337-5792 WIRING GP-RIDE CONTROL S/N K3D1-UP PART OF 393-2072, 393-2074 CONTROL AR-RIDE, 393-2071, 393-2075 VALVE & LINES AR AN ATTACHMENT M313D



ELECTRICAL AND STARTING SYSTEM
WIRING GP
POWER TRAIN
AXLE GP

WHEELED EXCAVATOR M313D WHEELED EXCAVATOR K3D
 M313D Excavator K3D00001-UP (MACHINE) POWERED BY C4.4 Engine SEBP6801 M313D K3D   (2013)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-MIRROR
337-5800 WIRING GP-MIRROR
WIRING GP-MONITOR
337-5814 WIRING GP-MONITOR
WIRING GP-RIDE CONTROL
337-5792 WIRING GP-RIDE CONTROL
WIRING GP-SENSOR
360-8927 WIRING GP-SENSOR
WIRING GP-STABILIZER
337-5778 WIRING GP-STABILIZER
WIRING GP-STABILIZER
364-2785 WIRING GP-STABILIZER
 

#SEBP68010200
 

337-5792: WIRING GP-RIDE CONTROL

337-5792 WIRING GP-RIDE CONTROL
S/N K3D1-UP
PART OF 393-2072, 393-2074 CONTROL AR-RIDE, 393-2071, 393-2075 VALVE & LINES AR
AN ATTACHMENT
i04171795 SEBP6801
3375792 WIRING GP-RIDE CONTROL Parts scheme
  For full view, you need register

Parts for your M313D WHEELED EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 3S-2093 B [4] STRAP-CABLE  
2. 7K-1181 B [11] STRAP-CABLE  
3. 290-5562 [5] MOUNT (DUAL SWIVEL)  
4. 337-5793 Y [1] HARNESS AS-SENSOR (RIDE CONTROL)  
5. 204-2281 [1] STRAP-CABLE  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP68010201
 

360-8927: WIRING GP-SENSOR

360-8927 WIRING GP-SENSOR -AFTERTREATMENT
S/N K3D1-UP
PART OF 392-2627 SENSOR GP-TEMP & PRESS
AN ATTACHMENT
i05218213 SEBP6801
3608927 WIRING GP-SENSOR Parts scheme
  For full view, you need register

Parts for your M313D WHEELED EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 132-5789 [1] CLIP (LADDER)  
2. 360-8928 Y [1] HARNESS AS-SENSOR  
3. 3S-2093 [3] STRAP-CABLE  
4. 8T-0287 M [2] BOLT (M5X0.8X10-MM)  
5. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
6. 8T-4200 M [1] BOLT (M8X1.25X16-MM)  
7. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP68010202
 

337-5778: WIRING GP-STABILIZER

337-5778 WIRING GP-STABILIZER -FRONT & REAR, LH & RH
S/N K3D1-UP
PART OF 358-2162, 377-6069, 390-5100, 390-5107, 390-5109, 392-2057 UNDERCARRIAGE AR
AN ATTACHMENT
i04169369 SEBP6801
3375778 WIRING GP-STABILIZER Parts scheme
  For full view, you need register

Parts for your M313D WHEELED EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 337-5779 [1] HARNESS AS-CONSOLE (STABILIZER)  
  292-2896 E CONDUIT (16.9-MM ID)(61-CM)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8L-8413 [8] STRAP-CABLE (WHITE)  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [1] PLUG-SEAL  
  104-1995 [16] TERMINAL-BLADE (14-GA TO 18-GA)  
  111-7898 [4] CONNECTOR (8-PIN)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM)  
  9X-3402 [4] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  230-5008 [1] PLUG AS-CONNECTOR (4-PIN)  
  264-7031 [1] SEAL-CONNECTOR  
2. 7K-1181 B [3] STRAP-CABLE  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
 

#SEBP68010203
 

364-2785: WIRING GP-STABILIZER

364-2785 WIRING GP-STABILIZER -UNDERCARRIAGE
S/N K3D1-UP
PART OF 358-2162, 377-6069, 390-5100, 390-5107, 390-5109, 392-2057 UNDERCARRIAGE AR
AN ATTACHMENT
i04169489 SEBP6801
3642785 WIRING GP-STABILIZER Parts scheme
  For full view, you need register

Parts for your M313D WHEELED EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 5C-9553 M [2] BOLT (M6X1X16-MM)  
2. 5P-4116 [2] WASHER-HARD (8.8X20.5X2-MM THK)  
3. 175-3350 [1] PLUG AS-CONNECTOR  
4. 175-3352 [1] PLUG AS-CONNECTOR  
5. 199-6978 [1] ROD  
6. 237-0075 [1] HARNESS AS-SENSOR (TRAVEL SPEED)  
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDE RECEPTACLE AS & WEDGE)
  114-8843 E SLEEVE-PLASTIC (25-CM)  
  128-4178 [1] TERMINAL AS  
  2L-8068 [1] TERMINAL-RING (10-GA TO 12-GA, 5/16-IN SCREW)  
  5P-6006 D TUBE-HEAT SHRINK (9.52-MM DIA)(0.1-M)  
7. 249-6923 Y [1] SWIVEL GP-ELECTRIC  
8. 364-2786 [1] HARNESS AS-SOLENOID  
  8T-8729 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  155-2270 [4] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDE RECEPTACLE AS & WEDGE)
  104-6692 [2] RECEPTACLE AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  8T-8737 [2] PLUG-SEAL  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDE RECEPTACLE AS & WEDGE)
  8T-8730 [8] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  131-1497 [1] TERMINAL AS-RING (10-GA TO 12-GA)  
  2L-8068 [1] TERMINAL-RING (10-GA TO 12-GA, 5/16-IN SCREW)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(4-CM)  
9. 3F-9556 [1] LOCKWASHER  
10. 3S-2093 B [24] STRAP-CABLE  
11. 5C-7261 M [1] NUT (M8X1.25-THD)  
12. 155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
13. 155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDEG & INTERFACE SEAL)
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP68010204
 

242-5028: WIRING GP-UNDERCARRIAGE/SWIVEL

242-5028 WIRING GP-UNDERCARRIAGE/SWIVEL
S/N K3D1-UP
PART OF 354-7145, 397-1638 UNDERCARRIAGE AR
AN ATTACHMENT
i02174459 SEBP6801
2425028 WIRING GP-UNDERCARRIAGE/SWIVEL Parts scheme
  For full view, you need register

Parts for your M313D WHEELED EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
2. 199-6978 [1] ROD  
3. 237-0075 [1] HARNESS AS-SENSOR (TRAVEL SPEED)  
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  114-8843 E SLEEVE-PLASTIC (25-CM)  
  128-4178 [1] TERMINAL AS  
  2L-8068 [1] TERMINAL-RING (10-GA TO 12-GA, 5/16-IN SCREW)  
  5P-6006 L [1] TUBE-HEAT SHRINK (9.52-MM DIA)(10-DM)  
4. 377-1953 Y [1] SWIVEL GP-ELECTRIC  
5. 355-4378 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
6. 3F-9556 [2] LOCKWASHER  
7. 3S-2093 [5] STRAP-CABLE  
8. 5C-7261 M [1] NUT (M8X1.25-THD)  
9. 5C-9553 M [2] BOLT (M6X1X16-MM)  
10. 5P-4116 [1] WASHER-HARD (8.8X20.5X2-MM THK)  
  E   ORDER BY THE CENTIMETER
  L   ORDER BY THE DECIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP68010205
 

337-5784: WIRING GP-WORK TOOL

337-5784 WIRING GP-WORK TOOL -MULTIFUNCTION COMBINED VALVE
S/N K3D1-UP
PART OF 394-5060 VALVE & LINES AR, 392-9598 VALVE & LINES AR-AUXILIARY
AN ATTACHMENT
i04158493 SEBP6801
3375784 WIRING GP-WORK TOOL Parts scheme
  For full view, you need register

Parts for your M313D WHEELED EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 337-5785 [1] HARNESS AS-WORK TOOL  
  230-5011 [1] RECEPTACLE AS-CONNECTOR (6-PIN)  
  155-2270 [4] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  8T-8729 [6] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [8] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)  
2. 3S-2093 B [2] STRAP-CABLE  
3. 7K-1181 B [2] STRAP-CABLE  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
 

#SEBP68010206
 

241-7431: AXLE & MTG AR-FRONT

241-7431 AXLE & MTG AR-FRONT
S/N K3D1-UP
PART OF 250-3294 POWER TRAIN AR
ALSO AN ATTACHMENT
i03607127 SEBP6801
2417431 AXLE & MTG AR-FRONT Parts scheme
  For full view, you need register

Parts for your M313D WHEELED EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 9X-8257 [1] WASHER (17.5X30X3.5-MM THK)  
2. 5W-0965 [20] RING  
3. 303-9446 [20] LOCKWASHER  
4. 303-9445 M [20] NUT-HEX FLANGE (M22X1.5-THD)  
5. 110-2170 [1] PIN  
6. 388-7608 [2] PLATE AS  
7. 128-7901 [2] ELBOW AS  
    (EACH INCLUDES)
  6V-8398 [1] SEAL-O-RING  
  8T-7524 [1] SEAL-O-RING  
8. 331-1370 CY [1] AXLE GP-STEERING (FRONT)  
9. 243-0919 [2] FITTING  
10. 133-2717 B [1] SHIM (0.5-MM THK)  
11. 8T-4779 M [8] BOLT (M16X2X35-MM)  
12. 6V-6560 [2] SEAL-O-RING  
13. 7X-2475 M [1] BOLT (M16X2X130-MM)  
14. 176-5311 M [1] LOCKNUT (M16X2-THD)  
15. 093-0065 B [1] SHIM (1-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP68010207
 

241-7432: AXLE & MTG AR-REAR

241-7432 AXLE & MTG AR-REAR
S/N K3D1-UP
PART OF 250-3294 POWER TRAIN AR
ALSO AN ATTACHMENT
i03642584 SEBP6801
2417432 AXLE & MTG AR-REAR Parts scheme
  For full view, you need register

Parts for your M313D WHEELED EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 5W-0965 [20] RING  
2. 8T-4123 [16] WASHER (22X35X3.5-MM THK)  
3. 8U-5923 [2] FITTING AS  
4. 303-9446 [20] LOCKWASHER  
5. 303-9445 M [20] NUT-HEX FLANGE (M22X1.5-THD)  
6. 331-1375 CY [1] AXLE & TRANSMISSION AR  
7. 241-6199 [1] ELBOW AS  
  6V-8398 [1] SEAL-O-RING  
  8T-6850 [1] SEAL-O-RING  
  227-0061 [1] ELBOW  
8. 6V-6560 [2] SEAL-O-RING  
9. 6V-7688 M [8] LOCKNUT (M20X2.5-THD)  
10. 6V-8398 [3] SEAL-O-RING  
11. 8T-6850 [1] SEAL-O-RING  
12. 8T-7488 [1] CONNECTOR (O-RING)  
13. 4I-6766 M [8] BOLT (M20X2.5X230-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP68010208
 

331-1375: AXLE & TRANSMISSION AR

331-1375 AXLE & TRANSMISSION AR
S/N K3D1-260
PART OF 241-7432 AXLE & MTG AR-REAR
ALSO AN ATTACHMENT
i05347091 SEBP6801
3311375 AXLE & TRANSMISSION AR Parts scheme 3311375 AXLE & TRANSMISSION AR Parts scheme
  For full view, you need register

Parts for your M313D WHEELED EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 416-1917 CY [1] TRANSMISSION GP  
2. 333-8039 [2] HOUSING-AXLE  
3. 333-8040 [2] SHAFT-AXLE  
4. 233-8738 [1] HOUSING  
5. 054-6514 B [2] SHIM (0.1-MM THK)  
  121-7679 B [2] SHIM (0.15-MM THK)  
  054-6513 B [2] SHIM (0.2-MM THK)  
  121-7680 B [2] SHIM (0.25-MM THK)  
  054-6512 B [2] SHIM (0.3-MM THK)  
  128-7675 B [2] SHIM (0.35-MM THK)  
  7T-0564 B [2] SHIM (0.4-MM THK)  
  121-7677 B [2] SHIM (0.45-MM THK)  
  7T-0563 B [2] SHIM (0.5-MM THK)  
  121-7678 B [2] SHIM (0.55-MM THK)  
  7T-0562 B [2] SHIM (0.6-MM THK)  
  128-7676 B [2] SHIM (0.65-MM THK)  
  128-7677 B [2] SHIM (0.7-MM THK)  
  128-7680 B [2] SHIM (0.75-MM THK)  
  7T-0561 B [2] SHIM (0.8-MM THK)  
  128-7681 B [2] SHIM (0.85-MM THK)  
  128-7683 B [2] SHIM (0.9-MM THK)  
  128-7684 B [2] SHIM (0.95-MM THK)  
  7T-0560 B [2] SHIM (1-MM THK)  
  128-7685 B [2] SHIM (1.05-MM THK)  
  128-7686 B [2] SHIM (1.1-MM THK)  
  128-7687 B [2] SHIM (1.15-MM THK)  
  128-7688 B [2] SHIM (1.25-MM THK)  
  128-7689 B [2] SHIM (1.3-MM THK)  
  128-7690 B [2] SHIM (1.35-MM THK)  
  7T-0558 B [2] SHIM (1.4-MM THK)  
  128-7691 B [2] SHIM (1.45-MM THK)  
  128-7692 B [2] SHIM (1.5-MM THK)  
  128-7693 B [2] SHIM (1.55-MM THK)  
  128-7694 B [2] SHIM (1.6-MM THK)  
  128-7695 B [2] SHIM (1.65-MM THK)  
  7T-0552 B [2] SHIM (2-MM THK)  
  202-8137 B [2] SHIM (1.47-MM THK)  
  202-8138 B [2] SHIM (1.63-MM THK)  
  202-8139 B [2] SHIM (1.75-MM THK)  
  202-8140 B [2] SHIM (1.7-MM THK)  
  202-8141 B [2] SHIM (1.8-MM THK)  
  202-8142 B [2] SHIM (1.85-MM THK)  
  202-8143 B [2] SHIM (1.9-MM THK)  
  202-8144 B [2] SHIM (1.95-MM THK)  
45. 6Y-2942 [2] BEARING-TAPERED ROLLER  
46. 6Y-2943 [2] CUP-BEARING (TAPERED ROLLER)  
47. 8U-6079 [2] SEAL-O-RING  
48. 5W-5627 M [32] BOLT (M18X2.5X60-MM)  
49. 263-3629 [3] PLUG AS  
    (EACH INCLUDES)
49A. 203-0215 [1] SEAL-O-RING  
50. 203-0215 [1] SEAL-O-RING  
51. 263-3630 [1] PLUG AS-MAGNET (AXLE HOUSING)  
52. 8T-4183 M [4] BOLT (M12X1.75X40-MM)  
53. 6V-8149 M [10] NUT (M12X1.75-THD)  
54. 372-4120 [1] GEAR-CROWN  
55. 371-7328 [1] CASE-DIFFERENTIAL  
56. 331-1391 [1] COVER  
58. 331-1393 [2] WASHER-THRUST  
59. 416-2319 [2] GEAR-DIFFERENTIAL  
60. 331-1396 [4] GEAR-DIFFERENTIAL  
61. 331-1397 [4] WASHER-THRUST  
62. 331-1398 [1] SHAFT  
63. 331-1399 [2] SHAFT  
64. 204-3975 [2] PIN-SPRING  
65. 336-7377 M [16] BOLT-SOCKET HEAD (M12X1.5X35-MM)  
66. 270-3096 [2] HUB GP-WHEEL  
    (EACH INCLUDES)
66A. 268-8782 M [1] NUT-SPANNER (M30X1.5-THD)  
67. 5W-5682 [2] VALVE AS-PURGE (AXLE)  
68. 8T-4140 M [28] BOLT (M16X2X60-MM)  
69. 270-6871 [2] SEAL-O-RING  
70. 384-9873 [2] GEAR-SUN  
71. 130-6879 [2] SEAL  
72. 2S-0480 [2] CUP-TAPERED ROLLER  
73. 178-8608 [2] CONE-TAPERED  
74. 333-8038 [2] GEAR-CARRIER  
75. 7X-5762 [2] SEAL-O-RING  
76. 333-8028 [2] HUB-FLANGE  
77. 267-8985 [4] SEAL-O-RING  
78. 267-8984 [2] SEAL-O-RING  
79. 316-7898 [2] GEAR-INTERNAL  
80. 328-8803 [2] PISTON  
81. 263-4057 [6] DOWEL  
82. 121-7639 [2] RING  
83. 121-7637 [2] RING-BACKUP  
84. 267-9166 [2] SEAL  
85. 267-9167 [2] RING  
86. 8U-3592 [12] SPRING  
87. 238-3305 [12] SPRING  
88. 298-2315 [12] BOLT-SPECIAL  
89. 8U-3591 [12] SPACER (6.5X15X7-MM THK)  
90. 267-9168 [16] DISC-CLUTCH  
91. 267-9170 B [16] DISC-CLUTCH  
  267-9169 B [4] DISC-CLUTCH  
  267-9171 B [4] DISC-CLUTCH  
94. 375-1360 [2] WASHER-THRUST (10X40.2X5.1-MM THK)  
95. 375-8263 [2] CAGE-PINION  
96. 386-3822 [6] GEAR-PLANETARY  
98. 095-0924 [6] RING-RETAINING  
99. 6V-3668 M [4] BOLT (M12X1.75X30-MM)  
100. 243-5336 M [2] BOLT (M10X1.5X20-MM)  
101. 267-9161 [2] BEARING-TAPERED ROLLER  
102. 333-8037 [20] STUD-WHEEL  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP68010209
 

331-1375: AXLE & TRANSMISSION AR

331-1375 AXLE & TRANSMISSION AR
S/N K3D261-UP
PART OF 241-7432 AXLE & MTG AR-REAR
ALSO AN ATTACHMENT
i06871104 SEBP6801
3311375 AXLE & TRANSMISSION AR Parts scheme 3311375 AXLE & TRANSMISSION AR Parts scheme
  For full view, you need register

Parts for your M313D WHEELED EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 416-1917 Y [1] TRANSMISSION GP  
2. 333-8039 [2] HOUSING-AXLE  
3. 333-8040 [2] SHAFT-AXLE  
4. 233-8738 [1] HOUSING  
5. 054-6514 B [2] SHIM (0.1-MM THK)  
  121-7679 B [2] SHIM (0.15-MM THK)  
  054-6513 B [2] SHIM (0.2-MM THK)  
  121-7680 B [2] SHIM (0.25-MM THK)  
  054-6512 B [2] SHIM (0.3-MM THK)  
  128-7675 B [2] SHIM (0.35-MM THK)  
  7T-0564 B [2] SHIM (0.4-MM THK)  
  121-7677 B [2] SHIM (0.45-MM THK)  
  7T-0563 B [2] SHIM (0.5-MM THK)  
  121-7678 B [2] SHIM (0.55-MM THK)  
  7T-0562 B [2] SHIM (0.6-MM THK)  
  128-7676 B [2] SHIM (0.65-MM THK)  
  128-7677 B [2] SHIM (0.7-MM THK)  
  128-7680 B [2] SHIM (0.75-MM THK)  
  7T-0561 B [2] SHIM (0.8-MM THK)  
  128-7681 B [2] SHIM (0.85-MM THK)  
  128-7683 B [2] SHIM (0.9-MM THK)  
  128-7684 B [2] SHIM (0.95-MM THK)  
  7T-0560 B [2] SHIM (1-MM THK)  
  128-7685 B [2] SHIM (1.05-MM THK)  
  128-7686 B [2] SHIM (1.1-MM THK)  
  128-7687 B [2] SHIM (1.15-MM THK)  
  128-7688 B [2] SHIM (1.25-MM THK)  
  128-7689 B [2] SHIM (1.3-MM THK)  
  128-7690 B [2] SHIM (1.35-MM THK)  
  7T-0558 B [2] SHIM (1.4-MM THK)  
  128-7691 B [2] SHIM (1.45-MM THK)  
  128-7692 B [2] SHIM (1.5-MM THK)  
  128-7693 B [2] SHIM (1.55-MM THK)  
  128-7694 B [2] SHIM (1.6-MM THK)  
  128-7695 B [2] SHIM (1.65-MM THK)  
  7T-0552 B [2] SHIM (2-MM THK)  
  202-8137 B [2] SHIM (1.47-MM THK)  
  202-8138 B [2] SHIM (1.63-MM THK)  
  202-8139 B [2] SHIM (1.75-MM THK)  
  202-8140 B [2] SHIM (1.7-MM THK)  
  202-8141 B [2] SHIM (1.8-MM THK)  
  202-8142 B [2] SHIM (1.85-MM THK)  
  202-8143 B [2] SHIM (1.9-MM THK)  
  202-8144 B [2] SHIM (1.95-MM THK)  
45. 6Y-2942 [2] BEARING-TAPERED ROLLER  
46. 6Y-2943 [2] CUP-BEARING (TAPERED ROLLER)  
47. 8U-6079 [2] SEAL-O-RING  
48. 5W-5627 M [32] BOLT (M18X2.5X60-MM)  
49. 263-3629 [3] PLUG AS  
    (EACH INCLUDES)
49A. 203-0215 [1] SEAL-O-RING  
50. 203-0215 [1] SEAL-O-RING  
51. 263-3630 [1] PLUG AS-MAGNET (AXLE HOUSING)  
  203-0215 [1] SEAL-O-RING  
52. 8T-4183 M [4] BOLT (M12X1.75X40-MM)  
53. 6V-8149 M [10] NUT (M12X1.75-THD)  
54. 372-4120 [1] GEAR-CROWN  
55. 519-7018 C [1] CASE-DIFFERENTIAL  
56. 331-1391 [1] COVER  
58. 331-1393 [2] WASHER-THRUST  
59. 416-2319 [2] GEAR-DIFFERENTIAL  
60. 331-1396 [4] GEAR-DIFFERENTIAL  
61. 331-1397 [4] WASHER-THRUST  
62. 331-1398 [1] SHAFT  
63. 519-7019 C [2] SHAFT  
64. 2M-3521 C [2] PIN-SPRING  
65. 336-7377 M [16] BOLT-SOCKET HEAD (M12X1.5X35-MM)  
66. 270-3096 [2] HUB GP-WHEEL  
    (EACH INCLUDES)
66A. 268-8782 M [1] NUT-SPANNER (M30X1.5-THD)  
67. 5W-5682 [2] VALVE AS-PURGE (AXLE)  
68. 8T-4140 M [28] BOLT (M16X2X60-MM)  
69. 270-6871 [2] SEAL-O-RING  
70. 384-9873 [2] GEAR-SUN  
71. 130-6879 [2] SEAL  
72. 2S-0480 [2] CUP-TAPERED ROLLER  
73. 178-8608 [2] CONE-TAPERED  
74. 333-8038 [2] GEAR-CARRIER  
75. 7X-5762 [2] SEAL-O-RING  
76. 333-8028 [2] HUB-FLANGE  
77. 267-8985 [4] SEAL-O-RING  
78. 267-8984 [2] SEAL-O-RING  
79. 316-7898 [2] GEAR-INTERNAL  
80. 328-8803 [2] PISTON  
81. 263-4057 [6] DOWEL  
82. 121-7639 [2] RING  
83. 121-7637 [2] RING-BACKUP  
84. 267-9166 [2] SEAL  
85. 267-9167 [2] RING  
86. 8U-3592 [12] SPRING  
87. 238-3305 [12] SPRING  
88. 298-2315 [12] BOLT-SPECIAL  
89. 8U-3591 [12] SPACER (6.5X15X7-MM THK)  
90. 267-9168 [16] DISC-CLUTCH  
91. 267-9170 B [16] DISC-CLUTCH  
  267-9169 B [4] DISC-CLUTCH  
  267-9171 B [4] DISC-CLUTCH  
94. 375-1360 [2] WASHER-THRUST (10X40.2X5.1-MM THK)  
95. 375-8263 [2] CAGE-PINION  
96. 386-3822 [6] GEAR-PLANETARY  
98. 095-0924 [6] RING-RETAINING  
99. 6V-3668 M [4] BOLT (M12X1.75X30-MM)  
100. 243-5336 M [2] BOLT (M10X1.5X20-MM)  
101. 267-9161 [2] BEARING-TAPERED ROLLER  
102. 333-8037 [20] STUD-WHEEL  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Caterpillar Parts SIS Catalog M313D :

WIRING GP-MONITOR
337-5814 WIRING GP-MONITOR
WIRING GP-MIRROR
337-5800 WIRING GP-MIRROR
WIRING GP-MIRROR
273-4821 WIRING GP-MIRROR
WIRING GP-FAN
253-9849 WIRING GP-FAN
WIRING GP-ENGINE
299-5092 WIRING GP-ENGINE
WIRING GP-ELECTRONIC CONTROL
337-5786 WIRING GP-ELECTRONIC CONTROL
WIRING GP-DEF MODULE
360-8924 WIRING GP-DEF MODULE
WIRING GP-CONSOLE
377-1851 WIRING GP-CONSOLE
WIRING GP-SENSOR
360-8927 WIRING GP-SENSOR
WIRING GP-STABILIZER
337-5778 WIRING GP-STABILIZER
WIRING GP-STABILIZER
364-2785 WIRING GP-STABILIZER
WIRING GP-UNDERCARRIAGE/SWIVEL
242-5028 WIRING GP-UNDERCARRIAGE/SWIVEL
WIRING GP-WORK TOOL
337-5784 WIRING GP-WORK TOOL
AXLE & MTG AR-FRONT
241-7431 AXLE & MTG AR-FRONT
AXLE & MTG AR-REAR
241-7432 AXLE & MTG AR-REAR
AXLE & TRANSMISSION AR
331-1375 AXLE & TRANSMISSION AR

Truck sale:

Caterpillar M313D
 
Caterpillar M313D
- wheel excavator
MILTON CAT
Caterpillar M313D, wheel excavator, Construction
84,229 
Caterpillar M313D, wheel excavator, Construction
- wheel excavator
FINNING CANADA
Caterpillar M313D, wheel excavator, Construction
87,236 
Caterpillar M313D, wheel excavator, Construction
- wheel excavator
BERGERAT MONNOYEUR S.A.S.
Caterpillar M313D, wheel excavator, Construction
 
Caterpillar M313D, wheel excavator, Construction
- wheel excavator
CGT - COMPAGNIA GENERALE TRATTORI
Caterpillar M313D, wheel excavator, Construction
 
Caterpillar M313D, wheel excavator, Construction
- wheel excavator
CGT - COMPAGNIA GENERALE TRATTORI