AVSPARE.COM
parts catalog

416F2 Center Pivot Backhoe Loader HWB00001-UP (MACHINE) POWERED BY C4.4 Engine POWER TRAIN Caterpillar SIS




Parts group 416F2:

  For full view, you need register
POWER TRAIN

Information:

(For parts list, see above)

Special Instruction
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Operation and Maintenance Manual
Differential Oil (Front) - Change
416F2, 420F2 and 430F2 Backhoe Loaders
Differential Oil Level (Front) - Check
416F2, 420F2 and 430F2 Backhoe Loaders
Final Drive Oil (Front) - Change
416F2, 420F2 and 430F2 Backhoe Loaders
Final Drive Oil Level (Front) - Check
416F2, 420F2 and 430F2 Backhoe Loaders
Differential Oil Sample (Front) - Obtain
416F2, 420F2 and 430F2 Backhoe Loaders
Final Drive Oil Sample (Front) - Obtain
416F2, 420F2 and 430F2 Backhoe Loaders
Final Drive Oil (Rear) - Change
416F2, 420F2 and 430F2 Backhoe Loaders
Final Drive Oil Level (Rear) - Check
416F2, 420F2 and 430F2 Backhoe Loaders
Final Drive Oil Sample (Rear) - Obtain
416F2, 420F2 and 430F2 Backhoe Loaders
Differential Oil (Rear) - Change
416F2, 420F2 and 430F2 Backhoe Loaders
Differential Oil Level (Rear) - Check
416F2, 420F2 and 430F2 Backhoe Loaders
Axle Breathers - Clean/Replace
416F2, 420F2 and 430F2 Backhoe Loaders
Differential Oil Sample (Rear) - Obtain
416F2, 420F2 and 430F2 Backhoe Loaders
Special Instruction
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT AXLE RETAINING PIN BOLTED JOINT ON CERTAIN F AND F2 SERIES BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT AXLE RETAINING PIN BOLTED JOINT ON CERTAIN F AND F2 SERIES BACKHOE LOADERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Oil Leak From Rear Axle Pinion Drive Seal May Be Assembly Grease on Certain Backhoe Loaders {3256, 3260, 3284}
Oil Leak From Rear Axle Pinion Drive Seal May Be Assembly Grease on Certain Backhoe Loaders {3256, 3260, 3284}
Specifications
Axle (Rear)
415F2, 416F2, 420F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Axles, Differential and Brakes
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT AXLE RETAINING PIN BOLTED JOINT ON CERTAIN F AND F2 SERIES BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT AXLE RETAINING PIN BOLTED JOINT ON CERTAIN F AND F2 SERIES BACKHOE LOADERS
Service Letter-Asia
Systems Operation
Axle (Rear)
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Axles, Differential and Brakes
Differential (Standard)
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Axles, Differential and Brakes
Differential Lock - If Equipped
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Axles, Differential and Brakes
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT AXLE RETAINING PIN BOLTED JOINT ON CERTAIN F AND F2 SERIES BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT AXLE RETAINING PIN BOLTED JOINT ON CERTAIN F AND F2 SERIES BACKHOE LOADERS
Testing and Adjusting
Axle (Front) - Adjust
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Axles, Differential and Brakes
Brake System Air - Purge
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Axles, Differential and Brakes
Axle Housing and Bearing Preload - Adjust
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Axles, Differential and Brakes
Disassembly and Assembly
Tie Rod (Steering)(Front) - Remove and Install
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train
Final Drive Planetary - Remove and Install - Rear
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train
Final Drive Planetary - Remove and Install - Front
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train
Steering Cylinder (Front) - Remove and Install
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train
Drive and Steering Axle (Front) - Remove
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train
Axle Housing and Flange - Remove
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train
Axle Housing and Flange - Disassemble
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train
Axle Housing and Flange - Assemble
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train
Axle Housing and Flange - Install
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train
Axle Shaft - Remove and Install
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train
Axle Housing (Differential and Bevel Gear) (Front) - Remove and Install
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train
Axle Housing (Differential and Bevel Gear) (Front) - Disassemble
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train
Axle Housing (Differential and Bevel Gear) (Front) - Assemble
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train
Drive and Steering Axle (Front) - Install
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train
Parking Brake - Remove and Install
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train
Rear Axle - Remove
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train
Axle Housing, Axle Shaft, and Wheel Flange - Remove
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train
Axle Housing, Axle Shaft, and Wheel Flange - Disassemble
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train
Axle Housing (Service Brakes, Differential and Bevel Gear) - Disassemble
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train
Axle Housing (Service Brakes, Differential and Bevel Gear) - Assemble
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train
Axle Housing, Axle Shaft, and Wheel Flange - Assemble
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train
Rear Axle - Install
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train
Axle Housing, Axle Shaft, and Wheel Flange - Install
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train
Service Magazine
A Correction to Spacers for Installing Tire Chains on the Rear Wheels of Backhoe Loaders Are Now Available {3259, 3278, 4201}
A Correction to Spacers for Installing Tire Chains on the Rear Wheels of Backhoe Loaders Are Now Available {3259, 3278, 4201}
Rear Axle Differential Has Been Improved On Certain Backhoe Loaders {3278, 3282}
Rear Axle Differential Has Been Improved On Certain Backhoe Loaders {3278, 3282}
New Front Axle Pin Assembly Is Now Used on Certain F2 Series Backhoe Loaders {3020, 3268, 3282, 4313}
New Front Axle Pin Assembly Is Now Used on Certain F2 Series Backhoe Loaders {3020, 3268, 3282, 4313}
An Improved Paint Masking Process Is Now Used on the Front Axle Steering Cylinders for Certain Backhoe Loaders {4303, 4313}
An Improved Paint Masking Process Is Now Used on the Front Axle Steering Cylinders for Certain Backhoe Loaders {4303, 4313}
Updated Pin Assemblies for Axle Mounting Group are Now Used on Certain Backhoe Loaders {3268}
Updated Pin Assemblies for Axle Mounting Group are Now Used on Certain Backhoe Loaders {3268}
Front Axle Mounting Pin Assembly Has Been Improved on Certain F2 Series Backhoe Loaders {3268}
Front Axle Mounting Pin Assembly Has Been Improved on Certain F2 Series Backhoe Loaders {3268}
Systems Operation
Axle (Rear)
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Axles, Differential and Brakes
Disassembly and Assembly
Rear Axle - Remove
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train
Rear Axle - Install
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train
Reuse And Salvage Guidelines
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Systems Operation
Differential Lock - If Equipped
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Axles, Differential and Brakes
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR INSTALLING A PROTECTION GUARD OVER THE ALL WHEEL DRIVE SOLENOID ON CERTAIN F2 SERIES BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A PROTECTION GUARD OVER THE ALL WHEEL DRIVE SOLENOID ON CERTAIN F2 SERIES BACKHOE LOADERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-China
Service Letter-Asia
Service Letter-APD
Bench Test Procedures
Bench Test Procedure for a 415F2, 416F2, 420F2, 422F2, 427F2, 428F2, 430F2, 432F2, and 434F2 Backhoe Loader Standard Shift Transmission {3030, 3065, 3073, 3167}
Bench Test Procedure for a 415F2, 416F2, 420F2, 422F2, 427F2, 428F2, 430F2, 432F2, and 434F2 Backhoe Loader Standard Shift Transmission {3030, 3065, 3073, 3167}
Service Magazine
New Protection Cover for Solenoid Valve Group Is Now Used on Certain Backhoe Loaders {3073, 3167}
New Protection Cover for Solenoid Valve Group Is Now Used on Certain Backhoe Loaders {3073, 3167}
An Improved Manufacturing Process in the Gear Shift Group is Now Used on Certain Backhoe Loaders {3065}
An Improved Manufacturing Process in the Gear Shift Group is Now Used on Certain Backhoe Loaders {3065}
Specifications
Flexible Coupling Drive
415F2, 415F2 IL, 416F2, 420F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Transmission (Standard Shift)
Special Instruction
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR DRIVE AXLE ON CERTAIN 415F2, 416E, 416F, 416F2, 420F, 420F2, 430F, AND 430F2 BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR DRIVE AXLE ON CERTAIN 415F2, 416E, 416F, 416F2, 420F, 420F2, 430F, AND 430F2 BACKHOE LOADERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Oil Leak From Rear Axle Pinion Drive Seal May Be Assembly Grease on Certain Backhoe Loaders {3256, 3260, 3284}
Oil Leak From Rear Axle Pinion Drive Seal May Be Assembly Grease on Certain Backhoe Loaders {3256, 3260, 3284}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR DRIVE AXLE ON CERTAIN 415F2, 416E, 416F, 416F2, 420F, 420F2, 430F, AND 430F2 BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR DRIVE AXLE ON CERTAIN 415F2, 416E, 416F, 416F2, 420F, 420F2, 430F, AND 430F2 BACKHOE LOADERS
Service Letter-Asia
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR DRIVE AXLE ON CERTAIN 415F2, 416E, 416F, 416F2, 420F, 420F2, 430F, AND 430F2 BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR DRIVE AXLE ON CERTAIN 415F2, 416E, 416F, 416F2, 420F, 420F2, 430F, AND 430F2 BACKHOE LOADERS
Testing and Adjusting
Differential Pinion Bearing - Adjust
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Axles, Differential and Brakes
Differential Backlash and Bearings - Adjust
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Axles, Differential and Brakes
Disassembly and Assembly
Axle Housing (Differential and Bevel Gear) (Front) - Remove and Install
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train
Axle Housing (Differential and Bevel Gear) (Front) - Disassemble
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train
Axle Housing (Differential and Bevel Gear) (Front) - Assemble
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train
Axle Housing (Service Brakes, Differential and Bevel Gear) - Disassemble
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train
Axle Housing (Service Brakes, Differential and Bevel Gear) - Assemble
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train
Operation and Maintenance Manual
Differential Oil (Front) - Change
416F2, 420F2 and 430F2 Backhoe Loaders
Differential Oil Level (Front) - Check
416F2, 420F2 and 430F2 Backhoe Loaders
Differential Oil Sample (Front) - Obtain
416F2, 420F2 and 430F2 Backhoe Loaders
Differential Oil (Rear) - Change
416F2, 420F2 and 430F2 Backhoe Loaders
Differential Oil Level (Rear) - Check
416F2, 420F2 and 430F2 Backhoe Loaders
Differential Oil Sample (Rear) - Obtain
416F2, 420F2 and 430F2 Backhoe Loaders
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR DRIVE AXLE ON CERTAIN 415F2, 416E, 416F, 416F2, 420F, 420F2, 430F, AND 430F2 BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR DRIVE AXLE ON CERTAIN 415F2, 416E, 416F, 416F2, 420F, 420F2, 430F, AND 430F2 BACKHOE LOADERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-China
Service Letter-Asia
Systems Operation
Differential (Standard)
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Axles, Differential and Brakes
Reuse And Salvage Guidelines
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Contamination Control Guidelines
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR DRIVE AXLE ON CERTAIN 415F2, 416E, 416F, 416F2, 420F, 420F2, 430F, AND 430F2 BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR DRIVE AXLE ON CERTAIN 415F2, 416E, 416F, 416F2, 420F, 420F2, 430F, AND 430F2 BACKHOE LOADERS
Disassembly and Assembly
Axle Housing (Differential and Bevel Gear) (Front) - Remove and Install
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train
Specifications
Flexible Coupling Drive
415F2, 415F2 IL, 416F2, 420F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Transmission (Standard Shift)
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Operation and Maintenance Manual
Transmission Oil Level - Check
416F2, 420F2 and 430F2 Backhoe Loaders
Transmission Oil - Change
416F2, 420F2 and 430F2 Backhoe Loaders
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Operation and Maintenance Manual
Oil Filter - Inspect
416F2, 420F2 and 430F2 Backhoe Loaders
Transmission Oil Filter - Replace
416F2, 420F2 and 430F2 Backhoe Loaders
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Service Magazine
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Special Instruction
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Reuse And Salvage Guidelines
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Special Instruction
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR INSTALLING THE 391-8172 PLUG ON CERTAIN 415F2, 416F2, 420F2, 422F2, 428F2, 430F2, AND 432F2 BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING THE 391-8172 PLUG ON CERTAIN 415F2, 416F2, 420F2, 422F2, 428F2, 430F2, AND 432F2 BACKHOE LOADERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Missing Transmission Plug on Certain F2 Series Backhoe Loaders {3016}
Missing Transmission Plug on Certain F2 Series Backhoe Loaders {3016}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR INSTALLING THE 391-8172 PLUG ON CERTAIN 415F2, 416F2, 420F2, 422F2, 428F2, 430F2, AND 432F2 BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING THE 391-8172 PLUG ON CERTAIN 415F2, 416F2, 420F2, 422F2, 428F2, 430F2, AND 432F2 BACKHOE LOADERS
Service Letter-Asia
Service Letter-APD
Specifications
Check Valve
415F2, 416F2, 420F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Hydraulic and Steering System
Reuse And Salvage Guidelines
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Special Instruction
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Specifications
Transmission Oil Pump
415F2, 415F2 IL, 416F2, 420F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Transmission (Standard Shift)
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Disassembly and Assembly
Transmission (Power Shift) - Remove
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train
Transmission (Power Shift) - Disassemble
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train
Transmission (Power Shift) - Assemble
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train
Transmission (Power Shift) - Install
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train
Transmission (Direct Drive) - Remove
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train
Transmission (Direct Drive) - Install
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train
Transmission (Direct Drive) - Disassemble
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train
Transmission (Direct Drive) - Assemble
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train
Special Instruction
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Technical Information Bulletin
Main Drive Shaft Universal Joint Retaining Straps May Become Loose or Break on Certain Backhoe Loaders {3253}
Main Drive Shaft Universal Joint Retaining Straps May Become Loose or Break on Certain Backhoe Loaders {3253}
Specifications
Drive Shaft
415F2, 416F2, 420F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Axles, Differential and Brakes
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Disassembly and Assembly
Drive Shaft (Front) - Remove and Install
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train
Drive Shaft (Rear) - Remove and Install
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train
Service Magazine
Manufacturing Process for the Standard Shift Transmission Synchronizer Sleeve Has Been Improved on Certain Backhoe Loaders {3030, 3053, 3063}
Manufacturing Process for the Standard Shift Transmission Synchronizer Sleeve Has Been Improved on Certain Backhoe Loaders {3030, 3053, 3063}
Reuse And Salvage Guidelines
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Special Instruction
Rim Inspection Guidelines {4202, 4209}
Rim Inspection Guidelines {4202, 4209}
Hose Inspection Form {0374, 0599, 5057, 5057}
Hose Inspection Form {0374, 0599, 5057, 5057}
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Contamination Control Guidelines
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Turbine Wheel for Torque Converters Used with Power Shift Transmissions {3101, 3131}
Turbine Wheel for Torque Converters Used with Power Shift Transmissions {3101, 3131}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Thermal Spray Procedures for Torque Converter Turbine Wheel {0679, 3101, 3131}
Thermal Spray Procedures for Torque Converter Turbine Wheel {0679, 3101, 3131}
Thermal Spray Procedures for Torque Converter Impeller {0679, 3101, 3134}
Thermal Spray Procedures for Torque Converter Impeller {0679, 3101, 3134}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Testing and Adjusting
Power Train Troubleshooting
415F2, 415F2 IL, 416F2, 420F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Transmission (Standard Shift)
Pressure Taps - Standard Shift
415F2, 415F2 IL, 416F2, 420F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Transmission (Standard Shift)
Transmission and Torque Converter - Test
415F2, 415F2 IL, 416F2, 420F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Transmission (Standard Shift)
Bench Test Procedures
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Reuse And Salvage Guidelines
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Operation and Maintenance Manual
Transmission Oil Sample - Obtain
416F2, 420F2 and 430F2 Backhoe Loaders
Transmission Oil Level - Check
416F2, 420F2 and 430F2 Backhoe Loaders
Transmission Magnetic Screen - Clean
416F2, 420F2 and 430F2 Backhoe Loaders
Transmission Oil - Change
416F2, 420F2 and 430F2 Backhoe Loaders
Technical Information Bulletin
Transmission Fluid Temperature Warning Light May Indicate High Fluid Temperature on Certain F and F2 Series Backhoe Loaders {3030}
Transmission Fluid Temperature Warning Light May Indicate High Fluid Temperature on Certain F and F2 Series Backhoe Loaders {3030}
Specifications
Torque Converter
415F2, 415F2 IL, 416F2, 420F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Transmission (Standard Shift)
Transmission (Standard Shift)
415F2, 415F2 IL, 416F2, 420F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Transmission (Standard Shift)
Transmission (Standard Shift)
415F2, 415F2 IL, 416F2, 420F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Transmission (Standard Shift)
Transmission Case
415F2, 415F2 IL, 416F2, 420F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Transmission (Standard Shift)
Transmission Case
415F2, 415F2 IL, 416F2, 420F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Transmission (Standard Shift)
Transmission Case
415F2, 415F2 IL, 416F2, 420F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Transmission (Standard Shift)
Transmission Oil Pump
415F2, 415F2 IL, 416F2, 420F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Transmission (Standard Shift)
Check Valve
415F2, 416F2, 420F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Hydraulic and Steering System
Transmission Case
415F2, 415F2 IL, 416F2, 420F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Transmission (Standard Shift)
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Systems Operation
Torque Converter
415F2, 415F2 IL, 416F2, 420F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Transmission (Standard Shift)
Transmission (Two-Wheel Drive)
415F2, 415F2 IL, 416F2, 420F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Transmission (Standard Shift)
Transmission (All-Wheel Drive)
415F2, 415F2 IL, 416F2, 420F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Transmission (Standard Shift)
Transmission Hydraulic System
415F2, 415F2 IL, 416F2, 420F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Transmission (Standard Shift)
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Reuse and Salvage of Transmission Components {3030}
Reuse and Salvage of Transmission Components {3030}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Testing and Adjusting
Power Train Troubleshooting
415F2, 415F2 IL, 416F2, 420F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Transmission (Standard Shift)
Pressure Taps - Standard Shift
415F2, 415F2 IL, 416F2, 420F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Transmission (Standard Shift)
Transmission and Torque Converter - Test
415F2, 415F2 IL, 416F2, 420F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Transmission (Standard Shift)
Bench Test Procedures
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Bench Test Procedure for a 415F2, 416F2, 420F2, 422F2, 427F2, 428F2, 430F2, 432F2, and 434F2 Backhoe Loader Standard Shift Transmission {3030, 3065, 3073, 3167}
Bench Test Procedure for a 415F2, 416F2, 420F2, 422F2, 427F2, 428F2, 430F2, 432F2, and 434F2 Backhoe Loader Standard Shift Transmission {3030, 3065, 3073, 3167}
Disassembly and Assembly
Transmission (Power Shift) - Remove
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train
Transmission (Power Shift) - Disassemble
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train
Transmission (Power Shift) - Assemble
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train
Transmission (Power Shift) - Install
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train
Transmission (Direct Drive) - Remove
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train
Transmission (Direct Drive) - Install
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train
Transmission (Direct Drive) - Disassemble
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train
Transmission (Direct Drive) - Assemble
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train
Service Magazine
New Transmission Output Seal Now Used on Certain Backhoe Loaders, Telehandlers, and Transmissions {3030}
New Transmission Output Seal Now Used on Certain Backhoe Loaders, Telehandlers, and Transmissions {3030}
Bolt and Washer Improving Transmission Yoke Retention Are Now Used on Certain Backhoe Loaders {3030}
Bolt and Washer Improving Transmission Yoke Retention Are Now Used on Certain Backhoe Loaders {3030}
Manufacturing Process for the Standard Shift Transmission Synchronizer Sleeve Has Been Improved on Certain Backhoe Loaders {3030, 3053, 3063}
Manufacturing Process for the Standard Shift Transmission Synchronizer Sleeve Has Been Improved on Certain Backhoe Loaders {3030, 3053, 3063}
Specifications
Check Valve
415F2, 416F2, 420F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Hydraulic and Steering System
Operation and Maintenance Manual
Differential Oil Sample (Front) - Obtain
416F2, 420F2 and 430F2 Backhoe Loaders
Final Drive Oil Sample (Front) - Obtain
416F2, 420F2 and 430F2 Backhoe Loaders
Final Drive Oil Sample (Rear) - Obtain
416F2, 420F2 and 430F2 Backhoe Loaders
Differential Oil Sample (Rear) - Obtain
416F2, 420F2 and 430F2 Backhoe Loaders
Transmission Oil Sample - Obtain
416F2, 420F2 and 430F2 Backhoe Loaders
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Reuse And Salvage Guidelines
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Bench Test Procedures
Specifications
Solenoid Valve (Standard Shift)
415F2, 415F2 IL, 416F2, 420F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Transmission (Standard Shift)
Disassembly and Assembly
Solenoid Valve (Transmission) - Remove and Install
415F2, 416F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Power Train
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR INSTALLING A PROTECTION GUARD OVER THE ALL WHEEL DRIVE SOLENOID ON CERTAIN F2 SERIES BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A PROTECTION GUARD OVER THE ALL WHEEL DRIVE SOLENOID ON CERTAIN F2 SERIES BACKHOE LOADERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-China
Service Letter-Asia
Service Letter-APD
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. CatĀ® and CaterpillarĀ® are registered trademarks of Caterpillar, Inc.