498-5643 LINKAGE AR-FRONT S/N N8T1101-UP PART OF 511-6975, 511-6976, 526-2297, 526-2298 DISTRIBUTION AR FOR USE WITH @@@@@373-3942@@@@@, @@@@@373-3941@@@@@, @@@@@506-0416@@@@@, @@@@@495-7529@@@@@, @@@@@507-8991@@@@@ CANNOT BE USED WITH @@@@@367-2349@@@@@, @@@@@398-9081@@@@@ 980M

498-5643 LINKAGE AR-FRONT
S/N N8T1101-UP
PART OF 511-6975, 511-6976, 526-2297, 526-2298 DISTRIBUTION AR
FOR USE WITH @@@@@373-3942@@@@@, @@@@@373-3941@@@@@, @@@@@506-0416@@@@@, @@@@@495-7529@@@@@, @@@@@507-8991@@@@@
CANNOT BE USED WITH @@@@@367-2349@@@@@, @@@@@398-9081@@@@@

i06811221 SEBP6753

For full view, you need register

Parts for your 980M WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
491-2110 Y	[1]	ARM GP-LIFT
382-6076 Y	[2]	CYLINDER GP-LIFT
382-7982 Y	[2]	CYLINDER GP-TILT
494-6653 Y	[1]	LINES GP-GREASE
494-6654 Y	[1]	LINES GP-GREASE
364-7735 Y	[1]	LINES GP-LIFT CYLINDER
364-7760 Y	[1]	LINES GP-TILT CYLINDER
364-1648 Y	[1]	SENSOR & MTG GP-POSITION (LIFT)
303-2237 Y	[1]	SENSOR & MTG GP-POSITION (TILT)
364-7860 Y	[1]	VALVE GP-MANUAL
489-3378 Y	[1]	WIRING GP-SENSOR (TILT)
Y		SEPARATE ILLUSTRATION

#SEBP67531321

498-5644: LINKAGE AR-FRONT

LINKAGE AR-FRONT

498-5644 LINKAGE AR-FRONT -HIGH LIFT
S/N N8T1101-UP
FOR USE WITH @@@@@373-3946@@@@@, @@@@@373-3941@@@@@, @@@@@495-7531@@@@@, @@@@@506-0416@@@@@, @@@@@507-8991@@@@@
CANNOT BE USED WITH @@@@@367-2349@@@@@, @@@@@398-9081@@@@@

i06811225 SEBP6753

For full view, you need register

Parts for your 980M WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
491-2113 Y	[1]	ARM & BEARING AS-LIFT
382-6076 Y	[2]	CYLINDER GP-LIFT (HIGH LIFT)
387-0059 Y	[2]	CYLINDER GP-LIFT (HIGH LIFT, TILT)
510-7227 Y	[1]	HARDWARE GP-LOADER FRAME
494-6653 Y	[1]	LINES GP-GREASE (CENTRAL)
494-6654 Y	[1]	LINES GP-GREASE (FRONT)
364-7735 Y	[1]	LINES GP-LIFT CYLINDER
364-7760 Y	[1]	LINES GP-TILT CYLINDER
364-1648 Y	[1]	SENSOR & MTG GP-POSITION (LIFT)
374-7134 Y	[1]	SENSOR & MTG GP-POSITION (TILT)
364-7860 Y	[1]	VALVE GP-MANUAL
489-3378 Y	[1]	WIRING GP-SENSOR (TILT)
Y		SEPARATE ILLUSTRATION

#SEBP67531322

498-5645: LINKAGE AR-FRONT

LINKAGE AR-FRONT

498-5645 LINKAGE AR-FRONT
S/N N8T1101-UP
FOR USE WITH @@@@@506-7665@@@@@, @@@@@507-6191@@@@@, @@@@@498-5641@@@@@

i06811020 SEBP6753

For full view, you need register

Parts for your 980M WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
491-2110 Y	[1]	ARM GP-LIFT
382-6076 Y	[2]	CYLINDER GP-LIFT
351-9361 Y	[2]	CYLINDER GP-TILT
494-6653 Y	[1]	LINES GP-GREASE
494-6654 Y	[1]	LINES GP-GREASE
364-7735 Y	[1]	LINES GP-LIFT CYLINDER
433-4095 Y	[1]	LINES GP-TILT CYLINDER
364-1648 Y	[1]	SENSOR & MTG GP-POSITION (LIFT)
303-2237 Y	[1]	SENSOR & MTG GP-POSITION (TILT)
364-7860 Y	[1]	VALVE GP-MANUAL
489-3378 Y	[1]	WIRING GP-SENSOR (TILT)
Y		SEPARATE ILLUSTRATION

#SEBP67531323

434-2901: LOGGING AR

LOGGING AR

434-2901 LOGGING AR
S/N N8T1-UP
FOR USE WITH @@@@@377-6108@@@@@, @@@@@365-0008@@@@@, @@@@@415-7927@@@@@

i06305260 SEBP6753

For full view, you need register

Parts for your 980M WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
384-7029 Y	[1]	CHASSIS AR
386-1720 Y	[1]	FRAME AS-REAR
		S/N N8T1-463
472-0239 Y	[1]	FRAME AS-REAR (ENGINE END)
		S/N N8T464-UP
384-7028 Y	[1]	CONFIGURATION AR
466-5277 Y	[1]	HITCH GP-ARTICULATING
		S/N N8T464-UP
348-3432	[1]	FILTER GP-CAB AIR
		-OR-
290-2287	[1]	FILTER ELEMENT-CAB AIR (STANDARD FILTRATION)
316-7221	[1]	GRILL
Y		SEPARATE ILLUSTRATION

#SEBP67531324

361-5017: ADJUSTER GP-CONTROL

ADJUSTER GP-CONTROL

361-5017 ADJUSTER GP-CONTROL
S/N N8T1-UP
PART OF 495-0889 ARMREST GP, 361-5015 SUPPORT GP-HYDRAULIC CONTROL

i04135935 SEBP6753

3615017 ADJUSTER GP-CONTROL Parts scheme

For full view, you need register

Parts for your 980M WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6F-9974	[2]	PLUG-CORE
2.	161-2398	[2]	SEAL-LIP TYPE
3.	244-2095	[1]	ROD
4.	244-2109	[1]	ROD-ADJUSTMENT
5.	244-2115	[1]	PIN
6.	267-9552	[2]	SPACER (19X76X.8-MM THK)
7.	267-9553	[1]	SPACER (7X12.5X6.5-MM THK)
8.	267-9554	[2]	BEARING
9.	267-9555	[2]	BEARING
10.	267-9556	[2]	BEARING
11.	267-9834	[1]	PLATE
12.	280-3512	[1]	HOUSING
13.	280-3514	[1]	SUPPORT-ARM
14.	282-2033	[1]	BUTTON-PUSH
15.	282-6695	[1]	BRACKET
16.	289-2073	[1]	FILM-INFORMATION (ARMREST ADJUSTMENT)
17.	266-3214	[1]	PIN
18.	3E-4353	[2]	WASHER-HARD (11X25X3-MM THK)
19.	7D-7453	[1]	SETSCREW (1/4-20-THD)
20.	7D-9708	[1]	BOLT-SPECIAL
21.	9X-2040 M	[2]	SCREW-TRUSS HEAD (M10X1.5X25-MM)
22.	9X-2043 M	[1]	SCREW-TRUSS HEAD (M6X1X14-MM)
	M		METRIC PART

#SEBP67531325

366-2734: AIR CONDITIONER & MOUNTING GP

AIR CONDITIONER & MOUNTING GP

366-2734 AIR CONDITIONER & MOUNTING GP
S/N N8T1-1100
PART OF 371-7006 CAB AR

i05501827 SEBP6753

3662734 AIR CONDITIONER & MOUNTING GP Parts scheme

For full view, you need register

Parts for your 980M WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[1]	STRAP-CABLE
2.	5P-3928	[1]	COUPLING AS-REFRIGERANT (SELF-SEALING)(LH)
3.	7K-3176	[1]	COUPLING AS-REFRIGERANT (SELF-SEALING)(RH)
4.	7K-3304	[1]	NUT-JAM (1-20-THD)
5.	290-2288	[1]	FILTER-AIR (CONDITIONER)
6.	291-9146	[1]	PLATE
7.	291-9147	[1]	PLATE
8.	293-6151	[1]	TUBE
9.	302-8727	[1]	SEAL
10.	327-0282	[3]	SEAL-INTEGRAL (1/2-IN)
11.	327-0283	[1]	SEAL-INTEGRAL (3/4-IN)
12.	437-3833	[1]	TUBE AS
13.	355-1790	[1]	CLAMP
14.	355-1793	[1]	DRYER AS-REFRIGERANT
15.	369-7653	[1]	HOSE AS
16.	369-7654	[1]	HOSE AS
17.	369-7655 I	[1]	HOSE AS
18.	369-7659	[1]	BRACKET AS
	6V-9632 M	[12]	NUT-WELD (M6X1-THD)
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
20.	437-7412 Y	[1]	AIR CONDITIONER GP
21.	091-0081	[1]	SPACER (10.5X20X10-MM THK)
22.	096-4034 M	[4]	BOLT-WING (M6X1X15-MM)
23.	159-1503	[4]	CLAMP-HOSE
24.	178-3336 M	[2]	NUT-HEX FLANGE (M8X1.25-THD)
25.	183-7121 M	[1]	BOLT (M10X1.5X35-MM)
26.	8T-4138 M	[10]	BOLT (M6X1X20-MM)
27.	209-8296 M	[1]	BOLT-SOCKET HEAD (M8X1.25X25-MM)
28.	275-6710	[4]	RETAINER (PUSH ON)
29.	5C-2890 M	[2]	NUT (M6X1-THD)
30.	5P-4106	[1]	NUT (1-7/16-16-THD)
31.	7X-7729	[1]	WASHER (11X25X3-MM THK)
32.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
33.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
34.	9M-7959	[2]	CLAMP-HOSE
35.	9M-8406	[4]	CLIP (LOOP)
36.	9X-6165	[12]	WASHER (6.5X22X2.5-MM THK)
37.	9X-7383	[1]	SEAL-O-RING
38.	9X-7384	[1]	SEAL-O-RING
39.	5P-0767 E		HOSE (21-CM EACH)
	E		ORDER BY THE CENTIMETER
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP67531326

415-1735: AIR CONDITIONER GP

AIR CONDITIONER GP

415-1735 AIR CONDITIONER GP
S/N N8T1101-UP
PART OF 445-8660 AIR CONDITIONER GP
Type 1

i06787177 SEBP6753

For full view, you need register

Parts for your 980M WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9X-4994	[2]	CONNECTOR
2.	233-6131	[1]	SENSOR GP-TEMPERATURE (EVAPORATOR)
	9X-3401	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	153-5043 L		SLEEVE (1-DM)
	230-4012	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
3.	256-6454	[2]	SENSOR-TEMPERATURE (2-PIN)(AIR OUTLET)
4.	271-9408 M	[1]	SCREW-TRUSS HEAD (M5X0.8X10-MM)
7.	334-1656	[6]	NUT-THREAD INSERT
8.	355-1791	[1]	VALVE-EXPANSION
9.	361-5586	[1]	BLOWER AS (24-VOLT)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-3401	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
10.	364-5845	[3]	LATCH (FILTER)
11.	399-7825	[1]	CASE
12.	399-7827	[1]	COIL AS-HEATER
13.	399-7828	[1]	COIL AS-EVAPORATOR
14.	399-7831	[1]	PANEL AS
15.	399-7832	[1]	COVER AS-FILTER
16.	399-7833	[1]	BRACKET
17.	399-7834	[1]	BRACKET
18.	399-7837	[1]	KIT-GASKET
			(INCLUDES GASKETS)
19.	399-7844	[1]	STRAP-CABLE
20.	399-7846	[3]	RETAINER
21.	399-7847	[1]	CASE AS
22.	421-1021 Y	[1]	HARNESS AS-HEATER & AIR COND
24.	208-8469 M	[3]	LOCKNUT (M6X1-THD)
25.	208-9278 M	[7]	BOLT-FLANGE HEAD (M6X1X25-MM)
26.	311-3520	[25]	SCREW-HEX HEAD (8-16X0.5-IN)
27.	6V-8653 M	[2]	BOLT-SOCKET HEAD (M6X1X40-MM)
28.	6V-9824	[2]	RING-RETAINING
30.	8T-0337 M	[6]	SCREW-MACHINE (M4X0.7X12-MM)
31.		[2]	VALVE (HVAC)
33.	159-1503	[2]	CLAMP-HOSE
34.	9X-2133 E		HOSE (41-CM EACH)
35.	501-7878	[1]	GROMMET
	E		ORDER BY THE CENTIMETER
	L		ORDER BY THE DECIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP67531327

415-1735: AIR CONDITIONER GP

AIR CONDITIONER GP

415-1735 AIR CONDITIONER GP
S/N N8T1101-UP
PART OF 445-8660 AIR CONDITIONER GP
Type 2

i07026824 SEBP6753

For full view, you need register

Parts for your 980M WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	501-7878	[1]	GROMMET
2.	233-6131	[1]	SENSOR GP-TEMPERATURE (EVAPORATOR)
3.	256-6454	[2]	SENSOR-TEMPERATURE (2-PIN)(AIR OUTLET)
4.	271-9408 M	[1]	SCREW-TRUSS HEAD (M5X0.8X10-MM)
7.	334-1656	[6]	NUT-THREAD INSERT
8.	355-1791	[1]	VALVE-EXPANSION
9.	361-5586	[1]	BLOWER AS (24-VOLT)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-3401	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
10.	364-5845	[3]	LATCH (FILTER)
11.	399-7825	[1]	CASE
12.	399-7827	[1]	COIL AS-HEATER
13.	399-7828	[1]	COIL AS-EVAPORATOR
14.	399-7831	[1]	PANEL AS
15.	399-7832	[1]	COVER AS-FILTER
16.	399-7833	[1]	BRACKET
17.	399-7834	[1]	BRACKET
18.	399-7837	[1]	KIT-GASKET
			(INCLUDES GASKETS)
19.	399-7844	[1]	STRAP-CABLE
20.	399-7846	[3]	RETAINER
21.	399-7847	[1]	CASE AS
22.	421-1021 Y	[1]	HARNESS AS-HEATER & AIR COND
24.	208-8469 M	[3]	LOCKNUT (M6X1-THD)
25.	208-9278 M	[7]	BOLT-FLANGE HEAD (M6X1X25-MM)
26.	311-3520	[25]	SCREW-HEX HEAD (8-16X0.5-IN)
27.	6V-8653 M	[2]	BOLT-SOCKET HEAD (M6X1X40-MM)
28.	6V-9824	[2]	RING-RETAINING
30.	8T-0337 M	[6]	SCREW-MACHINE (M4X0.7X12-MM)
31.	323-5864 C	[2]	VALVE (CONDENSATION DRAIN)
33.	159-1503	[2]	CLAMP-HOSE
34.	267-8575 CL		TUBE (5-DM EACH)
	C		CHANGE FROM PREVIOUS TYPE
	L		ORDER BY THE DECIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP67531328

437-7412: AIR CONDITIONER GP

AIR CONDITIONER GP

437-7412 AIR CONDITIONER GP
S/N N8T1-1100
PART OF 366-2734 AIR CONDITIONER & MOUNTING GP

i05499670 SEBP6753

For full view, you need register

Parts for your 980M WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	133-8714	[1]	GROMMET
2.	233-6131	[1]	SENSOR GP-TEMPERATURE (EVAPORATOR)
3.	256-6454	[2]	SENSOR-TEMPERATURE (2-PIN)(RECIRCULATION)
5.	291-9130	[1]	PAN-DRAIN
7.	291-9135	[1]	PLATE AS
8.	471-1123 Y	[1]	VALVE GP-WATER
9.	302-8935	[2]	SEAL
10.	302-9104	[1]	SEAL
11.	302-9140	[1]	SEAL
12.	303-0955	[1]	GASKET
13.	303-1297	[1]	SEAL
14.	5P-5923	[1]	SEAL
15.	322-4474	[1]	FILM-INFORMATION (24-VOLT HEATER)
16.	323-5864	[2]	VALVE
17.	325-3363	[1]	BRACKET AS
18.	327-0282	[1]	SEAL-INTEGRAL (1/2-IN)
19.	327-0283	[1]	SEAL-INTEGRAL (3/4-IN)
20.	340-4192	[2]	GROMMET
21.	355-1791	[1]	VALVE-EXPANSION
22.	361-5586	[1]	BLOWER AS (24-VOLT)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-3401	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
23.	369-7658	[1]	COIL AS-EVAPORATOR
	325-4416 M	[2]	STUD (M8X1.25X52-MM)
	327-0282	[1]	SEAL-INTEGRAL (1/2-IN)
	327-0283	[1]	SEAL-INTEGRAL (3/4-IN)
24.	370-2061	[2]	FILM-INFORMATION (FILTER MISSING)
25.	370-2062	[1]	FILM-INFORMATION (AIR FLOW)
26.	432-8440 Y	[1]	HARNESS AS-HEATER & AIR COND
27.	151-6282 M	[2]	BOLT-SOCKET HEAD (M6X1X40-MM)
28.	206-1345	[3]	STRAP-CABLE
29.	225-4986 M	[2]	NUT (M18X1.5-THD)
30.	248-6772	[2]	SCREW-MACHINE (8-16X7.75-IN)
31.	291-9134	[1]	COIL AS-HEATER
32.	3S-2093	[3]	STRAP-CABLE
33.	8T-0337 M	[9]	SCREW-MACHINE (M4X0.7X12-MM)
34.	8T-4138 M	[14]	BOLT (M6X1X20-MM)
35.	8T-4205	[14]	WASHER-HARD (7.2X14.5X2-MM THK)
36.	9X-2044 M	[21]	SCREW-TRUSS HEAD (M6X1X16-MM)
37.	9X-2488	[2]	CLAMP-HOSE
38.	136-1953 E		HOSE (11-CM)
39.	5P-5930 D		SEAL (0.1-M EACH)
40.	5P-5672 D		SEAL (1.5-M)
41.	267-8575 J		TUBE (2-DM EACH)
42.	520-6380	[1]	BRACKET
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	J		ORDER BY THE DECIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP67531329

445-8660: AIR CONDITIONER GP

AIR CONDITIONER GP

445-8660 AIR CONDITIONER GP
S/N N8T1101-UP
PART OF 505-5843 CAB AR
Type 1

i06787172 SEBP6753

For full view, you need register

Parts for your 980M WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[1]	STRAP-CABLE
2.	5P-3928	[1]	COUPLING AS-REFRIGERANT (SELF-SEALING)
3.	7K-3176	[1]	COUPLING AS-REFRIGERANT (SELF-SEALING)
4.	7K-3304	[1]	NUT-JAM (1-20-THD)
5.	290-2288	[1]	FILTER-AIR
6.	327-0282	[3]	SEAL-INTEGRAL (1/2-IN)
7.	327-0283	[1]	SEAL-INTEGRAL (3/4-IN)
8.	355-1790	[1]	CLAMP
9.	355-1793	[1]	DRYER AS-REFRIGERANT
10.	399-7830	[1]	COVER AS
	275-6710	[2]	RETAINER (PUSH ON)
	288-3657 M	[2]	SCREW-THUMB (M6X1X10-MM)
11.	415-1735 Y	[1]	AIR CONDITIONER GP
12.	444-7192	[1]	BRACKET AS
	6V-9632 M	[12]	NUT-WELD (M6X1-THD)
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
13.	445-8661	[1]	HOSE AS
14.	445-8662 I	[1]	HOSE AS
15.	445-8769	[1]	BRACKET
16.	451-2963	[1]	BRACKET
17.	453-5250 Y	[1]	VALVE GP-WATER
18.	453-5251	[1]	TUBE
19.	454-9261	[1]	TUBE AS
20.	091-0081	[2]	SPACER (10.5X20X10-MM THK)
21.	159-1503	[6]	CLAMP-HOSE
22.	178-3336 M	[2]	NUT-HEX FLANGE (M8X1.25-THD)
23.	209-8296 M	[1]	BOLT-SOCKET HEAD (M8X1.25X25-MM)
24.	2M-1444	[4]	SCREW-TAPPING (8-18X0.3-IN)
25.	344-5673 M	[2]	NUT (M6X1-THD)
26.	449-2042	[1]	HOSE AS
27.	5P-4106	[1]	NUT (1-7/16-16-THD)
28.	6V-9632 M	[2]	NUT-WELD (M6X1-THD)
29.	7X-7729	[1]	WASHER (11X25X3-MM THK)
30.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
31.	8T-4138 M	[14]	BOLT (M6X1X20-MM)
32.	8T-4196 M	[1]	BOLT (M10X1.5X35-MM)
33.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
34.	9M-7959	[2]	CLAMP-HOSE
35.	9M-8406	[4]	CLIP (LOOP)
36.	9X-6165	[14]	WASHER (6.5X22X2.5-MM THK)
37.	9X-7383	[1]	SEAL-O-RING
38.	9X-7384	[1]	SEAL-O-RING
39.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
40.	5P-0767 E		HOSE (19-CM)
40A.	5P-0767 E		HOSE (12-CM)
40B.	5P-0767 E		HOSE (7-CM)
	E		ORDER BY THE CENTIMETER
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION