEAL | ||
| 155-2270 | [7] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH KIT-CONNECTING PLUG INCLUDES PLUG AS & WEDGE) | ||||
| 4. | 130-5300 | [2] | CLIP | |
| 5. | 4D-9517 | [1] | CLIP | |
| 6. | 174-5907 | [1] | CLIP (LOOP) | |
| 7. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 8. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| M | METRIC PART | |||
#SEBP66670307
375-5759: WIRING GP-ELECTROHYDRAULIC
375-5759 WIRING GP-ELECTROHYDRAULIC
S/N PF81-UP
PART OF 441-4593 CONTROL & MTG GP-ELHYD
S/N PF81-UP
PART OF 441-4593 CONTROL & MTG GP-ELHYD
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 218-4935 | [1] | SUPPRESSOR-ARC | |
| 2. | 284-3623 | [1] | SWITCH AS-ROCKER (24-VOLT)(IMPLEMENT LOCKOUT) | |
| 3. | 284-3624 | [1] | SWITCH AS-ROCKER (24-VOLT)(FINE MODULATION) | |
| 4. | 373-0497 Y | [1] | HARNESS AS-SWITCH | |
| 5. | 096-4840 | [1] | CLIP | |
| 6. | 156-6175 | [1] | CLIP (LADDER) | |
| 7. | 245-8842 | [1] | CLIP | |
| 8. | 5C-2890 M | [1] | NUT (M6X1-THD) | |
| 9. | 6V-7357 M | [1] | BOLT (M6X1X25-MM) | |
| 10. | 7K-1181 | [7] | STRAP-CABLE | |
| 11. | 8R-3695 | [3] | GROMMET | |
| 12. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 13. | 9X-2043 M | [1] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| 14. | 9X-6165 | [1] | WASHER (6.5X22X2.5-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP66670308
416-0677: WIRING GP-ELECTROHYDRAULIC
416-0677 WIRING GP-ELECTROHYDRAULIC
S/N PF81-UP
PART OF 397-6463, 397-6472, 441-7661 VALVE & MTG GP-MAIN CONTROL
S/N PF81-UP
PART OF 397-6463, 397-6472, 441-7661 VALVE & MTG GP-MAIN CONTROL
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS#SEBP66670309
398-0448: WIRING GP-ELECTRONIC CONTROL
398-0448 WIRING GP-ELECTRONIC CONTROL
S/N TXG1-UP
PART OF 394-6487 ENGINE AR-COMPLETE
S/N TXG1-UP
PART OF 394-6487 ENGINE AR-COMPLETE
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [23] | STRAP-CABLE | |
| 2. | 206-1345 | [2] | STRAP-CABLE | |
| 3. | 288-1023 | [1] | BRACKET-SUPPORT | |
| 4. | 349-7699 | [1] | BRACKET | |
| 5. | 354-0049 Y | [1] | HARNESS AS-ENGINE | |
| 6. | 0S-0509 | [1] | BOLT (3/8-16X0.75-IN) | |
| 7. | 0S-1576 | [2] | BOLT (5/8-18X2-IN) | |
| 8. | 104-6202 | [2] | CLIP | |
| 9. | 132-5789 | [3] | CLIP (LADDER) | |
| 10. | 1A-4273 | [1] | BOLT (5/8-18X1.25-IN) | |
| 11. | 352-3964 | [1] | CLIP (LADDER) | |
| 12. | 3B-1915 | [1] | BOLT (3/8-16X1.375-IN) | |
| 13. | 4P-7429 | [1] | CLIP (LADDER) | |
| 14. | 4P-7581 | [3] | CLIP (LADDER) | |
| 15. | 4P-8134 | [4] | CLIP (LADDER) | |
| 16. | 5M-2894 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 17. | 5P-8247 | [3] | WASHER-HARD (17X32X3.5-MM THK) | |
| 18. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| Y | SEPARATE ILLUSTRATION | |||
