BASIC ENGINE
CAMSHAFT GPHOUSING GP-FRONT
VALVE MECHANISM GP
CRANKSHAFT GP
BASIC ENGINE
CAMSHAFT GP
#SEBP68380020
369-3797: CAMSHAFT GP
For full view, you need register
Parts for your 427F2 BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 389-2868 | [6] | BOLT-SPECIAL | |
| 2. | 389-1863 | [2] | BOLT-SPECIAL | |
| 3. | 381-3638 | [8] | PUSHROD | |
| 4. | 383-1332 | [1] | CAMSHAFT AS | |
| 4A. | 381-3515 | [1] | DOWEL | |
| 5. | 383-1333 | [1] | YOKE | |
| 6. | 383-1335 | [1] | GEAR | |
| 7. | 385-1649 | [1] | BOLT (M10X1.5X50-MM) | |
| 8. | 385-9076 | [1] | PINION | |
| 8A. | 387-7739 | [2] | DOWEL | |
| 9. | 385-9077 | [1] | PIN | |
| 10. | 386-2093 | [8] | TAPPET | |
| 11. | 386-6262 | [1] | FLANGE |
#SEBP68380021
424-5882: CAMSHAFT GP
For full view, you need register
Parts for your 427F2 BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 381-3638 | [8] | PUSHROD | |
| 2. | 383-1332 | [1] | CAMSHAFT AS | |
| 2A. | 381-3515 | [1] | DOWEL | |
| 3. | 383-1333 | [1] | YOKE | |
| 4. | 383-1335 | [1] | GEAR | |
| 5. | 385-1649 | [1] | BOLT (M10X1.5X50-MM) | |
| 6. | 385-9077 | [1] | PIN | |
| 7. | 386-2093 | [8] | TAPPET | |
| 8. | 389-1863 | [2] | BOLT-SPECIAL | |
| 9. | 389-1874 | [6] | BOLT-SPECIAL | |
| 10. | 423-0030 | [1] | GEAR |
#SEBP68380022
355-4839: COVER GP-ACCESSORY DRIVE
355-4839 COVER GP-ACCESSORY DRIVE
S/N CNW1-UP
PART OF 352-4213 ENGINE AR-PRIMARY
AN ATTACHMENT
S/N CNW1-UP
PART OF 352-4213 ENGINE AR-PRIMARY
AN ATTACHMENT
For full view, you need register
#SEBP68380023
435-4009: COVER GP-VALVE MECHANISM
435-4009 COVER GP-VALVE MECHANISM
S/N CNW1-UP
PART OF 352-4213 ENGINE AR-PRIMARY
AN ATTACHMENT
S/N CNW1-UP
PART OF 352-4213 ENGINE AR-PRIMARY
AN ATTACHMENT
For full view, you need register
Parts for your 427F2 BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 440-3216 Y | [1] | COVER GP-VALVE MECHANISM | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP68380024
440-3216: COVER GP-VALVE MECHANISM
440-3216 COVER GP-VALVE MECHANISM
S/N CNW1-UP
PART OF 435-4009 COVER GP-VALVE MECHANISM
AN ATTACHMENT
S/N CNW1-UP
PART OF 435-4009 COVER GP-VALVE MECHANISM
AN ATTACHMENT
For full view, you need register
#SEBP68380025
350-3746: CRANKSHAFT GP
350-3746 CRANKSHAFT GP
S/N CNW1-UP
PART OF 352-4213 ENGINE AR-PRIMARY
Type 1
AN ATTACHMENT
S/N CNW1-UP
PART OF 352-4213 ENGINE AR-PRIMARY
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 427F2 BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | Y | [1] | CRANKSHAFT GP | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP68380026
350-3746: CRANKSHAFT GP
350-3746 CRANKSHAFT GP
S/N CNW1-UP
PART OF 352-4213 ENGINE AR-PRIMARY
Type 2
AN ATTACHMENT
S/N CNW1-UP
PART OF 352-4213 ENGINE AR-PRIMARY
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 427F2 BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 459-8174 CY | [1] | CRANKSHAFT GP | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP68380027
361-6356: CRANKSHAFT GP
For full view, you need register
#SEBP68380028
361-6356: CRANKSHAFT GP
For full view, you need register
Parts for your 427F2 BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 454-5820 C | [1] | CRANKSHAFT GP | |
| 1A. | 381-3513 | [3] | BOLT | |
| 1B. | 381-3514 | [1] | DOWEL | |
| 1C. | 385-9059 | [1] | GEAR-CRANKSHAFT | |
| 2. | 385-9063 | [1] | SEAL (REAR) | |
| 3. | 386-2086 | [1] | SEAL | |
| 4. | 390-3066 | [1] | BEARING SET-MAIN | |
| 390-3076 AB | BEARING SET-MAIN (0.254-MM US) | |||
| 390-3077 AB | BEARING SET-MAIN (0.508-MM US) | |||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP68380029
459-8174: CRANKSHAFT GP
For full view, you need register
Parts for your 427F2 BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 385-9063 | [1] | SEAL (REAR) | |
| 2. | 390-3066 | [1] | BEARING SET-MAIN (STANDARD) | |
| 390-3076 AB | BEARING SET-MAIN (0.25-MM US) | |||
| 390-3077 AB | BEARING SET-MAIN (0.51-MM US) | |||
| 3. | 454-5820 | [1] | CRANKSHAFT GP | |
| 3A. | 381-3513 | [3] | BOLT | |
| 3B. | 381-3514 | [1] | DOWEL | |
| 3C. | 385-9059 | [1] | GEAR-CRANKSHAFT | |
| 4. | 460-2323 | [1] | SEAL (FRONT) | |
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
Information:
BASIC ENGINE
CAMSHAFT GP
Engine News
Improved Hardware for the Camshaft Thrust Plate Is Used in Certain 3500 Engines {1204, 1210}
2009/04/13
2009/04/13
Service Letter-NACD
The 5P-0076 Camshaft Segment Bolts On Certain 3512, 3512B, 3516, And 3516B Engines; G3512 And G3516 Gas Engines May Not Have Been Correctly Torqued
The 5P-0076 Camshaft Segment Bolts On Certain 3512, 3512B, 3516, And 3516B Engines; G3512 And G3516 Gas Engines May Not Have Been Correctly Torqued
The 5P-0076 Camshaft Segment Bolts On Certain 3512, 3512B, 3516, And 3516B Engines; G3512 And G3516 Gas Engines May Not Have Been Correctly Torqued
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-China
Service Letter-Asia
Reuse And Salvage Guidelines
Service Letter-APD
The 5P-0076 Camshaft Segment Bolts On Certain 3512, 3512B, 3516, And 3516B Engines; G3512 And G3516 Gas Engines May Not Have Been Correctly Torqued
The 5P-0076 Camshaft Segment Bolts On Certain 3512, 3512B, 3516, And 3516B Engines; G3512 And G3516 Gas Engines May Not Have Been Correctly Torqued
The 5P-0076 Camshaft Segment Bolts On Certain 3512, 3512B, 3516, And 3516B Engines; G3512 And G3516 Gas Engines May Not Have Been Correctly Torqued
Disassembly and Assembly
