OPERATOR STATION
CONTROL GP-ELECTROHYDRAULICOPERATOR STATION
CONTROL GP-ELECTROHYDRAULIC
#SEBP67621630
491-9604: KIT-JOYSTICK CONTROL
For full view, you need register
Parts for your 950M WHEEL LOADER:
CATERPILLAR SIS#SEBP67621631
509-8196: KIT-JOYSTICK CONTROL
For full view, you need register
Parts for your 950M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 285-8015 H | [1] | FILM-IDENTIFICATION (JOYSTICK CONTROL, 2-FUNCTION) | |
| 2. | 416-5284 H | [1] | FILM-IDENTIFICATION (JOYSTICK CONTROL, 2-FUNCTION) | |
| 3. | 458-8669 HY | [1] | CONTROL GP-JOYSTICK (2-VALVE) | |
| 4. | 112-6646 HM | [4] | LOCKNUT (M6X1-THD) | |
| 5. | 9X-2043 HM | [4] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| H | FROM CONTROL & MTG GP-ELHYD | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP67621632
509-8217: KIT-JOYSTICK CONTROL
For full view, you need register
Parts for your 950M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 189-2077 H | [1] | FILM-IDENTIFICATION (LIFT, FLOAT, LOWER) | |
| 2. | 189-2078 H | [1] | FILM-IDENTIFICATION (DUMP, TILT BACK) | |
| 3. | 189-2079 H | [1] | FILM-INSTRUCTION (MAINTENANCE) | |
| 4. | 201-1531 H | [1] | FILM-IDENTIFICATION (AUTODIG) | |
| 5. | 228-6089 H | [1] | PLUG (ROCKER SWITCH) | |
| 6. | 268-6497 H | [1] | FILM-IDENTIFICATION (PAYLOAD STORE) | |
| 7. | 275-6530 H | [1] | FILM-IDENTIFICATION (HORN, TRANSMISSION DIRECTION) | |
| 8. | 284-3623 J | [1] | SWITCH AS-ROCKER (24-VOLT)(IMPLEMENT LOCKOUT) | |
| 9. | 324-6610 H | [1] | SWITCH AS-ROCKER (FORWARD, NEUTRAL, REVERSE) | |
| 9X-3401 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 281-3121 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 281-3122 | [1] | RECEPTACLE AS-CONNECTOR | ||
| 10. | 361-6015 JY | [1] | CONTROL GP-HANDLE (LIFT POSITION) | |
| 10A. | 361-6015 JY | [1] | CONTROL GP-HANDLE (TILT POSITION) | |
| 11. | 367-7475 H | [1] | COVER | |
| 12. | 367-7478 H | [1] | BRACKET AS | |
| 13. | 096-1349 | [1] | CLIP | |
| 14. | 132-5789 J | [2] | CLIP (LADDER) | |
| 15. | 156-6175 J | [1] | CLIP (LADDER) | |
| 16. | 230-5010 J | [1] | PLUG AS-CONNECTOR (6-PIN) | |
| 455-0707 | [1] | SEAL-CONNECTOR | ||
| 17. | 239-7352 J | [1] | PLUG AS-CONNECTOR (6-PIN) | |
| 455-0707 | [1] | SEAL-CONNECTOR | ||
| 18. | 332-2155 J | [1] | SWITCH AS-PUSH BUTTON (THROTTLE LOCK ON, OFF) | |
| 18A. | 332-2155 J | [1] | SWITCH AS-PUSH BUTTON (HORN) | |
| (EACH SWITCH AS INCLUDES) | ||||
| 6F-0253 | [1] | LOCKWASHER | ||
| 8T-8730 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 172-3511 | [1] | NUT (5/8-24-THD) | ||
| 19. | 367-7474 H | [1] | COVER | |
| 20. | 4P-7581 J | [2] | CLIP (LADDER) | |
| 21. | 502-0275 JY | [1] | HARNESS AS-CONTROL | |
| 22. | 5C-2890 JM | [1] | NUT (M6X1-THD) | |
| 23. | 5C-9553 HM | [3] | BOLT (M6X1X16-MM) | |
| 24. | 6V-7357 JM | [1] | BOLT (M6X1X25-MM) | |
| 25. | 7K-1181 J | [12] | STRAP-CABLE | |
| 26. | 8R-3695 | [3] | GROMMET | |
| 27. | 8T-4189 JM | [3] | BOLT (M8X1.25X20-MM) | |
| 28. | 8T-4205 | [5] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 29. | 8T-4224 J | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 30. | 9X-2043 JM | [1] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| 31. | 9X-2045 M | [15] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 32. | 9X-6165 J | [1] | WASHER (6.5X22X2.5-MM THK) | |
| H | PART OF CONTROL & MTG GP-ELHYD | |||
| J | PART OF WIRING GP-CONTROL | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP67621633
509-8218: KIT-JOYSTICK CONTROL
For full view, you need register
Parts for your 950M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 189-2077 J | [1] | FILM-IDENTIFICATION (LIFT, FLOAT, LOWER) | |
| 2. | 189-2078 J | [1] | FILM-IDENTIFICATION (DUMP, TILT BACK) | |
| 3. | 189-2079 J | [1] | FILM-INSTRUCTION (MAINTENANCE) | |
| 4. | 201-1531 J | [1] | FILM-IDENTIFICATION (AUTODIG) | |
| 5. | 201-5563 J | [1] | FILM-IDENTIFICATION (AUXILIARY HYDRAULIC) | |
| 6. | 228-6089 J | [3] | PLUG (ROCKER SWITCH) | |
| 7. | 268-6497 J | [1] | FILM-IDENTIFICATION (PAYLOAD STORE) | |
| 8. | 275-6530 J | [1] | FILM-IDENTIFICATION (HORN, TRANSMISSION DIRECTION) | |
| 9. | 361-6015 JY | [1] | CONTROL GP-HANDLE | |
| 10. | 367-7476 J | [1] | COVER | |
| 11. | 367-7477 J | [1] | COVER | |
| 12. | 367-7479 J | [1] | BRACKET AS | |
| 13. | 5C-2890 JM | [3] | NUT (M6X1-THD) | |
| 14. | 8R-3695 | [5] | GROMMET | |
| 15. | 8T-4138 JM | [3] | BOLT (M6X1X20-MM) | |
| 16. | 8T-4205 J | [6] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 17. | 9X-2045 M | [19] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| J | PART OF CONTROL & MTG GP-ELHYD | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP67621634
509-8220: KIT-JOYSTICK CONTROL
509-8220 KIT-JOYSTICK CONTROL
S/N EMB1-UP
S/N EMB1-UP
For full view, you need register
Parts for your 950M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 361-6015 Y | [1] | CONTROL GP-HANDLE | ||
| 502-0277 Y | [1] | WIRING GP-CONTROL | ||
| 349-2600 | [1] | ADJUSTER GP-CONTROL | ||
| 8T-4138 M | [3] | BOLT (M6X1X20-MM) | ||
| 367-7479 | [1] | BRACKET AS | ||
| 389-0890 | [1] | CONTROL AS-PROPORTIONAL | ||
| 367-7476 | [1] | COVER | ||
| 501-8398 | [1] | COVER | ||
| 443-9873 | [1] | CUSHION AS | ||
| 189-2077 | [1] | FILM-IDENTIFICATION (LIFT, FLOAT, LOWER) | ||
| 189-2078 | [1] | FILM-IDENTIFICATION (DUMP, TILT BACK) | ||
| 201-1531 | [1] | FILM-IDENTIFICATION (AUTODIG) | ||
| 201-5563 | [1] | FILM-IDENTIFICATION (AUXILIARY HYDRAULIC) | ||
| 268-6497 | [1] | FILM-IDENTIFICATION (PAYLOAD STORE) | ||
| 275-6530 | [1] | FILM-IDENTIFICATION (HORN, TRANSMISSION DIRECTION) | ||
| 189-2079 | [1] | FILM-INSTRUCTION (MAINTENANCE) | ||
| 8R-3695 | [4] | GROMMET | ||
| 5C-2890 M | [3] | NUT (M6X1-THD) | ||
| 5C-7261 M | [3] | NUT (M8X1.25-THD) | ||
| 228-6089 | [2] | PLUG (ROCKER SWITCH) | ||
| 9X-2045 M | [16] | SCREW-TRUSS HEAD (M6X1X20-MM) | ||
| 324-6610 | [1] | SWITCH AS-ROCKER (FORWARD, NEUTRAL, REVERSE) | ||
| 8T-4205 | [6] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 8T-4224 | [3] | WASHER-HARD (8.8X16X2-MM THK) | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP67621635
509-8222: KIT-JOYSTICK CONTROL
For full view, you need register
Parts for your 950M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 495-0882 Y | [1] | CONTROL & MTG GP-ELHYD | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP67621636
509-8222: KIT-JOYSTICK CONTROL
For full view, you need register
Parts for your 950M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 201-1531 CJ | [1] | FILM-IDENTIFICATION (AUTODIG) | |
| 2. | 228-6089 CH | [1] | PLUG (ROCKER SWITCH) | |
| 3. | 268-6497 CJ | [1] | FILM-IDENTIFICATION (PAYLOAD STORE) | |
| 4. | 284-3623 CH | [1] | SWITCH AS-ROCKER (24-VOLT)(IMPLEMENT LOCKOUT) | |
| 5. | 371-1624 CJ | [1] | COVER | |
| 6. | 372-1260 CJ | [1] | BRACKET AS | |
| 7. | 375-5944 CJ | [1] | COVER | |
| 8. | 458-8673 CJY | [1] | CONTROL GP-HANDLE (2-VALVE) | |
| 9. | 091-8792 CH | [1] | CLIP | |
| 10. | 112-6646 CJM | [4] | LOCKNUT (M6X1-THD) | |
| 11. | 132-5789 CH | [2] | CLIP (LADDER) | |
| 12. | 156-6175 CH | [1] | CLIP (LADDER) | |
| 13. | 230-5010 CH | [1] | PLUG AS-CONNECTOR (6-PIN) | |
| 455-0707 | [1] | SEAL-CONNECTOR | ||
| 14. | 2Y-5829 CHM | [1] | NUT (M10X1.5-THD) | |
| 15. | 366-4865 CJ | [1] | FILM-IDENTIFICATION (JOYSTICK, 2-FUNCTION) | |
| 16. | 4P-7581 CH | [3] | CLIP (LADDER) | |
| 17. | 502-0276 CHY | [1] | HARNESS AS-CONTROL | |
| 18. | 503-5968 CHY | [1] | HARNESS AS-WIRING (SEAT BELT) | |
| 19. | 505-6528 CH | [1] | BRACKET | |
| 20. | 5C-2890 CM | [4] | NUT (M6X1-THD) | |
| 21. | 6V-7357 CHM | [1] | BOLT (M6X1X25-MM) | |
| 22. | 7K-1181 CH | [17] | STRAP-CABLE | |
| 23. | 8R-3695 C | [4] | GROMMET | |
| 24. | 8T-4138 CJM | [3] | BOLT (M6X1X20-MM) | |
| 25. | 8T-4189 CHM | [3] | BOLT (M8X1.25X20-MM) | |
| 26. | 8T-4191 CHM | [1] | BOLT (M10X1.5X16-MM) | |
| 27. | 8T-4205 C | [8] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 28. | 8T-4224 CH | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 29. | 9X-2043 CHM | [1] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| 30. | 9X-2044 CJM | [4] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 31. | 9X-2045 CJM | [4] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 32. | 9X-6165 CH | [1] | WASHER (6.5X22X2.5-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| H | FROM WIRING GP-CONTROL | |||
| J | FROM CONTROL & MTG GP-ELHYD | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP67621637
509-8224: KIT-JOYSTICK CONTROL
For full view, you need register
Parts for your 950M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 458-8674 Y | [1] | CONTROL GP-HANDLE (3-VALVE) | ||
| 285-8016 H | [1] | FILM-IDENTIFICATION (JOYSTICK CONTROL, 3-FUNCTION) | ||
| 366-4866 J | [1] | FILM-IDENTIFICATION (JOYSTICK, 3-FUNCTION) | ||
| 112-6646 M | [4] | LOCKNUT (M6X1-THD) | ||
| 9X-2045 M | [4] | SCREW-TRUSS HEAD (M6X1X20-MM) | ||
| H | USE WHEN EQUIPPED WITH HEAVY DUTY CONTROLS | |||
| J | USE WHEN EQUIPPED WITH MEDIUM DUTY CONTROLS | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP67621638
509-8226: KIT-JOYSTICK CONTROL
For full view, you need register
Parts for your 950M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 458-8675 HY | [1] | CONTROL GP-JOYSTICK (4-VALVE) | |
| 2. | 201-1531 | [1] | FILM-IDENTIFICATION (AUTODIG) | |
| 3. | 268-6497 | [1] | FILM-IDENTIFICATION (PAYLOAD STORE) | |
| 4. | 349-2600 H | [1] | ADJUSTER GP-CONTROL | |
| 131-3987 M | [2] | SCREW (M4X0.7X12-MM) | ||
| 349-2593 | [1] | HANDLE | ||
| 5. | 366-4866 H | [1] | FILM-IDENTIFICATION (JOYSTICK, 3-FUNCTION) | |
| 6. | 371-1624 H | [1] | COVER | |
| 7. | 372-1260 H | [1] | BRACKET AS | |
| 8. | 375-5944 H | [1] | COVER | |
| 9. | 443-9873 H | [1] | CUSHION AS | |
| 205-7048 M | [4] | INSERT-THREADED (M6X1-X14.73-MM) | ||
| 10. | 502-0278 HY | [1] | WIRING GP-CONTROL | |
| 11. | 112-6646 HM | [4] | LOCKNUT (M6X1-THD) | |
| 12. | 5C-2890 HM | [3] | NUT (M6X1-THD) | |
| 13. | 5C-7261 HM | [3] | NUT (M8X1.25-THD) | |
| 14. | 8R-3695 H | [2] | GROMMET | |
| 15. | 8T-4138 HM | [3] | BOLT (M6X1X20-MM) | |
| 16. | 8T-4205 H | [6] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 17. | 8T-4224 H | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 18. | 9X-2044 HM | [4] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 19. | 9X-2045 HM | [9] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| H | FROM CONTROL & MTG GP-ELHYD | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP67621639
509-8228: KIT-JOYSTICK CONTROL
For full view, you need register
Parts for your 950M WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 189-2077 J | [1] | FILM-IDENTIFICATION (LIFT, FLOAT, LOWER) | |
| 2. | 189-2078 J | [1] | FILM-IDENTIFICATION (DUMP, TILT BACK) | |
| 3. | 189-2079 J | [1] | FILM-INSTRUCTION (MAINTENANCE) | |
| 4. | 201-1531 H | [1] | FILM-IDENTIFICATION (AUTODIG) | |
| 5. | 201-5563 J | [1] | FILM-IDENTIFICATION (AUXILIARY HYDRAULIC) | |
| 6. | 268-6497 H | [1] | FILM-IDENTIFICATION (PAYLOAD STORE) | |
| 7. | 275-6530 J | [1] | FILM-IDENTIFICATION (HORN, TRANSMISSION DIRECTION) | |
| 8. | 290-1265 J | [1] | COVER | |
| 9. | 449-4002 J | [1] | FILM-IDENTIFICATION (PEDAL LOCK) | |
| 10. | 450-5070 J | [1] | FILM-INFORMATION (DIFFERENTIAL LOCK, HORN) | |
| 11. | 361-6015 JY | [1] | CONTROL GP-HANDLE | |
| 12. | 172-8591 JM | [2] | NUT-CLIP (M6X1-THD) | |
| 13. | 9X-2043 JM | [3] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| 14. | 9X-2044 JM | [2] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 15. | 9X-2045 JM | [4] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| H | FROM MONITOR AR-PAYLOAD | |||
| J | FROM CONTROL & MTG GP-ELHYD | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
