AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

346-3859 INSTALLATION GP-RADIO -CITIZEN BAND S/N RWB1-UP PART OF 525-6498 CAB AR, 376-5201, 488-4053 DISTRIBUTION AR 824K


OPERATOR STATION
RADIO GP
CAB GP
AIR CONDITIONER GP
HEATER GP
AIR CONDITIONER GP
CAB GP

WHEEL DOZER 824K WHEEL DOZER RWB
 824K Wheel Dozer RWB00001-UP (MACHINE) POWERED BY C15 Engine SEBP6718 824K RWB   (2014)

OPERATOR STATION

RADIO GP
INSTALLATION GP-RADIO
310-6000 INSTALLATION GP-RADIO
INSTALLATION GP-RADIO
346-3859 INSTALLATION GP-RADIO
RADIO GP
288-1744 RADIO GP
RADIO GP
452-1394 RADIO GP
 

#SEBP67180660
 

346-3859: INSTALLATION GP-RADIO

346-3859 INSTALLATION GP-RADIO -CITIZEN BAND
S/N RWB1-UP
PART OF 525-6498 CAB AR, 376-5201, 488-4053 DISTRIBUTION AR
i05307569 SEBP6718
3463859 INSTALLATION GP-RADIO Parts scheme
  For full view, you need register

Parts for your 824K WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9U-2332 [1] ANTENNA AS (CB)  
2. 9U-4431 [1] MOUNT-ANTENNA  
3. 191-5114 [1] CABLE AS (COAX)  
4. 208-3779 [1] BRACKET AS  
5. 303-8524 Y [1] HARNESS AS-RADIO (CITIZEN BAN)  
6. 340-7161 [1] CONVERTER-POWER (24-VOLT TO 12-VOLT)  
7. 378-8645 [2] BRACKET  
8. 3S-2093 [1] STRAP-CABLE  
9. 5C-2874 M [2] NUT (M5X0.8-THD)  
10. 5C-9553 M [4] BOLT (M6X1X16-MM)  
11. 6V-7357 M [2] BOLT (M6X1X25-MM)  
12. 7K-1181 [15] STRAP-CABLE  
13. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP67180661
 

371-9549: LINER GP-CAB

371-9549 LINER GP-CAB
S/N RWB1-128
PART OF 383-2179, 525-6498 CAB AR
i05297782 SEBP6718
3719549 LINER GP-CAB Parts scheme 3719549 LINER GP-CAB Parts scheme 3719549 LINER GP-CAB Parts scheme 3719549 LINER GP-CAB Parts scheme
  For full view, you need register

Parts for your 824K WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 466-1621 [2] HOOK-COAT  
2. 7K-1181 [4] STRAP-CABLE  
3. 8Y-6388 [8] LOUVER AS-VENT  
4. 117-6838 [1] STUD  
5. 164-8473 [6] LOUVER AS  
6. 209-0746 [1] STRAP  
7. 234-6498 [6] RIVET  
8. 240-2169 [2] RETAINER  
9. 339-0965 [2] STRAP  
10. 340-2582 [2] LINER (CUP HOLDER)  
11. 341-9811 [1] LINER  
12. 342-0064 [1] NET AS  
13. 371-9555 [1] COVER AS  
14. 371-9559 [1] COVER AS  
15. 371-9570 [1] COVER  
16. 371-9578 [1] DUCT AS  
17. 371-9582 [1] DUCT AS (LH)  
18. 371-9586 [1] DUCT AS (RH)  
19. 371-9587 [1] DASH AS  
20. 371-9591 [1] LINER AS-CAB  
21. 379-3450 [1] HEADLINER  
22. 379-3471 [1] COVER  
23. 382-6956 [1] FLOOR MAT-FRONT  
24. 382-6957 [1] FLOOR MAT-REAR  
25. 382-9323 [1] HEADLINER  
26. 385-7190 [1] FLOOR MAT  
27. 419-6870 [1] DUCT  
28. 424-6355 [1] NET AS-STORAGE  
29. 435-4863 [1] TRAY  
30. 492-9134 [1] BEZEL  
31. 459-1202 [1] COVER-POST  
32. 459-1203 [1] COVER AS (REAR)  
33. 459-1204 [1] COVER AS (LOWER, RH)  
34. 459-1205 [1] PANEL  
35. 459-1206 [1] COVER-FUSE  
36. 459-1208 [1] PANEL AS  
37. 459-1209 [1] COVER AS (CONSOLE)  
38. 459-1211 [1] COVER AS (UPPER, LH)  
39. 460-4676 [1] DUCT AS  
40. 480-6461 [1] PLATE  
41. 104-2091 [40] SCREW-FLAT HEAD (6-20X0.5-IN)  
42. 114-6658 [50] WASHER (6.5X17X1-MM THK)  
43. 121-9870 M [3] SCREW-MACHINE (M6X1X40-MM)  
44. 200-1131 M [7] SCREW-TRUSS HEAD (M4X0.7X20-MM)  
45. 2V-2015 [1] NUT-SPEED  
46. 344-5675 M [3] NUT (M10X1.5-THD)  
47. 3E-8020 M [4] SCREW-TRUSS HEAD (M6X1X25-MM)  
48. 172-8591 M [38] NUT-CLIP (M6X1-THD)  
49. 7X-0579 [32] WASHER-HARD (8.8X25.5X2-MM THK)  
50. 7X-7729 [1] WASHER (11X25X3-MM THK)  
51. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
52. 8T-4186 M [3] BOLT (M10X1.5X40-MM)  
53. 8T-4222 [3] WASHER-PLATED (11X32X2.5-MM THK)  
54. 9V-3940 [1] RETAINER  
55. 9X-2038 [1] WASHER (7X19X2-MM THK)  
56. 9X-2044 M [18] SCREW-TRUSS HEAD (M6X1X16-MM)  
57. 9X-2045 M [59] SCREW-TRUSS HEAD (M6X1X20-MM)  
58. 9X-2046 M [2] SCREW-TRUSS HEAD (M6X1X35-MM)  
59. 148-7361 E FASTENER-HOOK & LOOP (ADHESIVE BACKED)(3-CM)  
60. 148-7362 E FASTENER-HOOK & LOOP (ADHESIVE BACKED)(3-CM)  
61. 219-4361 E TUBING (FLEX)(50-CM)  
61A. 219-4361 E TUBING (FLEX)(44-CM)  
62. 5P-5639 D SEAL (1.2-M)  
63. 284-3953 J SEAL (6.1-DM)  
63A. 284-3953 J SEAL (7.2-DM)  
63B. 284-3953 J SEAL (6.2-DM)  
63C. 284-3953 J SEAL (3.3-DM)  
63D. 284-3953 J SEAL (4.3-DM)  
64. 6V-5746 D TRIM (0.3-M EACH)  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  J   ORDER BY THE DECIMETER
  M   METRIC PART
 

#SEBP67180662
 

371-9549: LINER GP-CAB

371-9549 LINER GP-CAB
S/N RWB131-UP
PART OF 525-6498 CAB AR
i07165637 SEBP6718
3719549 LINER GP-CAB Parts scheme 3719549 LINER GP-CAB Parts scheme 3719549 LINER GP-CAB Parts scheme 3719549 LINER GP-CAB Parts scheme
  For full view, you need register

Parts for your 824K WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 466-1621 [2] HOOK-COAT  
2. 7K-1181 [4] STRAP-CABLE  
3. 422-2152 [8] LOUVER AS-VENT  
4. 117-6838 [1] STUD  
5. 164-8473 [6] LOUVER AS  
6. 209-0746 [1] STRAP  
7. 234-6498 [6] RIVET  
8. 240-2169 [2] RETAINER  
9. 339-0965 [2] STRAP  
10. 340-2582 [2] LINER (CUP HOLDER)  
11. 341-9811 [1] LINER  
12. 342-0064 [1] NET AS  
13. 371-9555 [1] COVER AS  
14. 371-9559 [1] COVER AS  
15. 371-9570 [1] COVER  
16. 371-9578 [1] DUCT AS  
17. 371-9582 [1] DUCT AS (LH)  
18. 371-9586 [1] DUCT AS (RH)  
19. 371-9587 [1] DASH AS  
20. 371-9591 [1] LINER AS-CAB  
21. 532-8873 C [1] HEADLINER  
22. 379-3471 [1] COVER  
23. 382-6956 [1] FLOOR MAT-FRONT  
24. 382-6957 [1] FLOOR MAT-REAR  
25. 382-9323 [1] HEADLINER  
26. 385-7190 [1] FLOOR MAT  
27. 533-1589 C [1] DUCT  
28. 424-6355 [1] NET AS-STORAGE  
29. 435-4863 [1] TRAY  
30. 492-9134 [1] BEZEL  
31. 459-1202 [1] COVER-POST  
32. 459-1203 [1] COVER AS (REAR)  
33. 459-1204 [1] COVER AS (LOWER, RH)  
34. 459-1205 [1] PANEL  
35. 459-1206 [1] COVER-FUSE  
36. 459-1208 [1] PANEL AS  
37. 459-1209 [1] COVER AS (CONSOLE)  
38. 459-1211 [1] COVER AS (UPPER, LH)  
39. 460-4676 [1] DUCT AS  
40. 480-6461 [1] PLATE  
41. 104-2091 [40] SCREW-FLAT HEAD (6-20X0.5-IN)  
42. 114-6658 [50] WASHER (6.5X17X1-MM THK)  
43. 121-9870 M [3] SCREW-MACHINE (M6X1X40-MM)  
44. 200-1131 M [7] SCREW-TRUSS HEAD (M4X0.7X20-MM)  
45. 2V-2015 [1] NUT-SPEED  
46. 344-5675 M [3] NUT (M10X1.5-THD)  
47. 3E-8020 M [4] SCREW-TRUSS HEAD (M6X1X25-MM)  
48. 172-8591 M [38] NUT-CLIP (M6X1-THD)  
49. 7X-0579 [32] WASHER-HARD (8.8X25.5X2-MM THK)  
50. 7X-7729 [1] WASHER (11X25X3-MM THK)  
51. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
52. 8T-4186 M [3] BOLT (M10X1.5X40-MM)  
53. 8T-4222 [3] WASHER-PLATED (11X32X2.5-MM THK)  
54. 9V-3940 [1] RETAINER  
55. 9X-2038 [1] WASHER (7X19X2-MM THK)  
56. 9X-2044 M [18] SCREW-TRUSS HEAD (M6X1X16-MM)  
57. 9X-2045 M [59] SCREW-TRUSS HEAD (M6X1X20-MM)  
58. 9X-2046 M [2] SCREW-TRUSS HEAD (M6X1X35-MM)  
59. 148-7361 E FASTENER-HOOK & LOOP (ADHESIVE BACKED)(3-CM)  
60. 148-7362 E FASTENER-HOOK & LOOP (ADHESIVE BACKED)(3-CM)  
61. 219-4361 E TUBING (FLEX)(50-CM)  
61A. 219-4361 E TUBING (FLEX)(44-CM)  
62. 5P-5639 D SEAL (1.2-M)  
63. 284-3953 J SEAL (6.1-DM)  
63A. 284-3953 J SEAL (7.2-DM)  
63B. 284-3953 J SEAL (6.2-DM)  
63C. 284-3953 J SEAL (3.3-DM)  
63D. 284-3953 J SEAL (4.3-DM)  
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  J   ORDER BY THE DECIMETER
  M   METRIC PART
 

#SEBP67180663
 

386-2143: LINES GP-AIR CONDITIONER

386-2143 LINES GP-AIR CONDITIONER
S/N RWB1-UP
PART OF 386-2224 HYDRAULIC AR
Type 1
i05682983 SEBP6718
3862143 LINES GP-AIR CONDITIONER Parts scheme
  For full view, you need register

Parts for your 824K WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 124-3019 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
2. 144-4613 [1] ANGLE AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
3. 321-5692 [1] COUPLING  
4. 321-5694 [1] COUPLING  
5. 327-0282 [4] SEAL-INTEGRAL (1/2-IN)  
6. 327-0283 [2] SEAL-INTEGRAL (3/4-IN)  
7. 387-8806 [1] HOSE AS  
8. 441-3310 I [1] HOSE AS  
9. 441-3311 [1] HOSE AS  
10. 178-3336 M [4] NUT-HEX FLANGE (M8X1.25-THD)  
11. 336-6483 [7] CLIP (LOOP)  
12. 5K-5338 [3] CLIP (LOOP)  
13. 8T-4121 [9] WASHER-HARD (11X21X2.5-MM THK)  
14. 8T-4133 M [1] NUT (M10X1.5-THD)  
15. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
16. 8T-4137 M [3] BOLT (M10X1.5X20-MM)  
17. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
18. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP67180664
 

386-2143: LINES GP-AIR CONDITIONER

386-2143 LINES GP-AIR CONDITIONER
S/N RWB1-UP
PART OF 386-2224 HYDRAULIC AR
Type 2
i07509163 SEBP6718
3862143 LINES GP-AIR CONDITIONER Parts scheme
  For full view, you need register

Parts for your 824K WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 124-3019 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
2. 144-4613 [1] ANGLE AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
3. 321-5692 [1] COUPLING  
4. 321-5694 [1] COUPLING  
5. 327-0282 [4] SEAL-INTEGRAL (1/2-IN)  
6. 327-0283 [2] SEAL-INTEGRAL (3/4-IN)  
7. 512-4303 CI [1] HOSE AS  
8. 441-3310 I [1] HOSE AS  
9. 512-4304 CI [1] HOSE AS  
10. 178-3336 M [4] NUT-HEX FLANGE (M8X1.25-THD)  
11. 336-6483 C [8] CLIP (LOOP)  
12. 5K-5338 [3] CLIP (LOOP)  
13. 8T-4121 C [10] WASHER-HARD (11X21X2.5-MM THK)  
14. 8T-4133 M [1] NUT (M10X1.5-THD)  
15. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
16. 8T-4137 M [3] BOLT (M10X1.5X20-MM)  
17. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
18. 8T-4196 CM [3] BOLT (M10X1.5X35-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP67180665
 

441-3357: LINES GP-HEATER

441-3357 LINES GP-HEATER
S/N RWB1-UP
PART OF 386-2224 HYDRAULIC AR
Type 1
i05646761 SEBP6718
4413357 LINES GP-HEATER Parts scheme
  For full view, you need register

Parts for your 824K WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1V-1122 [2] TAG-IDENTIFICATION (LETTERS SPL)  
2. 1V-1123 [2] TAG-IDENTIFICATION (LETTERS RET)  
3. 250-1448 [2] CONNECTOR  
4. 422-2550 [2] BRACKET AS  
5. 148-8328 [1] CONNECTOR AS  
  3D-2824 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8633 [1] CONNECTOR  
6. 148-8340 [1] CONNECTOR AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8639 [1] CONNECTOR  
7. 239-5030 [1] ADAPTER AS  
  3K-0360 [1] SEAL-O-RING  
  9X-2493 [1] ADAPTER  
8. 341-0104 [1] CONNECTOR AS  
  3D-2824 [1] SEAL-O-RING  
  341-0103 [1] CONNECTOR  
9. 351-0283 [2] VALVE AS-SHUTOFF  
    (EACH INCLUDES)
  6V-7238 [1] VALVE-SHUTOFF  
  238-5080 [1] SEAL-O-RING  
10. 3E-4321 [3] CLIP (LOOP)  
11. 6D-4244 [2] CLIP (LOOP)  
12. 8T-4121 [9] WASHER-HARD (11X21X2.5-MM THK)  
13. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
14. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
15. 8T-4182 M [2] BOLT (M10X1.5X45-MM)  
16. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
17. 9X-2488 [4] CLAMP-HOSE  
18. 5P-0767 E HOSE (242.6-CM)  
18A. 5P-0767 E HOSE (322.4-CM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP67180666
 

441-3357: LINES GP-HEATER

441-3357 LINES GP-HEATER
S/N RWB1-UP
PART OF 386-2224 HYDRAULIC AR
Type 2
i07509159 SEBP6718
4413357 LINES GP-HEATER Parts scheme
  For full view, you need register

Parts for your 824K WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1V-1122 [2] TAG-IDENTIFICATION (LETTERS SPL)  
2. 1V-1123 [2] TAG-IDENTIFICATION (LETTERS RET)  
3. 250-1448 [2] CONNECTOR  
4. 422-2550 [2] BRACKET AS  
5. 148-8328 [1] CONNECTOR AS  
  3D-2824 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8633 [1] CONNECTOR  
6. 148-8340 [1] CONNECTOR AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8639 [1] CONNECTOR  
7. 239-5030 [1] ADAPTER AS  
  3K-0360 [1] SEAL-O-RING  
  9X-2493 [1] ADAPTER  
8. 341-0104 [1] CONNECTOR AS  
  3D-2824 [1] SEAL-O-RING  
  341-0103 [1] CONNECTOR  
9. 351-0283 [2] VALVE AS-SHUTOFF  
    (EACH INCLUDES)
  6V-7238 [1] VALVE-SHUTOFF  
  238-5080 [1] SEAL-O-RING  
10. 3E-4321 C [4] CLIP (LOOP)  
11. 6D-4244 [2] CLIP (LOOP)  
12. 8T-4121 [9] WASHER-HARD (11X21X2.5-MM THK)  
13. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
14. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
15. 8T-4182 M [2] BOLT (M10X1.5X45-MM)  
16. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
17. 9X-2488 [4] CLAMP-HOSE  
18. 5P-0767 CE HOSE (245-CM)  
18A. 5P-0767 CE HOSE (330-CM)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP67180667
 

398-5490: LINES GP-HEATER & AIR COND

398-5490 LINES GP-HEATER & AIR COND
S/N RWB1-128
PART OF 383-2179 CAB AR
i05637915 SEBP6718
3985490 LINES GP-HEATER & AIR COND Parts scheme
  For full view, you need register

Parts for your 824K WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-0441 M [4] BOLT (M10X1.5X45-MM)  
2. 149-6371 [1] SWITCH AS-PRESSURE (A/C COMPRESSOR CLUTCH)(REFRIGERANT, LOW SIDE)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
3. 295-6075 [2] SPACER (10X20X25-MM THK)  
4. 321-5691 [1] COUPLING  
5. 321-5693 [1] COUPLING  
6. 327-0282 [4] SEAL-INTEGRAL (1/2-IN)  
7. 327-0283 [2] SEAL-INTEGRAL (3/4-IN)  
8. 355-1790 [1] CLAMP  
9. 355-1793 [1] DRYER AS-REFRIGERANT  
10. 355-3148 [1] SWITCH AS-PRESSURE (HIGH, LOW)(REFRIGERANT, HIGH SIDE)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
11. 384-5385 [1] HOSE AS  
12. 398-5489 [1] HOSE AS  
13. 399-2341 [1] HOSE AS  
14. 420-2852 [1] BRACKET AS  
15. 099-3649 M [1] BOLT (M8X1.25X40-MM)  
16. 149-7738 [5] CLIP (LOOP)  
17. 159-1503 [4] CLAMP-HOSE  
18. 178-3336 M [2] NUT-HEX FLANGE (M8X1.25-THD)  
19. 209-8296 M [1] BOLT-SOCKET HEAD (M8X1.25X25-MM)  
21. 3E-4321 [4] CLIP (LOOP)  
22. 5C-7261 M [1] NUT (M8X1.25-THD)  
23. 5P-4116 [2] WASHER-HARD (8.8X20.5X2-MM THK)  
24. 8M-2773 [6] CLIP (LOOP)  
25. 8T-4121 [10] WASHER-HARD (11X21X2.5-MM THK)  
26. 8T-4137 M [3] BOLT (M10X1.5X20-MM)  
27. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
28. 9M-7959 [2] CLAMP-HOSE  
29. 9X-7378 [2] SEAL-O-RING  
31. 5P-0767 E HOSE (159-CM EACH)  
32. 206-2723 E GUARD-HOSE (38-CM)  
32A. 206-2723 E GUARD-HOSE (34.5-CM)  
32B. 206-2723 E GUARD-HOSE (39.5-CM)  
33. 8T-4136 M [3] BOLT (M10X1.5X25-MM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP67180668
 

444-0679: LINES GP-HEATER & AIR COND

444-0679 LINES GP-HEATER & AIR COND
S/N RWB1-UP
PART OF 525-6498 CAB AR
i07071015 SEBP6718
4440679 LINES GP-HEATER & AIR COND Parts scheme
  For full view, you need register

Parts for your 824K WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 149-6371 [1] SWITCH AS-PRESSURE (A/C COMPRESSOR CLUTCH)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
2. 133-6934 [2] SPACER (11X20X25-MM THK)  
3. 321-5691 [1] COUPLING  
4. 321-5693 [1] COUPLING  
5. 327-0282 [4] SEAL-INTEGRAL (1/2-IN)  
6. 327-0283 [2] SEAL-INTEGRAL (3/4-IN)  
7. 355-1790 [1] CLAMP  
8. 355-1793 [1] DRYER AS-REFRIGERANT  
9. 355-3148 [1] SWITCH AS-PRESSURE (HIGH, LOW)(AIR CONDITIONER)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
10. 420-2852 [1] BRACKET AS  
11. 449-0203 [1] HOSE AS  
12. 465-7630 Y [1] ACTUATOR & VALVE GP-HTR CONT  
13. 470-0154 [1] BRACKET  
14. 510-6942 [1] HOSE AS  
15. 510-6944 [1] HOSE AS  
16. 130-9984 [1] CLIP (LOOP)  
17. 159-1503 [6] CLAMP-HOSE  
18. 178-3336 M [2] NUT-HEX FLANGE (M8X1.25-THD)  
19. 209-8296 M [1] BOLT-SOCKET HEAD (M8X1.25X25-MM)  
20. 2M-1444 [4] SCREW-TAPPING (8-18X0.3-IN)  
21. 3E-4321 [2] CLIP (LOOP)  
22. 3E-6909 [3] CLIP (LOOP)  
23. 4I-0472 [2] CLIP  
24. 6D-4246 [3] CLIP (LOOP)  
25. 8M-2773 [1] CLIP (LOOP)  
26. 8T-0441 M [4] BOLT (M10X1.5X45-MM)  
27. 8T-4121 [10] WASHER-HARD (11X21X2.5-MM THK)  
28. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
29. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
30. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
31. 9M-7959 [2] CLAMP-HOSE  
32. 9X-7378 [2] SEAL-O-RING  
33. 5P-0767 E HOSE (159-CM)  
33A. 5P-0767 E HOSE (154-CM)  
33B. 5P-0767 E HOSE (19.5-CM)  
34. 178-3620 [1] STRAP-DUAL CLAMP  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP67180669
 

6V-1970: LITERATURE GP

6V-1970 LITERATURE GP
S/N RWB1-UP
PART OF 376-5221 CONFIGURATION AR
i00089695 SEBP6718
  For full view, you need register

Parts for your 824K WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  5P-8500 [2] KEY (LITERATURE COMPARTMENT)  
  5P-7958 [1] SLEEVE-CABLE SPLICE  
 

Information:

Caterpillar Parts SIS Catalog 824K :

INSTALLATION GP-RADIO
310-6000 INSTALLATION GP-RADIO
INSTALLATION GP-CAB
523-5149 INSTALLATION GP-CAB
FILTER GP-CAB AIR
383-2164 FILTER GP-CAB AIR
DUCT & FILTER GP
458-9501 DUCT & FILTER GP
DUCT & FILTER GP
326-2109 DUCT & FILTER GP
DOOR GP-CAB
417-2724 DOOR GP-CAB
DOOR GP-CAB
376-4184 DOOR GP-CAB
DISPLAY GP-MONITOR
459-2220 DISPLAY GP-MONITOR
LINER GP-CAB
371-9549 LINER GP-CAB
LINER GP-CAB
371-9549 LINER GP-CAB
LINES GP-AIR CONDITIONER
386-2143 LINES GP-AIR CONDITIONER
LINES GP-AIR CONDITIONER
386-2143 LINES GP-AIR CONDITIONER
LINES GP-HEATER
441-3357 LINES GP-HEATER
LINES GP-HEATER
441-3357 LINES GP-HEATER
LINES GP-HEATER & AIR COND
398-5490 LINES GP-HEATER & AIR COND
LINES GP-HEATER & AIR COND
444-0679 LINES GP-HEATER & AIR COND

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.