ELECTRICAL AND STARTING SYSTEM
HARNESS GPELECTRICAL AND STARTING SYSTEM
HARNESS GP
#SEBP68160310
418-2030: HARNESS AS-ENGINE
For full view, you need register
Parts for your 730C EJECTOR TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| 190-7614 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-3401 | [27] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [27] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 264-2407 | [6] | PLUG AS-CONNECTOR | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 113-4630 | [1] | RECEPTACLE AS-CONNECTOR (4-PIN) | ||
| 291-9858 | [24] | WIRE AS | ||
| 329-3734 B | TAPE-ELECTRICAL | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(196-CM) | |||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP68160311
428-7382: HARNESS AS-ENGINE
For full view, you need register
Parts for your 730C EJECTOR TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2256 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 174-0503 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-3401 | [20] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [20] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 325-8700 | [1] | PLUG AS | ||
| 8T-8737 | [12] | PLUG-SEAL | ||
| 230-4009 | [1] | PLUG AS-CONNECTOR (12-PIN) | ||
| 264-7034 | [1] | SEAL-CONNECTOR | ||
| 160-8124 | [1] | PLUG AS (2-PIN) | ||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 281-3115 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 240-7877 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 240-7874 | [4] | PLUG AS-CONNECTOR (2-PIN) | ||
| (EACH PLUG AS INCLUDES) | ||||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 240-7878 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 281-3120 | [2] | PLUG AS-CONNECTOR (3-PIN) | ||
| 281-3119 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 240-7879 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| (EACH PLUG AS INCLUDES) | ||||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 264-5732 | [1] | PLUG AS-CONNECTOR (120-PIN) | ||
| 288-7324 | [1] | SEAL-CONNECTOR | ||
| 281-3395 | [1] | PLUG AS-CONNECTOR (12-PIN) | ||
| 264-7034 | [1] | SEAL-CONNECTOR | ||
| 351-8647 | [1] | PLUG AS-CONNECTOR (12-PIN) | ||
| 8T-8737 | [12] | PLUG-SEAL | ||
| 241-8834 | [1] | PLUG AS-CONNECTOR (12-PIN) | ||
| 264-7034 | [1] | SEAL-CONNECTOR | ||
| 8T-8737 | [72] | PLUG-SEAL | ||
| 260-6728 | [1] | RECEPTACLE AS-CONNECTOR (12-PIN) | ||
| 134-2540 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 307-2338 E | SLEEVE (6-CM) | |||
| 9X-3402 | [120] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [120] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 344-1687 | [3] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 1S-9593 | [5] | STRAP-CABLE | ||
| 329-3734 B | TAPE-ELECTRICAL | |||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(35-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM) | |||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP68160312
428-7383: HARNESS AS-ENGINE
428-7383 HARNESS AS-ENGINE
S/N T4F505-UP
PART OF 380-6963 WIRING GP-ELECTRONIC CONTROL, 428-7384 WIRING GP-ENGINE
S/N T4F505-UP
PART OF 380-6963 WIRING GP-ELECTRONIC CONTROL, 428-7384 WIRING GP-ENGINE
For full view, you need register
Parts for your 730C EJECTOR TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | Y | [1] | HARNESS AS-ENGINE | |
| 2. | 3S-2093 | [1] | STRAP-CABLE | |
| 3. | 6K-0806 | [1] | STRAP-CABLE | |
| 4. | 7K-1181 | [1] | STRAP-CABLE | |
| 5. | 269-4005 | [1] | RECEPTACLE AS-CONNECTOR | |
| 8T-8737 | [3] | PLUG-SEAL | ||
| 230-4014 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 6. | 344-2466 | [1] | COVER AS | |
| 7. | [2] | BRACKET AS | ||
| (EACH INCLUDES) | ||||
| 140-1823 | [1] | SPACER (11X19.05X10.5-MM THK) | ||
| [1] | COVER | |||
| 8. | [1] | BRACKET AS | ||
| 144-8344 | [1] | SPACER (11X19X20-MM THK) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP68160313
367-1758: HARNESS AS-FRONT
For full view, you need register
Parts for your 730C EJECTOR TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 231-2295 | [1] | PLUG AS-CONNECTOR (8-PIN) | ||
| 264-7033 | [1] | SEAL-CONNECTOR | ||
| 272-2838 | [1] | PLUG AS-CONNECTOR (31-PIN) | ||
| 8T-8737 | [17] | PLUG-SEAL | ||
| 274-3784 | [1] | CAP-SEAL | ||
| 274-3778 | [1] | CAP-SEAL | ||
| 186-3736 | [20] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0844 | [4] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 126-1768 | [6] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 194-5226 | [4] | WIRE AS (16-GA) | ||
| -OR- | ||||
| 194-5227 | [4] | WIRE AS (14-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP68160314
420-3195: HARNESS AS-FRONT
420-3195 HARNESS AS-FRONT -CLEAN EMISSIONS MODULE
S/N TFH1-UP
PART OF 425-6240 WIRING GP-FRONT
S/N TFH1-UP
PART OF 425-6240 WIRING GP-FRONT
For full view, you need register
Parts for your 730C EJECTOR TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 213-0139 | [4] | PIN (4-MM) | ||
| 174-0503 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 177-9656 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 230-4009 | [1] | PLUG AS-CONNECTOR (12-PIN) | ||
| 264-7034 | [1] | SEAL-CONNECTOR | ||
| 239-7352 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 230-5010 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| (EACH PLUG AS INCLUDES) | ||||
| 264-7032 | [1] | SEAL-CONNECTOR | ||
| 8T-8737 | [18] | PLUG-SEAL | ||
| 134-2540 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 169-0705 | [6] | SEAL | ||
| 7T-0094 | [2] | SOCKET-CONNECTOR (12-GA TO 14-GA) | ||
| 8T-8730 | [11] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [19] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [19] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 128-4170 | [1] | TERMINAL AS | ||
| 6H-3587 | [1] | TERMINAL-RING (6-GA TO 8-GA, 3/8-IN SCREW) | ||
| 6V-9023 E | TUBE-HEAT SHRINK (12.7-MM DIA)(4-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(15-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM) | |||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP68160315
423-7678: HARNESS AS-FRONT
423-7678 HARNESS AS-FRONT -OUTPUT TRANSFER GEAR
S/N TFH1-UP
PART OF 491-1476 GEAR GP-TRANSFER
S/N TFH1-UP
PART OF 491-1476 GEAR GP-TRANSFER
For full view, you need register
Parts for your 730C EJECTOR TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 230-4013 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 8T-8730 | [11] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 126-1768 | [3] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| B | USE AS REQUIRED | |||
#SEBP68160316
420-5134: HARNESS AS-FRONT CHASSIS
420-5134 HARNESS AS-FRONT CHASSIS -CLEAN EMISSIONS MODULE
S/N TFH1-UP
PART OF 425-6240 WIRING GP-FRONT
S/N TFH1-UP
PART OF 425-6240 WIRING GP-FRONT
For full view, you need register
Parts for your 730C EJECTOR TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 8T-8729 | [20] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0852 | [8] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [31] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [31] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 225-3854 | [1] | PLUG AS-CONNECTOR (31-PIN) | ||
| 8T-8737 | [12] | PLUG-SEAL | ||
| 324-6267 | [1] | RECEPTACLE AS-CONNECTOR (40-PIN) | ||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 2L-8079 | [1] | TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW) | ||
| B | USE AS REQUIRED | |||
#SEBP68160317
455-6292: HARNESS AS-FRONT CHASSIS
455-6292 HARNESS AS-FRONT CHASSIS
S/N TFH1-UP
PART OF 425-6240 WIRING GP-FRONT
S/N TFH1-UP
PART OF 425-6240 WIRING GP-FRONT
For full view, you need register
Parts for your 730C EJECTOR TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 274-3774 | [1] | CAP-CONNECTOR | ||
| 360-3747 | [1] | BOOT | ||
| 180-9214 | [1] | NUT (1-11/16-18-THD) | ||
| 213-0139 | [2] | PIN (4-MM) | ||
| 7T-0093 | [2] | PIN-CONNECTOR (12-GA TO 14-GA) | ||
| 8T-8729 | [23] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0852 | [5] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [1] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [1] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 262-9151 | [4] | PIN-CONNECTOR (12-GA TO 14-GA) | ||
| 276-1151 | [1] | PIN-CONNECTOR (8-GA TO 10-GA) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (PLUG KIT INCLUDES PLUG AS, WEDGES & INTERFACE SEAL) | ||||
| 155-2255 | [2] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [4] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 160-7689 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 230-4009 | [1] | PLUG AS-CONNECTOR (12-PIN) | ||
| 241-8834 | [1] | PLUG AS-CONNECTOR (12-PIN) | ||
| (EACH PLUG AS INCLUDES) | ||||
| 455-0709 | [1] | SEAL-CONNECTOR | ||
| 272-2838 | [2] | PLUG AS-CONNECTOR (31-PIN) | ||
| 273-6315 | [2] | PLUG AS (9-PIN) | ||
| 225-3854 | [1] | PLUG AS-CONNECTOR (31-PIN) | ||
| 8T-8737 | [110] | PLUG-SEAL | ||
| 274-8267 | [3] | PLUG (4-GA) | ||
| 169-0705 | [12] | SEAL | ||
| 7T-0094 | [3] | SOCKET-CONNECTOR (12-GA TO 14-GA) | ||
| 8T-8730 | [61] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0844 | [28] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3402 | [43] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [43] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 194-5226 | [8] | WIRE AS (16-GA) | ||
| -OR- | ||||
| 194-5227 | [8] | WIRE AS (14-GA) | ||
| 204-6195 | [4] | SOCKET-CONNECTOR (10-GA) | ||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 3T-4696 | [2] | TERMINAL-RING (10-GA TO 12-GA, 7/16-IN SCREW) | ||
| 2L-8067 | [1] | TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW) | ||
| 2L-8076 | [1] | TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(25-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM) | |||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP68160318
445-8647: HARNESS AS-HITCH
For full view, you need register
Parts for your 730C EJECTOR TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 4S-6679 | [2] | ADAPTER | ||
| 392-0494 I | [1] | HOSE AS | ||
| 2V-2043 | [2] | NUT-BULKHEAD (1-5/8-12-THD) | ||
| 180-9214 | [1] | NUT (1-11/16-18-THD) | ||
| 8T-8729 | [10] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0852 | [6] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [6] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 272-2838 | [1] | PLUG AS-CONNECTOR (31-PIN) | ||
| 8T-8737 | [18] | PLUG-SEAL | ||
| 272-2840 | [1] | RECEPTACLE AS-CONNECTOR (31-PIN) | ||
| 8T-8730 | [10] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0844 | [6] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 194-5226 | [6] | WIRE AS (16-GA) | ||
| -OR- | ||||
| 194-5226 | [6] | WIRE AS (16-GA) | ||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| B | USE AS REQUIRED | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
#SEBP68160319
364-3066: HARNESS AS-LIGHTING
364-3066 HARNESS AS-LIGHTING
S/N TFH1-UP
PART OF 373-3663 LIGHTING GP-CAB
AN ATTACHMENT
S/N TFH1-UP
PART OF 373-3663 LIGHTING GP-CAB
AN ATTACHMENT
For full view, you need register
Parts for your 730C EJECTOR TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8730 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| [1] | TERMINAL AS | |||
| [1] | TERMINAL AS | |||
| (EACH INCLUDES) | ||||
| 6V-2689 D | TUBE-HEAT SHRINK (6.35-MM DIA)(0.1-M) | |||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(1-CM) | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||