AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

387-6560 CONTROL GP-HANDLE -SINGLE TILT S/N HWB1-UP PART OF 389-8124 CONTROL GP-HYDRAULIC HAND Type 1 AN ATTACHMENT 416F2


OPERATOR STATION
CONTROL GP-HANDLE
CONTROL GP-HYDRAULIC

BACKHOE LOADER 416F2 BACKHOE LOADER HWB
 416F2 Center Pivot Backhoe Loader HWB00001-UP (MACHINE) POWERED BY C4.4 Engine SEBP6833 416F2 HWB   (2013)

OPERATOR STATION

CONTROL GP-HANDLE
CONTROL GP-HANDLE
387-6560 CONTROL GP-HANDLE
CONTROL GP-HANDLE
387-6560 CONTROL GP-HANDLE
CONTROL GP-HANDLE
387-6655 CONTROL GP-HANDLE
CONTROL GP-HANDLE
387-6680 CONTROL GP-HANDLE
CONTROL GP-HANDLE
387-6680 CONTROL GP-HANDLE
 

#SEBP68330790
 

387-6560: CONTROL GP-HANDLE

387-6560 CONTROL GP-HANDLE -SINGLE TILT
S/N HWB1-UP
PART OF 389-8124 CONTROL GP-HYDRAULIC HAND
Type 1
AN ATTACHMENT
i05895352 SEBP6833
3876560 CONTROL GP-HANDLE Parts scheme
  For full view, you need register

Parts for your 416F2 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 389-7279 [1] LEVER AS  
2. 440-1454 [1] BOOT  
3. 346-3533 [8] PLUG-CONNECTOR  
4. 346-3511 [1] RECEPTACLE AS (12-PIN)  
5. 346-3530 [4] SEAL-CONNECTOR  
6. 349-7370 [4] PIN-CONNECTOR  
7. 387-6655 Y [1] CONTROL GP-HANDLE (MECHANICAL)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP68330791
 

387-6560: CONTROL GP-HANDLE

387-6560 CONTROL GP-HANDLE -SINGLE TILT
S/N HWB1-UP
PART OF 389-8124 CONTROL GP-HYDRAULIC HAND
Type 2
AN ATTACHMENT
i07693690 SEBP6833
3876560 CONTROL GP-HANDLE Parts scheme
  For full view, you need register

Parts for your 416F2 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 389-7279 [1] LEVER AS  
1A. [2] BUSHING  
2. 440-1454 [1] BOOT  
3. 346-3533 [8] PLUG-CONNECTOR  
4. 346-3511 [1] RECEPTACLE AS (12-PIN)  
5. 365-5916 C [1] TERMINAL AS  
  346-3532 [1] SEAL-CONNECTOR  
  6A-3361 BJ WIRE-ELECTRICAL (16-GA)(2-DM)  
6. 387-6655 Y [1] CONTROL GP-HANDLE (MECHANICAL)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  J   ORDER BY THE DECIMETER
  Y   SEPARATE ILLUSTRATION
 

#SEBP68330792
 

387-6655: CONTROL GP-HANDLE

387-6655 CONTROL GP-HANDLE -MECHANICAL
S/N HWB1-UP
PART OF 387-6560, 387-6680 CONTROL GP-HANDLE
AN ATTACHMENT
i05895419 SEBP6833
3876655 CONTROL GP-HANDLE Parts scheme
  For full view, you need register

Parts for your 416F2 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 346-3533 [8] PLUG-CONNECTOR  
2. 346-3511 [1] RECEPTACLE AS (12-PIN)  
3. 346-3530 [4] SEAL-CONNECTOR  
4. 349-7349 [1] LOCK-CONNECTOR  
5. 349-7370 [4] PIN-CONNECTOR  
 

#SEBP68330793
 

387-6680: CONTROL GP-HANDLE

387-6680 CONTROL GP-HANDLE -MECHANICAL
S/N HWB1-UP
PART OF 389-8125 CONTROL GP-HYDRAULIC HAND
Type 1
AN ATTACHMENT
i05895417 SEBP6833
3876680 CONTROL GP-HANDLE Parts scheme
  For full view, you need register

Parts for your 416F2 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 389-7279 [1] LEVER AS  
2. 395-2916 [1] BOOT  
3. 387-6655 Y [1] CONTROL GP-HANDLE (MECHANICAL)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP68330794
 

387-6680: CONTROL GP-HANDLE

387-6680 CONTROL GP-HANDLE -MECHANICAL
S/N HWB1-UP
PART OF 389-8125 CONTROL GP-HYDRAULIC HAND
Type 2
AN ATTACHMENT
i07693701 SEBP6833
3876680 CONTROL GP-HANDLE Parts scheme
  For full view, you need register

Parts for your 416F2 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 389-7279 [1] LEVER AS  
1A. [2] BUSHING  
2. 395-2916 [1] BOOT  
3. 346-3533 [8] PLUG-CONNECTOR  
4. 346-3511 [1] RECEPTACLE AS (12-PIN)  
5. 365-5916 C [1] TERMINAL AS  
  346-3532 [1] SEAL-CONNECTOR  
  6A-3361 BJ WIRE-ELECTRICAL (16-GA)  
6. 387-6655 Y [1] CONTROL GP-HANDLE (MECHANICAL)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  J   ORDER BY THE DECIMETER
  Y   SEPARATE ILLUSTRATION
 

#SEBP68330795
 

389-1296: CONTROL GP-HYDRAULIC HAND

389-1296 CONTROL GP-HYDRAULIC HAND -EXCAVATOR
S/N HWB1-UP
PART OF 398-2497 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i05891789 SEBP6833
3891296 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 416F2 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-5381 [2] PIN AS-SPRING  
2. 164-1399 [2] KNOB  
3. 164-1435 [2] PLATE  
4. 170-6312 [4] BEARING  
5. 390-7515 [1] TOWER AS  
  159-9541 M [2] NUT-WELD (M10X1.5-THD)  
6. 391-1293 [1] SHAFT  
7. 391-5422 [1] LEVER AS (LH)  
7A. 164-1436 [1] BEARING  
8. 391-5423 [1] LEVER AS (RH)  
8A. 164-1436 [1] BEARING  
9. 398-8074 [1] ROD AS  
10. 399-5401 [1] PLATE AS  
11. 399-5402 [1] PLATE AS  
  159-9539 M [4] NUT-WELD (M6X1-THD)  
12. 418-8515 [1] ROD AS  
  8T-4133 M [2] NUT (M10X1.5-THD)  
  8T-5063 [1] ROD END  
  435-7651 [1] BALL JOINT  
  446-8059 [1] ROD  
13. 418-8517 [2] ROD AS  
    (EACH INCLUDES)
  8T-4133 M [1] NUT (M10X1.5-THD)  
  391-2709 [1] ROD AS  
  [1] BALL JOINT  
14. 426-0313 [1] SEAL  
15. 430-9927 [1] FILM-IDENTIFICATION (EXCAVATOR CONTROL)  
16. 437-3580 [4] MOUNT  
17. 439-3492 [1] ROD AS  
  8T-4133 M [2] NUT (M10X1.5-THD)  
  8T-5063 [1] ROD END  
  435-7651 [1] BALL JOINT  
  439-3493 [1] ROD  
18. 439-3495 [4] PIN  
19. 439-3496 [2] BRACKET AS  
    (EACH INCLUDES)
19A. 385-6511 [2] BUSHING  
20. 439-4932 [1] ROD AS  
21. 440-3614 [1] BOSS  
22. 454-0097 [2] CLIP  
23. 127-2170 M [9] SCREW-TRUSS HEAD (M8X1.25X20-MM)  
24. 164-1402 [2] SLEEVE  
25. 164-1404 [2] SPACER (10.67X16.95X23-MM THK)  
26. 5C-2890 M [6] NUT (M6X1-THD)  
27. 6V-3964 [1] WASHER-HARD (8.8X25.5X5-MM THK)  
28. 6V-9824 [3] RING-RETAINING  
29. 7X-2537 M [1] BOLT (M8X1.25X35-MM)  
30. 7X-7729 [10] WASHER (11X25X3-MM THK)  
31. 8T-0389 M [10] LOCKNUT (M10X1.5-THD)  
32. 8T-4121 [10] WASHER-HARD (11X21X2.5-MM THK)  
33. 8T-4138 M [6] BOLT (M6X1X20-MM)  
34. 8T-4172 M [2] BOLT (M10X1.5X80-MM)  
35. 8T-4205 [6] WASHER-HARD (7.2X14.5X2-MM THK)  
36. 8T-4222 [4] WASHER-PLATED (11X32X2.5-MM THK)  
37. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
38. 8T-4908 M [1] BOLT (M8X1.25X25-MM)  
39. 189-5358 M [4] BOLT (M10X1.5X60-MM)  
40. 8T-6466 M [2] BOLT (M10X1.5X60-MM)  
41. 9R-2807 [4] CLIP (RETAINER)  
42. 8T-4133 M [4] NUT (M10X1.5-THD)  
  M   METRIC PART
 

#SEBP68330796
 

389-8124: CONTROL GP-HYDRAULIC HAND

389-8124 CONTROL GP-HYDRAULIC HAND -SINGLE TILT
S/N HWB1-UP
PART OF 450-8510, 450-8511, 450-8512 VALVE AR-BANK 2, 450-8516 VALVE AR-BANK 4, 450-8518 VALVE AR-BANK 5, 450-8519 VALVE AR-BANK 6
AN ATTACHMENT
i05895325 SEBP6833
3898124 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 416F2 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4743 [2] PIN  
2. 164-1368 [6] FASTENER (CLIP)  
3. 206-1345 [2] STRAP-CABLE  
4. 387-6560 Y [1] CONTROL GP-HANDLE  
5. 388-7048 [1] BRACKET AS  
5A. 449-2128 [1] BUSHING  
6. 389-7230 [1] PIN  
7. 389-7232 [1] LEVER AS  
7A. [1] BUSHING  
8. 389-7244 [1] PIN  
9. 390-8024 [1] PIN AS  
10. 390-8743 [1] ROD AS  
  8T-4133 M [1] NUT (M10X1.5-THD)  
  8T-4773 [1] BALL JOINT  
  9X-2065 M [1] NUT (M10X1.5-THD, LH)  
  454-2225 [1] ROD  
  454-3053 [1] BALL JOINT  
11. 395-2917 [1] PLATE  
12. 415-2274 [1] SEAL  
13. 418-8609 [1] ROD AS  
  8T-4133 M [2] NUT (M10X1.5-THD)  
  8T-4773 [1] BALL JOINT  
  8T-4815 [1] ROD END  
  390-8822 M [1] STUD (M10X1.5-MM)  
14. 423-2610 Y [1] ROD GP  
15. 430-9922 [1] FILM-INSTRUCTION (LOADER CONTROL)  
16. 454-0097 [4] CLIP  
17. 138-2042 M [2] LOCKNUT (M10X1.5-THD)  
18. 170-4735 [5] RING-RETAINING  
19. 5H-3193 [1] PIN-SPRING  
20. 5P-4116 [2] WASHER-HARD (8.8X20.5X2-MM THK)  
21. 6V-7744 M [4] LOCKNUT (M10X1.5-THD)  
22. 7X-0510 [1] WASHER-HARD (15.5X29X3-MM THK)  
23. 7X-7729 [2] WASHER (11X25X3-MM THK)  
24. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
25. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
26. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP68330797
 

389-8125: CONTROL GP-HYDRAULIC HAND

389-8125 CONTROL GP-HYDRAULIC HAND -SINGLE TILT
S/N HWB1-UP
PART OF 450-8513, 450-8514, 450-8515 VALVE AR-BANK 3, 450-8520 VALVE AR-BANK 4, 450-8521 VALVE AR-BANK 5, 450-8522 VALVE AR-BANK 6
AN ATTACHMENT
i05895423 SEBP6833
3898125 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 416F2 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4743 [3] PIN  
2. 164-1368 [6] FASTENER (CLIP)  
3. 164-1395 [1] KNOB  
4. 206-1345 [2] STRAP-CABLE  
5. 387-6680 Y [1] CONTROL GP-HANDLE (MECHANICAL)  
6. 388-7048 [1] BRACKET AS  
6A. 449-2128 [1] BUSHING  
7. 389-7230 [1] PIN  
8. 389-7232 [1] LEVER AS  
8A. [1] BUSHING  
9. 389-7244 [1] PIN  
10. 389-7277 [1] LEVER AS  
10A. [1] BUSHING  
11. 390-8024 [1] PIN AS  
12. 390-8743 [1] ROD AS  
  8T-4133 M [1] NUT (M10X1.5-THD)  
  8T-4773 [1] BALL JOINT  
  9X-2065 M [1] NUT (M10X1.5-THD, LH)  
  454-2225 [1] ROD  
  454-3053 [1] BALL JOINT  
13. 395-2917 [1] PLATE  
14. 415-2274 [1] SEAL  
15. 418-8607 [1] ROD AS  
  8T-4133 M [1] NUT (M10X1.5-THD)  
  8T-4773 [1] BALL JOINT  
  8T-4815 [1] ROD END  
  390-8742 [1] ROD AS  
16. 418-8609 [1] ROD AS  
  8T-4133 M [2] NUT (M10X1.5-THD)  
  8T-4773 [1] BALL JOINT  
  8T-4815 [1] ROD END  
  390-8822 M [1] STUD (M10X1.5-MM)  
17. 423-2610 Y [1] ROD GP (ROD END)  
18. 430-9923 [1] FILM-INSTRUCTION (LOADER CONTROL)  
19. 454-0097 [4] CLIP  
20. 138-2042 M [2] LOCKNUT (M10X1.5-THD)  
21. 170-4735 [5] RING-RETAINING  
22. 5H-3193 [1] PIN-SPRING  
23. 5P-4116 [2] WASHER-HARD (8.8X20.5X2-MM THK)  
24. 6V-7744 M [4] LOCKNUT (M10X1.5-THD)  
25. 7X-0510 [1] WASHER-HARD (15.5X29X3-MM THK)  
26. 7X-7729 [2] WASHER (11X25X3-MM THK)  
27. 8T-4121 [5] WASHER-HARD (11X21X2.5-MM THK)  
28. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
29. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP68330798
 

398-3601: CONTROL GP-HYDRAULIC HAND

398-3601 CONTROL GP-HYDRAULIC HAND
S/N HWB1-UP
PART OF 398-2496 CONTROL AR-HYDRAULIC
AN ATTACHMENT
i05899634 SEBP6833
3983601 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 416F2 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 164-1399 [2] KNOB  
2. 385-6495 [1] BRACKET AS  
  159-9539 M [2] NUT-WELD (M6X1-THD)  
3. 385-6505 [2] BRACKET AS  
4. 398-3600 [2] LEVER  
5. 399-5401 [1] PLATE AS  
  159-9540 M [10] NUT-WELD (M8X1.25-THD)  
6. 399-5402 [1] PLATE AS  
7. 417-9356 [4] TIE ROD GP  
    (EACH INCLUDES)
  8T-4133 M [2] NUT (M10X1.5-THD)  
  303-9307 [1] ROD  
  537-1973 [1] BALL JOINT  
  435-7651 [1] BALL JOINT  
8. 425-9077 [1] SEAL  
9. 430-9928 [1] FILM-INSTRUCTION (BACKHOE)  
10. 437-3580 [4] MOUNT  
11. 439-3495 [4] PIN  
12. 454-0097 [2] CLIP  
13. 127-2170 M [9] SCREW-TRUSS HEAD (M8X1.25X20-MM)  
14. 189-5358 M [4] BOLT (M10X1.5X60-MM)  
15. 3E-8000 M [2] NUT-JAM (M16X1.5-THD)  
16. 6V-7357 M [2] BOLT (M6X1X25-MM)  
17. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
18. 8T-4133 M [4] NUT (M10X1.5-THD)  
19. 8T-4189 M [6] BOLT (M8X1.25X20-MM)  
20. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
21. 8T-4222 [4] WASHER-PLATED (11X32X2.5-MM THK)  
22. 8T-4224 [6] WASHER-HARD (8.8X16X2-MM THK)  
23. 9R-2807 [4] CLIP (RETAINER)  
  M   METRIC PART
 

#SEBP68330799
 

468-7974: CONTROL GP-HYDRAULIC HAND

468-7974 CONTROL GP-HYDRAULIC HAND -BACKHOE
S/N HWB1-UP
AN ATTACHMENT
i06151174 SEBP6833
4687974 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 416F2 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 164-1399 [2] KNOB  
2. 385-6495 [1] BRACKET AS  
  159-9539 M [2] NUT-WELD (M6X1-THD)  
  159-9541 M [2] NUT-WELD (M10X1.5-THD)  
3. 385-6505 [2] BRACKET AS  
4. 398-3600 [2] LEVER  
5. 417-9356 [4] TIE ROD GP  
    (EACH INCLUDES)
  8T-4133 M [2] NUT (M10X1.5-THD)  
  303-9307 [1] ROD  
  537-1973 [1] BALL JOINT  
  435-7651 [1] BALL JOINT  
6. 425-9077 [1] SEAL  
7. 430-9928 [1] FILM-INSTRUCTION (BACKHOE)  
8. 437-3580 [4] MOUNT  
9. 439-3495 [4] PIN  
10. 454-0097 [2] CLIP  
11. 189-5358 M [4] BOLT (M10X1.5X60-MM)  
12. 3E-8000 M [2] NUT-JAM (M16X1.5-THD)  
13. 6V-7357 M [2] BOLT (M6X1X25-MM)  
14. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
15. 8T-4133 M [4] NUT (M10X1.5-THD)  
16. 8T-4189 M [6] BOLT (M8X1.25X20-MM)  
17. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
18. 8T-4222 [4] WASHER-PLATED (11X32X2.5-MM THK)  
19. 8T-4224 [6] WASHER-HARD (8.8X16X2-MM THK)  
20. 9R-2807 [4] CLIP (RETAINER)  
  M   METRIC PART
 

Information:

Specifications
Hydraulic Hand Control
415F2, 416F2, 420F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Hydraulic and Steering System
Hydraulic Hand Control
415F2, 416F2, 420F2, 420F2 IT, 420F2 ST, 430F2 IT and 430F2 ST Backhoe Loaders Hydraulic and Steering System

Caterpillar Parts SIS Catalog 416F2 :

398-2692 CONTROL AR-STABILIZER
CONSOLE GP-REAR
399-2031 CONSOLE GP-REAR
CONSOLE GP-OPERATOR
389-9292 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
389-9291 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
389-9290 CONSOLE GP-OPERATOR
CONDENSER & MTG GP-REFRIGERANT
337-9765 CONDENSER & MTG GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
435-7640 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
424-0678 COMPRESSOR GP-REFRIGERANT
CONTROL GP-HANDLE
387-6560 CONTROL GP-HANDLE
CONTROL GP-HANDLE
387-6655 CONTROL GP-HANDLE
CONTROL GP-HANDLE
387-6680 CONTROL GP-HANDLE
CONTROL GP-HANDLE
387-6680 CONTROL GP-HANDLE
CONTROL GP-HYDRAULIC HAND
389-1296 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
389-8124 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
389-8125 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
398-3601 CONTROL GP-HYDRAULIC HAND
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.