AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

418-4613 PIN GP-BULLDOZER S/N 2341-UP PART OF 418-4614 ARM GP-BULLDOZER, 397-7890 PUSH ARM GP 824K WHEEL DOZER


IMPLEMENTS
BULLDOZER GP
OPERATOR STATION
AIR CONDITIONER GP

WHEEL DOZER 824K WHEEL DOZER 234
 824K Wheel Dozer 23400001-UP (MACHINE) POWERED BY C15 Engine SEBP6724 824K 234   (2014)

IMPLEMENTS

BULLDOZER GP
BULLDOZER AR
397-7884 BULLDOZER AR
BULLDOZER AR
397-7900 BULLDOZER AR
PIN GP-BULLDOZER
418-4613 PIN GP-BULLDOZER
PUSH ARM GP
397-7890 PUSH ARM GP
PUSH ARM GP
418-4580 PUSH ARM GP
PUSH ARM GP
418-4581 PUSH ARM GP
 

#SEBP67240740
 

418-4613: PIN GP-BULLDOZER

418-4613 PIN GP-BULLDOZER
S/N 2341-UP
PART OF 418-4614 ARM GP-BULLDOZER, 397-7890 PUSH ARM GP
i05482489 SEBP6724
4184613 PIN GP-BULLDOZER Parts scheme
  For full view, you need register

Parts for your 824K WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 151-2413 B [4] SPACER (90X150X5-MM THK)  
2. 151-2414 B [14] SPACER (90X150X1.5-MM THK)  
3. 346-1656 [2] PIN AS  
4. 8T-5439 [2] WASHER-HARD (21.5X45X6-MM THK)  
5. 8T-6430 M [2] BOLT (M20X2.5X50-MM)  
6. 9C-7907 [2] SPACER (21.5X28X14-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP67240741
 

397-7890: PUSH ARM GP

397-7890 PUSH ARM GP
S/N 2341-UP
PART OF 397-7884 BULLDOZER AR
i05660130 SEBP6724
3977890 PUSH ARM GP Parts scheme
  For full view, you need register

Parts for your 824K WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1U-0873 [2] PIN  
2. 6J-8570 [2] RETAINER  
3. 372-9999 Y [2] CYLINDER GP-BULLDOZER TILT  
4. 418-4613 Y [1] PIN GP-BULLDOZER  
5. 418-4616 Y [1] STABILIZER GP-BULLDOZER  
6. 418-4617 Y [1] PUSH ARM GP (LH)  
7. 418-4618 Y [1] PUSH ARM GP (RH)  
8. 7X-2561 M [4] BOLT (M20X2.5X35-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP67240742
 

418-4580: PUSH ARM GP

418-4580 PUSH ARM GP -RH
S/N 2341-UP
PART OF 418-4614 ARM GP-BULLDOZER
FOR USE WITH @@@@@418-4579@@@@@, @@@@@418-4581@@@@@
i05660114 SEBP6724
4184580 PUSH ARM GP Parts scheme
  For full view, you need register

Parts for your 824K WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6F-7523 [1] CAP AS-BEARING  
2. 9W-7602 B [26] SHIM (0.8-MM THK)  
3. [1] PUSH ARM AS (RH)  
  1J-6740 [1] BEARING AS  
  [1] BRACKET AS  
  8E-6755 [2] BUSHING  
4. 190-8494 M [2] BOLT (M30X3.5X200-MM)  
5. 8C-8722 M [2] NUT (M30X3.5-THD)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP67240743
 

418-4581: PUSH ARM GP

418-4581 PUSH ARM GP
S/N 2341-UP
PART OF 418-4614 ARM GP-BULLDOZER
i05660108 SEBP6724
4184581 PUSH ARM GP Parts scheme
  For full view, you need register

Parts for your 824K WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6F-7523 [1] CAP AS-BEARING  
2. 9W-7602 B [26] SHIM (0.8-MM THK)  
3. [1] PUSH ARM AS  
  1J-6740 [1] BEARING AS  
  [1] BRACKET AS  
  8E-6755 [2] BUSHING  
4. 190-8494 M [2] BOLT (M30X3.5X200-MM)  
5. 8C-8722 M [2] NUT (M30X3.5-THD)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP67240744
 

418-4617: PUSH ARM GP

418-4617 PUSH ARM GP -LH
S/N 2341-UP
PART OF 397-7890 PUSH ARM GP
i05660083 SEBP6724
4184617 PUSH ARM GP Parts scheme
  For full view, you need register

Parts for your 824K WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6F-7523 [1] CAP AS-BEARING  
2. 9W-7602 B [26] SHIM (0.8-MM THK)  
3. 418-4633 [1] PUSH ARM AS (LH)  
  1J-6740 [1] BEARING AS  
  8P-9770 [1] PLATE  
  113-0006 [1] BRACKET (LH)  
4. 190-8494 M [2] BOLT (M30X3.5X200-MM)  
5. 8C-8722 M [2] NUT (M30X3.5-THD)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP67240745
 

418-4618: PUSH ARM GP

418-4618 PUSH ARM GP -RH
S/N 2341-UP
PART OF 397-7890 PUSH ARM GP
i05660078 SEBP6724
4184618 PUSH ARM GP Parts scheme
  For full view, you need register

Parts for your 824K WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6F-7523 [1] CAP AS-BEARING  
2. 9W-7602 B [26] SHIM (0.8-MM THK)  
3. 418-4634 [1] PUSH ARM AS (RH)  
  1J-6740 [1] BEARING AS  
  8P-9770 [1] PLATE  
  113-0005 [1] BRACKET  
4. 190-8494 M [2] BOLT (M30X3.5X200-MM)  
5. 8C-8722 M [2] NUT (M30X3.5-THD)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP67240746
 

418-4616: STABILIZER GP-BULLDOZER

418-4616 STABILIZER GP-BULLDOZER
S/N 2341-UP
PART OF 418-4614 ARM GP-BULLDOZER, 397-7890 PUSH ARM GP
i05660088 SEBP6724
4184616 STABILIZER GP-BULLDOZER Parts scheme
  For full view, you need register

Parts for your 824K WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
2. 4T-0589 [1] SLIDER  
3. 6J-3999 [1] CONNECTOR  
4. 9J-1555 [2] BUSHING  
5. 9J-1557 [1] RETAINER AS  
6. 116-6164 [1] COVER AS  
7. 131-3445 B [4] SPACER  
8. 418-4625 [1] STABILIZER AS  
9. 141-1221 [1] PIN  
10. 6V-7687 M [1] LOCKNUT (M12X1.75-THD)  
11. 8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
12. 8T-4648 M [1] BOLT (M12X1.75X70-MM)  
13. 8T-4956 M [8] BOLT (M12X1.75X35-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP67240747
 

397-7889: TRUNNION GP-BULLDOZER

397-7889 TRUNNION GP-BULLDOZER
S/N 2341-UP
PART OF 397-7884, 397-7900 BULLDOZER AR
i05660131 SEBP6724
3977889 TRUNNION GP-BULLDOZER Parts scheme
  For full view, you need register

Parts for your 824K WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-6806 M [16] BOLT (M24X3X380-MM)  
2. 5M-6214 [2] PLUG (1/8-27 PTF)  
3. 418-4621 [1] SUPPORT AS  
  1U-2533 [2] BAR  
4. 198-4771 [32] WASHER-HARD (26X47X12-MM THK)  
5. 8T-4001 M [16] NUT (M24X3-THD)  
  M   METRIC PART
 

#SEBP67240748
 

465-7630: ACTUATOR & VALVE GP-HTR CONT

465-7630 ACTUATOR & VALVE GP-HTR CONT -WATER
S/N 2341-UP
PART OF 444-0679 LINES GP-HEATER & AIR COND
i06556342 SEBP6724
4657630 ACTUATOR & VALVE GP-HTR CONT Parts scheme
  For full view, you need register

Parts for your 824K WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 279-0850 [1] ACTUATOR (ELECTRONIC)  
2. 450-4968 [3] SCREW-HEX HEAD (8-16X0.5-IN)  
3. 465-7609 [3] SCREW-WASHER HEAD (8-16X2.3-IN)  
4. 465-7611 [1] VALVE AS (WATER)  
5. 311-3520 [3] SCREW-HEX HEAD (8-16X0.5-IN)  
 

#SEBP67240749
 

319-7030: AIR CONDITIONER & MOUNTING GP

319-7030 AIR CONDITIONER & MOUNTING GP
S/N 2341-4009
PART OF 319-7029 CONDENSER GP-REFRIGERANT
i05298240 SEBP6724
3197030 AIR CONDITIONER & MOUNTING GP Parts scheme
  For full view, you need register

Parts for your 824K WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 420-5329 [1] GASKET  
2. 437-7412 Y [1] AIR CONDITIONER GP  
3. 8T-4138 M [12] BOLT (M6X1X20-MM)  
4. 9X-2038 [12] WASHER (7X19X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Cutting Edges and End Bits - Inspect/Replace
824K Wheel Dozer
Bulldozer Stabilizer - Lubricate
824K Wheel Dozer
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BOLTS THAT RETAIN THE DOZER GROUP PINS ON CERTAIN 824K WHEEL DOZERS AND 826K LANDFILL COMPACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BOLTS THAT RETAIN THE DOZER GROUP PINS ON CERTAIN 824K WHEEL DOZERS AND 826K LANDFILL COMPACTORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Bulldozer Trunnion
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems
Push Arm
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems
Push Arm
824K Wheel Dozer, 825K Soil Compactor and 826K Landfill Compactor Machine Systems
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BOLTS THAT RETAIN THE DOZER GROUP PINS ON CERTAIN 824K WHEEL DOZERS AND 826K LANDFILL COMPACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BOLTS THAT RETAIN THE DOZER GROUP PINS ON CERTAIN 824K WHEEL DOZERS AND 826K LANDFILL COMPACTORS
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Bulldozer Trunnion - Remove
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Machine Systems
Bulldozer Trunnion - Install
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Machine Systems
Stabilizer Link - Remove and Install
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Machine Systems
Bulldozer Stabilizer - Remove and Install
826K Landfill Compactor, 825K Soil Compactor and 824K Wheel Dozer Machine Systems
Service Magazine
New Blade Mounting Pin Retaining Hardware Is Used On Certain 826K Landfill Compactors and 824K Wheel Dozers {5104, 6061, 6065, 6066}
New Blade Mounting Pin Retaining Hardware Is Used On Certain 826K Landfill Compactors and 824K Wheel Dozers {5104, 6061, 6065, 6066}

Caterpillar Parts SIS Catalog 824K :

BULLDOZER AR
397-7900 BULLDOZER AR
BULLDOZER AR
397-7884 BULLDOZER AR
ARM GP-BULLDOZER
418-4614 ARM GP-BULLDOZER
VALVE GP-STEERING NEUTRALIZER
296-5662 VALVE GP-STEERING NEUTRALIZER
VALVE GP-STEERING
127-5500 VALVE GP-STEERING
VALVE GP-SHUTTLE
4T-1860 VALVE GP-SHUTTLE
VALVE GP-RELIEF
9T-9194 VALVE GP-RELIEF
VALVE GP-RELIEF
9T-7418 VALVE GP-RELIEF
PUSH ARM GP
397-7890 PUSH ARM GP
PUSH ARM GP
418-4580 PUSH ARM GP
PUSH ARM GP
418-4581 PUSH ARM GP
PUSH ARM GP
418-4617 PUSH ARM GP
PUSH ARM GP
418-4618 PUSH ARM GP
STABILIZER GP-BULLDOZER
418-4616 STABILIZER GP-BULLDOZER
TRUNNION GP-BULLDOZER
397-7889 TRUNNION GP-BULLDOZER
ACTUATOR & VALVE GP-HTR CONT
465-7630 ACTUATOR & VALVE GP-HTR CONT

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.