WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)BUCKET GP
WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
#SEBP67160650
257-1766: ADAPTER GP-TIP
For full view, you need register
Parts for your 950 GC WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2J-5997 | [4] | LOCKNUT (1-1/4-7-THD) | |
| 2. | 8J-2933 | [12] | NUT (1-8-THD) | |
| 3. | 222-1087 | [6] | ADAPTER-TIP (K-80, 2-STRAP, CENTER) | |
| 4. | 222-1088 | [1] | ADAPTER-TIP (K-80, RH) | |
| 5. | 222-1089 | [1] | ADAPTER-TIP (K-80, LH) | |
| 6. | 5P-8136 | [12] | BOLT-PLOW (1-8X4-IN) | |
| 7. | 6V-6535 | [2] | BOLT-PLOW (1-1/4-7X3.74-IN) | |
| 8. | 8T-9079 | [2] | BOLT-PLOW (1-1/4-7X3.35-IN) |
#SEBP67160651
539-5785: ADAPTER GP-TIP
For full view, you need register
Parts for your 950 GC WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 505-4029 | [6] | ADAPTER-TIP (CENTER) | |
| 2. | 505-4032 | [1] | ADAPTER-TIP (RH) | |
| 3. | 505-4033 | [1] | ADAPTER-TIP (LH) | |
| 4. | 2J-5997 | [4] | LOCKNUT (1-1/4-7-THD) | |
| 5. | 5P-8136 | [12] | BOLT-PLOW (1-8X4-IN) | |
| 6. | 6V-6535 | [2] | BOLT-PLOW (1-1/4-7X3.74-IN) | |
| 7. | 6V-8360 | [2] | BOLT-PLOW (1-1/4-7X4.53-IN) | |
| 8. | 8J-2933 | [12] | NUT (1-8-THD) |
#SEBP67160652
505-4029: ADAPTER-TIP
For full view, you need register
Parts for your 950 GC WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP67160653
505-4030: ADAPTER-TIP
For full view, you need register
Parts for your 950 GC WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP67160654
505-4032: ADAPTER-TIP
For full view, you need register
Parts for your 950 GC WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP67160655
505-4033: ADAPTER-TIP
For full view, you need register
Parts for your 950 GC WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP67160656
489-4529: BIT-END
489-4529 BIT-END
S/N M5K1-UP
S/N M5K1-UP
For full view, you need register
Parts for your 950 GC WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP67160657
477-9317: BUCKET AR-MATERIAL HANDLING
477-9317 BUCKET AR-MATERIAL HANDLING
S/N M5K1-UP
S/N M5K1-UP
For full view, you need register
Parts for your 950 GC WHEEL LOADER:
CATERPILLAR SIS#SEBP67160658
485-7016: BUCKET AR-MATERIAL HANDLING
485-7016 BUCKET AR-MATERIAL HANDLING
S/N M5K1-UP
S/N M5K1-UP
For full view, you need register
Parts for your 950 GC WHEEL LOADER:
CATERPILLAR SIS#SEBP67160659
384-5554: BUCKET AS-GENERAL PURPOSE
384-5554 BUCKET AS-GENERAL PURPOSE
S/N M5K1-UP
2.87-CU M (3.75-CU YD). 3.1-CU M (4.00-CU YD) W/BOLT-ON CUTTING EDGES
PART OF 382-9834, 559-9421 BUCKET GP-GENERAL PURPOSE
S/N M5K1-UP
2.87-CU M (3.75-CU YD). 3.1-CU M (4.00-CU YD) W/BOLT-ON CUTTING EDGES
PART OF 382-9834, 559-9421 BUCKET GP-GENERAL PURPOSE
For full view, you need register
Parts for your 950 GC WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 141-4847 | [1] | EDGE | |
| 2. | 384-5556 | [1] | PLATE AS-SIDE (RH) | |
| 2A. | 2C-9259 | [1] | PLATE-IDENTIFICATION (CAT) | |
| 2B. | 8E-5300 | [1] | CORNER (RH) | |
| 2C. | 384-5573 | [1] | PLATE-SIDE BAR | |
| 2D. | 384-5574 | [1] | PLATE-WEAR | |
| 3. | 384-5557 | [1] | PLATE AS-SIDE (LH) | |
| 3A. | 2C-9259 | [1] | PLATE-IDENTIFICATION (CAT) | |
| 3B. | 8E-5301 | [1] | CORNER (LH) | |
| 3C. | 384-5573 | [1] | PLATE-SIDE BAR | |
| 3D. | 384-5574 | [1] | PLATE-WEAR | |
| 4. | 384-5559 | [1] | PLATE-WEAR | |
| 5. | 384-5560 | [2] | PLATE-HOOK | |
| 6. | 384-5568 | [2] | PLATE-WEAR |
