FUEL SYSTEM
LINES GP-FUEL INJECTIONPUMP GP-FUEL TRANSFER
PUMP GP-FUEL INJECTION
PUMP GP-FUEL TRANSFER
PUMP GP-FUEL INJECTION
TANK GP-FUEL
FUEL SYSTEM
LINES GP-FUEL INJECTION
#SEBP68090150
360-9061: LINES GP-FUEL INJECTION
360-9061 LINES GP-FUEL INJECTION -INJECTORS 1 & 3
S/N W7N1-UP
PART OF 361-2883 RAIL GP-FUEL
AN ATTACHMENT
S/N W7N1-UP
PART OF 361-2883 RAIL GP-FUEL
AN ATTACHMENT
For full view, you need register
Parts for your 444F2 BACKHOE LOADER:
CATERPILLAR SIS#SEBP68090151
360-9062: LINES GP-FUEL INJECTION
360-9062 LINES GP-FUEL INJECTION -INJECTORS 2 & 4
S/N W7N1-UP
PART OF 361-2883 RAIL GP-FUEL
AN ATTACHMENT
S/N W7N1-UP
PART OF 361-2883 RAIL GP-FUEL
AN ATTACHMENT
For full view, you need register
Parts for your 444F2 BACKHOE LOADER:
CATERPILLAR SIS#SEBP68090152
374-4343: PUMP & MTG GP-FUEL TRANSFER
374-4343 PUMP & MTG GP-FUEL TRANSFER
S/N W7N1-UP
12 VOLT. ELP
PART OF 436-5177 ENGINE AR-PRIMARY
AN ATTACHMENT
S/N W7N1-UP
12 VOLT. ELP
PART OF 436-5177 ENGINE AR-PRIMARY
AN ATTACHMENT
For full view, you need register
Parts for your 444F2 BACKHOE LOADER:
CATERPILLAR SIS#SEBP68090153
419-0677: PUMP GP-FUEL INJECTION
419-0677 PUMP GP-FUEL INJECTION
S/N W7N1-UP
12-VOLT
PART OF 436-5177 ENGINE AR-PRIMARY
AN ATTACHMENT
S/N W7N1-UP
12-VOLT
PART OF 436-5177 ENGINE AR-PRIMARY
AN ATTACHMENT
For full view, you need register
Parts for your 444F2 BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5W-1437 | [2] | LOCKWASHER | |
| 2. | 100-3752 | [2] | STUD (M8X1.25X30-MM) | |
| 3. | 111-3422 M | [1] | NUT (M14X1.5-THD) | |
| 4. | 185-7149 | [4] | BOLT | |
| 5. | 277-4223 | [1] | PLUG | |
| 6. | 328-7837 | [1] | GEAR (36-TEETH) | |
| 7. | 330-3036 | [1] | GASKET | |
| 8. | 331-6841 M | [2] | BOLT (M8X1.25X30-MM) | |
| 9. | 347-2165 | [1] | PLATE-ADAPTER | |
| 10. | 370-8363 | [1] | PUMP AS | |
| 10A. | 337-3905 | [1] | SENSOR-TEMPERATURE (FUEL TEMPERATURE) | |
| 10B. | 358-2583 | [1] | VALVE (12-VOLT) | |
| 11. | 420-1641 | [1] | LINE AS-FUEL | |
| 12. | 178-3336 M | [2] | NUT-HEX FLANGE (M8X1.25-THD) | |
| 13. | 6I-0645 M | [2] | BOLT (M8X1.25X25-MM) | |
| 14. | 6I-4072 M | [2] | BOLT (M8X1.25X14-MM) | |
| 15. | 111-3423 | [1] | WASHER | |
| 16. | 6V-8676 | [1] | SEAL-O-RING | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP68090154
446-5393: PUMP GP-FUEL TRANSFER
446-5393 PUMP GP-FUEL TRANSFER
S/N W7N1-UP
PART OF 374-4343 PUMP & MTG GP-FUEL TRANSFER
Type 1
AN ATTACHMENT
S/N W7N1-UP
PART OF 374-4343 PUMP & MTG GP-FUEL TRANSFER
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 444F2 BACKHOE LOADER:
CATERPILLAR SIS#SEBP68090155
446-5393: PUMP GP-FUEL TRANSFER
446-5393 PUMP GP-FUEL TRANSFER
S/N W7N1-UP
PART OF 374-4343 PUMP & MTG GP-FUEL TRANSFER
Type 2
AN ATTACHMENT
S/N W7N1-UP
PART OF 374-4343 PUMP & MTG GP-FUEL TRANSFER
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 444F2 BACKHOE LOADER:
CATERPILLAR SIS#SEBP68090156
361-2883: RAIL GP-FUEL
361-2883 RAIL GP-FUEL
S/N W7N1-UP
PART OF 436-5177 ENGINE AR-PRIMARY
Type 1
AN ATTACHMENT
S/N W7N1-UP
PART OF 436-5177 ENGINE AR-PRIMARY
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 444F2 BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6I-0917 M | [2] | BOLT (M6X1X25-MM) | |
| 2. | 101-7178 M | [2] | BOLT (M10X1.5X55-MM) | |
| 3. | 345-4153 | [1] | RAIL GP-FUEL | |
| 3A. | 334-7232 | [1] | VALVE | |
| 4. | 360-9061 Y | [1] | LINES GP-FUEL INJECTION (INJECTORS 1 & 3) | |
| 5. | 360-9062 Y | [1] | LINES GP-FUEL INJECTION (INJECTORS 2 & 4) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP68090157
361-2883: RAIL GP-FUEL
361-2883 RAIL GP-FUEL
S/N W7N1-UP
PART OF 436-5177 ENGINE AR-PRIMARY
Type 2
AN ATTACHMENT
S/N W7N1-UP
PART OF 436-5177 ENGINE AR-PRIMARY
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 444F2 BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6I-0917 M | [2] | BOLT (M6X1X25-MM) | |
| 2. | 101-7178 M | [2] | BOLT (M10X1.5X55-MM) | |
| 3. | 345-4153 | [1] | RAIL GP-FUEL | |
| 3A. | 334-7232 | [1] | VALVE | |
| 4. | 360-9061 Y | [1] | LINES GP-FUEL INJECTION (INJECTORS 1 & 3) | |
| 5. | 519-3671 C | [1] | LINES GP-FUEL (INJECTORS 2 & 4) | |
| 5A. | 360-9028 | [1] | LINE AS-FUEL | |
| 5B. | 360-9034 | [1] | CLIP-PIPE | |
| 5C. | 519-3663 | [1] | LINE AS-FUEL | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP68090158
419-4212: TANK GP-FUEL
419-4212 TANK GP-FUEL
S/N HWS1-UP
166-LITER(43.85-GALLON)
PART OF 430-7964 TANK GP-FUEL
AN ATTACHMENT
S/N HWS1-UP
166-LITER(43.85-GALLON)
PART OF 430-7964 TANK GP-FUEL
AN ATTACHMENT
For full view, you need register
Parts for your 444F2 BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 284-9039 | [1] | CAP-FUEL (VENTED) | |
| 2. | 198-9706 M | [6] | SCREW-TRUSS HEAD (M5X0.8X16-MM) | |
| 3. | 483-1538 | [1] | TANK AS-FUEL | |
| 385-5360 | [1] | ADAPTER-FUEL CAP | ||
| 4. | 424-6726 | [1] | PLUG AS | |
| 190-7634 | [1] | SEAL-O-RING | ||
| 5. | 457-3646 | [1] | SENDER AS-FUEL LEVEL (TANK) | |
| 8T-8729 | [1] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 310-4589 | [1] | GASKET | ||
| 467-0649 | [1] | STRAINER (FUEL TANK) | ||
| M | METRIC PART | |||
#SEBP68090159
430-7964: TANK GP-FUEL
430-7964 TANK GP-FUEL
S/N HWS1-UP
166-LITER (43.9-US GAL)
PART OF 450-8759, 450-8760 ENGINE AR-COMPLETE
AN ATTACHMENT
S/N HWS1-UP
166-LITER (43.9-US GAL)
PART OF 450-8759, 450-8760 ENGINE AR-COMPLETE
AN ATTACHMENT
For full view, you need register
Parts for your 444F2 BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 193-5918 | [2] | PLUG | |
| 2. | 349-7901 | [6] | SPACER (9X20X15-MM THK) | |
| 3. | 363-8348 | [2] | MOUNT | |
| 4. | 364-2475 | [2] | SEAL-STRIP | |
| 5. | 371-6659 | [1] | SEAL-CENTER | |
| 7. | 398-4230 | [3] | PLATE | |
| 8. | 399-6521 | [2] | STEP | |
| 9. | 419-4204 | [1] | BOX AS-FUEL | |
| 10. | 419-4212 Y | [1] | TANK GP-FUEL | |
| 11. | 433-2344 | [2] | BELT (TANK) | |
| 12. | 442-7740 | [1] | PLATE AS | |
| 13. | 450-9507 | [1] | GUARD | |
| 14. | 451-6794 | [1] | SEAL | |
| 15. | 468-7295 Y | [1] | TANK GP-DIESEL EXHAUST FLUID | |
| 16. | 456-7847 | [2] | STRAP AS | |
| 17. | 461-4630 | [1] | CLAMP AS | |
| 18. | 461-4632 | [1] | TREAD AS | |
| 159-9540 M | [2] | NUT-WELD (M8X1.25-THD) | ||
| 19. | 461-4633 | [1] | PLATE AS | |
| 20. | 099-3649 M | [6] | BOLT (M8X1.25X40-MM) | |
| 21. | 198-3899 M | [1] | SCREW-BUTTON HEAD (M8X1.25X20-MM) | |
| 22. | 344-5674 M | [8] | NUT (M8X1.25-THD) | |
| 23. | 5P-4116 | [29] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 24. | 8T-4189 M | [15] | BOLT (M8X1.25X20-MM) | |
| 25. | 8T-4193 M | [4] | BOLT (M16X2X50-MM) | |
| 26. | 8T-4908 M | [5] | BOLT (M8X1.25X25-MM) | |
| 27. | 9X-2044 M | [4] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 28. | 9X-8257 | [4] | WASHER (17.5X30X3.5-MM THK) | |
| 29. | 423-1982 G | HOSE (16.3-IN) | ||
| 30. | 6V-2495 D | SEAL (0.31-M EACH) | ||
| 31. | 3E-8299 E | SEAL (18.6-CM) | ||
| 31A. | 3E-8299 E | SEAL (14.5-CM) | ||
| 32. | 430-3036 | [1] | FILM-INSTRUCTION (DIESEL EXHAUST FLUID) | |
| 33. | 551-6925 | [1] | FILM-IDENTIFICATION (DEF DRAIN) | |
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| G | ORDER BY THE INCH | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
FUEL SYSTEM
LINES GP-FUEL INJECTION
Technical Information Bulletin
Electronic Unit Injectors on Certain C4.4 Machine Engines {1251, 1254, 1290}
Electronic Unit Injectors on Certain C4.4 Machine Engines {1251, 1254, 1290}
Electronic Unit Injectors on Certain C4.4 Machine Engines {1251, 1254, 1290}
Specifications
Systems Operation
Fuel Injection - Engines with a Primary and Secondary Fuel Filter Base
C4.4 Engines for Caterpillar Built Machines
C4.4 Engines for Caterpillar Built Machines
Disassembly and Assembly
Service Magazine
