391-6359 FLOORPLATE GP -CAB S/N LYF1-UP PART OF 398-2712 CAB AR, 398-2710 CANOPY AR, 398-2711 CANOPY AR-OPEN ROPS AN ATTACHMENT 422F2

Pos.	Part No	Qty	Parts name
1.	391-6355	[1]	PLATE AS
	159-9539 M	[1]	NUT-WELD (M6X1-THD)
2.	391-6357	[1]	PLATE AS
	7T-1099	[1]	LINK
3.	7X-0579	[6]	WASHER-HARD (8.8X25.5X2-MM THK)
4.	9X-2045 M	[6]	SCREW-TRUSS HEAD (M6X1X20-MM)
	M		METRIC PART

#SEBP68270381

428-7600: FRAME GP-LOADER

FRAME GP-LOADER

428-7600 FRAME GP-LOADER -NARROW
S/N LYF1-UP
PART OF 450-8487 CHASSIS AR

i05926170 SEBP6827

For full view, you need register

Parts for your 422F2 BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	193-1681 B	[8]	PAD (5.2-MM THK)
2.	193-1683 B	[2]	PAD (4.2-MM THK)
3.	193-1684 B	[2]	PAD (6.2-MM THK)
4.	248-5245	[2]	FILM-INFORMATION (LIFT EYE, TIE-DOWN LOCATION)
5.	252-2157	[2]	FILM-INFORMATION (TIE-DOWN)
6.	330-0798	[2]	TUBE AS
7.	331-2489	[4]	PAD-WEAR
8.	331-4365	[2]	COVER
9.	340-9290	[4]	PLATE GP-COVER
10.	370-5555	[2]	CAP
11.	428-8956	[1]	FRAME AS (NARROW)
	7T-1099	[1]	LINK
	9R-2613 M	[2]	BOSS-WELD (M10X1.5X25-MM)
	9R-3572 M	[4]	BOSS (M12X1.75X20-MM)
12.	449-2690	[2]	GUARD
13.	246-7854 M	[49]	NUT-SPECIAL (M10X1.5-THD)
14.	370-0495 M	[7]	NUT-SPECIAL (M8X1.25-THD)
15.	3B-8489	[2]	FITTING-GREASE (1/8-27 PTF)
16.	5C-7261 M	[8]	NUT (M8X1.25-THD)
17.	6V-9189 M	[2]	LOCKNUT (M8X1.25-THD)
18.	7X-0579	[18]	WASHER-HARD (8.8X25.5X2-MM THK)
19.	8T-4196 M	[2]	BOLT (M10X1.5X35-MM)
20.	8T-4197 M	[2]	BOLT (M8X1.25X40-MM)
21.	8T-7338 M	[8]	BOLT (M16X2X45-MM)
22.	8T-7547 M	[6]	BOLT (M8X1.25X30-MM)
23.	9X-8257	[8]	WASHER (17.5X30X3.5-MM THK)
	B		USE AS REQUIRED
	M		METRIC PART

#SEBP68270382

320-5933: FRAME GP-SLIDING

FRAME GP-SLIDING

320-5933 FRAME GP-SLIDING
S/N LYF1-UP
PART OF 450-8487 CHASSIS AR

i04577432 SEBP6827

For full view, you need register

Parts for your 422F2 BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9R-0481	[2]	WASHER (71X110X4-MM THK)
2.	161-7145	[4]	SEAL-PISTON
3.	381-8054 CY	[1]	CYLINDER GP-SWING (RH)
4.	381-8055 CY	[1]	CYLINDER GP-SWING (LH)
5.	316-4811	[1]	WASHER (66.5X120X8-MM THK)
6.	320-2948	[4]	CAP-CYLINDER END
7.	320-2949	[2]	BAR
8.	320-3619	[4]	PISTON
9.	320-3620	[2]	PAD
10.	322-3768	[1]	CAP & BEARING AS
10A.	9R-4110	[2]	BUSHING
11.	322-3770	[1]	FRAME AS-SLIDING
11A.	331-1521	[1]	BEARING
11B.	331-1522	[1]	BEARING
11C.	9R-4110	[2]	BUSHING
12.	340-6272	[8]	RING-WEAR
13.	341-4712	[2]	BAR
14.	169-5792 M	[12]	BOLT (M24X3X160-MM)
15.	3B-8488	[2]	FITTING-GREASE (1/8-27 PTF)
16.	3B-8489	[2]	FITTING-GREASE (1/8-27 PTF)
17.	3P-0439	[4]	SEAL-O-RING
18.	7K-9208	[4]	SEAL-LIP TYPE
19.	8C-3347	[2]	PIN-ROLL
20.	8T-1482	[6]	WASHER-HARD (26X50X8-MM THK)
21.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
22.	8T-4167	[6]	WASHER-HARD (26X44X4-MM THK)
23.	213-5007 M	[4]	BOLT (M20X2.5X80-MM)
24.	8T-4648 M	[16]	BOLT (M12X1.75X70-MM)
25.	8T-5035 M	[4]	BOLT (M10X1.5X65-MM)
26.	8T-5439	[4]	WASHER-HARD (21.5X45X6-MM THK)
27.	8T-7971	[16]	WASHER-HARD (13.5X25.5X5-MM THK)
28.	298-4783	[2]	DOWEL
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP68270383

378-9623: FRAME GP-SWING

FRAME GP-SWING

378-9623 FRAME GP-SWING
S/N LYF1-UP
PART OF 450-8734, 450-8735 BACKHOE AR-EXTENDABLE STICK, 450-8733 BACKHOE AR-STANDARD STICK
AN ATTACHMENT

i04628912 SEBP6827

For full view, you need register

Parts for your 422F2 BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2U-9234	[1]	BUSHING
2.	176-0626 B	[2]	WASHER (67.5X120X3-MM THK)
3.	9R-8291 B	[2]	SPACER (66X125X1-MM THK)
4.	310-0851	[2]	PIN
5.	316-6951	[1]	PIN AS
6.	316-6952	[1]	PIN AS
7.	326-0089	[1]	PIN AS
8.	375-1442	[1]	RING-RETAINING
9.	378-9622	[1]	FRAME AS-SWING
9A.	213-6702	[4]	BUSHING
9B.	331-1521	[2]	BEARING
10.	270-5290 M	[1]	BOLT-SOCKET HEAD (M12X1.75X300-MM)
11.	3B-8489	[2]	FITTING-GREASE (1/8-27 PTF)
12.	5P-1076	[2]	WASHER-HARD (13.5X30X4-MM THK)
13.	6V-7687 M	[1]	LOCKNUT (M12X1.75-THD)
14.	7X-0632	[2]	WASHER-HARD (11X36X6-MM THK)
15.	8T-4136 M	[1]	BOLT (M10X1.5X25-MM)
16.	8T-4196 M	[1]	BOLT (M10X1.5X35-MM)
17.	422-8652	[1]	GUARD
	B		USE AS REQUIRED
	M		METRIC PART

#SEBP68270384

368-0291: GRILL GP-RADIATOR

GRILL GP-RADIATOR

368-0291 GRILL GP-RADIATOR
S/N LYF1-UP
PART OF 397-5422 HOOD & GUARD GP

i05190324 SEBP6827

For full view, you need register

Parts for your 422F2 BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	127-2170 CM	[12]	SCREW-TRUSS HEAD (M8X1.25X20-MM)
2.	365-2511	[1]	CAM-LATCH
3.	369-3473	[1]	PIN
4.	369-3945	[1]	BRACKET AS
	159-9540 M	[3]	NUT-WELD (M8X1.25-THD)
5.	372-4613	[2]	PLATE
6.	382-6675	[2]	LATCH-MAGNETIC
7.	388-5405	[1]	BRACKET AS
8.	388-7212	[8]	BUSHING
9.	389-6955 J	[1]	LOCK AS
10.	391-0347	[1]	PLATE
11.	398-8225 C	[1]	COVER
12.	416-2590 C	[1]	GRILL
13.	416-2615 C	[1]	GUARD AS
14.	416-4112 C	[1]	FRAME AS-GRILL
15.	130-1916 M	[2]	STUD-BALL (M8X1.25X20-MM)
16.	178-3336 M	[4]	NUT-HEX FLANGE (M8X1.25-THD)
17.	206-6969	[2]	PAWL
18.	220-0738 E		SEAL (63-CM)
19.	260-3568 J	[2]	LATCH AS
20.	3T-0852 M	[1]	LOCKNUT (M8X1.25-THD)
21.	8S-7803	[2]	RING-RETAINING
22.	8T-4123	[2]	WASHER (22X35X3.5-MM THK)
23.	8T-4189 CM	[2]	BOLT (M8X1.25X20-MM)
24.	8T-4224 C	[2]	WASHER-HARD (8.8X16X2-MM THK)
25.	3E-6600 E		SEAL (68-CM)
26.	5P-4116	[12]	WASHER-HARD (8.8X20.5X2-MM THK)
27.	5C-7261 M	[2]	NUT (M8X1.25-THD)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	J		REQUIRES CORPORATE KEY
	M		METRIC PART

#SEBP68270385

337-9697: GUARD GP-DRIVE SHAFT

GUARD GP-DRIVE SHAFT

337-9697 GUARD GP-DRIVE SHAFT
S/N LYF1-UP
AN ATTACHMENT

i04609209 SEBP6827

3379697 GUARD GP-DRIVE SHAFT Parts scheme

For full view, you need register

Parts for your 422F2 BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	399-7019	[1]	GUARD AS
2.	7X-2552 M	[4]	BOLT (M16X2X30-MM)
3.	8T-4122	[4]	WASHER-HARD (17X32X3.5-MM THK)
	M		METRIC PART

#SEBP68270386

467-4599: GUARD GP-LIGHTING

GUARD GP-LIGHTING

467-4599 GUARD GP-LIGHTING -REAR
S/N LYF1-UP
AN ATTACHMENT

i06147286 SEBP6827

For full view, you need register

Parts for your 422F2 BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	467-4598	[2]	GUARD-LIGHT
2.	8T-4224	[6]	WASHER-HARD (8.8X16X2-MM THK)
3.	8T-7547 M	[6]	BOLT (M8X1.25X30-MM)
	M		METRIC PART

#SEBP68270387

397-5422: HOOD & GUARD GP

HOOD & GUARD GP

397-5422 HOOD & GUARD GP
S/N LYF1-UP
PART OF 450-8487 CHASSIS AR

i05892781 SEBP6827

For full view, you need register

Parts for your 422F2 BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	130-1916 M	[4]	STUD-BALL (M8X1.25X20-MM)
2.	159-8033	[2]	FILM-IDENTIFICATION (12-VOLT)
3.	164-1368	[2]	FASTENER (CLIP)
4.	250-6858	[1]	LATCH AS
5.	351-4746	[1]	FILM-IDENTIFICATION (CAT)
6.	357-4273	[1]	HOOD (RH)
7.	357-4274	[1]	HOOD (LH)
8.	358-1415	[1]	GUARD AS
	9G-9155	[1]	CLIP
	159-9540 M	[4]	NUT-WELD (M8X1.25-THD)
9.	362-8135	[1]	BUMPER AS (RH)
10.	362-8136	[1]	BUMPER AS (LH)
			(EACH BUMPER AS INCLUDES)
	8C-8778 M	[2]	STUD-WELD (M8X1.25X25-MM)
11.	363-2867	[2]	SPRING AS-GAS (HOOD, REAR)
12.	366-9220	[1]	MAT
13.	367-0055	[1]	PLATE AS
14.	367-7764	[1]	PLATE
15.	368-0291 Y	[1]	GRILL GP-RADIATOR
16.	369-2053	[1]	PLATE AS
17.	372-4614	[1]	PLATE
18.	399-8347	[1]	CABLE AS
19.	417-4242	[1]	SPRING
20.	417-4328	[1]	BRACKET AS
	159-9540 M	[2]	NUT-WELD (M8X1.25-THD)
21.	418-4037	[2]	SPRING AS-GAS (HOOD, FRONT)
22.	420-4868 J	[1]	LOCK AS
23.	424-2305	[1]	GROMMET
24.	127-2170 M	[12]	SCREW-TRUSS HEAD (M8X1.25X20-MM)
25.	178-3336 M	[4]	NUT-HEX FLANGE (M8X1.25-THD)
26.	198-3899 M	[2]	SCREW-BUTTON HEAD (M8X1.25X20-MM)
27.	342-9913 M	[6]	BOLT-FLANGE HEAD (M10X1.5X20-MM)
28.	342-9920 M	[3]	BOLT-FLANGE HEAD (M8X1.25X20-MM)
29.	5C-7261 M	[3]	NUT (M8X1.25-THD)
30.	5P-4116	[9]	WASHER-HARD (8.8X20.5X2-MM THK)
31.	6V-8949 M	[2]	NUT (M10X1.5-THD)
32.	7X-2537 M	[2]	BOLT (M8X1.25X35-MM)
33.	9G-1307	[1]	GROMMET
34.	292-2896 E		CONDUIT (16.9-MM ID)(40-CM)
35.	220-0738 E		SEAL (52-CM EACH)
35A.	220-0738 E		SEAL (11-CM EACH)
35B.	220-0738 E		SEAL (5-CM EACH)
	E		ORDER BY THE CENTIMETER
	J		REQUIRES CORPORATE KEY
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP68270388

397-7509: HOOD GP-ENGINE

HOOD GP-ENGINE

397-7509 HOOD GP-ENGINE
S/N LYF1-UP
PART OF 450-8690 CAB AR, 450-8689 CANOPY AR
AN ATTACHMENT

i05907666 SEBP6827

For full view, you need register

Parts for your 422F2 BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	130-1916 M	[2]	STUD-BALL (M8X1.25X20-MM)
2.	250-6850	[2]	BRACKET AS
3.	358-7864	[1]	BRACKET AS
4.	361-7891	[2]	BRACKET AS
5.	371-7076	[1]	HINGE AS (RH)
6.	371-7077	[1]	HINGE AS (LH)
7.	372-4592	[1]	GRILL
8.	391-2140	[1]	BRACKET
9.	397-5456	[1]	INSERT AS
10.	397-7512	[1]	HOOD AS
11.	174-9194 M	[6]	BOLT (M8X1.25X16-MM)
12.	208-9297 M	[2]	BOLT-FLANGE HEAD (M10X1.5X50-MM)
13.	342-9920 M	[8]	BOLT-FLANGE HEAD (M8X1.25X20-MM)
14.	5C-7261 M	[6]	NUT (M8X1.25-THD)
15.	5P-4116	[6]	WASHER-HARD (8.8X20.5X2-MM THK)
16.	8T-4127 M	[6]	SCREW-MACHINE (M5X0.8X20-MM)
17.	9X-6383 E		SEAL (28-CM)
17A.	9X-6383 E		SEAL (22-CM)
18.	220-0738 E		SEAL (83-CM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP68270389

435-0435: HOOD GP-ENGINE

HOOD GP-ENGINE

435-0435 HOOD GP-ENGINE
S/N LYF1-UP
PART OF 450-8688 CANOPY AR
AN ATTACHMENT

i05907661 SEBP6827

For full view, you need register

Parts for your 422F2 BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	130-1916 M	[2]	STUD-BALL (M8X1.25X20-MM)
2.	250-6850	[2]	BRACKET AS
3.	358-7864	[1]	BRACKET AS
4.	361-4643	[1]	HOOD AS
5.	361-7891	[2]	BRACKET AS
6.	367-7625	[1]	INSERT AS
7.	371-7076	[1]	HINGE AS (RH)
8.	371-7077	[1]	HINGE AS (LH)
9.	372-4592	[1]	GRILL
10.	391-2140	[1]	BRACKET
11.	174-9194 M	[6]	BOLT (M8X1.25X16-MM)
12.	208-9297 M	[2]	BOLT-FLANGE HEAD (M10X1.5X50-MM)
13.	342-9920 M	[8]	BOLT-FLANGE HEAD (M8X1.25X20-MM)
14.	5C-7261 M	[6]	NUT (M8X1.25-THD)
15.	5P-4116	[6]	WASHER-HARD (8.8X20.5X2-MM THK)
16.	8T-4127 M	[6]	SCREW-MACHINE (M5X0.8X20-MM)
17.	9X-6383 E		SEAL (27.5-CM)
17A.	9X-6383 E		SEAL (21.8-CM)
18.	220-0738 E		SEAL (83-CM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART