BASIC ENGINE
VALVE MECHANISM GPCRANKSHAFT GP
CYLINDER BLOCK GP
CYLINDER HEAD GP
DAMPER GP
BASIC ENGINE
VALVE MECHANISM GP
#SEBP68060030
342-9154: COVER GP-VALVE MECHANISM
342-9154 COVER GP-VALVE MECHANISM
S/N TXW754-UP
PART OF 325-3918 COVER GP-VALVE MECHANISM
AN ATTACHMENT
S/N TXW754-UP
PART OF 325-3918 COVER GP-VALVE MECHANISM
AN ATTACHMENT
For full view, you need register
Parts for your 745C ARTICULATED TRUCK:
CATERPILLAR SIS#SEBP68060031
366-6114: CRANKSHAFT GP
For full view, you need register
Parts for your 745C ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 317-8766 J | [7] | BEARING-MAIN (STANDARD) | |
| 4W-5698 AB | BEARING-MAIN (0.63-MM US) | |||
| 4W-5699 AB | BEARING-MAIN (1.27-MM US) | |||
| 4W-5700 AB | BEARING-MAIN (0.63-MM OS) | |||
| 4W-5701 AB | BEARING-MAIN (0.63-MM OS, 0.63-MM US) | |||
| 2. | 468-5121 | [1] | CRANKSHAFT AS | |
| 2A. | 361-8229 | [1] | GEAR-CRANKSHAFT (66-TEETH) | |
| 4N-0684 | [1] | DOWEL | ||
| 7S-5005 | [1] | DOWEL | ||
| 3. | 253-1752 J | [2] | PLATE-THRUST | |
| 4. | 319-7401 Y | [1] | SEAL GP-CRANKSHAFT (FRONT) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 243-6718 AY | [1] | KIT-CRANKSHAFT BEARING | ||
| (INCLUDES A COMPLETE SET OF MAIN BEARING & THRUST PLATES) | ||||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP68060032
357-1320: CYLINDER BLOCK AS
357-1320 CYLINDER BLOCK AS
S/N TXW1-UP
PART OF 358-6883 CYLINDER BLOCK GP
AN ATTACHMENT
S/N TXW1-UP
PART OF 358-6883 CYLINDER BLOCK GP
AN ATTACHMENT
For full view, you need register
Parts for your 745C ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 155-0809 | [6] | SEAL-LINER | |
| 2. | 155-2793 | [12] | SEAL-LINER | |
| 3. | 357-1315 | [1] | CYLINDER BLOCK AS | |
| 3P-1323 | [14] | BOLT-BEARING CAP (7/8-14X7.75-IN) | ||
| 9H-1031 | [14] | WASHER-HARD (24X41.5X6-MM THK) | ||
| 167-8081 | [7] | CAP-CRANKSHAFT BEARING | ||
| 4. | 516-9693 | [6] | LINER-CYLINDER BLOCK | |
| 5. | 9L-5854 | [6] | BAND-FILLER (130.2-MM ID) |
#SEBP68060033
555-8793: CYLINDER BLOCK AS
555-8793 CYLINDER BLOCK AS
S/N TXW1-UP
PART OF 358-6883 CYLINDER BLOCK GP
AN ATTACHMENT
S/N TXW1-UP
PART OF 358-6883 CYLINDER BLOCK GP
AN ATTACHMENT
For full view, you need register
Parts for your 745C ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 155-0809 | [6] | SEAL-LINER | |
| 2. | 155-2793 | [12] | SEAL-LINER | |
| 3. | 488-1675 | [1] | CYLINDER BLOCK AS | |
| 3P-1323 | [14] | BOLT-BEARING CAP (7/8-14X7.75-IN) | ||
| 9H-1031 | [14] | WASHER-HARD (24X41.5X6-MM THK) | ||
| 167-8081 | [7] | CAP-CRANKSHAFT BEARING | ||
| 4. | 556-0701 | [6] | LINER-CYLINDER | |
| 5. | 9L-5854 | [6] | BAND-FILLER (130.2-MM ID) |
#SEBP68060034
358-6883: CYLINDER BLOCK GP
358-6883 CYLINDER BLOCK GP
S/N TXW1-UP
PART OF 453-1019 ENGINE AR-CORE
Type 1
AN ATTACHMENT
S/N TXW1-UP
PART OF 453-1019 ENGINE AR-CORE
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 745C ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1S-9540 | [1] | DOWEL | |
| 2. | 4N-1650 | [1] | DOWEL | |
| 3. | 6I-1055 | [1] | DOWEL | |
| 4. | 6I-4421 | [1] | PLATE-SPACER | |
| 5. | 142-2329 | [1] | SEAL | |
| 6. | 227-1204 | [1] | GASKET | |
| 7. | 4N-0683 | [4] | DOWEL | |
| 8. | 357-1320 Y | [1] | CYLINDER BLOCK AS | |
| 9. | 2M-6471 | [2] | PLUG-CUP | |
| 10. | 5P-0840 | [1] | SEAL-O-RING | |
| 101-0523 ABFN | INSERT-LINER SEAT (5.21-MM THK) | |||
| 101-0524 ABFN | INSERT-LINER SEAT (5.16-MM THK) | |||
| 101-0525 ABFN | INSERT-LINER SEAT (5.26-MM THK) | |||
| 9Y-3368 ABFN | INSERT-LINER SEAT (0.822-MM THK) | |||
| 6I-4361 ABFN | INSERT-LINER SEAT (0.772-MM THK) | |||
| 6I-4362 ABFN | INSERT-LINER SEAT (0.872-MM THK) | |||
| 2W-3815 ABFN | INSERT-LINER SEAT (1.605-MM THK) | |||
| 6I-4363 ABFN | INSERT-LINER SEAT (1.555-MM THK) | |||
| 6I-4364 ABFN | INSERT-LINER SEAT (1.655-MM THK) | |||
| 5N-0093 ABFN | INSERT-LINER SEAT (2.71-MM THK) | |||
| 6I-4365 ABFN | INSERT-LINER SEAT (2.66-MM THK) | |||
| 6I-4366 ABFN | INSERT-LINER SEAT (2.76-MM THK) | |||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| F | NOT SHOWN | |||
| N | FOR SALVAGE OF DAMAGED LIFTER BORES IN CYLINDER BLOCK REFER TO SEBF8076 IN SIS WEB | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP68060035
358-6883: CYLINDER BLOCK GP
358-6883 CYLINDER BLOCK GP
S/N TXW1-UP
PART OF 453-1019 ENGINE AR-CORE
Type 2
AN ATTACHMENT
S/N TXW1-UP
PART OF 453-1019 ENGINE AR-CORE
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 745C ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1S-9540 | [1] | DOWEL | |
| 2. | 4N-1650 | [1] | DOWEL | |
| 3. | 6I-1055 | [1] | DOWEL | |
| 4. | 6I-4421 | [1] | PLATE-SPACER | |
| 5. | 142-2329 | [1] | SEAL | |
| 6. | 227-1204 | [1] | GASKET | |
| 7. | 4N-0683 | [4] | DOWEL | |
| 8. | 555-8793 CY | [1] | CYLINDER BLOCK AS | |
| 9. | 2M-6471 | [2] | PLUG-CUP | |
| 10. | 5P-0840 | [1] | SEAL-O-RING | |
| 101-0523 ABFN | INSERT-LINER SEAT (5.21-MM THK) | |||
| 101-0524 ABFN | INSERT-LINER SEAT (5.16-MM THK) | |||
| 101-0525 ABFN | INSERT-LINER SEAT (5.26-MM THK) | |||
| 9Y-3368 ABFN | INSERT-LINER SEAT (0.822-MM THK) | |||
| 6I-4361 ABFN | INSERT-LINER SEAT (0.772-MM THK) | |||
| 6I-4362 ABFN | INSERT-LINER SEAT (0.872-MM THK) | |||
| 2W-3815 ABFN | INSERT-LINER SEAT (1.605-MM THK) | |||
| 6I-4363 ABFN | INSERT-LINER SEAT (1.555-MM THK) | |||
| 6I-4364 ABFN | INSERT-LINER SEAT (1.655-MM THK) | |||
| 5N-0093 ABFN | INSERT-LINER SEAT (2.71-MM THK) | |||
| 6I-4365 ABFN | INSERT-LINER SEAT (2.66-MM THK) | |||
| 6I-4366 ABFN | INSERT-LINER SEAT (2.76-MM THK) | |||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| F | NOT SHOWN | |||
| N | FOR SALVAGE OF DAMAGED LIFTER BORES IN CYLINDER BLOCK REFER TO SEBF8076 IN SIS WEB | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP68060036
281-1640: CYLINDER HEAD AS
281-1640 CYLINDER HEAD AS
S/N TXW1-UP
CONTAINS PRECISION PRE-MACHINED VALVE SEAT INSERTS
PART OF 432-5470 CYLINDER HEAD GP
AN ATTACHMENT
S/N TXW1-UP
CONTAINS PRECISION PRE-MACHINED VALVE SEAT INSERTS
PART OF 432-5470 CYLINDER HEAD GP
AN ATTACHMENT
For full view, you need register
Parts for your 745C ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 122-7375 | [24] | GUIDE-VALVE (STANDARD) | |
| 122-0447 AB | GUIDE-VALVE (0.51-MM OS) | |||
| 122-8612 AB | GUIDE-VALVE (0.13-MM OS) | |||
| 2. | 216-5582 | [7] | BUSHING (STANDARD) | |
| 217-0751 AB | BUSHING (0.25-MM OS) | |||
| 217-0752 AB | BUSHING (0.762-MM OS) | |||
| 261-3429 AB | BUSHING (1.778-MM OS) | |||
| 261-3430 AB | BUSHING (1.27-MM OS) | |||
| 3. | 300-3565 | [12] | INSERT-VALVE SEAT (EXHAUST)(STANDARD) | |
| 4. | 263-4920 | [6] | SLEEVE-INJECTOR (INLET) | |
| 6. | 280-3979 | [12] | INSERT-VALVE SEAT (INLET)(STANDARD) | |
| 288-4881 AB | INSERT-VALVE SEAT (INLET)(0.51-MM OS) | |||
| 288-4882 AB | INSERT-VALVE SEAT (0.76-MM OS, INLET) | |||
| 7. | 166-2904 | [12] | SEAL-O-RING | |
| 8. | 3B-0623 | [17] | PLUG-CUP | |
| 9. | 3B-0645 | [20] | PLUG-CUP (32.08-MM OD) | |
| 10. | 8T-6757 | [3] | PLUG-PIPE | |
| 11. | 9X-7430 | [6] | SEAL-O-RING | |
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
#SEBP68060037
432-5470: CYLINDER HEAD GP
432-5470 CYLINDER HEAD GP
S/N TXW1-UP
PART OF 432-5472 CYLINDER HEAD GP
AN ATTACHMENT
S/N TXW1-UP
PART OF 432-5472 CYLINDER HEAD GP
AN ATTACHMENT
For full view, you need register
Parts for your 745C ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2A-4429 | [48] | LOCK-RETAINER | |
| 2. | 6I-0928 | [24] | WASHER-SPECIAL | |
| 3. | 163-2478 | [24] | SEAL-VALVE STEM | |
| 4. | 490-7198 | [12] | VALVE-INLET | |
| 5. | 247-9908 | [24] | SPRING-VALVE | |
| 6. | 281-1640 Y | [1] | CYLINDER HEAD AS | |
| 7. | 464-4668 | [12] | VALVE-EXHAUST | |
| 8. | 186-2001 | [24] | ROTOCOIL AS | |
| 9. | 211-3122 | [24] | SPRING-VALVE | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP68060038
432-5472: CYLINDER HEAD GP
For full view, you need register
Parts for your 745C ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-6772 | [24] | SEAL (WATER) | |
| 2. | 6I-4025 | [16] | FASTENER GP-CYLINDER HEAD | |
| (EACH INCLUDES) | ||||
| 5H-1504 | [1] | WASHER-HARD (20X33.5X5-MM THK) | ||
| 124-1855 | [1] | BOLT-12 POINT HEAD (3/4-16X7.638-IN) | ||
| 3. | 106-5673 | [10] | FASTENER GP-CYLINDER HEAD | |
| (EACH INCLUDES) | ||||
| 5H-1504 | [1] | WASHER-HARD (20X33.5X5-MM THK) | ||
| 124-1854 | [1] | BOLT-12 POINT HEAD (3/4-16X8.5-IN) | ||
| 4. | 224-5122 | [1] | GASKET (CYLINDER HEAD) | |
| 5. | 281-8261 | [6] | SLEEVE AS-EXHAUST | |
| 6. | 432-5470 Y | [1] | CYLINDER HEAD GP | |
| 7. | 183-3407 | [3] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 9S-8004 | [1] | PLUG (9/16-18-THD) | ||
| 214-7568 | [1] | SEAL-O-RING | ||
| 8. | 5P-0840 | [1] | SEAL-O-RING | |
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP68060039
227-3705: DAMPER GP
For full view, you need register
Parts for your 745C ARTICULATED TRUCK:
CATERPILLAR SISInformation:
BASIC ENGINE
VALVE MECHANISM GP
Engine News
Cat<SUP>®</SUP> Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Engines {1123}
Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Engines {1123}
Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Engines {1123}
Operation and Maintenance Manual
Specifications
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Testing and Adjusting
Troubleshooting
Disassembly and Assembly
Service Magazine
Cat<SUP>®</SUP> Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Machine Engines {1123}
Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Machine Engines {1123}
Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Machine Engines {1123}
