388-6251 CONTROL AR-FAN S/N F9A1-400 982M WHEEL LOADER

Part No	Qty	Parts name
364-9883 Y	[1]	FAN GP-SUCTION
365-0317 Y	[1]	LINES GP-AIR
394-7140 Y	[1]	LINES GP-AIR
374-0776 Y	[1]	WIRING GP-FAN
389-6072	[1]	BOSS GP-REAR FRAME
388-5576 M	[2]	BOSS-WELD (M10X1.5X30-MM)
446-5834 M	[1]	STUD-WELD (M10X1.5X41-MM)
225-4130	[2]	FILM-WARNING (FLYING DEBRIS, STAY BACK, U.S.)
225-4131	[2]	FILM-WARNING (FLYING DEBRIS, STAY BACK, INTL)
M		METRIC PART
Y		SEPARATE ILLUSTRATION

#SEBP67521012

435-3679: CONTROL AR-FAN

CONTROL AR-FAN

435-3679 CONTROL AR-FAN
S/N F9A1-UP
CUSTOM
Type 1

i05735850 SEBP6752

For full view, you need register

Parts for your 982M WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4H-6112	[1]	BREATHER (SOLENOID VALVE)
2.	148-8368	[1]	ELBOW AS
	3J-1907	[1]	SEAL-O-RING
	4J-5477	[1]	SEAL-O-RING
	6V-8627	[1]	ELBOW
3.	188-2461 Y	[1]	VALVE GP-SOLENOID (VARIABLE PITCH FAN)
4.	192-5017	[2]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
5.	200-6345	[1]	SADDLE-MOUNTING (DUAL SWIVEL)
6.	307-7312 J	[1]	FAN AS (12-BLADE)
7.	308-1190	[1]	ADAPTER
8.	324-8127	[1]	HOSE
9.	337-9891	[1]	HOSE
10.	338-3647	[1]	TUBE AS
11.	350-7075 Y	[1]	MOTOR GP-PISTON (FAN)
12.	364-9793	[1]	BAFFLE AS
	7T-1099	[2]	LINK
13.	374-0775	[1]	HARNESS AS-WIRING (FAN)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	9X-1813 E		SLEEVE (36-CM)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)
	9X-3402	[4]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[4]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	9X-3401	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	1P-0810 B		TAPE-ELECTRICAL
14.	377-9564	[3]	ELBOW AS
			(EACH INCLUDES)
	4J-5477	[1]	SEAL-O-RING
	377-9563	[1]	ADAPTER-ELBOW
15.	377-9581	[1]	ELBOW AS
	4J-5477	[1]	SEAL-O-RING
	377-9577	[1]	ADAPTER-ELBOW
16.	377-9582	[1]	ADAPTER-ELBOW
17.	395-1173 Y	[1]	PUMP & LINES GP-HYDRAULIC FAN
18.	395-1175 I	[1]	HOSE AS
19.	417-7885	[1]	BRACKET AS
20.	420-7625	[1]	SUPPORT AS-MOTOR
21.	441-3685 I	[1]	HOSE AS
22.	441-3729	[1]	HOSE AS
23.	110-2023 M	[1]	STUD-WELD (M10X1.5X25-MM)
24.	124-0174	[3]	CLIP (LOOP)(LOOP)
25.	130-5300	[2]	CLIP
26.	132-5789	[1]	CLIP (LADDER)(LADDER)
27.	133-6934	[1]	SPACER (11X20X25-MM THK)
28.	170-5632 M	[2]	BOLT (M4X0.7X16-MM)
29.	177-2215	[1]	STRAP-DUAL CLAMP
30.	1P-4278	[2]	CLAMP-HOSE
31.	204-2281	[2]	STRAP-CABLE
32.	211-8071	[2]	CAP-PROTECTIVE
33.	342-9511	[1]	CLAMP-BAND
34.	344-5675 M	[2]	NUT (M10X1.5-THD)
35.	346-4792	[3]	CLAMP-BAND
36.	388-5576 M	[2]	BOSS-WELD (M10X1.5X30-MM)
37.	3V-4791	[1]	GROMMET
38.	4D-9517	[3]	CLIP
39.	5F-9757	[2]	GROMMET
40.	5P-1076	[8]	WASHER-HARD (13.5X30X4-MM THK)
41.	6D-4246	[1]	CLIP (LOOP)(LOOP)
42.	7K-1181	[6]	STRAP-CABLE
43.	7X-0515	[1]	WASHER-HARD (17X35X5-MM THK)
44.	7X-0579	[3]	WASHER-HARD (8.8X25.5X2-MM THK)
45.	7X-7729	[21]	WASHER (11X25X3-MM THK)
46.	8T-3016	[2]	WASHER (5.3X10X1-MM THK)
47.	8T-4121	[8]	WASHER-HARD (11X21X2.5-MM THK)
48.	8T-4132 M	[1]	NUT (M16X2-THD)
49.	8T-4136 M	[10]	BOLT (M10X1.5X25-MM)
50.	8T-4137 M	[2]	BOLT (M10X1.5X20-MM)
51.	8T-4185 M	[1]	BOLT (M10X1.5X50-MM)
52.	8T-4196 M	[6]	BOLT (M10X1.5X35-MM)
53.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
54.	8T-4224	[9]	WASHER-HARD (8.8X16X2-MM THK)
55.	8T-4908 M	[9]	BOLT (M8X1.25X25-MM)
56.	8T-4956 M	[10]	BOLT (M12X1.75X35-MM)
57.	8T-6466 M	[8]	BOLT (M10X1.5X60-MM)
58.	8T-6912 M	[3]	BOLT (M8X1.25X50-MM)
59.	296-8592 E		SEAL (138-CM)
60.	312-6458 E		TAPE-REFLECTIVE (12-CM)

	225-4130 F	[2]	FILM-WARNING (FLYING DEBRIS, STAY BACK, U.S.)
	225-4131 F	[2]	FILM-WARNING (FLYING DEBRIS, STAY BACK, INTL)

			AVAILABLE REPAIR KIT(S):
	324-7872 J	[1]	KIT-BLADE
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	F		NOT SHOWN
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP67521013

435-3679: CONTROL AR-FAN

CONTROL AR-FAN

435-3679 CONTROL AR-FAN
S/N F9A1-UP
CUSTOM
Type 2

i07255580 SEBP6752

For full view, you need register

Parts for your 982M WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4H-6112	[1]	BREATHER (SOLENOID VALVE)
2.	7K-1181 C	[15]	STRAP-CABLE
3.	148-8368	[1]	ELBOW AS
	3J-1907	[1]	SEAL-O-RING
	4J-5477	[1]	SEAL-O-RING
	6V-8627	[1]	ELBOW
4.	188-2461 Y	[1]	VALVE GP-SOLENOID (VARIABLE PITCH FAN)
5.	192-5017 C	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
6.	248-2841 C	[1]	RELAY AS (24-VOLT)
7.	307-7312 J	[1]	FAN AS (12-BLADE)
8.	308-1190	[1]	ADAPTER
9.	324-8127	[1]	HOSE
10.	337-9891	[1]	HOSE
11.	338-3647	[1]	TUBE AS
12.	364-9793	[1]	BAFFLE AS
	7T-1099	[2]	LINK
13.	374-0775	[1]	HARNESS AS-WIRING (FAN)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	9X-1813 E		SLEEVE (36-CM)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)
	9X-3402	[4]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[4]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	9X-3401	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	1P-0810 B		TAPE-ELECTRICAL
14.	377-9564	[3]	ELBOW AS
			(EACH INCLUDES)
	4J-5477	[1]	SEAL-O-RING
	377-9563	[1]	ADAPTER-ELBOW
15.	377-9581	[1]	ELBOW AS
	4J-5477	[1]	SEAL-O-RING
	377-9577	[1]	ADAPTER-ELBOW
16.	377-9582	[1]	ADAPTER-ELBOW
17.	395-1173 Y	[1]	PUMP & LINES GP-HYDRAULIC FAN
18.	395-1175 I	[1]	HOSE AS
19.	417-7885	[1]	BRACKET AS
20.	420-7625	[1]	SUPPORT AS-MOTOR
21.	432-0095 C	[2]	COVER AS
22.	441-3685 I	[1]	HOSE AS
23.	441-3729	[1]	HOSE AS
24.	442-6377 C	[2]	FILM-WARNING (FLYING DEBRIS, READ OMM)
25.	442-6378 C	[2]	FILM-WARNING (FLYING DEBRIS, READ OMM)
26.	469-9242 C	[1]	TUBE AS
27.	489-3363 CY	[1]	HARNESS AS-WIRING
28.	124-0174	[3]	CLIP (LOOP)(LOOP)
29.	130-5300 C	[3]	CLIP
30.	132-5789 C	[4]	CLIP (LADDER)
31.	133-6934	[1]	SPACER (11X20X25-MM THK)
32.	170-5632 M	[2]	BOLT (M4X0.7X16-MM)
33.	177-2215 C	[2]	STRAP-DUAL CLAMP
34.	1P-4278	[2]	CLAMP-HOSE
35.	200-6345 C	[2]	SADDLE-MOUNTING (DUAL SWIVEL)
36.	204-2281 C	[4]	STRAP-CABLE
37.	211-8071	[2]	CAP-PROTECTIVE
38.	211-8073 C	[4]	CAP-PROTECTION
39.	342-9511	[1]	CLAMP-BAND
40.	344-5675 CM	[1]	NUT (M10X1.5-THD)
41.	346-4792	[3]	CLAMP-BAND
42.	388-5576 M	[2]	BOSS-WELD (M10X1.5X30-MM)
43.	3V-4791	[1]	GROMMET
44.	4D-9517 C	[2]	CLIP
45.	5F-9757	[2]	GROMMET
46.	5P-1076	[8]	WASHER-HARD (13.5X30X4-MM THK)
47.	5P-4116 C	[3]	WASHER-HARD (8.8X20.5X2-MM THK)
48.	6D-4246	[1]	CLIP (LOOP)
49.	7X-0515	[1]	WASHER-HARD (17X35X5-MM THK)
50.	7X-0579	[3]	WASHER-HARD (8.8X25.5X2-MM THK)
51.	7X-7729 C	[25]	WASHER (11X25X3-MM THK)
52.	8T-3016	[2]	WASHER (5.3X10X1-MM THK)
53.	8T-4121 C	[6]	WASHER-HARD (11X21X2.5-MM THK)
54.	8T-4132 M	[1]	NUT (M16X2-THD)
55.	8T-4136 CM	[9]	BOLT (M10X1.5X25-MM)
56.	8T-4137 M	[2]	BOLT (M10X1.5X20-MM)
57.	8T-4185 M	[1]	BOLT (M10X1.5X50-MM)
58.	8T-4195 CM	[4]	BOLT (M10X1.5X30-MM)
59.	8T-4196 M	[6]	BOLT (M10X1.5X35-MM)
60.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
61.	8T-4224	[9]	WASHER-HARD (8.8X16X2-MM THK)
62.	8T-4908 CM	[3]	BOLT (M8X1.25X25-MM)
63.	8T-4956 M	[10]	BOLT (M12X1.75X35-MM)
64.	8T-5093 CM	[9]	BOLT-LOCKING (M8X1.25X25-MM)
65.	8T-6466 M	[8]	BOLT (M10X1.5X60-MM)
66.	8T-6912 CM	[3]	BOLT (M8X1.25X50-MM)
67.	296-8592 E		SEAL (138-CM)
68.	312-6458 E		TAPE-REFLECTIVE (12-CM)

			AVAILABLE REPAIR KIT(S):
	324-7872 J	[1]	KIT-BLADE
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP67521014

493-7703: CONTROL AR-FAN

CONTROL AR-FAN

493-7703 CONTROL AR-FAN
S/N F9A401-UP
VARIABLE PITCH FAN

i06682644 SEBP6752

For full view, you need register

Parts for your 982M WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
389-6072 Y	[1]	BOSS GP-REAR FRAME
477-9914 Y	[1]	FAN GP-SUCTION
472-8730 Y	[1]	FILM GP
365-0317 Y	[1]	LINES GP-AIR
493-6919 Y	[1]	LINES GP-AIR (VARIABLE PITCH FAN)
346-1067 Y	[1]	RELAY GP (VARIABLE PITCH FAN)
489-3362 Y	[1]	WIRING GP-FAN
Y		SEPARATE ILLUSTRATION

#SEBP67521015

497-3534: CONTROL AR-FAN

CONTROL AR-FAN

497-3534 CONTROL AR-FAN
S/N F9A401-UP
PART OF 502-7139, 502-7140, 511-6977, 511-6978, 526-2299, 526-2300 DISTRIBUTION AR

i06814276 SEBP6752

For full view, you need register

Parts for your 982M WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
477-9913 Y	[1]	FAN GP-SUCTION
324-8109 Y	[1]	LINES GP-AIR
Y		SEPARATE ILLUSTRATION

#SEBP67521016

335-3449: COOLER GP-HYDRAULIC OIL

COOLER GP-HYDRAULIC OIL

335-3449 COOLER GP-HYDRAULIC OIL
S/N F9A1-UP
PART OF 392-3668 COOLER GP-AXLE OIL, 435-3713 KIT-AXLE OIL COOLER

i05749846 SEBP6752

3353449 COOLER GP-HYDRAULIC OIL Parts scheme

For full view, you need register

Parts for your 982M WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	335-3453	[1]	CORE AS-OIL COOLER
2.	335-3454	[1]	BODY-VALVE
3.	360-5604	[1]	VALVE AS-CONTROL (HYDRAULIC OIL TEMP)
3A.	238-5085	[1]	SEAL-O-RING
4.	5P-8066	[4]	SEAL-O-RING
5.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
6.	8T-4196 M	[4]	BOLT (M10X1.5X35-MM)
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP67521017

359-6695: CYLINDER GP-LIFT

CYLINDER GP-LIFT

359-6695 CYLINDER GP-LIFT
S/N F9A1-UP
190-MM (7.5-IN) BORE X 805-MM (31.7-IN) STROKE
PART OF 371-9388, 498-5648 LINKAGE AR-FRONT

i05507529 SEBP6752

For full view, you need register

Parts for your 982M WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7Y-4695 M	[1]	LOCKNUT (M80X2-THD)
2.	114-0757	[1]	BUSHING
3.	125-1286	[1]	SEAL AS
4.	165-9289	[1]	SEAL-LIP TYPE
5.	204-2845	[2]	RING
6.	204-2846	[1]	RING
7.	216-0005	[1]	SEAL-U-CUP
8.	369-3461	[1]	PISTON
9.	369-3462	[1]	HEAD
10.	369-3465	[1]	ROD AS
11.	433-2439	[1]	CYLINDER AS-LIFT
11A.	1V-8241	[1]	BUSHING
12.	093-1572	[1]	RING-RETAINING
13.	095-1730	[1]	SEAL-O-RING
14.	096-2665	[1]	RING-BACKUP
15.	126-1978	[1]	RING-BACKUP
16.	170-9847	[1]	SEAL-BUFFER
17.	7Y-5215 M	[11]	BOLT-SOCKET HEAD (M24X3X90-MM)
	M		METRIC PART

#SEBP67521018

382-7981: CYLINDER GP-TILT

CYLINDER GP-TILT

382-7981 CYLINDER GP-TILT
S/N F9A1-UP
130-MM (5.12-IN) BORE X 742-MM (29.21-IN) STROKE
PART OF 371-9388, 498-5648 LINKAGE AR-FRONT

i05756118 SEBP6752

For full view, you need register

Parts for your 982M WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7Y-4622	[1]	LOCKNUT (SPECIAL)
2.	7Y-4631	[1]	RING-RETAINING
3.	128-9260	[1]	BUSHING
4.	170-9846 J	[1]	SEAL-BUFFER
5.	382-7983	[1]	HEAD
6.	382-7984	[1]	PISTON
7.	382-7985	[1]	CYLINDER AS-TILT
7A.	1V-8242		BUSHING
8.	382-7994	[1]	ROD AS
8A.	1V-8242		BUSHING
9.	095-1631 J	[1]	SEAL-O-RING
10.	150-5884 J	[1]	RING
11.	165-9288 J	[1]	SEAL-LIP TYPE
12.	179-9771 J	[2]	RING
13.	216-0004 J	[1]	SEAL-U-CUP
14.	7Y-4628 J	[1]	RING (BACKUP)
15.	7Y-4633 J	[1]	RING-BACKUP
16.	7Y-5215 M	[8]	BOLT-SOCKET HEAD (M24X3X90-MM)
17.	9X-3595 J	[1]	SEAL AS

			AVAILABLE REPAIR KIT(S):
	471-0336 J	[1]	KIT-HYDRAULIC CYLINDER SEAL
	J		KIT MARKED J INCLUDES PART(S) MARKED J
	M		METRIC PART

#SEBP67521019

376-1286: FILTER GP-OIL

FILTER GP-OIL

376-1286 FILTER GP-OIL -HYDRAULIC TANK RETURN
S/N F9A1-UP
PART OF 380-9940, 447-8210 TANK & FILTER GP-HYDRAULIC

i05230715 SEBP6752

For full view, you need register

Parts for your 982M WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	376-1288	[1]	FILTER ELEMENT-OIL
2.	378-1147	[1]	COVER
3.	442-2479	[1]	VALVE-BYPASS
4.	378-1149	[1]	HOUSING AS-OIL FILTER
5.	378-1150	[1]	FLANGE
6.	378-1491	[1]	GASKET
7.	5K-1787	[1]	SEAL-O-RING
8.	101-7404 M	[3]	BOLT-SOCKET HEAD (M10X1.5X30-MM)
	M		METRIC PART