BASIC ENGINE
VALVE MECHANISM GPCRANKSHAFT GP
CYLINDER BLOCK GP
BASIC ENGINE
VALVE MECHANISM GP
#SEBP68280040
335-9798: COVER GP-VALVE MECHANISM
335-9798 COVER GP-VALVE MECHANISM
S/N CRS1-UP
PART OF 352-1451, 364-5753, 521-6420, 521-6421 ENGINE AR-PRIMARY
AN ATTACHMENT
S/N CRS1-UP
PART OF 352-1451, 364-5753, 521-6420, 521-6421 ENGINE AR-PRIMARY
AN ATTACHMENT
For full view, you need register
Parts for your 428F2 BACKHOE LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6I-0260 M | [2] | BOLT (M8X1.25X25-MM) | |
| 2. | 308-1792 CY | [1] | COVER GP-VALVE MECHANISM | |
| 3. | 6I-0917 M | [1] | BOLT (M6X1X25-MM) | |
| 4. | 100-4838 M | [2] | BOLT (M6X1X20-MM) | |
| 5. | 100-4841 M | [2] | BOLT (M6X1X10-MM) | |
| 6. | 225-6522 | [1] | PLUG-CUP | |
| 7. | 346-8219 | [1] | FILM-WARNING (UNIVERSAL WARNING) | |
| 8. | 237-0769 | [1] | SHIELD-HEAT | |
| 9. | 317-3769 | [1] | FILLER GP-ENGINE OIL | |
| 9A. | 317-3778 | [1] | SEAL-O-RING | |
| 10. | 287-8573 | [1] | PIPE AS | |
| 10A. | 150-7732 | [1] | SEAL-O-RING | |
| 10B. | 286-3030 | [1] | RING-SEAL | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP68280041
232-7439: CRANKSHAFT GP
232-7439 CRANKSHAFT GP
S/N CRS1-UP
PART OF 521-6420, 521-6421 ENGINE AR-PRIMARY
AN ATTACHMENT
S/N CRS1-UP
PART OF 521-6420, 521-6421 ENGINE AR-PRIMARY
AN ATTACHMENT
For full view, you need register
Parts for your 428F2 BACKHOE LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 067-6135 C | [1] | KEY-WOODRUFF | |
| 2. | 216-8314 | [1] | GEAR-CRANKSHAFT (34-TEETH) | |
| 3. | 359-0715 CJY | [1] | CRANKSHAFT GP (W/O SPLINE)(CONNECTING ROD, 68-MM DIA) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| J | CHECK CONNECTING ROD JOURNAL TO ENSURE THIS IS THE CORRECT CRANKSHAFT | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP68280042
326-9000: CRANKSHAFT GP
326-9000 CRANKSHAFT GP
S/N C4Z1-UP
PART OF 375-1283, 375-1284, 521-6422, 521-6423 ENGINE AR-PRIMARY
AN ATTACHMENT
S/N C4Z1-UP
PART OF 375-1283, 375-1284, 521-6422, 521-6423 ENGINE AR-PRIMARY
AN ATTACHMENT
For full view, you need register
Parts for your 428F2 BACKHOE LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 216-8314 | [1] | GEAR-CRANKSHAFT (34-TEETH) | |
| 2. | 359-0715 CJY | [1] | CRANKSHAFT GP (W/O SPLINE)(CONNECTING ROD, 68-MM DIA) | |
| 3. | 067-6135 C | [1] | KEY-WOODRUFF | |
| AVAILABLE REPAIR KIT(S): | ||||
| 364-2829 Y | [1] | CRANKSHAFT GP | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| J | CHECK CONNECTING ROD JOURNAL TO ENSURE THIS IS THE CORRECT CRANKSHAFT | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP68280043
334-4203: CRANKSHAFT GP
334-4203 CRANKSHAFT GP
S/N CRS1-UP
PART OF 352-1451, 364-5753 ENGINE AR-PRIMARY
AN ATTACHMENT
S/N CRS1-UP
PART OF 352-1451, 364-5753 ENGINE AR-PRIMARY
AN ATTACHMENT
For full view, you need register
Parts for your 428F2 BACKHOE LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 216-8314 | [1] | GEAR-CRANKSHAFT (34-TEETH) | |
| 2. | 359-0715 CJY | [1] | CRANKSHAFT GP (W/O SPLINE)(CONNECTING ROD, 68-MM DIA) | |
| 3. | 067-6135 C | [1] | KEY-WOODRUFF | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| J | CHECK CONNECTING ROD JOURNAL TO ENSURE THIS IS THE CORRECT CRANKSHAFT | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP68280044
359-0715: CRANKSHAFT GP
359-0715 CRANKSHAFT GP
S/N CRS1-UP; C4Z1-UP
W/O SPLINE
PART OF 326-9000, 334-4203 CRANKSHAFT GP
Type 1
AN ATTACHMENT
S/N CRS1-UP; C4Z1-UP
W/O SPLINE
PART OF 326-9000, 334-4203 CRANKSHAFT GP
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 428F2 BACKHOE LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 032-9090 | [2] | WASHER-THRUST (STANDARD-UPPER) | |
| 067-6873 AB | WASHER-THRUST (0.18-MM OS) | |||
| 2. | 032-9091 | [2] | WASHER-THRUST (STANDARD-LOWER) | |
| 067-6874 AB | WASHER-THRUST (0.18-MM OS) | |||
| 3. | 353-7423 | [1] | KIT-BEARING (MAIN) | |
| 233-3786 AB | KIT-CRANKSHAFT BEARING (0.75-MM US) | |||
| 353-7424 AB | KIT-BEARING (0.25-MM US) | |||
| 353-7425 AB | KIT-BEARING (0.50-MM US) | |||
| 353-7426 AB | KIT-BEARING (0.75-MM US) | |||
| 4. | 360-3986 | [1] | KIT-BEARING (CONNECTING ROD)(STANDARD) | |
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
#SEBP68280045
359-0715: CRANKSHAFT GP
359-0715 CRANKSHAFT GP
S/N CRS1-UP; C4Z1-UP
W/O SPLINE
PART OF 232-7439, 326-9000, 334-4203 CRANKSHAFT GP
Type 2
AN ATTACHMENT
S/N CRS1-UP; C4Z1-UP
W/O SPLINE
PART OF 232-7439, 326-9000, 334-4203 CRANKSHAFT GP
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 428F2 BACKHOE LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | JP | [2] | PLATE-THRUST (STANDARD) | |
| 067-6873 AB | WASHER-THRUST (0.18-MM OS) | |||
| 2. | JP | [2] | PLATE-THRUST (STANDARD) | |
| 067-6874 AB | WASHER-THRUST (0.18-MM OS) | |||
| 3. | 518-5437 C | [1] | KIT-BEARING (MAIN) | |
| 518-5440 ABC | KIT-BEARING (0.254-MM US) | |||
| 518-5441 ABC | KIT-BEARING (0.508-MM US) | |||
| 518-5885 ABC | KIT-BEARING (0.762-MM US) | |||
| 4. | 360-3986 | [1] | KIT-BEARING (CONNECTING ROD)(STANDARD) | |
| 468-7762 AB | KIT-BEARING (0.254-MM US) | |||
| 468-7769 AB | KIT-BEARING (0.508-MM US) | |||
| 468-7770 AB | KIT-BEARING (0.762-MM US) | |||
| AVAILABLE REPAIR KIT(S): | ||||
| 518-5891 J | [1] | KIT-WASHER (STANDARD) | ||
| (INCLUDES WASHERS) | ||||
| 518-5892 AB | KIT-WASHER (0.191-MM US) | |||
| (INCLUDES WASHERS) | ||||
| 518-5893 ABP | KIT-WASHER (STANDARD, 0.191-MM US) | |||
| (INCLUDES WASHERS) | ||||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| P | KIT MARKED P SERVICES PART(S) MARKED P | |||
#SEBP68280046
364-2829: CRANKSHAFT GP
364-2829 CRANKSHAFT GP
S/N C4Z1-UP
WITH SPLINE
PART OF 326-9000 CRANKSHAFT GP
Type 1
AN ATTACHMENT
S/N C4Z1-UP
WITH SPLINE
PART OF 326-9000 CRANKSHAFT GP
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 428F2 BACKHOE LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 032-9090 B | [2] | WASHER-THRUST (STANDARD-UPPER) | |
| 067-6873 AB | WASHER-THRUST (0.18-MM OS) | |||
| 2. | 032-9091 B | [2] | WASHER-THRUST (STANDARD-LOWER) | |
| 067-6874 AB | WASHER-THRUST (0.18-MM OS) | |||
| 3. | 353-2205 B | [1] | KIT-ROD BEARING | |
| 353-2206 AB | KIT-ROD BEARING (0.25-MM US) | |||
| 353-2207 AB | KIT-ROD BEARING (0.50-MM US) | |||
| 353-2208 AB | KIT-ROD BEARING (0.75-MM US) | |||
| 4. | 353-7423 B | [1] | KIT-BEARING (MAIN) | |
| 353-7424 AB | KIT-BEARING (0.25-MM US) | |||
| 353-7425 AB | KIT-BEARING (0.50-MM US) | |||
| 353-7426 AB | KIT-BEARING (0.75-MM US) | |||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
#SEBP68280047
364-2829: CRANKSHAFT GP
364-2829 CRANKSHAFT GP
S/N C4Z1-UP
WITH SPLINE
PART OF 326-9000 CRANKSHAFT GP
Type 2
AN ATTACHMENT
S/N C4Z1-UP
WITH SPLINE
PART OF 326-9000 CRANKSHAFT GP
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 428F2 BACKHOE LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 032-9090 B | [2] | WASHER-THRUST (STANDARD-UPPER) | |
| 067-6873 AB | WASHER-THRUST (0.18-MM OS) | |||
| 2. | 032-9091 B | [2] | WASHER-THRUST (STANDARD-LOWER) | |
| 067-6874 AB | WASHER-THRUST (0.18-MM OS) | |||
| 3. | 353-2205 B | [1] | KIT-ROD BEARING (STANDARD) | |
| 353-2206 AB | KIT-ROD BEARING (0.25-MM US) | |||
| 353-2207 AB | KIT-ROD BEARING (0.50-MM US) | |||
| 353-2208 AB | KIT-ROD BEARING (0.75-MM US) | |||
| 4. | 518-5437 BC | [1] | KIT-BEARING (STANDARD) | |
| 518-5440 ABC | KIT-BEARING (0.254-MM US)(0.254-MM US) | |||
| 518-5441 ABC | KIT-BEARING (0.508-MM US)(0.50-MM US) | |||
| 518-5885 ABC | KIT-BEARING (0.762-MM US)(0.75-MM US) | |||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP68280048
364-2829: CRANKSHAFT GP
364-2829 CRANKSHAFT GP
S/N C4Z1-UP
WITH SPLINE
PART OF 326-9000 CRANKSHAFT GP
Type 3
AN ATTACHMENT
S/N C4Z1-UP
WITH SPLINE
PART OF 326-9000 CRANKSHAFT GP
Type 3
AN ATTACHMENT
For full view, you need register
Parts for your 428F2 BACKHOE LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | BC | [2] | PLATE-THRUST (STANDARD)(UPPER) | |
| 518-5891 BC | [2] | KIT-WASHER (STANDARD) | ||
| 518-5892 ABC | KIT-WASHER (0.191-MM US) | |||
| 518-5893 ABC | KIT-WASHER (STANDARD, 0.191-MM US) | |||
| 2. | BC | [2] | PLATE-THRUST (STANDARD)(LOWER) | |
| 518-5891 BC | [2] | KIT-WASHER (STANDARD) | ||
| 518-5892 ABC | KIT-WASHER (0.191-MM US) | |||
| 518-5893 ABC | KIT-WASHER (STANDARD, 0.191-MM US) | |||
| 3. | 353-2205 B | [1] | KIT-ROD BEARING (STANDARD) | |
| 353-2206 AB | KIT-ROD BEARING (0.25-MM US) | |||
| 353-2207 AB | KIT-ROD BEARING (0.50-MM US) | |||
| 353-2208 AB | KIT-ROD BEARING (0.75-MM US) | |||
| 4. | 518-5437 B | [1] | KIT-BEARING (STANDARD) | |
| 518-5440 AB | KIT-BEARING (0.254-MM US)(0.254-MM US) | |||
| 518-5441 AB | KIT-BEARING (0.508-MM US)(0.50-MM US) | |||
| 518-5885 AB | KIT-BEARING (0.762-MM US)(0.75-MM US) | |||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP68280049
232-7606: CYLINDER BLOCK GP
232-7606 CYLINDER BLOCK GP
S/N CRS1-UP
PART OF 521-6420, 521-6421 ENGINE AR-PRIMARY
AN ATTACHMENT
S/N CRS1-UP
PART OF 521-6420, 521-6421 ENGINE AR-PRIMARY
AN ATTACHMENT
For full view, you need register
Information:
BASIC ENGINE
VALVE MECHANISM GP
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Disassembly and Assembly
