GENERATORS
GENERATOR GPGENERATORS
GENERATOR GP
#SEBP67810510
372-3064: GENERATOR AR
For full view, you need register
Parts for your G3520H GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 372-3063 Y | [1] | GENERATOR GP | |
| 118-8452 F | [1] | FILM-INFORMATION (GENERATOR) | ||
| INSTALL FILM ON THE RH SIDE OF THE GENERATOR BARREL, CENTERED FROM FRONT TO BACK, | ||||
| APPROX. 100MM DOWN FROM THE CENTER LINE AT THE TOP OF THE GENERATOR. | ||||
| INSTALL CLEAR LAMINATE OVER FILM. | ||||
| 225-3224 F | [3] | FILM-WARNING (AUTOMATIC ENGINE START) | ||
| INSTALL ONE FILM ON THE REAR OF GENERATOR TERMINAL BOX DIRECTLY BELOW THE ELECTROCUTION HAZARD FILM, | ||||
| AND ONE FILM ON THE RH & LH SIDES OF THE TERMINAL BOX, CENTERED ABOVE THE CRUSH WARNING, | ||||
| IF THE GENERATOR IS EQUIPPED WITH CIRCUIT BREAKER ON EITHER SIDE, | ||||
| MOVE FILM ABOVE THE BREAKER COVER DIRECTLY BELOW THE 229-5047 FILM. | ||||
| 225-3227 F | [2] | FILM-WARNING (HOT SURFACE) | ||
| INSTALL ONE FILM ON EACH SIDE OF THE GENERATOR BARREL, DIRECTLY ON THE GENERATOR BARREL, NOT ON THE BARREL COVER. | ||||
| IF THERE IS NO BARREL COVER, CENTER FILMS ON EACH SIDE OF THE BARREL FROM FRONT TO REAR, | ||||
| AND ON THE RH SIDE, CENTER FILM BELOW THE 118-8452 GLPS GENERATOR INFO FILM. | ||||
| 228-4798 F | [1] | FILM-IDENTIFICATION (GROUND) | ||
| INSTALL NEAR GENERATOR GROUND BOLT OR GENERATOR GROUND CUSTOMER CONNECTION POINT. | ||||
| 229-5047 F | [3] | FILM-WARNING (SHOCK HAZARD, READ OMM) | ||
| INSTALL ONE FILM ON THE REAR OF THE GENERATOR TERMINAL BOX, | ||||
| CENTERED AT THE TOP OF THE TERMINAL BOX BELOW THE CATERPILLAR DECAL, | ||||
| AND ONE FILM ON THE RH & LH SIDE OF TERMINAL BOX CENTERED ABOVE THE AUTO START WARNING, | ||||
| IF THE GENERATOR IS EQUIPPED WITH A CIRCUIT BREAKER ON EITHER SIDE | ||||
| MOVE FILM ABOVE THE BREAKER COVER CENTERED AT THE TOP EDGE OF THE TERMINAL BOX COVER. | ||||
| 303-3433 F | [1] | FILM-IDENTIFICATION (CATERPILLAR) | ||
| INSTALL FILM ON THE REAR PANEL OF THE GENERATOR TERMINAL BOX, | ||||
| CENTERED APPROX. 30MM FROM THE TOP EDGE OF THE LOWER TERMINAL BOX COVER. | ||||
| 303-3440 F | [2] | FILM-IDENTIFICATION (CAT) | ||
| INSTALL ONE FILM ON THE RH & LH SIDE OF THE GENERATOR TERMINAL BOX, AT THE TOP LH CORNER OF THE TERMINAL BOX COVER, | ||||
| ALIGN EACH FILM WITH THE EDGES OF THE TERMINAL BOX COVER. | ||||
| IF THERE IS A CIRCUIT BREAKER, MOVE FILM TO THE BOTTOM OF THE COVER, | ||||
| BELOW THE CIRCUIT BREAKER, ALIGN FILM WITH THE EDGES OF THE COVER. | ||||
| F | NOT SHOWN | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP67810511
390-0466: GENERATOR AR
390-0466 GENERATOR AR
S/N G7Y1-UP
60-HERTZ. 12470-VOLT. 3044-FRAME. 4-POLE. 6-LEAD. 2-BEARING
S/N G7Y1-UP
60-HERTZ. 12470-VOLT. 3044-FRAME. 4-POLE. 6-LEAD. 2-BEARING
For full view, you need register
Parts for your G3520H GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 390-0465 Y | [1] | GENERATOR GP | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP67810512
424-7058: GENERATOR AR
424-7058 GENERATOR AR
S/N G7Y1-UP
60-HERTZ. 6300/6600/6900-VOLT. 3044-FRAME. 4-POLE. 6-LEAD. 2-BEARING
S/N G7Y1-UP
60-HERTZ. 6300/6600/6900-VOLT. 3044-FRAME. 4-POLE. 6-LEAD. 2-BEARING
For full view, you need register
Parts for your G3520H GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 424-7057 Y | [1] | GENERATOR GP | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP67810513
425-1768: GENERATOR AR
425-1768 GENERATOR AR
S/N G7Y1-UP
60-HERTZ. 13200/13800-VOLT. 3044-FRAME. 4-POLE. 6-LEAD. 2-BEARING
S/N G7Y1-UP
60-HERTZ. 13200/13800-VOLT. 3044-FRAME. 4-POLE. 6-LEAD. 2-BEARING
For full view, you need register
Parts for your G3520H GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 425-1767 Y | [1] | GENERATOR GP | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP67810514
461-4098: GENERATOR AR
461-4098 GENERATOR AR
S/N G7Y1-UP
60-HERTZ. 4160-VOLT. 3044-FRAME. 4-POLE. 6-POLE. 2-BEARING
S/N G7Y1-UP
60-HERTZ. 4160-VOLT. 3044-FRAME. 4-POLE. 6-POLE. 2-BEARING
For full view, you need register
Parts for your G3520H GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 461-4097 Y | [1] | GENERATOR GP | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP67810515
494-0238: GENERATOR AR
For full view, you need register
Parts for your G3520H GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 494-0237 Y | [1] | GENERATOR GP | ||
| 228-4798 | [2] | FILM-IDENTIFICATION (GROUND) | ||
| INSTALL NEAR GENERATOR GROUND BOLT OR GENERATOR GROUND CUSTOMER CONNECTION POINT. ****** USE AS REQUIRED ****** | ||||
| 303-3428 | [1] | FILM-IDENTIFICATION (CAT) | ||
| INSTALL FILM ON THE REAR PANEL OF THE GENERATOR TERMINAL BOX, CENTERED AT THE TOP OF THE REAR PANEL. | ||||
| 303-3440 | [2] | FILM-IDENTIFICATION (CAT) | ||
| INSTALL ONE FILM ON THE RH & LH SIDE OF THE GENERATOR TERMINAL BOX, AT THE TOP LH CORNER OF THE LOWER TERMINAL BOX COVER, ALIGN EACH FILM WITH THE EDGES OF THE COVER. ***IF THERE IS A CIRCUIT BREAKER*** MOVE FILM TO THE BOTTOM OF THE COVER, BELOW THE CIRCUIT BREAKER, ALIGN FILM WITH THE EDGES OF THE COVER. | ||||
| 118-8452 | [1] | FILM-INFORMATION (GENERATOR) | ||
| INSTALL FILM ON THE RH SIDE OF THE GENERATOR BARREL, CENTERED FROM FRONT TO BACK, APPROX. 100MM DOWN FROM THE CENTER LINE AT THE TOP OF THE GENERATOR. (INSTALL FILM ON THE BARREL COVER IF AVAILABLE.) INSTALL CLEAR LAMINATE OVER FILM. | ||||
| 225-3224 | [2] | FILM-WARNING (AUTOMATIC ENGINE START) | ||
| INSTALL ONE FILM ON THE RH AND LH SIDES OF THE GENERATOR TERMINAL BOX, CENTERED ABOVE THE CRUSH WARNING FILM. | ||||
| 225-3227 | [2] | FILM-WARNING (HOT SURFACE) | ||
| INSTALL ONE FILM ON EACH SIDE OF THE GENERATOR BARREL, DIRECTLY ON THE GENERATOR BARREL, NOT ON THE BARREL COVER. IF THERE IS NO BARREL COVER, CENTER FILMS ON EACH SIDE THE BARREL FROM FRONT TO REAR, AND ON THE RH SIDE, CENTER FILM BELOW THE 118-8452 GLPS GENERATOR INFO FILM. | ||||
| 229-5047 | [2] | FILM-WARNING (SHOCK HAZARD, READ OMM) | ||
| INSTALL ONE FILM ON THE RH AND LH SIDES OF THE GENERATOR TERMINAL BOX, CENTERED ABOVE THE AUTO START WARNING. | ||||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP67810516
494-0240: GENERATOR AR
For full view, you need register
Parts for your G3520H GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 494-0239 Y | [1] | GENERATOR GP | ||
| 228-4798 | [2] | FILM-IDENTIFICATION (GROUND) | ||
| INSTALL NEAR GENERATOR GROUND BOLT OR GENERATOR GROUND CUSTOMER CONNECTION POINT. ****** USE AS REQUIRED ****** | ||||
| 303-3428 | [1] | FILM-IDENTIFICATION (CAT) | ||
| INSTALL FILM ON THE REAR PANEL OF THE GENERATOR TERMINAL BOX, CENTERED AT THE TOP OF THE REAR PANEL. | ||||
| 303-3440 | [2] | FILM-IDENTIFICATION (CAT) | ||
| INSTALL ONE FILM ON THE RH & LH SIDE OF THE GENERATOR TERMINAL BOX, AT THE TOP LH CORNER OF THE LOWER TERMINAL BOX COVER, ALIGN EACH FILM WITH THE EDGES OF THE COVER. ***IF THERE IS A CIRCUIT BREAKER*** MOVE FILM TO THE BOTTOM OF THE COVER, BELOW THE CIRCUIT BREAKER, ALIGN FILM WITH THE EDGES OF THE COVER. | ||||
| 118-8452 | [1] | FILM-INFORMATION (GENERATOR) | ||
| INSTALL FILM ON THE RH SIDE OF THE GENERATOR BARREL, CENTERED FROM FRONT TO BACK, APPROX. 100MM DOWN FROM THE CENTER LINE AT THE TOP OF THE GENERATOR. (INSTALL FILM ON THE BARREL COVER IF AVAILABLE.) INSTALL CLEAR LAMINATE OVER FILM. | ||||
| 225-3224 | [2] | FILM-WARNING (AUTOMATIC ENGINE START) | ||
| INSTALL ONE FILM ON THE RH AND LH SIDES OF THE GENERATOR TERMINAL BOX, CENTERED ABOVE THE CRUSH WARNING FILM. | ||||
| 225-3227 | [2] | FILM-WARNING (HOT SURFACE) | ||
| INSTALL ONE FILM ON EACH SIDE OF THE GENERATOR BARREL, DIRECTLY ON THE GENERATOR BARREL, NOT ON THE BARREL COVER. IF THERE IS NO BARREL COVER, CENTER FILMS ON EACH SIDE THE BARREL FROM FRONT TO REAR, AND ON THE RH SIDE, CENTER FILM BELOW THE 118-8452 GLPS GENERATOR INFO FILM. | ||||
| 229-5047 | [2] | FILM-WARNING (SHOCK HAZARD, READ OMM) | ||
| INSTALL ONE FILM ON THE RH AND LH SIDES OF THE GENERATOR TERMINAL BOX, CENTERED ABOVE THE AUTO START WARNING. | ||||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP67810517
494-0242: GENERATOR AR
For full view, you need register
Parts for your G3520H GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 494-0241 Y | [1] | GENERATOR GP | ||
| 228-4798 | [2] | FILM-IDENTIFICATION (GROUND) | ||
| INSTALL NEAR GENERATOR GROUND BOLT OR GENERATOR GROUND CUSTOMER CONNECTION POINT. ****** USE AS REQUIRED ****** | ||||
| 303-3428 | [1] | FILM-IDENTIFICATION (CAT) | ||
| INSTALL FILM ON THE REAR PANEL OF THE GENERATOR TERMINAL BOX, CENTERED AT THE TOP OF THE REAR PANEL. | ||||
| 303-3440 | [2] | FILM-IDENTIFICATION (CAT) | ||
| INSTALL ONE FILM ON THE RH & LH SIDE OF THE GENERATOR TERMINAL BOX, AT THE TOP LH CORNER OF THE LOWER TERMINAL BOX COVER, ALIGN EACH FILM WITH THE EDGES OF THE COVER. ***IF THERE IS A CIRCUIT BREAKER*** MOVE FILM TO THE BOTTOM OF THE COVER, BELOW THE CIRCUIT BREAKER, ALIGN FILM WITH THE EDGES OF THE COVER. | ||||
| 118-8452 | [1] | FILM-INFORMATION (GENERATOR) | ||
| INSTALL FILM ON THE RH SIDE OF THE GENERATOR BARREL, CENTERED FROM FRONT TO BACK, APPROX. 100MM DOWN FROM THE CENTER LINE AT THE TOP OF THE GENERATOR. (INSTALL FILM ON THE BARREL COVER IF AVAILABLE.) INSTALL CLEAR LAMINATE OVER FILM. | ||||
| 225-3224 | [2] | FILM-WARNING (AUTOMATIC ENGINE START) | ||
| INSTALL ONE FILM ON THE RH AND LH SIDES OF THE GENERATOR TERMINAL BOX, CENTERED ABOVE THE CRUSH WARNING FILM. | ||||
| 225-3227 | [2] | FILM-WARNING (HOT SURFACE) | ||
| INSTALL ONE FILM ON EACH SIDE OF THE GENERATOR BARREL, DIRECTLY ON THE GENERATOR BARREL, NOT ON THE BARREL COVER. IF THERE IS NO BARREL COVER, CENTER FILMS ON EACH SIDE THE BARREL FROM FRONT TO REAR, AND ON THE RH SIDE, CENTER FILM BELOW THE 118-8452 GLPS GENERATOR INFO FILM. | ||||
| 229-5047 | [2] | FILM-WARNING (SHOCK HAZARD, READ OMM) | ||
| INSTALL ONE FILM ON THE RH AND LH SIDES OF THE GENERATOR TERMINAL BOX, CENTERED ABOVE THE AUTO START WARNING. | ||||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP67810518
494-0244: GENERATOR AR
For full view, you need register
Parts for your G3520H GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 228-4798 | [2] | FILM-IDENTIFICATION (GROUND) | ||
| INSTALL NEAR GENERATOR GROUND BOLT OR GENERATOR GROUND CUSTOMER CONNECTION POINT. USE AS REQUIRED. | ||||
| 303-3428 | [1] | FILM-IDENTIFICATION (CAT) | ||
| INSTALL FILM ON THE REAR PANEL OF THE GENERATOR TERMINAL BOX, CENTERED AT THE TOP OF THE TOP OF THE REAR PANEL. | ||||
| 303-3440 | [2] | FILM-IDENTIFICATION (CAT) | ||
| INSTALL ONE FILM ON THE RH & LH SIDE OF THE GENERATOR TERMINAL BOX, AT THE TOP LH CORNER OF THE UPPER TERMINAL BOX COVER, ALIGN EACH FILM WITH THE EDGES OF THE COVER. IF THERE IS A CIRCUIT BREAKER MOVE FILM TO THE BOTTOM OF THE COVER, BELOW THE CIRCUIT BREAKER, ALIGN FILM WITH THE EDGES OF THE COVER. | ||||
| 118-8452 | [1] | FILM-INFORMATION (GENERATOR) | ||
| INSTALL FILM ON THE RH SIDE OF THE GENERATOR BARREL, CENTERED FROM FRONT TO BACK, APPROX. 100MM DOWN FROM THE CENTER LINE AT THE TOP OF THE GENERATOR. (INSTALL FILM ON THE BARREL COVER IF AVAILABLE.) INSTALL CLEAR LAMINATE OVER FILM. | ||||
| 225-3224 | [2] | FILM-WARNING (AUTOMATIC ENGINE START) | ||
| INSTALL ONE FILM ON THE RH & LH SIDES OF THE GENERATOR TERMINAL BOX, CENTERED DIRECTLY BELOW THE SHOCK WARNING LABEL. | ||||
| 225-3227 | [2] | FILM-WARNING (HOT SURFACE) | ||
| INSTALL ONE FILM ON EACH SIDE OF THE GENERATOR BARREL, DIRECTLY ON THE GENERATOR BARREL, NOT ON THE BARREL COVER. IF THERE IS NO BARREL COVER, CENTER FILMS ON EACH SIDE THE BARREL FROM FRONT TO REAR, AND ON THE RH SIDE, CENTER FILM BELOW THE 118-8452 GLPS GENERATOR INFO FILM. | ||||
| 229-5047 | [2] | FILM-WARNING (SHOCK HAZARD, READ OMM) | ||
| INSTALL ONE FILM ON THE RH & LH SIDES OF THE GENERATOR TERMINAL BOX, CENTERED DIRECTLY BELOW THE CAT POWER EDGE LABEL. | ||||
#SEBP67810519
494-0246: GENERATOR AR
For full view, you need register
Parts for your G3520H GENERATOR SET:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 228-4798 | [2] | FILM-IDENTIFICATION (GROUND) | ||
| INSTALL NEAR GENERATOR GROUND BOLT OR GENERATOR GROUND CUSTOMER CONNECTION POINT. USE AS REQUIRED. | ||||
| 303-3428 | [1] | FILM-IDENTIFICATION (CAT) | ||
| INSTALL FILM ON THE REAR PANEL OF THE GENERATOR TERMINAL BOX, CENTERED AT THE TOP OF THE TOP OF THE REAR PANEL. | ||||
| 303-3440 | [2] | FILM-IDENTIFICATION (CAT) | ||
| INSTALL ONE FILM ON THE RH & LH SIDE OF THE GENERATOR TERMINAL BOX, AT THE TOP LH CORNER OF THE UPPER TERMINAL BOX COVER, ALIGN EACH FILM WITH THE EDGES OF THE COVER. IF THERE IS A CIRCUIT BREAKER MOVE FILM TO THE BOTTOM OF THE COVER, BELOW THE CIRCUIT BREAKER, ALIGN FILM WITH THE EDGES OF THE COVER. | ||||
| 118-8452 | [1] | FILM-INFORMATION (GENERATOR) | ||
| INSTALL FILM ON THE RH SIDE OF THE GENERATOR BARREL, CENTERED FROM FRONT TO BACK, APPROX. 100MM DOWN FROM THE CENTER LINE AT THE TOP OF THE GENERATOR. (INSTALL FILM ON THE BARREL COVER IF AVAILABLE.) INSTALL CLEAR LAMINATE OVER FILM. | ||||
| 225-3224 | [2] | FILM-WARNING (AUTOMATIC ENGINE START) | ||
| INSTALL ONE FILM ON THE RH & LH SIDES OF THE GENERATOR TERMINAL BOX, CENTERED DIRECTLY BELOW THE SHOCK WARNING LABEL. | ||||
| 225-3227 | [2] | FILM-WARNING (HOT SURFACE) | ||
| INSTALL ONE FILM ON EACH SIDE OF THE GENERATOR BARREL, DIRECTLY ON THE GENERATOR BARREL, NOT ON THE BARREL COVER. IF THERE IS NO BARREL COVER, CENTER FILMS ON EACH SIDE THE BARREL FROM FRONT TO REAR, AND ON THE RH SIDE, CENTER FILM BELOW THE 118-8452 GLPS GENERATOR INFO FILM. | ||||
| 229-5047 | [2] | FILM-WARNING (SHOCK HAZARD, READ OMM) | ||
| INSTALL ONE FILM ON THE RH & LH SIDES OF THE GENERATOR TERMINAL BOX, CENTERED DIRECTLY BELOW THE CAT POWER EDGE LABEL. | ||||
