COOLING SYSTEM
FAN GPPOWER TRAIN
COOLER GPCOOLING SYSTEM
PUMP GP-WATERRADIATOR GP
LINES GP-WATER
COOLING SYSTEM
FAN GP
#SEBP68220100
337-9761: FAN GP-SUCTION
337-9761 FAN GP-SUCTION -WITHOUT AIR CONDITIONER
S/N LYA1-UP
PART OF 353-1466 FAN AR-SUCTION, 450-8701 HEATER AR-CAB
Type 2
AN ATTACHMENT
S/N LYA1-UP
PART OF 353-1466 FAN AR-SUCTION, 450-8701 HEATER AR-CAB
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 416F2 BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 377-9082 | [1] | BELT TENSIONER | |
| 2. | 284-1026 | [1] | PULLEY (8-GROOVE) | |
| 3. | 390-0532 | [1] | BELT-SERPENTINE (FAN PULLEY) | |
| 4. | 349-3261 | [1] | PLATE-TENSIONER | |
| 5. | 352-8358 | [1] | GUARD AS-FAN | |
| 6. | 360-2827 | [1] | FAN (7-BLADE) | |
| 7. | 448-8168 | [1] | FILM-INFORMATION (BELT ROUTING) | |
| 8. | 379-2198 | [1] | SPACER-FAN (10-GA TO 12-GA, 1/4-IN SCREW) | |
| 9. | 178-3336 M | [4] | NUT-HEX FLANGE (M8X1.25-THD) | |
| 10. | 8T-5091 CM | [4] | BOLT (M8X1.25X20-MM) | |
| 11. | 5P-4116 | [4] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 12. | 8T-4121 | [3] | WASHER-HARD (11X21X2.5-MM THK) | |
| 13. | 8T-4196 M | [3] | BOLT (M10X1.5X35-MM) | |
| 14. | 8T-4224 C | [8] | WASHER-HARD (8.8X16X2-MM THK) | |
| 15. | 8T-7547 M | [4] | BOLT (M8X1.25X30-MM) | |
| 16. | 9X-2099 M | [4] | STUD (M8X1.25X52.75-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP68220101
337-9762: FAN GP-SUCTION
337-9762 FAN GP-SUCTION -WITH AIR CONDITIONER
S/N LYA1-UP
PART OF 450-8702 HEATER & AIR CONDITIONER AR
Type 1
AN ATTACHMENT
S/N LYA1-UP
PART OF 450-8702 HEATER & AIR CONDITIONER AR
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 416F2 BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 377-9087 | [1] | BELT TENSIONER | |
| 2. | 261-0428 | [1] | PULLEY AS-IDLER | |
| 307-2242 M | [1] | BOLT (M10X1.5X45-MM) | ||
| 3. | 284-1026 | [1] | PULLEY (8-GROOVE) | |
| 4. | 390-0536 | [1] | BELT-SERPENTINE (FAN PULLEY) | |
| 5. | 348-8149 | [1] | PLATE-MOUNTING | |
| 6. | 352-8358 | [1] | GUARD AS-FAN | |
| 7. | 360-2827 | [1] | FAN (7-BLADE) | |
| 8. | 448-8167 | [1] | FILM-INFORMATION (BELT ROUTING) | |
| 9. | 379-2198 | [1] | SPACER-FAN (10-GA TO 12-GA, 1/4-IN SCREW) | |
| 10. | 178-3336 M | [4] | NUT-HEX FLANGE (M8X1.25-THD) | |
| 11. | 342-9920 M | [4] | BOLT-FLANGE HEAD (M8X1.25X20-MM) | |
| 12. | 5P-4116 | [4] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 13. | 8T-4121 | [3] | WASHER-HARD (11X21X2.5-MM THK) | |
| 14. | 8T-4196 M | [3] | BOLT (M10X1.5X35-MM) | |
| 15. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 16. | 8T-7547 M | [4] | BOLT (M8X1.25X30-MM) | |
| 17. | 9X-2099 M | [4] | STUD (M8X1.25X52.75-MM) | |
| M | METRIC PART | |||
#SEBP68220102
337-9762: FAN GP-SUCTION
337-9762 FAN GP-SUCTION -WITH AIR CONDITIONER
S/N LYA1-UP
PART OF 450-8702 HEATER & AIR CONDITIONER AR
Type 2
AN ATTACHMENT
S/N LYA1-UP
PART OF 450-8702 HEATER & AIR CONDITIONER AR
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 416F2 BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 377-9087 | [1] | BELT TENSIONER | |
| 2. | 261-0428 | [1] | PULLEY AS-IDLER | |
| 307-2242 M | [1] | BOLT (M10X1.5X45-MM) | ||
| 3. | 284-1026 | [1] | PULLEY (8-GROOVE) | |
| 4. | 390-0536 | [1] | BELT-SERPENTINE (FAN PULLEY) | |
| 5. | 348-8149 | [1] | PLATE-MOUNTING | |
| 6. | 352-8358 | [1] | GUARD AS-FAN | |
| 7. | 360-2827 | [1] | FAN (7-BLADE) | |
| 8. | 448-8167 | [1] | FILM-INFORMATION (BELT ROUTING) | |
| 9. | 379-2198 | [1] | SPACER-FAN (10-GA TO 12-GA, 1/4-IN SCREW) | |
| 10. | 178-3336 M | [4] | NUT-HEX FLANGE (M8X1.25-THD) | |
| 11. | 8T-5091 CM | [4] | BOLT (M8X1.25X20-MM) | |
| 12. | 5P-4116 | [4] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 13. | 8T-4121 | [3] | WASHER-HARD (11X21X2.5-MM THK) | |
| 14. | 8T-4196 M | [3] | BOLT (M10X1.5X35-MM) | |
| 15. | 8T-4224 C | [8] | WASHER-HARD (8.8X16X2-MM THK) | |
| 16. | 8T-7547 M | [4] | BOLT (M8X1.25X30-MM) | |
| 17. | 9X-2099 M | [4] | STUD (M8X1.25X52.75-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP68220103
459-1177: FAN GP-SUCTION
459-1177 FAN GP-SUCTION -WITH AIR CONDITIONER
S/N LYA1-UP
PART OF 450-8705 HEATER & AIR CONDITIONER AR
AN ATTACHMENT
S/N LYA1-UP
PART OF 450-8705 HEATER & AIR CONDITIONER AR
AN ATTACHMENT
For full view, you need register
Parts for your 416F2 BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 261-0428 | [1] | PULLEY AS-IDLER | |
| 307-2242 M | [1] | BOLT (M10X1.5X45-MM) | ||
| 2. | 284-1026 | [1] | PULLEY (8-GROOVE) | |
| 3. | 348-8149 | [1] | PLATE-MOUNTING | |
| 4. | 352-8358 | [1] | GUARD AS-FAN | |
| 5. | 377-9087 | [1] | BELT TENSIONER | |
| 6. | 390-0536 | [1] | BELT-SERPENTINE (FAN PULLEY) | |
| 7. | 426-0616 | [1] | SPACER-FAN | |
| 8. | 448-8167 | [1] | FILM-INFORMATION (BELT ROUTING) | |
| 9. | 454-3411 | [1] | FAN (6-BLADE) | |
| 10. | 178-3336 M | [4] | NUT-HEX FLANGE (M8X1.25-THD) | |
| 11. | 8T-5091 M | [4] | BOLT (M8X1.25X20-MM) | |
| 12. | 5P-4116 | [4] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 13. | 8T-4121 | [3] | WASHER-HARD (11X21X2.5-MM THK) | |
| 14. | 8T-4196 M | [3] | BOLT (M10X1.5X35-MM) | |
| 15. | 8T-4224 | [8] | WASHER-HARD (8.8X16X2-MM THK) | |
| 16. | 8T-7547 M | [4] | BOLT (M8X1.25X30-MM) | |
| 17. | 6I-4733 M | [4] | STUD (M8X1.25-THD) | |
| M | METRIC PART | |||
#SEBP68220104
391-9939: LINES GP-POWER TRAIN COOLER
391-9939 LINES GP-POWER TRAIN COOLER -STANDARD SHIFT
S/N LYA1-UP
PART OF 450-8661, 450-8663 TRANSMISSION AR-DIRECT DRIVE
AN ATTACHMENT
S/N LYA1-UP
PART OF 450-8661, 450-8663 TRANSMISSION AR-DIRECT DRIVE
AN ATTACHMENT
For full view, you need register
Parts for your 416F2 BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9U-6992 | [1] | CONNECTOR AS | |
| 2M-9780 | [1] | SEAL-O-RING | ||
| 195-7930 | [1] | CONNECTOR | ||
| 2. | 9X-6772 | [1] | STRAP-CABLE | |
| 3. | 323-3308 | [8] | CAP | |
| 4. | 334-6086 | [1] | COUPLING AS | |
| 5. | 370-4021 | [1] | TUBE | |
| 6. | 386-6191 | [1] | ELBOW AS | |
| 2M-9780 | [1] | SEAL-O-RING | ||
| 275-4918 | [1] | ELBOW | ||
| 7. | 148-8322 | [1] | CONNECTOR AS | |
| 2M-9780 | [1] | SEAL-O-RING | ||
| 6V-8640 | [1] | CONNECTOR | ||
| 6V-9746 | [1] | SEAL-O-RING | ||
| 8. | 3E-7445 | [8] | CLAMP-HOSE | |
| 9. | 3S-2093 | [4] | STRAP-CABLE | |
| 10. | 4P-7581 | [1] | CLIP (LADDER) | |
| 11. | 6D-4246 | [2] | CLIP (LOOP) | |
| 12. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 13. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 14. | 262-8088 E | HOSE (108-CM) | ||
| 14A. | 262-8088 E | HOSE (66-CM) | ||
| 14B. | 262-8088 E | HOSE (43-CM) | ||
| 14C. | 262-8088 E | HOSE (74-CM) | ||
| 15. | 160-2246 G | SLEEVE-ABRASION (9.8-IN EACH) | ||
| 15A. | 160-2246 G | SLEEVE-ABRASION (13.8-IN) | ||
| E | ORDER BY THE CENTIMETER | |||
| G | ORDER BY THE INCH | |||
| M | METRIC PART | |||
#SEBP68220105
230-7355: PUMP GP-WATER
230-7355 PUMP GP-WATER
S/N CRS1-UP
PART OF 352-1451, 521-6420 ENGINE AR-PRIMARY
AN ATTACHMENT
S/N CRS1-UP
PART OF 352-1451, 521-6420 ENGINE AR-PRIMARY
AN ATTACHMENT
For full view, you need register
Parts for your 416F2 BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6I-0217 M | [2] | BOLT (M8X1.25X20-MM) | |
| 2. | 6I-0254 M | [2] | BOLT (M8X1.25X30-MM) | |
| 3. | 100-3751 M | [5] | BOLT (M8X1.25X65-MM) | |
| 4. | 113-8129 M | [2] | BOLT (M8X1.25X75-MM) | |
| 5. | 225-7741 | [1] | CONNECTION AS | |
| 5A. | 225-7738 | [1] | SEAL-O-RING | |
| 5B. | 225-7739 | [1] | SEAL-O-RING | |
| 6. | 354-1672 C | [1] | PUMP GP-WATER | |
| 6A. | 225-8019 | [1] | GASKET | |
| AVAILABLE REPAIR KIT(S): | ||||
| 247-0144 | [1] | KIT-GASKET (WATER PUMP) | ||
| (INCLUDES PUMP HOUSING GASKET & COVER GASKET) | ||||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP68220106
315-3411: PUMP GP-WATER
315-3411 PUMP GP-WATER
S/N CRS1-UP; C4Z1-UP
PART OF 375-1283, 520-2746, 521-6422 ENGINE AR-PRIMARY
AN ATTACHMENT
S/N CRS1-UP; C4Z1-UP
PART OF 375-1283, 520-2746, 521-6422 ENGINE AR-PRIMARY
AN ATTACHMENT
For full view, you need register
Parts for your 416F2 BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6I-0217 M | [2] | BOLT (M8X1.25X20-MM) | |
| 2. | 6I-0254 M | [2] | BOLT (M8X1.25X30-MM) | |
| 3. | 100-3751 M | [5] | BOLT (M8X1.25X65-MM) | |
| 4. | 113-8129 M | [2] | BOLT (M8X1.25X75-MM) | |
| 5. | 225-7741 | [1] | CONNECTION AS | |
| 5A. | 225-7738 | [1] | SEAL-O-RING | |
| 5B. | 225-7739 | [1] | SEAL-O-RING | |
| 6. | 355-2252 | [1] | PUMP GP-WATER | |
| 6A. | 225-8019 | [1] | GASKET | |
| (USE ADDITIONAL GASKET # 374-4419) BETWEEN COVER PLATE AND WATER PUMP FOR SEALING PURPOSES.) | ||||
| M | METRIC PART | |||
#SEBP68220107
352-1456: RADIATOR & HYD OIL COOLER GP
352-1456 RADIATOR & HYD OIL COOLER GP
S/N LYA1-UP
PART OF 352-1455 COOLING GP
AN ATTACHMENT
S/N LYA1-UP
PART OF 352-1455 COOLING GP
AN ATTACHMENT
For full view, you need register
#SEBP68220108
358-3844: RADIATOR & HYD OIL COOLER GP
358-3844 RADIATOR & HYD OIL COOLER GP
S/N LYA1-UP
PART OF 354-7361 TANK & LINES GP-COOLANT
AN ATTACHMENT
S/N LYA1-UP
PART OF 354-7361 TANK & LINES GP-COOLANT
AN ATTACHMENT
For full view, you need register
Parts for your 416F2 BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 377-5263 | [1] | RADIATOR GP | |
| 225-4287 | [1] | VALVE GP-RADIATOR DRAIN | ||
| 385-8594 | [2] | RECEPTACLE | ||
| 2. | 377-5264 | [1] | AFTERCOOLER GP-AIR | |
| 3. | 377-5265 | [1] | COOLER GP-OIL (HYDRAULIC) | |
| 385-8591 | [2] | STUD | ||
| 385-8593 | [2] | RETAINER | ||
| 4. | 8T-4189 M | [4] | BOLT (M8X1.25X20-MM) | |
| 5. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| M | METRIC PART | |||
#SEBP68220109
354-7361: TANK & LINES GP-COOLANT
354-7361 TANK & LINES GP-COOLANT -EXPANSION, RADIATOR
S/N LYA1-UP
PART OF 450-8751 ENGINE AR, 485-5498 ENGINE AR-COMPLETE
Type 1
AN ATTACHMENT
S/N LYA1-UP
PART OF 450-8751 ENGINE AR, 485-5498 ENGINE AR-COMPLETE
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 416F2 BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6N-6984 | [4] | MOUNT-RUBBER | |
| 2. | 9M-7958 | [1] | CLAMP-HOSE | |
| 3. | 247-1385 | [1] | TANK GP-COOLANT | |
| 251-3227 | [1] | CAP AS-COOLANT TANK | ||
| 4. | 386-6191 | [1] | ELBOW AS | |
| 2M-9780 | [1] | SEAL-O-RING | ||
| 275-4918 | [1] | ELBOW | ||
| 5. | 323-3308 C | [3] | CAP | |
| 6. | 323-3309 | [4] | CAP | |
| 7. | 329-5699 | [1] | HOSE | |
| 8. | 343-5421 | [2] | SHROUD AS | |
| 9. | 352-8799 | [1] | PLATE | |
| 10. | 353-8082 | [1] | SEAL | |
| 11. | 354-8258 | [1] | HOSE-RADIATOR (UPPER) | |
| 12. | 358-3844 Y | [1] | RADIATOR & HYD OIL COOLER GP | |
| 13. | 373-9373 | [1] | HOSE-RADIATOR (LOWER) | |
| 14. | 4P-7581 | [1] | CLIP (LADDER) | |
| 15. | 1B-3057 | [1] | CLIP | |
| 18. | 4D-7388 | [1] | CLIP (LOOP) | |
| 19. | 5C-7261 M | [8] | NUT (M8X1.25-THD) | |
| 20. | 381-0212 C | [2] | CLAMP-HOSE | |
| 21. | 5P-4116 | [5] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 22. | 7X-0579 | [10] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 23. | 8T-4133 M | [4] | NUT (M10X1.5-THD) | |
| 24. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 25. | 8T-4200 M | [2] | BOLT (M8X1.25X16-MM) | |
| 26. | 8T-4222 | [6] | WASHER-PLATED (11X32X2.5-MM THK) | |
| 27. | 8T-4908 M | [4] | BOLT (M8X1.25X25-MM) | |
| 28. | 8T-4984 | [4] | CLAMP-HOSE | |
| 29. | 8C-3681 E | HOSE (50-CM) | ||
| 29A. | 8C-3681 E | HOSE (110-CM) | ||
| 31. | 150-1974 E | SEAL (56.5-CM EACH) | ||
| 33. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 34. | 8T-4199 M | [1] | BOLT (M8X1.25X12-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
COOLING SYSTEM
FAN GP
Disassembly and Assembly
