AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

389-9292 CONSOLE GP-OPERATOR -RH S/N LYK1-UP PART OF 398-2712 CAB AR AN ATTACHMENT 434F2 BACKHOE LOADER


OPERATOR STATION
CONSOLE GP
ELECTRICAL AND STARTING SYSTEM
WIRING GP
OPERATOR STATION
CONTROL GP-HANDLE
CONTROL GP-HYDRAULIC

BACKHOE LOADER 434F2 BACKHOE LOADER LYK
 434F2 Side Shift Backhoe Loader LYK00001-UP (MACHINE) POWERED BY C4.4 Engine SEBP6830 434F2 LYK   (2013)

OPERATOR STATION

CONSOLE GP
WIRING GP-CONSOLE
430-5026 WIRING GP-CONSOLE
CONSOLE GP-OPERATOR
389-9290 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
389-9291 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
389-9292 CONSOLE GP-OPERATOR
CONSOLE GP-REAR
399-2031 CONSOLE GP-REAR
PROTECTION GP-VANDALISM
389-9293 PROTECTION GP-VANDALISM
 

#SEBP68300810
 

389-9292: CONSOLE GP-OPERATOR

389-9292 CONSOLE GP-OPERATOR -RH
S/N LYK1-UP
PART OF 398-2712 CAB AR
AN ATTACHMENT
i05907064 SEBP6830
3899292 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 434F2 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 164-1178 [2] CLIP  
2. 167-8251 [2] FASTENER  
3. 206-1667 [10] CLIP (TRIM)  
4. 394-9525 [1] HOUSING-FRONT  
5. 394-9526 [1] PANEL  
6. 394-9527 [1] COVER-FUSE  
7. 394-9528 [1] COVER (REAR)  
8. 394-9529 [1] COVER-FRONT  
9. 394-9530 [1] COVER-CENTER  
10. 395-2936 [1] PANEL  
11. 398-3047 [1] HOUSING-REAR  
12. 399-2039 [1] COVER  
13. 437-2208 [1] FILM-IDENTIFICATION (START SWITCH, READ OMM)  
14. 454-0097 [6] CLIP  
15. 261-9639 [5] SCREW-PAN HEAD (12.0X0.5-IN)  
16. 9X-2045 M [10] SCREW-TRUSS HEAD (M6X1X20-MM)  
17. 5P-5927 D SEAL (0.02-M EACH)  
18. 251-4889 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP68300811
 

399-2031: CONSOLE GP-REAR

399-2031 CONSOLE GP-REAR
S/N LYK1-UP
PART OF 450-8690, 450-8691 CAB AR
AN ATTACHMENT
i05907643 SEBP6830
3992031 CONSOLE GP-REAR Parts scheme
  For full view, you need register

Parts for your 434F2 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 394-9502 [1] CONSOLE (LH)(REAR)  
2. 454-0097 [2] CLIP  
3. 9X-2045 M [3] SCREW-TRUSS HEAD (M6X1X20-MM)  
  M   METRIC PART
 

#SEBP68300812
 

398-2690: CONTROL AR-STABILIZER

398-2690 CONTROL AR-STABILIZER -SIDESHIFT
S/N LYK1-UP
PART OF 450-8690, 450-8691 CAB AR
AN ATTACHMENT
i05943963 SEBP6830
  For full view, you need register

Parts for your 434F2 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  397-1575 Y [1] LINES GP-STABILIZER (SIDESHIFT)  
  389-8137 Y [1] LOCK GP-TRANSPORT  
  389-3141 Y [1] VALVE GP-CONTROL (STABILIZER)  
  448-8165 [1] FILM-INFORMATION (STABILIZER CONTROL)  
    (ON RH CONSOLE NEXT TO STAB CONTROLS INSIDE CAB & CANOPIES)
  Y   SEPARATE ILLUSTRATION
 

#SEBP68300813
 

387-6560: CONTROL GP-HANDLE

387-6560 CONTROL GP-HANDLE -SINGLE TILT
S/N LYK1-UP
PART OF 388-4099 CONTROL GP-HYDRAULIC HAND
AN ATTACHMENT
i05895352 SEBP6830
3876560 CONTROL GP-HANDLE Parts scheme
  For full view, you need register

Parts for your 434F2 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 389-7279 [1] LEVER AS  
2. 440-1454 [1] BOOT  
3. 346-3533 [8] PLUG-CONNECTOR  
4. 346-3511 [1] RECEPTACLE AS (12-PIN)  
5. 346-3530 [4] SEAL-CONNECTOR  
6. 349-7370 [4] PIN-CONNECTOR  
7. 387-6655 Y [1] CONTROL GP-HANDLE (MECHANICAL)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP68300814
 

387-6655: CONTROL GP-HANDLE

387-6655 CONTROL GP-HANDLE -MECHANICAL
S/N LYK1-UP
PART OF 387-6560, 387-6680 CONTROL GP-HANDLE
AN ATTACHMENT
i05895419 SEBP6830
3876655 CONTROL GP-HANDLE Parts scheme
  For full view, you need register

Parts for your 434F2 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 346-3533 [8] PLUG-CONNECTOR  
2. 346-3511 [1] RECEPTACLE AS (12-PIN)  
3. 346-3530 [4] SEAL-CONNECTOR  
4. 349-7349 [1] LOCK-CONNECTOR  
5. 349-7370 [4] PIN-CONNECTOR  
 

#SEBP68300815
 

387-6680: CONTROL GP-HANDLE

387-6680 CONTROL GP-HANDLE -MECHANICAL
S/N LYK1-UP
PART OF 388-4100 CONTROL GP-HYDRAULIC HAND
AN ATTACHMENT
i05895417 SEBP6830
3876680 CONTROL GP-HANDLE Parts scheme
  For full view, you need register

Parts for your 434F2 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 389-7279 [1] LEVER AS  
2. 395-2916 [1] BOOT  
3. 387-6655 Y [1] CONTROL GP-HANDLE (MECHANICAL)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP68300816
 

385-6492: CONTROL GP-HYDRAULIC HAND

385-6492 CONTROL GP-HYDRAULIC HAND -UNIVERSAL
S/N LYK1-UP
PART OF 398-2495 CONTROL AR-BACKHOE
AN ATTACHMENT
i05932112 SEBP6830
3856492 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 434F2 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 164-1399 [2] KNOB (BALL)  
2. 190-5134 [2] FILM-IDENTIFICATION (STD CROSS PATTERN)  
3. 385-6495 [1] BRACKET AS  
4. 385-6505 [2] BRACKET AS  
5. 385-6509 [2] LEVER  
6. 399-5401 [1] PLATE AS  
7. 399-5402 [1] PLATE AS  
  159-9539 M [4] NUT-WELD (M6X1-THD)  
8. 417-9356 [4] TIE ROD GP  
    (EACH INCLUDES)
  8T-4133 M [2] NUT (M10X1.5-THD)  
  303-9307 [1] ROD  
  537-1973 [1] BALL JOINT  
  435-7651 [1] BALL JOINT  
9. 425-9077 [1] SEAL  
10. 430-9929 [1] FILM-WARNING (CONTROL PATTERN, READ OMM)  
11. 437-3580 [4] MOUNT  
12. 439-3495 [4] PIN  
13. 454-0097 [2] CLIP  
14. 127-2170 M [9] SCREW-TRUSS HEAD (M8X1.25X20-MM)  
15. 189-5358 M [4] BOLT (M10X1.5X60-MM)  
16. 3E-8000 M [2] NUT-JAM (M16X1.5-THD)  
17. 6V-7357 M [2] BOLT (M6X1X25-MM)  
18. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
19. 8T-4133 M [4] NUT (M10X1.5-THD)  
20. 8T-4189 M [6] BOLT (M8X1.25X20-MM)  
21. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
22. 8T-4222 [4] WASHER-PLATED (11X32X2.5-MM THK)  
23. 8T-4224 [6] WASHER-HARD (8.8X16X2-MM THK)  
24. 9R-2807 [4] CLIP (RETAINER)  
  M   METRIC PART
 

#SEBP68300817
 

388-4099: CONTROL GP-HYDRAULIC HAND

388-4099 CONTROL GP-HYDRAULIC HAND -PARALLEL LIFT
S/N LYK1-UP
PART OF 450-8559, 450-8562 VALVE AR-BANK 3, 500-7330 VALVE AR-BANK 5
AN ATTACHMENT
i05931648 SEBP6830
3884099 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 434F2 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4743 [2] PIN  
2. 164-1368 [6] FASTENER (CLIP)  
3. 206-1345 [2] STRAP-CABLE  
4. 387-6560 Y [1] CONTROL GP-HANDLE  
5. 388-7048 [1] BRACKET AS  
5A. 449-2128 [1] BUSHING  
6. 389-7230 [1] PIN  
7. 389-7232 [1] LEVER AS  
7A. [1] BUSHING  
8. 389-7244 [1] PIN  
9. 390-8024 [1] PIN AS  
10. 390-8743 [1] ROD AS  
  8T-4133 M [1] NUT (M10X1.5-THD)  
  8T-4773 [1] BALL JOINT  
  9X-2065 M [1] NUT (M10X1.5-THD, LH)  
  454-2225 [1] ROD  
  454-3053 [1] BALL JOINT  
11. 395-2917 [1] PLATE  
12. 415-2274 [1] SEAL  
13. 418-8608 [1] ROD AS  
  8T-4133 M [1] NUT (M10X1.5-THD)  
  8T-4773 [1] BALL JOINT  
  8T-4815 [1] ROD END  
  390-8747 [1] ROD  
14. 418-8609 [1] ROD AS  
  8T-4133 M [2] NUT (M10X1.5-THD)  
  8T-4815 [1] ROD END  
  390-8822 M [1] STUD (M10X1.5-MM)  
15. 430-9922 [1] FILM-INSTRUCTION (LOADER CONTROL)  
16. 454-0097 [4] CLIP  
17. 138-2042 M [2] LOCKNUT (M10X1.5-THD)  
18. [2] PLUG AS  
    (EACH INCLUDES)
  3D-2824 [1] SEAL-O-RING  
  9S-4183 [1] PLUG (1-1/16-12-THD)  
19. 170-4735 [5] RING-RETAINING  
20. 5H-3193 [1] PIN-SPRING  
21. 5P-4116 [2] WASHER-HARD (8.8X20.5X2-MM THK)  
22. 6V-7744 M [4] LOCKNUT (M10X1.5-THD)  
23. 7X-0510 [1] WASHER-HARD (15.5X29X3-MM THK)  
24. 7X-7729 [2] WASHER (11X25X3-MM THK)  
25. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
26. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
27. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP68300818
 

388-4100: CONTROL GP-HYDRAULIC HAND

388-4100 CONTROL GP-HYDRAULIC HAND -PARALLEL LIFT
S/N LYK1-UP
PART OF 450-8560, 450-8563 VALVE AR-BANK 3, 500-7329 VALVE AR-BANK 5
AN ATTACHMENT
i05927130 SEBP6830
3884100 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 434F2 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4743 [3] PIN  
2. 164-1368 [6] FASTENER (CLIP)  
3. 164-1395 [1] KNOB  
4. 206-1345 [2] STRAP-CABLE  
5. 387-6680 Y [1] CONTROL GP-HANDLE (MECHANICAL)  
6. 388-7048 [1] BRACKET AS  
6A. 449-2128 [1] BUSHING  
7. 389-7230 [1] PIN  
8. 389-7232 [1] LEVER AS  
8A. [1] BUSHING  
9. 389-7244 [1] PIN  
10. 389-7277 [1] LEVER AS  
10A. [1] BUSHING  
11. 390-8024 [1] PIN AS  
12. 390-8743 [1] ROD AS  
  8T-4133 M [1] NUT (M10X1.5-THD)  
  8T-4773 [1] BALL JOINT  
  9X-2065 M [1] NUT (M10X1.5-THD, LH)  
  454-2225 [1] ROD  
  454-3053 [1] BALL JOINT  
13. 395-2917 [1] PLATE  
14. 415-2274 [1] SEAL  
15. 418-8607 [1] ROD AS  
  8T-4133 M [1] NUT (M10X1.5-THD)  
  8T-4773 [1] BALL JOINT  
  8T-4815 [1] ROD END  
  390-8742 [1] ROD AS  
16. 418-8608 [1] ROD AS  
  8T-4133 M [1] NUT (M10X1.5-THD)  
  8T-4773 [1] BALL JOINT  
  8T-4815 [1] ROD END  
  390-8747 [1] ROD  
17. 418-8609 [1] ROD AS  
  8T-4133 M [2] NUT (M10X1.5-THD)  
  8T-4773 [1] BALL JOINT  
  8T-4185 M [1] BOLT (M10X1.5X50-MM)  
  390-8822 M [1] STUD (M10X1.5-MM)  
18. 430-9923 [1] FILM-INSTRUCTION (LOADER CONTROL)  
19. 454-0097 [4] CLIP  
20. 138-2042 M [2] LOCKNUT (M10X1.5-THD)  
21. 170-4735 [5] RING-RETAINING  
22. 5H-3193 [1] PIN-SPRING  
23. 5P-4116 [2] WASHER-HARD (8.8X20.5X2-MM THK)  
24. 6V-7744 M [4] LOCKNUT (M10X1.5-THD)  
25. 7X-0510 [1] WASHER-HARD (15.5X29X3-MM THK)  
26. 7X-7729 [2] WASHER (11X25X3-MM THK)  
27. 8T-4121 [5] WASHER-HARD (11X21X2.5-MM THK)  
28. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
29. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP68300819
 

389-1296: CONTROL GP-HYDRAULIC HAND

389-1296 CONTROL GP-HYDRAULIC HAND -EXCAVATOR
S/N LYK1-UP
PART OF 398-2497 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i05891789 SEBP6830
3891296 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 434F2 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-5381 [2] PIN AS-SPRING  
2. 164-1399 [2] KNOB  
3. 164-1435 [2] PLATE  
4. 170-6312 [4] BEARING  
5. 390-7515 [1] TOWER AS  
  159-9541 M [2] NUT-WELD (M10X1.5-THD)  
6. 391-1293 [1] SHAFT  
7. 391-5422 [1] LEVER AS (LH)  
7A. 164-1436 [1] BEARING  
8. 391-5423 [1] LEVER AS (RH)  
8A. 164-1436 [1] BEARING  
9. 398-8074 [1] ROD AS  
10. 399-5401 [1] PLATE AS  
11. 399-5402 [1] PLATE AS  
  159-9539 M [4] NUT-WELD (M6X1-THD)  
12. 418-8515 [1] ROD AS  
  8T-4133 M [2] NUT (M10X1.5-THD)  
  8T-5063 [1] ROD END  
  435-7651 [1] BALL JOINT  
  446-8059 [1] ROD  
13. 418-8517 [2] ROD AS  
    (EACH INCLUDES)
  8T-4133 M [1] NUT (M10X1.5-THD)  
  391-2709 [1] ROD AS  
  [1] BALL JOINT  
14. 426-0313 [1] SEAL  
15. 430-9927 [1] FILM-IDENTIFICATION (EXCAVATOR CONTROL)  
16. 437-3580 [4] MOUNT  
17. 439-3492 [1] ROD AS  
  8T-4133 M [2] NUT (M10X1.5-THD)  
  8T-5063 [1] ROD END  
  435-7651 [1] BALL JOINT  
  439-3493 [1] ROD  
18. 439-3495 [4] PIN  
19. 439-3496 [2] BRACKET AS  
    (EACH INCLUDES)
19A. 385-6511 [2] BUSHING  
20. 439-4932 [1] ROD AS  
21. 440-3614 [1] BOSS  
22. 454-0097 [2] CLIP  
23. 127-2170 M [9] SCREW-TRUSS HEAD (M8X1.25X20-MM)  
24. 164-1402 [2] SLEEVE  
25. 164-1404 [2] SPACER (10.67X16.95X23-MM THK)  
26. 5C-2890 M [6] NUT (M6X1-THD)  
27. 6V-3964 [1] WASHER-HARD (8.8X25.5X5-MM THK)  
28. 6V-9824 [3] RING-RETAINING  
29. 7X-2537 M [1] BOLT (M8X1.25X35-MM)  
30. 7X-7729 [10] WASHER (11X25X3-MM THK)  
31. 8T-0389 M [10] LOCKNUT (M10X1.5-THD)  
32. 8T-4121 [10] WASHER-HARD (11X21X2.5-MM THK)  
33. 8T-4138 M [6] BOLT (M6X1X20-MM)  
34. 8T-4172 M [2] BOLT (M10X1.5X80-MM)  
35. 8T-4205 [6] WASHER-HARD (7.2X14.5X2-MM THK)  
36. 8T-4222 [4] WASHER-PLATED (11X32X2.5-MM THK)  
37. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
38. 8T-4908 M [1] BOLT (M8X1.25X25-MM)  
39. 189-5358 M [4] BOLT (M10X1.5X60-MM)  
40. 8T-6466 M [2] BOLT (M10X1.5X60-MM)  
41. 9R-2807 [4] CLIP (RETAINER)  
42. 8T-4133 M [4] NUT (M10X1.5-THD)  
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog 434F2 :

CONSOLE GP-OPERATOR
389-9291 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
389-9290 CONSOLE GP-OPERATOR
CONDENSER & MTG GP-REFRIGERANT
337-9765 CONDENSER & MTG GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
432-5235 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
395-2123 COMPRESSOR GP-REFRIGERANT
CAB GP
535-8677 CAB GP
CAB GP
382-2352 CAB GP
CAB GP
382-2206 CAB GP
CONSOLE GP-REAR
399-2031 CONSOLE GP-REAR
398-2690 CONTROL AR-STABILIZER
CONTROL GP-HANDLE
387-6560 CONTROL GP-HANDLE
CONTROL GP-HANDLE
387-6655 CONTROL GP-HANDLE
CONTROL GP-HANDLE
387-6680 CONTROL GP-HANDLE
CONTROL GP-HYDRAULIC HAND
385-6492 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
388-4099 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
388-4100 CONTROL GP-HYDRAULIC HAND
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.