ELECTRICAL AND STARTING SYSTEM
WIRING GPELECTRICAL AND STARTING SYSTEM
WIRING GP
#SEBP66670310
386-9163: WIRING GP-ENGINE
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [1] | STRAP-CABLE | |
| 2. | 5C-2082 | [1] | SPACER (17X20X45-MM THK) | |
| 3. | 5I-3883 | [1] | BRACKET AS | |
| 4. | 7K-1181 | [10] | STRAP-CABLE | |
| 5. | 091-0081 | [1] | SPACER (10.5X20X10-MM THK) | |
| 6. | 097-0832 | [1] | SPACER (13.5X22X14-MM THK) | |
| 7. | 118-6878 | [1] | BRACKET AS | |
| 8. | 124-3019 | [3] | BRACKET AS | |
| 9. | 163-5382 | [1] | SPACER (10.5X25X20-MM THK) | |
| 10. | 192-5017 | [1] | BRACKET AS | |
| 11. | 193-1730 | [1] | BRACKET AS | |
| 12. | 197-6453 | [1] | BRACKET AS | |
| 13. | 256-6453 | [1] | SENSOR-TEMPERATURE (2-PIN)(TORQUE CONVERTER OIL) | |
| 14. | 262-6019 | [1] | BRACKET AS | |
| 15. | 399-3590 | [1] | CABLE AS | |
| 16. | 399-3591 | [1] | CABLE AS | |
| 17. | 399-3592 Y | [1] | HARNESS AS-ENGINE (CHASSIS) | |
| 18. | 033-8248 | [1] | CLIP (LOOP) | |
| 19. | 067-2551 | [1] | CLIP | |
| 20. | 096-4839 | [3] | CLIP | |
| 21. | 124-1479 | [7] | CLIP | |
| 22. | 130-5300 | [2] | CLIP | |
| 23. | 132-5789 | [2] | CLIP (LADDER) | |
| 24. | 134-2540 | [1] | RECEPTACLE AS-CONNECTOR | |
| 25. | 137-6722 | [2] | CLIP | |
| 26. | 3K-0360 | [1] | SEAL-O-RING | |
| 27. | 4D-7794 | [1] | CLIP | |
| 28. | 4K-8864 | [1] | CLIP (LOOP) | |
| 29. | 4L-6454 | [1] | BOLT (3/8-16X1-IN) | |
| 30. | 4L-9337 | [1] | BOLT (3/8-16X1.5-IN) | |
| 31. | 4P-7581 | [3] | CLIP (LADDER) | |
| 32. | 4P-8134 | [1] | CLIP (LADDER) | |
| 33. | 5M-3062 | [1] | BOLT (3/8-16X0.75-IN) | |
| 34. | 5P-2955 | [2] | BOLT (5/16-18X2.5-IN) | |
| 35. | 6D-4244 | [3] | CLIP (LOOP) | |
| 36. | 6V-8801 | [1] | NUT (3/8-16-THD) | |
| 37. | 7D-1728 | [1] | CLIP | |
| 38. | 7N-3718 | [1] | CLIP | |
| 39. | 7X-0274 | [2] | BOLT (5/16-18X2.75-IN) | |
| 40. | 7X-0343 | [1] | BOLT (5/8-11X1.25-IN) | |
| 41. | 7X-0349 | [1] | BOLT (5/8-11X3-IN) | |
| 42. | 7X-7729 | [2] | WASHER (11X25X3-MM THK) | |
| 43. | 8T-4121 | [11] | WASHER-HARD (11X21X2.5-MM THK) | |
| 44. | 8T-4122 | [2] | WASHER-HARD (17X32X3.5-MM THK) | |
| 45. | 8T-4136 M | [3] | BOLT (M10X1.5X25-MM) | |
| 46. | 8T-4137 M | [7] | BOLT (M10X1.5X20-MM) | |
| 47. | 8T-4172 M | [1] | BOLT (M10X1.5X80-MM) | |
| 48. | 8T-4181 M | [3] | BOLT (M6X1X20-MM) | |
| 49. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 50. | 8T-4896 | [1] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 51. | 9X-8256 | [3] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP66670311
386-9163: WIRING GP-ENGINE
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [1] | STRAP-CABLE | |
| 2. | 5C-2082 | [1] | SPACER (17X20X45-MM THK) | |
| 3. | 5I-3883 | [1] | BRACKET AS | |
| 4. | 7K-1181 | [10] | STRAP-CABLE | |
| 5. | 091-0081 | [1] | SPACER (10.5X20X10-MM THK) | |
| 6. | 097-0832 | [1] | SPACER (13.5X22X14-MM THK) | |
| 7. | 118-6878 | [1] | BRACKET AS | |
| 8. | 124-3019 | [3] | BRACKET AS | |
| 10. | 192-5017 | [1] | BRACKET AS | |
| 11. | 193-1730 | [1] | BRACKET AS | |
| 12. | 197-6453 | [1] | BRACKET AS | |
| 13. | 256-6453 | [1] | SENSOR-TEMPERATURE (2-PIN)(TORQUE CONVERTER OIL) | |
| 14. | 262-6019 | [1] | BRACKET AS | |
| 15. | 307-3119 C | [1] | CABLE AS | |
| 8C-3056 E | CABLE (2-GA, RED)(142-CM) | |||
| 8T-8827 | [1] | BOOT (RED) | ||
| 231-4476 | [1] | TERMINAL AS (DUAL HEAT) | ||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(4-CM) | |||
| 291-6819 | [1] | TERMINAL AS-RING | ||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(4-CM) | |||
| 16. | 399-3591 | [1] | CABLE AS | |
| 8C-0596 E | CABLE (2-GA)(86-CM) | |||
| 030-1712 | [1] | TERMINAL-RING (2-GA, 1/4-IN SCREW) | ||
| 180-7110 | [1] | TERMINAL-RING (2-GA, 3/8-IN SCREW) | ||
| 17. | 452-1434 CY | [1] | HARNESS AS-ENGINE (CHASSIS) | |
| 18. | 033-8248 | [1] | CLIP (LOOP) | |
| 19. | 067-2551 | [1] | CLIP | |
| 21. | 124-1479 | [7] | CLIP | |
| 22. | 130-5300 | [2] | CLIP | |
| 23. | 132-5789 | [2] | CLIP (LADDER) | |
| 24. | 134-2540 | [1] | RECEPTACLE AS-CONNECTOR | |
| 25. | 137-6722 | [2] | CLIP | |
| 26. | 3K-0360 | [1] | SEAL-O-RING | |
| 27. | 4D-7794 | [1] | CLIP | |
| 28. | 4K-8864 | [1] | CLIP (LOOP) | |
| 29. | 4L-6454 | [1] | BOLT (3/8-16X1-IN) | |
| 30. | 4L-9337 | [1] | BOLT (3/8-16X1.5-IN) | |
| 31. | 4P-7581 | [3] | CLIP (LADDER) | |
| 32. | 4P-8134 | [1] | CLIP (LADDER) | |
| 33. | 5M-3062 | [1] | BOLT (3/8-16X0.75-IN) | |
| 34. | 5P-2955 | [2] | BOLT (5/16-18X2.5-IN) | |
| 35. | 6D-4244 | [2] | CLIP (LOOP) | |
| 36. | 6V-8801 | [1] | NUT (3/8-16-THD) | |
| 37. | 7D-1728 | [1] | CLIP | |
| 38. | 7N-3718 | [1] | CLIP | |
| 39. | 7X-0274 | [2] | BOLT (5/16-18X2.75-IN) | |
| 40. | 7X-0343 | [1] | BOLT (5/8-11X1.25-IN) | |
| 41. | 7X-0349 | [1] | BOLT (5/8-11X3-IN) | |
| 42. | 7X-7729 | [2] | WASHER (11X25X3-MM THK) | |
| 43. | 8T-4121 | [11] | WASHER-HARD (11X21X2.5-MM THK) | |
| 44. | 8T-4122 | [2] | WASHER-HARD (17X32X3.5-MM THK) | |
| 45. | 8T-4136 M | [3] | BOLT (M10X1.5X25-MM) | |
| 46. | 8T-4137 M | [6] | BOLT (M10X1.5X20-MM) | |
| 47. | 8T-4172 M | [1] | BOLT (M10X1.5X80-MM) | |
| 49. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 50. | 8T-4896 | [1] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 51. | 8T-4195 M | [1] | BOLT (M10X1.5X30-MM) | |
| 52. | 204-2281 | [1] | STRAP-CABLE | |
| 53. | 204-8000 | [1] | MOUNTING-CABLE TIE | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP66670312
399-3654: WIRING GP-FRONT
399-3654 WIRING GP-FRONT
S/N PF81-UP
PART OF 394-3112 ELECTRICAL AR, 394-4168 WIRING GP-PROTECTION
S/N PF81-UP
PART OF 394-3112 ELECTRICAL AR, 394-4168 WIRING GP-PROTECTION
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5V-6153 | [2] | PLATE-COVER | |
| 2. | 399-3653 | [1] | HARNESS AS-FRONT CHASSIS | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (EACH RECPETACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5P-1506 E | HOSE (48-CM) | |||
| 8T-8737 | [8] | PLUG-SEAL | ||
| 113-0580 | [1] | RECEPTACLE AS-CONNECTOR (40-PIN) | ||
| 106-4155 | [1] | KIT-RETAINING BOLT | ||
| (INCLUDES BOLT, RING & SEAL) | ||||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(25-CM) | |||
| 9X-3402 | [35] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [35] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [41] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [41] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGES & INTERFACE SEAL) | ||||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [4] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2274 | [2] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS , WEDGE & INTERFACE SEAL) | ||||
| 274-3774 | [2] | CAP-CONNECTOR | ||
| 3. | 033-8248 | [8] | CLIP (LOOP) | |
| 4. | 130-5300 | [4] | CLIP | |
| 5. | 1S-0994 | [1] | CLIP (LOOP)(LOOP) | |
| 6. | 4D-7794 | [1] | CLIP | |
| 7. | 4K-8864 | [2] | CLIP (LOOP)(LOOP) | |
| 8. | 4P-7581 | [3] | CLIP (LADDER)(LADDER) | |
| 9. | 5V-6152 | [4] | CLAMP | |
| 10. | 6D-4244 | [4] | CLIP (LOOP)(LOOP) | |
| 11. | 7K-1181 | [6] | STRAP-CABLE | |
| 12. | 7V-5515 | [2] | SPACER (11X26.7X12-MM THK) | |
| 13. | 8M-2770 | [3] | CLIP (LOOP)(LOOP) | |
| 14. | 8M-2773 | [3] | CLIP (LOOP)(LOOP) | |
| 15. | 8T-3844 M | [4] | BOLT (M6X1X70-MM) | |
| 16. | 8T-4121 | [26] | WASHER-HARD (11X21X2.5-MM THK) | |
| 17. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 18. | 8T-4137 M | [22] | BOLT (M10X1.5X20-MM) | |
| 19. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 20. | 9M-8406 | [3] | CLIP (LOOP)(LOOP) | |
| 21. | 9X-8256 | [4] | WASHER (6.6X12X2-MM THK) | |
| 22. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP66670313
467-4173: WIRING GP-FRONT
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS#SEBP66670314
296-8073: WIRING GP-HEATER
296-8073 WIRING GP-HEATER -JACKET WATER
S/N PF81-UP
120-VOLT, 15-AMPERE
PART OF 328-9879 OPTION AR-COLD WEATHER
S/N PF81-UP
120-VOLT, 15-AMPERE
PART OF 328-9879 OPTION AR-COLD WEATHER
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9N-5253 | [1] | CORD AS-HEATER ELEMENT (120-VOLT, 15-AMPERE) |
#SEBP66670315
284-8612: WIRING GP-LIGHTING
284-8612 WIRING GP-LIGHTING
S/N PF81-UP
CUSTOM
PART OF 394-4181 PROTECTION AR-HEAT
S/N PF81-UP
CUSTOM
PART OF 394-4181 PROTECTION AR-HEAT
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2Q-0604 | INSULATION (84-CM) |
#SEBP66670316
373-0494: WIRING GP-LIGHTING
373-0494 WIRING GP-LIGHTING
S/N PF81-UP
PART OF 394-4083 LIGHTING AR-FLOOD & SIGNAL
S/N PF81-UP
PART OF 394-4083 LIGHTING AR-FLOOD & SIGNAL
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS#SEBP66670317
315-3591: WIRING GP-MONITOR
315-3591 WIRING GP-MONITOR
S/N PF81-UP
PART OF 447-7676 KIT-MONITOR, 391-4223 MONITOR GP-PAYLOAD
S/N PF81-UP
PART OF 447-7676 KIT-MONITOR, 391-4223 MONITOR GP-PAYLOAD
For full view, you need register
#SEBP66670318
394-4168: WIRING GP-PROTECTION
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 228-2704 Y | [1] | WIRING GP-SENSOR (TILT) | |
| 2. | 370-9488 | [36] | STRAP-CABLE | |
| 3. | 399-3654 Y | [1] | WIRING GP-FRONT | |
| 4. | 158-0851 | [1] | CLIP | |
| 5. | 1S-0994 | [21] | CLIP (LOOP) | |
| 6. | 1S-1015 | [4] | CLIP | |
| 7. | 4S-4455 | [5] | CLIP | |
| 8. | 6D-4244 | [2] | CLIP (LOOP) | |
| 9. | 6D-4246 | [1] | CLIP (LOOP) | |
| 10. | 6V-1889 | [7] | CLIP (LOOP) | |
| 11. | 8C-8533 | [4] | CLIP | |
| 12. | 8M-2773 | [2] | CLIP (LOOP) | |
| 13. | 9X-8250 | [6] | CLIP | |
| 14. | 2Q-0584 E | INSULATION (75.2-CM) | ||
| 14A. | 2Q-0584 E | INSULATION (20.3-CM) | ||
| 14B. | 2Q-0584 E | INSULATION (31.7-CM) | ||
| 14C. | 2Q-0584 E | INSULATION (16.2-CM) | ||
| 14D. | 2Q-0584 E | INSULATION (28.7-CM) | ||
| 14E. | 2Q-0584 E | INSULATION (55.5-CM) | ||
| 14F. | 2Q-0584 E | INSULATION (45-CM) | ||
| 14G. | 2Q-0584 E | INSULATION (174.5-CM) | ||
| 15. | 193-6911 E | INSULATION (137.5-CM) | ||
| 15A. | 193-6911 E | INSULATION (28.5-CM) | ||
| 15B. | 193-6911 E | INSULATION (30-CM) | ||
| 15C. | 193-6911 E | INSULATION (26.1-CM) | ||
| 15D. | 193-6911 E | INSULATION (25.7-CM) | ||
| 15E. | 193-6911 E | INSULATION (84-CM) | ||
| 15F. | 193-6911 E | INSULATION (54.3-CM) | ||
| 15G. | 193-6911 E | INSULATION (20.4-CM) | ||
| 15H. | 193-6911 E | INSULATION (90-CM) | ||
| 15J. | 193-6911 E | INSULATION (97-CM) | ||
| 16. | 2Q-0604 E | INSULATION (88.2-CM) | ||
| 16A. | 2Q-0604 E | INSULATION (12.7-CM) | ||
| 16B. | 2Q-0604 E | INSULATION (33.1-CM) | ||
| 16C. | 2Q-0604 E | INSULATION (13.5-CM) | ||
| 16D. | 2Q-0604 E | INSULATION (221-CM) | ||
| 16E. | 2Q-0604 E | INSULATION (91.6-CM) | ||
| 16F. | 2Q-0604 E | INSULATION (44.5-CM) | ||
| 16G. | 2Q-0604 E | INSULATION (171-CM) | ||
| 16H. | 2Q-0604 E | INSULATION (19.6-CM) | ||
| 16J. | 2Q-0604 E | INSULATION (68.5-CM) | ||
| 16K. | 2Q-0604 E | INSULATION (18.6-CM) | ||
| 16L. | 2Q-0604 E | INSULATION (15.1-CM) | ||
| ****STANDARD REMOVAL**** | ||||
| 130-5300 FH | [1] | CLIP | ||
| 130-5300 FJ | [4] | CLIP | ||
| 130-5300 FN | [1] | CLIP | ||
| 132-5789 FN | [1] | CLIP (LADDER) | ||
| 5P-9085 FN | [4] | CLIP (LOOP) | ||
| 5P-9297 FN | [1] | CLIP (LOOP) | ||
| 147-0385 FH | [1] | CLIP | ||
| 1S-0994 FJ | [1] | CLIP (LOOP) | ||
| 2Y-3812 FP | [1] | CLIP | ||
| 3S-8664 FH | [4] | CLIP (LOOP) | ||
| 4D-7794 FJ | [9] | CLIP | ||
| 4K-8864 FJ | [3] | CLIP (LOOP) | ||
| 4P-7581 FJ | [1] | CLIP (LADDER) | ||
| 5P-9085 FH | [1] | CLIP (LOOP) | ||
| 6D-4244 FJ | [4] | CLIP (LOOP) | ||
| 6V-2383 FL | [2] | CLIP | ||
| 5P-9085 FL | [1] | CLIP (LOOP) | ||
| 6V-3265 FL | [1] | CLIP | ||
| 7K-1181 FH | [1] | STRAP-CABLE | ||
| 7K-1181 FJ | [1] | STRAP-CABLE | ||
| 8M-2770 FJ | [3] | CLIP (LOOP) | ||
| 8M-2773 FJ | [3] | CLIP (LOOP) | ||
| 9M-8406 FJ | [2] | CLIP (LOOP) | ||
| 5P-9297 FH | [1] | CLIP (LOOP) | ||
| E | ORDER BY THE CENTIMETER | |||
| F | NOT SHOWN | |||
| H | FROM WIRING GP-SENSOR | |||
| J | FROM WIRING GP-FRONT | |||
| L | FROM WIRING GP-AXLE TEMPERATURE | |||
| N | FROM WIRING GP-CHASSIS | |||
| P | FROM WIRING GP-SECONDARY STEERING | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP66670319
418-7158: WIRING GP-SECONDARY STEERING
418-7158 WIRING GP-SECONDARY STEERING
S/N PF81-203
PART OF 394-3201 STEERING AR-SECONDARY
S/N PF81-203
PART OF 394-3201 STEERING AR-SECONDARY
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [5] | STRAP-CABLE | |
| 2. | 091-0081 | [1] | SPACER (10.5X20X10-MM THK) | |
| 3. | 9X-8267 | [1] | WASHER (6.6X12X2-MM THK) | |
| 4. | 209-5582 Y | [1] | SWITCH GP-MAGNETIC (24-VOLT) | |
| 5. | 218-4935 | [1] | SUPPRESSOR-ARC | |
| 6. | 262-6019 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 7. | 353-7957 | [17] | GROMMET | |
| 8. | 419-9072 | [1] | CABLE AS | |
| 6T-5598 | [1] | TERMINAL-RING (1-GA TO 2-GA, 5/16-IN SCREW) | ||
| 3L-6513 | [1] | TERMINAL-RING (1-GA TO 2-GA, 1/2-IN SCREW) | ||
| 8T-8827 | [1] | BOOT (RED) | ||
| 9. | 421-5889 Y | [1] | HARNESS AS-STEERING (PRIMARY PRESSURE SWITCH) | |
| 10. | 421-7682 | [1] | CABLE AS | |
| 6T-5598 | [1] | TERMINAL-RING (1-GA TO 2-GA, 5/16-IN SCREW) | ||
| 8T-8827 | [2] | BOOT (RED) | ||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(4-CM) | |||
| 311-6184 | [1] | TERMINAL-RING (2-GA, 3/8-IN SCREW) | ||
| 11. | 422-7032 | [1] | CABLE AS | |
| 3L-6513 | [1] | TERMINAL-RING (1-GA TO 2-GA, 1/2-IN SCREW) | ||
| 121-1110 | [1] | BOOT (BLACK) | ||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(4-CM) | |||
| 311-6184 | [1] | TERMINAL-RING (2-GA, 3/8-IN SCREW) | ||
| 12. | 431-9078 Y | [1] | HARNESS AS-STEERING (MOTOR SWITCH) | |
| 13. | 0T-0573 | [1] | BOLT (3/8-16X2.75-IN) | |
| 14. | 130-5300 | [5] | CLIP | |
| 15. | 133-6934 | [1] | SPACER (11X20X25-MM THK) | |
| 16. | 163-1802 | [2] | CLIP (LOOP) | |
| 17. | 2Y-3812 | [1] | CLIP | |
| 18. | 367-9074 | [1] | SWITCH AS-PRESSURE (PRIMARY STEERING) | |
| 18A. | 367-9074 | [1] | SWITCH AS-PRESSURE (SECONDARY STEERING) | |
| (EACH SWITCH AS INCLUDES) | ||||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1813 E | SLEEVE (28-CM) | |||
| 19. | 3E-5239 | [1] | RELAY AS (24-VOLT)(SECONDARY STEERING) | |
| 20. | 3J-1907 | [2] | SEAL-O-RING | |
| 21. | 4D-8123 | [3] | CLIP | |
| 22. | 4P-7581 | [1] | CLIP (LADDER)(LADDER) | |
| 23. | 4P-7582 | [1] | CLIP (LADDER) | |
| 24. | 6D-4246 | [17] | CLIP (LOOP)(LOOP) | |
| 25. | 6V-3265 | [3] | CLIP | |
| 26. | 6V-5230 M | [1] | BOLT (M10X1.5X60-MM) | |
| 27. | 6V-5839 | [1] | WASHER (11X21X2.5-MM THK) | |
| 28. | 6V-9632 M | [1] | NUT-WELD (M6X1-THD) | |
| 29. | 6W-6672 | [1] | SPACER (10.5X20X38-MM THK) | |
| 30. | 7X-2619 M | [2] | BOLT (M6X1X10-MM) | |
| 31. | 8T-4121 | [13] | WASHER-HARD (11X21X2.5-MM THK) | |
| 32. | 8T-4137 M | [11] | BOLT (M10X1.5X20-MM) | |
| 33. | 8T-4182 M | [1] | BOLT (M10X1.5X45-MM) | |
| 34. | 8T-4195 M | [1] | BOLT (M10X1.5X30-MM) | |
| 35. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 36. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 37. | 8T-4244 M | [1] | NUT (M12X1.75-THD) | |
| 38. | 8T-4970 M | [1] | BOLT (M6X1X14-MM) | |
| 39. | 9S-8752 | [2] | NUT-FULL (3/8-16-THD) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
