POWER TRAIN
COVER GP-SHIPPINGDIFFERENTIAL & BEVEL GEAR GP
POWER TRAIN
COVER GP-SHIPPING
#SEBP67160250
396-5185: COVER GP-SHIPPING
396-5185 COVER GP-SHIPPING -TRANSMISSION
S/N S4X1-UP
PART OF 396-5175 TRANSMISSION AR
S/N S4X1-UP
PART OF 396-5175 TRANSMISSION AR
For full view, you need register
Parts for your 950 GC WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7J-3554 | [3] | COVER | |
| 2. | 217-7024 | [1] | GASKET | |
| 3. | 8T-4137 M | [8] | BOLT (M10X1.5X20-MM) | |
| 4. | 8T-0293 M | [4] | BOLT (M12X1.75X20-MM) | |
| 5. | 396-5153 | [1] | GASKET | |
| 6. | 2D-0094 | [3] | GASKET | |
| 7. | 4S-5971 | [1] | COVER | |
| 8. | 6V-4249 M | [4] | BOLT (M10X1.5X50-MM) | |
| 9. | 7F-8268 | [1] | SEAL-O-RING | |
| 10. | 396-5151 | [1] | COVER | |
| M | METRIC PART | |||
#SEBP67160251
326-0532: DIFFERENTIAL & BEVEL GEAR GP
326-0532 DIFFERENTIAL & BEVEL GEAR GP
S/N M5K1-UP
PART OF 326-2071, 418-4768, 477-4567, 477-4568 DIFFERENTIAL & BEVEL GEAR GP
S/N M5K1-UP
PART OF 326-2071, 418-4768, 477-4567, 477-4568 DIFFERENTIAL & BEVEL GEAR GP
For full view, you need register
Parts for your 950 GC WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 217-3680 | [4] | WASHER-THRUST | |
| 2. | 8R-1703 | [4] | PINION-DIFFERENTIAL BEVEL (10-TEETH) | |
| 3. | 8R-1704 | [2] | GEAR-DIFFERENTIAL BEVEL (16-TEETH) | |
| 4. | 352-2346 | [2] | WASHER-THRUST | |
| 5. | 508-8369 | [1] | CASE AS-DIFFERENTIAL | |
| 8T-0207 M | [8] | BOLT (M16X2X100-MM) | ||
| 9X-8268 | [8] | WASHER (17.5X30X3.5-MM THK) | ||
| 6. | 486-8386 | [1] | SPIDER | |
| 7. | 135-2946 | [4] | BUSHING | |
| M | METRIC PART | |||
#SEBP67160252
326-2071: DIFFERENTIAL & BEVEL GEAR GP
326-2071 DIFFERENTIAL & BEVEL GEAR GP -WITH HOUSING
S/N M5K1-UP
PART OF 327-2256 AXLE AR-FIXED
S/N M5K1-UP
PART OF 327-2256 AXLE AR-FIXED
For full view, you need register
Parts for your 950 GC WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1J-2860 | [1] | CUP-BEARING | |
| 2. | 2D-9454 | [1] | CUP-BEARING | |
| 3. | 2D-9455 | [1] | CONE-BEARING | |
| 4. | 4H-6520 | [1] | SEAL-O-RING | |
| 5. | 5H-3701 | [2] | SCREW-PURGE | |
| 6. | 5P-4484 | [1] | PLUG-MAGNETIC (DIFFERENTIAL) | |
| 7. | 6G-4703 | [1] | NUT (5 1/4-12-THD) | |
| 8. | 6W-1638 | [1] | WASHER (71X95X5-MM THK) | |
| 9. | 6Y-2540 | [1] | CUP-BEARING | |
| 10. | 8T-0336 | [1] | FITTING-PRESSURE RELIEF | |
| 11. | 226-2684 B | [1] | SHIM PACK (INCLUDES 11-SHIMS) | |
| 12. | 9V-2429 | [1] | RETAINER | |
| 13. | 030-0061 | [1] | CONE-BEARING | |
| 14. | 112-0782 | [1] | YOKE | |
| 15. | 297-3211 | [1] | LOCK-BEARING | |
| 16. | 326-0532 Y | [1] | DIFFERENTIAL & BEVEL GEAR GP | |
| 17. | 326-4354 B | [1] | SHIM-PACK (INCLUDES 10-SHIMS) | |
| 18. | 327-2226 | [1] | HOUSING AS | |
| 095-0673 M | [4] | BOLT-SOCKET HEAD (M12X1.75X60-MM) | ||
| 19. | 327-2244 | [1] | HOUSING-PINION | |
| 20. | 327-8556 | [1] | RETAINER-SEAL | |
| 21. | 327-8692 | [1] | SET-BEVEL GEAR (40-TEETH) | |
| 22. | 030-0060 | [1] | CUP-BEARING | |
| 23. | 123-4003 | [1] | SEAL-LIP TYPE | |
| 24. | 259-2627 M | [24] | BOLT (M12X1.75X40-MM) | |
| 25. | 1J-4757 | [1] | CONE-BEARING | |
| 26. | 2H-3088 | [1] | SEAL-O-RING | |
| 27. | 5P-8245 | [24] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 28. | 5P-8247 | [10] | WASHER-HARD (17X32X3.5-MM THK) | |
| 29. | 6V-5686 M | [10] | BOLT (M16X2X50-MM) | |
| 30. | 6V-7732 M | [6] | BOLT (M10X1.5X25-MM) | |
| 31. | 6Y-2539 | [1] | CONE-BEARING | |
| 32. | 7M-8485 | [1] | SEAL-O-RING | |
| 33. | 8T-0372 M | [1] | BOLT (M12X1.75X90-MM) | |
| 34. | 9C-6041 | [3] | DOWEL | |
| 35. | 326-3737 | [1] | PLUG AS | |
| 326-3744 | [1] | PLUG | ||
| 8M-5248 | [2] | SEAL-O-RING | ||
| 36. | 9V-6563 | [1] | LOCKNUT (2.75X18-THD) | |
| 37. | 9X-2027 | [6] | WASHER (11X18X2-MM THK) | |
| 38. | 9X-2616 M | [1] | SCREW-SOCKET (M8X1.25X16-MM) | |
| 8C-8422 BF | SEALANT | |||
| B | USE AS REQUIRED | |||
| F | NOT SHOWN | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP67160253
418-4768: DIFFERENTIAL & BEVEL GEAR GP
418-4768 DIFFERENTIAL & BEVEL GEAR GP -WITH HOUSING
S/N M5K1-UP
PART OF 418-4767 AXLE AR-OSCILLATING
S/N M5K1-UP
PART OF 418-4767 AXLE AR-OSCILLATING
For full view, you need register
Parts for your 950 GC WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1J-2860 | [1] | CUP-BEARING | |
| 2. | 2D-9454 | [1] | CUP-BEARING | |
| 3. | 2D-9455 | [1] | CONE-BEARING | |
| 4. | 4H-6520 | [1] | SEAL-O-RING | |
| 5. | 5H-3701 | [2] | SCREW-PURGE | |
| 6. | 5P-4484 | [1] | PLUG-MAGNETIC (DIFFERENTIAL) | |
| 7. | 6G-4703 | [1] | NUT (5 1/4-12-THD) | |
| 8. | 6W-1638 | [1] | WASHER (71X95X5-MM THK) | |
| 9. | 6Y-2540 | [1] | CUP-BEARING | |
| 10. | 8T-0336 | [1] | FITTING-PRESSURE RELIEF | |
| 11. | 226-2684 B | [1] | SHIM PACK (INCLUDES 11-SHIMS) | |
| 12. | 030-0061 | [1] | CONE-BEARING | |
| 13. | 156-1151 | [1] | YOKE AS | |
| 7V-3791 | [1] | GUARD | ||
| 156-1153 | [1] | KIT-SERVICE | ||
| (INCLUDES CUP, SEAL, & RING) | ||||
| 14. | 297-3211 | [1] | LOCK-BEARING | |
| 15. | 326-0532 Y | [1] | DIFFERENTIAL & BEVEL GEAR GP | |
| 16. | 326-4354 B | [1] | SHIM-PACK (INCLUDES 10-SHIMS) | |
| 17. | 327-2246 | [1] | HOUSING AS | |
| 095-0673 M | [4] | BOLT-SOCKET HEAD (M12X1.75X60-MM) | ||
| 18. | 327-2251 | [1] | HOUSING-PINION | |
| 19. | 327-8556 | [1] | RETAINER-SEAL | |
| 20. | 512-1743 | [1] | GEAR SET-BEVEL | |
| (INCLUDES BEVEL GEAR & BEVEL PINION) | ||||
| 21. | 394-1681 | [1] | TRUNNION | |
| 22. | 030-0060 | [1] | CUP-BEARING | |
| 23. | 123-4003 | [1] | SEAL-LIP TYPE | |
| 24. | 259-2627 M | [24] | BOLT (M12X1.75X40-MM) | |
| 25. | 1J-4757 | [1] | CONE-BEARING | |
| 26. | 5P-8245 | [24] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 27. | 5P-8247 | [24] | WASHER-HARD (17X32X3.5-MM THK) | |
| 28. | 6V-5686 M | [24] | BOLT (M16X2X50-MM) | |
| 29. | 6V-7732 M | [6] | BOLT (M10X1.5X25-MM) | |
| 30. | 6Y-2539 | [1] | CONE-BEARING | |
| 31. | 7M-8485 | [1] | SEAL-O-RING | |
| 32. | 9C-6041 | [3] | DOWEL | |
| 33. | 9V-6563 | [1] | LOCKNUT (2.75X18-THD) | |
| 34. | 9X-2027 | [6] | WASHER (11X18X2-MM THK) | |
| 35. | 9X-2616 M | [1] | SCREW-SOCKET (M8X1.25X16-MM) | |
| 1U-8846 BF | SEALANT-GASKET | |||
| B | USE AS REQUIRED | |||
| F | NOT SHOWN | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP67160254
418-4769: DIFFERENTIAL & BEVEL GEAR GP
418-4769 DIFFERENTIAL & BEVEL GEAR GP -WITH HOUSING
S/N M5K1-UP
PART OF 394-1675 AXLE AR-FIXED
S/N M5K1-UP
PART OF 394-1675 AXLE AR-FIXED
For full view, you need register
Parts for your 950 GC WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1J-2860 | [1] | CUP-BEARING | |
| 2. | 2D-9454 | [1] | CUP-BEARING | |
| 3. | 2D-9455 | [1] | CONE-BEARING | |
| 4. | 4H-6520 | [1] | SEAL-O-RING | |
| 5. | 5H-3701 | [2] | SCREW-PURGE | |
| 6. | 5P-4484 | [1] | PLUG-MAGNETIC (DIFFERENTIAL) | |
| 7. | 6G-4703 | [1] | NUT (5 1/4-12-THD) | |
| 8. | 6W-1638 | [1] | WASHER (71X95X5-MM THK) | |
| 9. | 6Y-2540 | [1] | CUP-BEARING | |
| 10. | 8T-0336 | [1] | FITTING-PRESSURE RELIEF | |
| 11. | 226-2684 B | [1] | SHIM PACK (INCLUDES 11-SHIMS) | |
| 12. | 9V-2429 | [1] | RETAINER | |
| 13. | 030-0061 | [1] | CONE-BEARING | |
| 14. | 112-0782 | [1] | YOKE | |
| 15. | 297-3211 | [1] | LOCK-BEARING | |
| 16. | 326-3737 | [1] | PLUG AS | |
| 8M-5248 | [1] | SEAL-O-RING | ||
| 326-3744 | [1] | PLUG | ||
| 17. | 326-4354 B | [1] | SHIM-PACK (INCLUDES 10-SHIMS) | |
| 19. | 327-2244 | [1] | HOUSING-PINION | |
| 20. | 327-8556 | [1] | RETAINER-SEAL | |
| 21. | 512-1741 | [1] | GEAR SET-BEVEL | |
| (INCLUDES BEVEL GEAR & BEVEL PINION) | ||||
| 22. | 328-2266 | [1] | DIFFERENTIAL GP-LIMITED SLIP | |
| 23. | 030-0060 | [1] | CUP-BEARING | |
| 24. | 123-4003 | [1] | SEAL-LIP TYPE | |
| 25. | 259-2627 M | [24] | BOLT (M12X1.75X40-MM) | |
| 26. | 1J-4757 | [1] | CONE-BEARING | |
| 27. | 2H-3088 | [1] | SEAL-O-RING | |
| 28. | 5P-8245 | [24] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 29. | 5P-8247 | [10] | WASHER-HARD (17X32X3.5-MM THK) | |
| 30. | 178-3707 M | [10] | BOLT (M16X2X50-MM) | |
| 31. | 6V-7732 M | [6] | BOLT (M10X1.5X25-MM) | |
| 32. | 6Y-2539 | [1] | CONE-BEARING | |
| 33. | 7M-8485 | [1] | SEAL-O-RING | |
| 34. | 8T-0372 M | [1] | BOLT (M12X1.75X90-MM) | |
| 35. | 9C-6041 | [3] | DOWEL | |
| 36. | 9V-6563 | [1] | LOCKNUT (2.75X18-THD) | |
| 37. | 9X-2027 | [6] | WASHER (11X18X2-MM THK) | |
| 38. | 9X-2616 M | [1] | SCREW-SOCKET (M8X1.25X16-MM) | |
| 1U-8846 BF | SEALANT-GASKET | |||
| B | USE AS REQUIRED | |||
| F | NOT SHOWN | |||
| M | METRIC PART | |||
#SEBP67160255
418-4770: DIFFERENTIAL & BEVEL GEAR GP
418-4770 DIFFERENTIAL & BEVEL GEAR GP -WITH HOUSING
S/N M5K1-UP
PART OF 394-1676 AXLE AR-OSCILLATING
S/N M5K1-UP
PART OF 394-1676 AXLE AR-OSCILLATING
For full view, you need register
Parts for your 950 GC WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1J-2860 | [1] | CUP-BEARING | |
| 2. | 2D-9454 | [1] | CUP-BEARING | |
| 3. | 2D-9455 | [1] | CONE-BEARING | |
| 4. | 4H-6520 | [1] | SEAL-O-RING | |
| 5. | 5H-3701 | [2] | SCREW-PURGE | |
| 6. | 5P-4484 | [1] | PLUG-MAGNETIC (DIFFERENTIAL) | |
| 7. | 6G-4703 | [1] | NUT (5 1/4-12-THD) | |
| 8. | 6W-1638 | [1] | WASHER (71X95X5-MM THK) | |
| 9. | 6Y-2540 | [1] | CUP-BEARING | |
| 10. | 8T-0336 | [1] | FITTING-PRESSURE RELIEF | |
| 11. | 226-2684 B | [1] | SHIM PACK (INCLUDES 11-SHIMS) | |
| 12. | 030-0061 | [1] | CONE-BEARING | |
| 13. | 156-1151 | [1] | YOKE AS | |
| 7V-3791 | [1] | GUARD | ||
| 156-1153 | [1] | KIT-SERVICE (YOKE) | ||
| (KIT INCLUDES CAP, SEAL & RING) | ||||
| 14. | 297-3211 | [1] | LOCK-BEARING | |
| 15. | 326-4354 B | [1] | SHIM-PACK (INCLUDES 10-SHIMS) | |
| 16. | 327-2246 | [1] | HOUSING AS | |
| 095-0673 M | [4] | BOLT-SOCKET HEAD (M12X1.75X60-MM) | ||
| 17. | 327-2251 | [1] | HOUSING-PINION | |
| 18. | 327-8556 | [1] | RETAINER-SEAL | |
| 19. | 328-2266 | [1] | DIFFERENTIAL GP-LIMITED SLIP | |
| 20. | 376-6533 | [1] | SET-BEVEL GEAR (40 TEETH) | |
| 21. | 394-1681 | [1] | TRUNNION | |
| 22. | 030-0060 | [1] | CUP-BEARING | |
| 23. | 123-4003 | [1] | SEAL-LIP TYPE | |
| 24. | 259-2627 M | [24] | BOLT (M12X1.75X40-MM) | |
| 25. | 1J-4757 | [1] | CONE-BEARING | |
| 26. | 5P-8245 | [24] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 27. | 5P-8247 | [24] | WASHER-HARD (17X32X3.5-MM THK) | |
| 28. | 6V-5686 M | [24] | BOLT (M16X2X50-MM) | |
| 29. | 6V-7732 M | [6] | BOLT (M10X1.5X25-MM) | |
| 30. | 6Y-2539 | [1] | CONE-BEARING | |
| 31. | 7M-8485 | [1] | SEAL-O-RING | |
| 32. | 9C-6041 | [3] | DOWEL | |
| 33. | 9V-6563 | [1] | LOCKNUT (2.75X18-THD) | |
| 34. | 9X-2027 | [6] | WASHER (11X18X2-MM THK) | |
| 35. | 9X-2616 M | [1] | SCREW-SOCKET (M8X1.25X16-MM) | |
| 8C-8422 BF | SEALANT | |||
| B | USE AS REQUIRED | |||
| F | NOT SHOWN | |||
| M | METRIC PART | |||
#SEBP67160256
477-4567: DIFFERENTIAL & BEVEL GEAR GP
477-4567 DIFFERENTIAL & BEVEL GEAR GP
S/N M5K1-UP
PART OF 476-8791 AXLE AR-FIXED
S/N M5K1-UP
PART OF 476-8791 AXLE AR-FIXED
For full view, you need register
Parts for your 950 GC WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5H-3701 | [2] | SCREW-PURGE | |
| 2. | 6G-4703 | [1] | NUT (5 1/4-12-THD) | |
| 3. | 6W-1638 | [1] | WASHER (71X95X5-MM THK) | |
| 4. | 226-2684 B | [1] | SHIM PACK (INCLUDES 11-SHIMS) | |
| 5. | 030-0060 | [1] | CUP-BEARING | |
| 6. | 030-0061 | [1] | CONE-BEARING | |
| 7. | 112-0782 | [1] | YOKE | |
| 8. | 297-3211 | [2] | LOCK-BEARING | |
| 9. | 326-0532 Y | [1] | DIFFERENTIAL & BEVEL GEAR GP | |
| 10. | 326-3737 | [3] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 8M-5248 | [1] | SEAL-O-RING | ||
| 326-3744 | [1] | PLUG | ||
| 11. | 511-2136 | [1] | HOUSING-PINION | |
| 12. | 327-8556 | [1] | RETAINER-SEAL | |
| 13. | 512-1741 | [1] | GEAR SET-BEVEL | |
| 14. | 510-7251 | [1] | HOUSING AS | |
| 095-0673 M | [4] | BOLT-SOCKET HEAD (M12X1.75X60-MM) | ||
| 15. | 477-2772 | [1] | NUT | |
| 16. | 123-4003 | [1] | SEAL-LIP TYPE | |
| 17. | 259-2627 M | [24] | BOLT (M12X1.75X40-MM) | |
| 18. | 1J-2860 | [1] | CUP-BEARING | |
| 19. | 1J-4757 | [1] | CONE-BEARING | |
| 20. | 2D-9454 | [1] | CUP-BEARING | |
| 21. | 2D-9455 | [1] | CONE-BEARING | |
| 22. | 2H-3088 | [1] | SEAL-O-RING | |
| 23. | 4H-6520 | [1] | SEAL-O-RING | |
| 24. | 165-4929 | [1] | PLUG AS-MAGNETIC (DRAIN) | |
| 5P-4484 | [1] | PLUG-MAGNETIC (DRAIN) | ||
| 7M-8485 | [1] | SEAL-O-RING | ||
| 25. | 5P-8245 | [24] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 26. | 5P-8247 | [10] | WASHER-HARD (17X32X3.5-MM THK) | |
| 27. | 6V-5215 M | [2] | BOLT (M8X1.25X16-MM) | |
| 28. | 6V-5686 M | [10] | BOLT (M16X2X50-MM) | |
| 29. | 6V-7732 M | [6] | BOLT (M10X1.5X25-MM) | |
| 30. | 6Y-2539 | [1] | CONE-BEARING | |
| 31. | 6Y-2540 | [1] | CUP-BEARING | |
| 32. | 9X-2027 | [6] | WASHER (11X18X2-MM THK) | |
| 33. | 8T-0336 | [1] | FITTING-PRESSURE RELIEF | |
| 34. | 8T-0372 M | [1] | BOLT (M12X1.75X90-MM) | |
| 35. | 9C-6041 | [3] | DOWEL | |
| 36. | 9V-2429 | [1] | RETAINER | |
| 37. | 9V-6563 | [1] | LOCKNUT (2.75X18-THD) | |
| 1U-8846 BF | SEALANT-GASKET | |||
| B | USE AS REQUIRED | |||
| F | NOT SHOWN | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP67160257
477-4568: DIFFERENTIAL & BEVEL GEAR GP
477-4568 DIFFERENTIAL & BEVEL GEAR GP
S/N M5K1-UP
PART OF 476-8793 AXLE AR-OSCILLATING
S/N M5K1-UP
PART OF 476-8793 AXLE AR-OSCILLATING
For full view, you need register
Parts for your 950 GC WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5H-3701 | [2] | SCREW-PURGE | |
| 2. | 6G-4703 | [1] | NUT (5 1/4-12-THD) | |
| 3. | 6W-1638 | [1] | WASHER (71X95X5-MM THK) | |
| 4. | 8T-0336 | [1] | FITTING-PRESSURE RELIEF | |
| 5. | 226-2684 B | [1] | SHIM PACK (INCLUDES 11-SHIMS) | |
| 6. | 030-0060 | [1] | CUP-BEARING | |
| 7. | 030-0061 | [1] | CONE-BEARING | |
| 8. | 156-1151 | [1] | YOKE AS | |
| 7V-3791 | [1] | GUARD | ||
| 156-1153 | [1] | KIT-SERVICE | ||
| (INCLUDES CUP-DUST, SEAL & RING-SNAP) | ||||
| 9. | 165-4929 | [1] | PLUG AS-MAGNETIC (DRAIN) | |
| 5P-4484 | [1] | PLUG-MAGNETIC (DRAIN) | ||
| 7M-8485 | [1] | SEAL-O-RING | ||
| 10. | 297-3211 | [2] | LOCK-BEARING | |
| 11. | 326-0532 Y | [1] | DIFFERENTIAL & BEVEL GEAR GP | |
| 12. | 326-3737 | [2] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 8M-5248 | [1] | SEAL-O-RING | ||
| 326-3744 | [1] | PLUG | ||
| 13. | 327-8556 | [1] | RETAINER-SEAL | |
| 14. | 477-2772 | [1] | NUT | |
| 15. | 510-2637 | [1] | TRUNNION | |
| 16. | 510-7254 | [1] | HOUSING AS | |
| (INCLUDES PARTS MARKED "H" IN GRAPHIC) | ||||
| 095-0673 M | [4] | BOLT-SOCKET HEAD (M12X1.75X60-MM) | ||
| 17. | 510-9921 | [1] | HOUSING-PINION | |
| 18. | 512-1743 | [1] | GEAR SET-BEVEL | |
| (INCLUDES PARTS MARKED "J" IN GRAPHIC) | ||||
| 19. | 123-4003 | [1] | SEAL-LIP TYPE | |
| 20. | 259-2627 M | [24] | BOLT (M12X1.75X40-MM) | |
| 21. | 1J-2860 | [1] | CUP-BEARING | |
| 22. | 1J-4757 | [1] | CONE-BEARING | |
| 23. | 2D-9454 | [1] | CUP-BEARING | |
| 24. | 2D-9455 | [1] | CONE-BEARING | |
| 25. | 4H-6520 | [1] | SEAL-O-RING | |
| 26. | 5P-8245 | [24] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 27. | 5P-8247 | [24] | WASHER-HARD (17X32X3.5-MM THK) | |
| 28. | 6V-5215 M | [2] | BOLT (M8X1.25X16-MM) | |
| 29. | 6V-5686 M | [24] | BOLT (M16X2X50-MM) | |
| 30. | 6V-7732 M | [6] | BOLT (M10X1.5X25-MM) | |
| 31. | 6Y-2539 | [1] | CONE-BEARING | |
| 32. | 6Y-2540 | [1] | CUP-BEARING | |
| 33. | 9C-6041 | [3] | DOWEL | |
| 34. | 9V-6563 | [1] | LOCKNUT (2.75X18-THD) | |
| 35. | 9X-2027 | [6] | WASHER (11X18X2-MM THK) | |
| 1U-8846 BF | SEALANT-GASKET | |||
| B | USE AS REQUIRED | |||
| F | NOT SHOWN | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP67160258
477-4572: DIFFERENTIAL & BEVEL GEAR GP
477-4572 DIFFERENTIAL & BEVEL GEAR GP
S/N M5K1-UP
PART OF 476-8794 AXLE AR-FIXED
S/N M5K1-UP
PART OF 476-8794 AXLE AR-FIXED
For full view, you need register
Parts for your 950 GC WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5H-3701 | [2] | SCREW-PURGE | |
| 2. | 165-4929 | [1] | PLUG AS-MAGNETIC (DRAIN) | |
| 5P-4484 | [1] | PLUG-MAGNETIC (DRAIN) | ||
| 7M-8485 | [1] | SEAL-O-RING | ||
| 3. | 6G-4703 | [1] | NUT (5 1/4-12-THD) | |
| 4. | 6W-1638 | [1] | WASHER (71X95X5-MM THK) | |
| 5. | 8T-0336 | [1] | FITTING-PRESSURE RELIEF | |
| 6. | 226-2684 B | [1] | SHIM PACK (INCLUDES 11-SHIMS) | |
| 7. | 9V-2429 | [1] | RETAINER | |
| 8. | 030-0060 | [1] | CUP-BEARING | |
| 9. | 030-0061 | [1] | CONE-BEARING | |
| 10. | 112-0782 | [1] | YOKE | |
| 11. | 297-3211 | [2] | LOCK-BEARING | |
| 12. | 326-3737 | [3] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 8M-5248 | [1] | SEAL-O-RING | ||
| 326-3744 | [1] | PLUG | ||
| 13. | 511-2136 | [1] | HOUSING-PINION | |
| 14. | 327-8556 | [1] | RETAINER-SEAL | |
| 15. | 512-1741 | [1] | GEAR SET-BEVEL | |
| 16. | 328-2266 | [1] | DIFFERENTIAL GP-LIMITED SLIP | |
| 17. | 510-7251 | [1] | HOUSING AS | |
| 095-0673 M | [4] | BOLT-SOCKET HEAD (M12X1.75X60-MM) | ||
| 18. | 477-2772 | [1] | NUT | |
| 19. | 123-4003 | [1] | SEAL-LIP TYPE | |
| 20. | 259-2627 M | [24] | BOLT (M12X1.75X40-MM) | |
| 21. | 1J-2860 | [1] | CUP-BEARING | |
| 22. | 1J-4757 | [1] | CONE-BEARING | |
| 23. | 2D-9454 | [1] | CUP-BEARING | |
| 24. | 2D-9455 | [1] | CONE-BEARING | |
| 25. | 2H-3088 | [1] | SEAL-O-RING | |
| 26. | 4H-6520 | [1] | SEAL-O-RING | |
| 27. | 5P-8245 | [24] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 28. | 5P-8247 | [10] | WASHER-HARD (17X32X3.5-MM THK) | |
| 29. | 6V-5215 M | [2] | BOLT (M8X1.25X16-MM) | |
| 30. | 6V-5686 M | [10] | BOLT (M16X2X50-MM) | |
| 31. | 6V-7732 M | [6] | BOLT (M10X1.5X25-MM) | |
| 32. | 6Y-2539 | [1] | CONE-BEARING | |
| 33. | 6Y-2540 | [1] | CUP-BEARING | |
| 34. | 9X-2027 | [6] | WASHER (11X18X2-MM THK) | |
| 35. | 8T-0372 M | [1] | BOLT (M12X1.75X90-MM) | |
| 36. | 9C-6041 | [3] | DOWEL | |
| 37. | 9V-6563 | [1] | LOCKNUT (2.75X18-THD) | |
| 1U-8846 BF | SEALANT-GASKET | |||
| B | USE AS REQUIRED | |||
| F | NOT SHOWN | |||
| M | METRIC PART | |||
#SEBP67160259
477-4573: DIFFERENTIAL & BEVEL GEAR GP
477-4573 DIFFERENTIAL & BEVEL GEAR GP
S/N M5K1-UP
PART OF 476-8795 AXLE AR-OSCILLATING
S/N M5K1-UP
PART OF 476-8795 AXLE AR-OSCILLATING
For full view, you need register
Parts for your 950 GC WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5H-3701 | [2] | SCREW-PURGE | |
| 2. | 165-4929 | [1] | PLUG AS-MAGNETIC (DRAIN) | |
| 5P-4484 | [1] | PLUG-MAGNETIC (DRAIN) | ||
| 7M-8485 | [1] | SEAL-O-RING | ||
| 3. | 6G-4703 | [1] | NUT (5 1/4-12-THD) | |
| 4. | 6W-1638 | [1] | WASHER (71X95X5-MM THK) | |
| 5. | 8T-0336 | [1] | FITTING-PRESSURE RELIEF | |
| 6. | 226-2684 B | [1] | SHIM PACK (INCLUDES 11-SHIMS) | |
| 7. | 030-0060 | [1] | CUP-BEARING | |
| 8. | 030-0061 | [1] | CONE-BEARING | |
| 9. | 156-1151 | [1] | YOKE AS | |
| 156-1153 | [1] | KIT-SERVICE | ||
| (INCLUDES CUP, RING, & SEAL) | ||||
| 7V-3791 | [1] | GUARD | ||
| 10. | 297-3211 | [2] | LOCK-BEARING | |
| 11. | 326-3737 | [2] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 8M-5248 | [1] | SEAL-O-RING | ||
| 326-3744 | [1] | PLUG | ||
| 12. | 510-9921 | [1] | HOUSING-PINION | |
| 13. | 327-8556 | [1] | RETAINER-SEAL | |
| 14. | 328-2266 | [1] | DIFFERENTIAL GP-LIMITED SLIP | |
| 15. | 512-1743 | [1] | GEAR SET-BEVEL | |
| 16. | 510-2637 | [1] | TRUNNION | |
| 17. | 510-7254 | [1] | HOUSING AS | |
| 095-0673 M | [4] | BOLT-SOCKET HEAD (M12X1.75X60-MM) | ||
| 18. | 477-2772 | [1] | NUT | |
| 19. | 123-4003 | [1] | SEAL-LIP TYPE | |
| 20. | 259-2627 M | [24] | BOLT (M12X1.75X40-MM) | |
| 21. | 1J-2860 | [1] | CUP-BEARING | |
| 22. | 1J-4757 | [1] | CONE-BEARING | |
| 23. | 2D-9454 | [1] | CUP-BEARING | |
| 24. | 2D-9455 | [1] | CONE-BEARING | |
| 25. | 4H-6520 | [1] | SEAL-O-RING | |
| 26. | 5P-8245 | [24] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 27. | 5P-8247 | [24] | WASHER-HARD (17X32X3.5-MM THK) | |
| 28. | 6V-5215 M | [2] | BOLT (M8X1.25X16-MM) | |
| 29. | 6V-5686 M | [24] | BOLT (M16X2X50-MM) | |
| 30. | 6V-7732 M | [6] | BOLT (M10X1.5X25-MM) | |
| 31. | 6Y-2539 | [1] | CONE-BEARING | |
| 32. | 6Y-2540 | [1] | CUP-BEARING | |
| 33. | 9X-2027 | [6] | WASHER (11X18X2-MM THK) | |
| 34. | 9C-6041 | [3] | DOWEL | |
| 35. | 9V-6563 | [1] | LOCKNUT (2.75X18-THD) | |
| 1U-8846 BF | SEALANT-GASKET | |||
| B | USE AS REQUIRED | |||
| F | NOT SHOWN | |||
| M | METRIC PART | |||
