AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

353-1386 CONTROL GP-HYDRAULIC HAND -BACKHOE PATTERN S/N FLY1-UP PART OF 387-6448 CONTROL GP-HYDRAULIC HAND Type 1 AN ATTACHMENT 434F


OPERATOR STATION
CONTROL GP-HYDRAULIC
CONTROL GP-HYDRAULIC LOCKOUT
CONTROL GP-HYDRAULIC
CONTROL GP-STABILIZER
CONTROL GP-STEERING
CONTROL GP-TRANSMISSION

BACKHOE LOADER 434F BACKHOE LOADER FLY
 434F Backhoe Loader FLY00001-UP (MACHINE) POWERED BY C4.4 Engine SEBP6814 434F FLY   (2012)

OPERATOR STATION

CONTROL GP-HYDRAULIC
CONTROL GP-HYDRAULIC HAND
331-9945 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
334-3569 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
353-1386 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
353-1386 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
353-1387 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
387-6448 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC PEDAL
353-1388 CONTROL GP-HYDRAULIC PEDAL
 

#SEBP68140600
 

353-1386: CONTROL GP-HYDRAULIC HAND

353-1386 CONTROL GP-HYDRAULIC HAND -BACKHOE PATTERN
S/N FLY1-UP
PART OF 387-6448 CONTROL GP-HYDRAULIC HAND
Type 1
AN ATTACHMENT
i04611531 SEBP6814
3531386 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 434F BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4773 [6] BALL JOINT  
2. 8T-6431 [4] ROD END  
3. 9R-9901 [6] FASTENER (CLIP)  
4. 164-1361 [2] BOOT  
5. 164-1371 [2] PLATE  
6. 164-1399 [2] KNOB  
7. 190-5134 [2] FILM-IDENTIFICATION (STD CROSS PATTERN)  
8. 206-1672 [1] CONSOLE (REAR)  
9. 206-1673 [1] CONSOLE AS (REAR)  
  172-8591 M [2] NUT-CLIP (M6X1-THD)  
11. 338-3578 [2] ROD  
12. 343-4847 [1] LEVER AS (RH)  
13. 343-4848 [1] LEVER AS (LH)  
14. 344-5863 [1] SPACER (20X35X6-MM THK)  
15. 366-5045 [1] SUPPORT AS  
16. 366-5052 [1] ROD  
17. 366-5290 [1] TOWER AS  
18. 366-5453 [1] BRACKET AS (LH)  
19. 366-5461 [1] ROD  
20. 366-5618 [1] ROD  
21. 366-5620 [1] MAT  
22. 371-4326 [1] BRACKET AS (RH)  
23. 384-2809 [1] SHAFT AS  
24. 6V-7744 M [6] LOCKNUT (M10X1.5-THD)  
25. 8T-0706 [1] RING-RETAINING  
26. 8T-4121 [15] WASHER-HARD (11X21X2.5-MM THK)  
27. 8T-4133 M [12] NUT (M10X1.5-THD)  
28. 8T-4195 M [7] BOLT (M10X1.5X30-MM)  
29. 398-8245 [4] PIN  
30. 8T-4224 [6] WASHER-HARD (8.8X16X2-MM THK)  
31. 8T-4908 M [6] BOLT (M8X1.25X25-MM)  
32. 9X-2038 [4] WASHER (7X19X2-MM THK)  
33. 9X-2045 M [6] SCREW-TRUSS HEAD (M6X1X20-MM)  
34. 399-2810 [4] CLIP  
  M   METRIC PART
 

#SEBP68140601
 

353-1386: CONTROL GP-HYDRAULIC HAND

353-1386 CONTROL GP-HYDRAULIC HAND -BACKHOE PATTERN
S/N FLY1-UP
PART OF 387-6448 CONTROL GP-HYDRAULIC HAND
Type 2
AN ATTACHMENT
i06089594 SEBP6814
3531386 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 434F BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4773 [6] BALL JOINT  
2. 8T-6431 [4] ROD END  
3. 9R-9901 [6] FASTENER (CLIP)  
4. 164-1361 [2] BOOT  
5. 164-1371 [2] PLATE  
6. 164-1399 [2] KNOB  
7. 190-5134 [2] FILM-IDENTIFICATION (STD CROSS PATTERN)  
8. 206-1672 [1] CONSOLE (REAR)  
9. 206-1673 [1] CONSOLE AS (REAR)  
  172-8591 M [2] NUT-CLIP (M6X1-THD)  
11. 338-3578 [2] ROD  
12. 343-4847 [1] LEVER AS (RH)  
13. 343-4848 [1] LEVER AS (LH)  
14. 344-5863 [1] SPACER (20X35X6-MM THK)  
15. 366-5045 [1] SUPPORT AS  
16. 366-5052 [1] ROD  
17. 366-5290 [1] TOWER AS  
  159-9541 M [2] NUT-WELD (M10X1.5-THD)  
18. 458-2386 C [1] BRACKET AS (LH)  
19. 366-5461 [1] ROD  
20. 366-5618 [1] ROD  
21. 366-5620 [1] MAT  
22. 458-2387 C [1] BRACKET AS (RH)  
23. 384-2809 [1] SHAFT AS  
24. 6V-7744 M [6] LOCKNUT (M10X1.5-THD)  
25. 8T-0706 [1] RING-RETAINING  
26. 8T-4121 [15] WASHER-HARD (11X21X2.5-MM THK)  
27. 8T-4133 M [12] NUT (M10X1.5-THD)  
28. 8T-4195 CM [5] BOLT (M10X1.5X30-MM)  
29. 398-8245 [4] PIN  
30. 8T-4224 [6] WASHER-HARD (8.8X16X2-MM THK)  
31. 8T-4908 CM [4] BOLT (M8X1.25X25-MM)  
32. 9X-2038 [4] WASHER (7X19X2-MM THK)  
33. 9X-2045 M [6] SCREW-TRUSS HEAD (M6X1X20-MM)  
34. 399-2810 [4] CLIP  
35. 8T-4189 CM [2] BOLT (M8X1.25X20-MM)  
36. 8T-4137 CM [2] BOLT (M10X1.5X20-MM)  
37. [1] FILM-WARNING (CONTROL PATTERN, READ OMM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP68140602
 

353-1387: CONTROL GP-HYDRAULIC HAND

353-1387 CONTROL GP-HYDRAULIC HAND -EXCAVATOR PATTERN
S/N FLY1-UP
PART OF 387-6449 KIT-CONTROL VALVE
AN ATTACHMENT
i04608873 SEBP6814
3531387 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 434F BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4773 [8] BALL JOINT  
2. 9R-9901 [6] FASTENER (CLIP)  
3. 142-7405 [2] COLLAR  
4. 164-1361 [2] BOOT  
5. 164-1371 [2] PLATE  
6. 164-1399 [2] KNOB  
7. 164-1421 [1] PLATE  
8. 164-1422 [1] SHAFT AS  
9. 164-1425 [1] COUPLER AS  
9A. 164-1415 [2] BEARING  
10. 164-1435 [2] PLATE  
11. 164-1438 [2] ROD  
12. 170-6312 [4] BEARING  
13. 190-5128 [1] FILM-INSTRUCTION (EXCAVATOR CONTROL)  
14. 206-1672 [1] CONSOLE (REAR)  
15. 206-1673 [1] CONSOLE AS (REAR)  
  172-8591 M [2] NUT-CLIP (M6X1-THD)  
16. 231-2873 [1] LEVER AS (LH)  
16A. 164-1436 [1] BEARING  
17. 337-6245 [1] ROD  
18. 337-6246 [2] ROD  
19. 337-6247 [1] ROD  
20. 366-5054 [1] LEVER AS (RH)  
20A. 164-1436 [1] BEARING  
21. 366-5055 [1] COUPLER AS  
21A. 164-1415 [2] BEARING  
22. 366-5287 [1] TOWER AS  
23. 366-5619 [1] MAT  
24. 164-1402 [2] SLEEVE  
25. 164-1404 [2] SPACER (10.67X16.95X23-MM THK)  
26. 6V-7744 M [12] LOCKNUT (M10X1.5-THD)  
27. 6V-8932 M [2] SETSCREW-SOCKET (M6X1X10-MM)  
28. 7X-7729 [8] WASHER (11X25X3-MM THK)  
29. 8T-4121 [21] WASHER-HARD (11X21X2.5-MM THK)  
30. 8T-4133 M [16] NUT (M10X1.5-THD)  
31. 8T-4138 M [6] BOLT (M6X1X20-MM)  
32. 8T-4172 M [2] BOLT (M10X1.5X80-MM)  
33. 8T-4195 M [7] BOLT (M10X1.5X30-MM)  
34. 8T-4743 [4] PIN  
35. 8T-4815 [4] ROD END  
36. 8T-6466 M [2] BOLT (M10X1.5X60-MM)  
37. 9X-2038 [4] WASHER (7X19X2-MM THK)  
38. 9X-2045 M [6] SCREW-TRUSS HEAD (M6X1X20-MM)  
39. 9X-8256 [6] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
 

#SEBP68140603
 

387-6448: CONTROL GP-HYDRAULIC HAND

387-6448 CONTROL GP-HYDRAULIC HAND -BACKHOE
S/N FLY1-UP
AN ATTACHMENT
i04990670 SEBP6814
3876448 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 434F BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 353-1386 Y [1] CONTROL GP-HYDRAULIC HAND (BACKHOE PATTERN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP68140604
 

231-2879: CONTROL GP-HYDRAULIC LOCKOUT

231-2879 CONTROL GP-HYDRAULIC LOCKOUT -PEDAL, BACKHOE
S/N FLY1-UP
PART OF 341-3108 CONVERSION AR-ROADING
AN ATTACHMENT
i03371829 SEBP6814
2312879 CONTROL GP-HYDRAULIC LOCKOUT Parts scheme
  For full view, you need register

Parts for your 434F BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 184-5382 [1] PIN  
2. 179-8235 [1] LOCK PIN  
 

#SEBP68140605
 

332-4254: CONTROL GP-HYDRAULIC LOCKOUT

332-4254 CONTROL GP-HYDRAULIC LOCKOUT -HAND THROTTLE
S/N FLY1-UP
PART OF 341-3108 CONVERSION AR-ROADING
AN ATTACHMENT
i03860355 SEBP6814
3324254 CONTROL GP-HYDRAULIC LOCKOUT Parts scheme
  For full view, you need register

Parts for your 434F BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 183-6438 [2] SPACER (10.5X20X14-MM THK)  
2. 297-1330 [1] PIN  
3. 330-6992 [1] BLOCK  
4. 346-5063 [1] PIN  
5. 352-9742 [2] BLOCK  
6. 5C-7261 M [2] NUT (M8X1.25-THD)  
7. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
8. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
9. 8T-4197 M [2] BOLT (M8X1.25X40-MM)  
10. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
  M   METRIC PART
 

#SEBP68140606
 

353-1388: CONTROL GP-HYDRAULIC PEDAL

353-1388 CONTROL GP-HYDRAULIC PEDAL -AUXILIARY, EXTENDABLE STICK
S/N FLY1-UP
PART OF 340-1733, 340-1734 BACKHOE AR-EXTENDABLE STICK, 432-7419 KIT-AUXILIARY LINES, 364-3388 LINES GP-BACKHOE AUXILIARY
AN ATTACHMENT
i04555836 SEBP6814
3531388 CONTROL GP-HYDRAULIC PEDAL Parts scheme
  For full view, you need register

Parts for your 434F BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4773 [2] BALL JOINT  
2. 8T-6431 [2] ROD END  
3. 133-8916 B [1] FILM-INSTRUCTION (EXTENDABLE STICK)  
4. 198-0098 B [1] FILM-INSTRUCTION (AUXILIARY)  
5. 398-8245 [1] PIN  
6. 231-2875 [1] SUPPORT AS (RH)  
7. 231-2876 [1] PEDAL AS (RH)  
8. 232-1540 [1] SEAL  
9. 353-3433 [1] SHAFT AS  
10. 366-5457 [1] PLATE AS  
11. 366-5460 [1] ROD  
12. 366-5461 [1] ROD  
13. 389-2016 [1] PLATE AS  
14. 036-4453 [2] RING-RETAINING  
15. 6V-7744 M [3] LOCKNUT (M10X1.5-THD)  
16. 161-7632 M [1] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
17. 8M-3175 [1] WASHER-HARD (10.2X16X3-MM THK)  
18. 8T-4121 [10] WASHER-HARD (11X21X2.5-MM THK)  
19. 8T-4133 M [6] NUT (M10X1.5-THD)  
20. 8T-4186 M [1] BOLT (M10X1.5X40-MM)  
21. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
22. 399-2810 [1] CLIP  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP68140607
 

374-6870: CONTROL GP-STABILIZER

374-6870 CONTROL GP-STABILIZER -WITH ALARM
S/N FLY1-UP
PART OF 374-6853, 374-6855 CAB AR
AN ATTACHMENT
i04611765 SEBP6814
3746870 CONTROL GP-STABILIZER Parts scheme
  For full view, you need register

Parts for your 434F BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9R-8165 [1] BEARING  
2. 164-1395 [1] KNOB (GOVERNOR CONTROL)  
3. 183-6084 [1] BEARING  
4. 206-1874 [1] LEVER AS  
5. 229-5745 [1] SPACER (8X15.875X11.6-MM THK)  
6. 232-1542 [1] SEAL  
7. 248-2708 [1] GROMMET  
8. 248-2710 [1] GROMMET  
9. 251-5627 [1] FILM-INSTRUCTION (STABILIZER, SIDESHIFT)  
10. 344-6334 [2] PIN  
11. 356-4094 [1] PLATE AS  
12. 357-9887 [2] SPACER  
13. 357-9951 [2] LEVER AS-CONTROL  
    (EACH INCLUDES)
  228-4592 [1] KNOB  
  228-4593 [1] BOOT-PROTECTION  
  228-4595 [1] SWITCH AS (STABILIZER UP ALARM)  
  357-9950 [1] CABLE AS (STABILIZER)  
14. 5P-4116 [6] WASHER-HARD (8.8X20.5X2-MM THK)  
15. 6E-5431 B [1] SHIM (0.5-MM THK)  
16. 7X-0465 M [3] BOLT (M6X1X100-MM)  
17. 8T-4138 M [1] BOLT (M6X1X20-MM)  
18. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
19. 8T-6902 [1] CLIP  
20. 8T-7547 M [1] BOLT (M8X1.25X30-MM)  
21. 9X-2045 M [4] SCREW-TRUSS HEAD (M6X1X20-MM)  
22. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP68140608
 

356-4120: CONTROL GP-STEERING

356-4120 CONTROL GP-STEERING -TILT
S/N FLY1-UP
PART OF 353-1429 CAB AR
AN ATTACHMENT
i04565291 SEBP6814
3564120 CONTROL GP-STEERING Parts scheme
  For full view, you need register

Parts for your 434F BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8R-2916 [1] COVER AS (CAT STEERING WHEEL)  
2. 255-2749 [1] PLUG  
3. 310-6216 Y [1] STEERING COLUMN GP  
4. 317-5541 [1] STEERING WHEEL  
5. 325-9308 [1] KNOB AS  
6. 356-4121 [1] PLATE AS  
7. 7X-7729 [6] WASHER (11X25X3-MM THK)  
8. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
9. 8T-4133 M [2] NUT (M10X1.5-THD)  
10. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
11. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
12. 101-7401 M [1] BOLT-SOCKET HEAD (M10X1.5X20-MM)  
13. 363-9061 [1] BOOT  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP68140609
 

341-6687: CONTROL GP-TRANSMISSION

341-6687 CONTROL GP-TRANSMISSION
S/N FLY1-UP
PART OF 353-1514 TRANSMISSION AR-DIRECT DRIVE
AN ATTACHMENT
i04606570 SEBP6814
3416687 CONTROL GP-TRANSMISSION Parts scheme
  For full view, you need register

Parts for your 434F BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-9501 [2] SCREW (10-16X0.75-IN)  
2. 3S-2093 [1] STRAP-CABLE  
3. 9R-1766 [1] COVER-BOTTOM  
4. 9R-1767 [1] BOOT  
5. 107-5591 [1] NUT-JAM (3/4-16-THD)  
6. 164-1153 [1] KNOB (UPPER)  
7. 164-1368 [8] FASTENER (CLIP)  
8. 206-1669 [1] BOOT  
9. 220-3470 [1] BOOT-SEAL  
10. 230-2389 [1] PLATE  
11. 230-2390 [1] PLATE  
12. 263-7261 [1] SWITCH GP-PUSH BUTTON (NEUTRALIZER)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  9W-0625 [1] SWITCH AS-PUSH BUTTON  
  6V-2689 D TUBE-HEAT SHRINK (6.35-MM DIA)(1.3-M)  
13. 310-9356 [1] CONTROL GP-TRANSMISSION (SHUTTLE)  
  151-9275 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
14. 356-4074 [1] ROD AS  
15. 105-3480 M [2] BOLT-SOCKET HEAD (M5X0.8X16-MM)  
16. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
17. 7X-0620 [1] WASHER-HARD (5.5X13X1.6-MM THK)  
18. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
19. 8T-4956 M [1] BOLT (M12X1.75X35-MM)  
  D   ORDER BY THE METER
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog 434F :

CONTROL GP-HYDRAULIC HAND
334-3569 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
331-9945 CONTROL GP-HYDRAULIC HAND
CONSOLE GP-OPERATOR
341-6677 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
317-5539 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
206-1702 CONSOLE GP-OPERATOR
CONDENSER & MTG GP-REFRIGERANT
337-9765 CONDENSER & MTG GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
395-2123 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
321-7038 COMPRESSOR GP-REFRIGERANT
CONTROL GP-HYDRAULIC HAND
353-1386 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
353-1387 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
387-6448 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC LOCKOUT
231-2879 CONTROL GP-HYDRAULIC LOCKOUT
CONTROL GP-HYDRAULIC LOCKOUT
332-4254 CONTROL GP-HYDRAULIC LOCKOUT
CONTROL GP-HYDRAULIC PEDAL
353-1388 CONTROL GP-HYDRAULIC PEDAL
CONTROL GP-STABILIZER
374-6870 CONTROL GP-STABILIZER
CONTROL GP-STEERING
356-4120 CONTROL GP-STEERING
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.