AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

366-9458 SHAFT GP-DRIVE -FRONT S/N HWN1-UP PART OF 450-8663 TRANSMISSION AR-DIRECT DRIVE AN ATTACHMENT 428F2


POWER TRAIN
SHAFT GP

BACKHOE LOADER 428F2 BACKHOE LOADER HWN
 428F2 Side Shift Backhoe Loader HWN00001-UP (MACHINE) POWERED BY C4.4 Engine SEBP6839 428F2 HWN   (2013)

POWER TRAIN

SHAFT GP
SHAFT GP-DRIVE
353-1337 SHAFT GP-DRIVE
SHAFT GP-DRIVE
366-9456 SHAFT GP-DRIVE
SHAFT GP-DRIVE
366-9458 SHAFT GP-DRIVE
SHAFT GP-DRIVE
392-9467 SHAFT GP-DRIVE
SHAFT GP-DRIVE
444-1425 SHAFT GP-DRIVE
SHAFT GP-IDLER
274-4561 SHAFT GP-IDLER
 

#SEBP68390360
 

366-9458: SHAFT GP-DRIVE

366-9458 SHAFT GP-DRIVE -FRONT
S/N HWN1-UP
PART OF 450-8663 TRANSMISSION AR-DIRECT DRIVE
AN ATTACHMENT
i05902613 SEBP6839
3669458 SHAFT GP-DRIVE Parts scheme
  For full view, you need register

Parts for your 428F2 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5V-2545 [4] STRAP  
2. 107-6826 M [8] BOLT (5/16-24X0.75-IN)  
3. 416-9089 [1] SHAFT AS  
  3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
  199-1223 [2] UNIVERSAL JOINT  
  M   METRIC PART
 

#SEBP68390361
 

392-9467: SHAFT GP-DRIVE

392-9467 SHAFT GP-DRIVE -ALL WHEEL DRIVE
S/N HWN1-UP
PART OF 380-8841, 549-5469 TRANSMISSION GP-DIRECT DRIVE
AN ATTACHMENT
i05902594 SEBP6839
3929467 SHAFT GP-DRIVE Parts scheme
  For full view, you need register

Parts for your 428F2 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8757 [1] RING-RETAINING  
2. 274-4553 [8] DISC-CLUTCH  
3. 337-3530 [8] DISC-FRICTION  
4. 305-3424 [1] WASHER-THRUST (45X65X4-MM THK)  
5. 172-6050 [2] BEARING-SPECIAL  
6. 122-1878 [1] RING-SEAL  
7. 122-1877 [1] WASHER-THRUST (40X65X4-MM THK)  
8. 122-1884 [1] SPACER (45X49X8-MM THK)  
9. 558-2829 [1] PISTON-CLUTCH  
10. 123-8905 [1] CONE-BEARING  
11. 147-0238 [1] SPRING AS  
12. 161-3249 [1] RING-RETAINING  
13. 123-8912 [2] BEARING-ROLLER  
14. 394-9484 [1] SHAFT AS  
15. 294-9812 [1] RETAINER-SPRING  
16. 8E-5707 [1] PLATE-END  
17. 123-8906 [1] CUP-TAPERED ROLLER  
18. 394-9481 [1] GEAR (36-TEETH)  
19. 438-5163 [1] BUSHING  
 

#SEBP68390362
 

444-1425: SHAFT GP-DRIVE

444-1425 SHAFT GP-DRIVE -REVERSE
S/N HWN1-UP
PART OF 380-8841, 549-5469 TRANSMISSION GP-DIRECT DRIVE
AN ATTACHMENT
i05901758 SEBP6839
4441425 SHAFT GP-DRIVE Parts scheme
  For full view, you need register

Parts for your 428F2 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 005-0469 [1] CUP-BEARING  
2. 6V-8144 [1] RING-RETAINING  
3. 383-7974 [1] GEAR (41-TEETH)  
4. 9X-7684 [1] SEAL-O-RING  
5. 005-0471 [1] CONE-BEARING  
6. 383-7984 [2] SEAL-RING  
7. 383-7989 [1] WASHER-THRUST  
8. 383-7990 [1] WASHER-THRUST  
9. 425-9214 [1] BEARING-NEEDLE  
10. 438-5164 [1] BEARING-TAPERED ROLLER  
11. 442-9960 [1] SPRING-RETURN  
12. 442-9962 [1] SPRING-RETAINER  
13. 443-3302 [10] PLATE-CLUTCH  
14. 467-3151 [10] DISC-FRICTION  
15. 443-7550 [1] GEAR (23-TEETH)  
16. 444-1421 [1] PISTON  
17. 444-1423 [1] SHAFT AS-REVERSE  
  [2] PLUG  
  [1] DRUM AS  
18. 444-1670 [1] PLATE-END  
19. 447-5547 [1] SLEEVE  
20. 1H-8128 [1] SEAL-O-RING  
21. 261-3255 [1] RING-RETAINING  
22. 425-9210 [1] BEARING  
 

#SEBP68390363
 

274-4561: SHAFT GP-IDLER

274-4561 SHAFT GP-IDLER -POWERSHIFT
S/N HWN1-UP
PART OF 438-9374, 439-4899 TRANSMISSION AR-POWER SHIFT
AN ATTACHMENT
i02432348 SEBP6839
2744561 SHAFT GP-IDLER Parts scheme
  For full view, you need register

Parts for your 428F2 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 147-0256 [1] SHAFT AS-REVERSE  
  163-9091 [1] PLUG  
  147-0270 [1] ORIFICE  
2. 147-0202 [1] GEAR (45/24-TEETH)  
3. 388-8330 [2] BEARING AS-TAPERED ROLLER  
    (EACH INCLUDES)
  123-8905 [1] CONE-BEARING  
  123-8906 [1] CUP-TAPERED ROLLER  
4. 294-9810 [1] PISTON  
5. 294-9812 [1] RETAINER-SPRING  
7. 147-0238 [1] SPRING AS  
8. 274-4553 [5] DISC-CLUTCH  
9. 6Y-7929 [5] DISC-FRICTION  
10. 147-0259 [1] SPACER (51.1X54.9X18.7-MM THK)  
11. 6V-8757 [1] RING-RETAINING  
12. 121-2500 [1] WASHER-THRUST (50X70X4-MM THK)  
13. 172-5317 [2] BEARING-SPECIAL  
14. 121-0694 [1] WASHER-THRUST (40X70X4-MM THK)  
15. 6Y-1192 [2] RING-SEAL  
16. 8E-5707 [1] PLATE-END  
17. 9U-8875 [1] RING-RETAINING  
18. 7T-6655 [2] BEARING  
 

#SEBP68390364
 

274-4578: SHAFT GP-INPUT

274-4578 SHAFT GP-INPUT
S/N HWN1-UP
PART OF 439-4899 TRANSMISSION AR-POWER SHIFT
AN ATTACHMENT
i02432349 SEBP6839
2744578 SHAFT GP-INPUT Parts scheme
  For full view, you need register

Parts for your 428F2 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 294-9812 [2] RETAINER-SPRING  
3. 6V-8757 [3] RING-RETAINING  
4. 6Y-7929 [11] DISC-FRICTION  
5. 7T-6655 [2] BEARING  
6. 8E-5707 [2] PLATE-END  
7. 9U-8886 [4] RING-SEAL  
8. 121-0694 [1] WASHER-THRUST (40X70X4-MM THK)  
9. 121-2500 [3] WASHER-THRUST (50X70X4-MM THK)  
10. 122-1886 [1] RING-SEAL  
11. 388-8330 [1] BEARING AS-TAPERED ROLLER  
  123-8905 [1] CONE-BEARING  
  123-8906 [1] CUP-TAPERED ROLLER  
13. 349-9891 [1] BEARING-TAPERED ROLLER  
  123-8909 [1] CONE-BEARING  
  123-8910 [1] CUP-TAPERED ROLLER  
15. 123-8913 [2] BEARING-ROLLER  
16. 147-0202 [1] GEAR (45/24-TEETH)  
17. 147-0224 [1] GEAR (45/32-TEETH)  
18. 294-9810 [2] PISTON  
19. 147-0238 [2] SPRING AS  
20. 147-0257 [1] SHAFT AS-INPUT  
20A. 123-0714 [1] BEARING  
  123-2920 [3] PLUG  
21. 147-0259 [1] SPACER (51.1X54.9X18.7-MM THK)  
22. 172-5317 [4] BEARING-SPECIAL  
23. 274-4553 [11] DISC-CLUTCH  
24. 9U-8875 [2] RING-RETAINING  
 

#SEBP68390365
 

374-5110: SHAFT GP-INPUT

374-5110 SHAFT GP-INPUT -TRANSMISSION
S/N HWN1-UP
PART OF 438-9374 TRANSMISSION AR-POWER SHIFT
AN ATTACHMENT
i04611710 SEBP6839
3745110 SHAFT GP-INPUT Parts scheme
  For full view, you need register

Parts for your 428F2 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-7929 [11] DISC-FRICTION  
2. 7T-6655 [2] BEARING  
3. 8E-5707 [2] PLATE-END  
4. 9U-8886 [5] RING-SEAL  
5. 121-0694 [1] WASHER-THRUST (40X70X4-MM THK)  
6. 121-2500 [3] WASHER-THRUST (50X70X4-MM THK)  
7. 122-1886 [1] RING-SEAL  
8. 123-8905 [1] CONE-BEARING  
9. 123-8906 [1] CUP-TAPERED ROLLER  
10. 123-8909 [1] CONE-BEARING  
11. 123-8910 [1] CUP-TAPERED ROLLER  
12. 123-8913 [2] BEARING-ROLLER  
13. 147-0202 [1] GEAR (45/24-TEETH)  
14. 147-0224 [1] GEAR (45/32-TEETH)  
15. 147-0238 [2] SPRING AS  
    (EACH INCLUDES)
  [1] SPRING-RETAINER  
  [16] SPRING-PISTON  
16. 147-0259 [1] SPACER (51.1X54.9X18.7-MM THK)  
17. 172-5317 [4] BEARING-SPECIAL  
18. 274-4553 [11] DISC-CLUTCH  
19. 9U-8875 [2] RING-RETAINING  
20. 558-2827 [2] PISTON-CLUTCH  
21. 294-9812 [2] RETAINER-SPRING  
22. 374-5109 [1] SHAFT AS-INPUT  
22A. 123-0714 [1] BEARING  
22B. 123-2920 [3] PLUG  
23. 6V-8757 [3] RING-RETAINING  
 

#SEBP68390366
 

444-1424: SHAFT GP-INPUT

444-1424 SHAFT GP-INPUT
S/N HWN1-UP
PART OF 380-8841, 549-5469 TRANSMISSION GP-DIRECT DRIVE
AN ATTACHMENT
i05901755 SEBP6839
4441424 SHAFT GP-INPUT Parts scheme
  For full view, you need register

Parts for your 428F2 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 005-0469 [1] CUP-BEARING  
2. 6V-8144 [2] RING-RETAINING  
3. 6Y-1192 [1] RING-SEAL  
4. 9X-7684 [1] SEAL-O-RING  
5. 005-0471 [1] CONE-BEARING  
6. 122-1886 [3] RING-SEAL  
7. 123-8905 [1] CONE-BEARING  
8. 123-8906 [1] CUP-TAPERED ROLLER  
9. 383-7962 [1] WASHER-THRUST  
10. 383-7964 [1] WASHER-THRUST  
11. 383-7974 [1] GEAR (41-TEETH)  
12. 388-8362 [1] BEARING-THRUST  
13. 425-9213 [1] BEARING-NEEDLE  
14. 442-9960 [1] SPRING-RETURN  
15. 442-9962 [1] SPRING-RETAINER  
16. 443-3302 [10] PLATE-CLUTCH  
17. 467-3151 [10] DISC-FRICTION  
18. 443-7545 [1] SHAFT AS-INPUT  
19. 443-7549 [1] GEAR (23-TEETH)  
20. 444-1421 [1] PISTON  
21. 444-1670 [1] PLATE-END  
22. 447-5547 [1] SLEEVE  
23. 1H-8128 [1] SEAL-O-RING  
24. 261-3255 [1] RING-RETAINING  
 

#SEBP68390367
 

274-4582: SHAFT GP-OUTPUT

274-4582 SHAFT GP-OUTPUT -MAIN
S/N HWN1-UP
PART OF 438-9374, 439-4899 TRANSMISSION AR-POWER SHIFT
AN ATTACHMENT
i02432352 SEBP6839
2744582 SHAFT GP-OUTPUT Parts scheme
  For full view, you need register

Parts for your 428F2 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6T-9196 [2] SEAL  
2. 6Y-1192 [3] RING-SEAL  
3. 6Y-7929 [13] DISC-FRICTION  
4. 8E-5707 [2] PLATE-END  
5. 8T-1580 [1] CUP-BEARING  
6. 8T-1581 [1] BEARING-TAPERED ROLLER  
7. 009-2062 [2] SEAL-O-RING  
8. 095-0927 [1] RING-RETAINING  
9. 095-0928 [1] RING-RETAINING  
10. 121-0885 [1] RETAINER  
11. 122-1877 [1] WASHER-THRUST (40X65X4-MM THK)  
12. 123-8907 [1] CONE-BEARING  
13. 123-8908 [1] CUP-TAPERED ROLLER  
14. 123-8912 [2] BEARING-ROLLER  
15. 147-0203 [1] WASHER-THRUST (45.3X65X5-MM THK)  
16. 147-0205 [2] WASHER (55X78X5-MM THK)  
17. 147-0242 [1] GEAR (48-TEETH)  
18. 147-0248 [1] SPACER (56.2X60X15.8-MM THK)  
19. 147-0260 [1] RETAINER-SPRING  
20. 147-0261 [1] SHAFT AS-OUTPUT (REAR)  
  163-9091 [2] PLUG  
21. 150-3757 [2] BEARING  
22. 157-2088 [2] PISTON AS  
23. 157-2090 [1] GEAR (38-TEETH)  
24. 172-6050 [2] BEARING-SPECIAL  
25. 172-6743 [2] BEARING-SPECIAL  
26. 178-9566 [2] SPRING-PISTON  
27. 211-6753 [1] GEAR (24-TEETH)  
28. 274-4553 [13] DISC-CLUTCH  
29. 274-8638 [2] RING-RETAINING  
 

#SEBP68390368
 

280-7007: SHAFT GP-OUTPUT

280-7007 SHAFT GP-OUTPUT -FRONT
S/N HWN1-UP
PART OF 439-0973 CLUTCH GP
AN ATTACHMENT
i02432353 SEBP6839
2807007 SHAFT GP-OUTPUT Parts scheme
  For full view, you need register

Parts for your 428F2 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 294-9812 [1] RETAINER-SPRING  
3. 6V-8757 [1] RING-RETAINING  
4. 337-3530 [8] DISC-FRICTION  
5. 8E-5707 [1] PLATE-END  
6. 122-1877 [1] WASHER-THRUST (40X65X4-MM THK)  
7. 122-1878 [1] RING-SEAL  
8. 122-1884 [1] SPACER (45X49X8-MM THK)  
9. 388-8330 [2] BEARING AS-TAPERED ROLLER  
    (EACH INCLUDES)
  123-8905 [2] CONE-BEARING  
  123-8906 [2] CUP-TAPERED ROLLER  
11. 123-8912 [2] BEARING-ROLLER  
12. 147-0203 [1] WASHER-THRUST (45.3X65X5-MM THK)  
13. 147-0207 [1] SHAFT AS-OUTPUT (FRONT)  
14. 147-0210 [1] GEAR (45/36-TEETH)  
15. 305-3431 [1] PISTON  
16. 147-0238 [1] SPRING AS  
17. 161-3249 [1] RING-RETAINING  
18. 172-6050 [2] BEARING-SPECIAL  
19. 274-4553 [8] DISC-CLUTCH  
 

#SEBP68390369
 

392-9465: SHAFT GP-OUTPUT

392-9465 SHAFT GP-OUTPUT
S/N HWN1-UP
PART OF 380-8841 TRANSMISSION GP-DIRECT DRIVE
AN ATTACHMENT
i05901814 SEBP6839
3929465 SHAFT GP-OUTPUT Parts scheme
  For full view, you need register

Parts for your 428F2 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 123-8913 [1] BEARING-ROLLER  
2. 150-3757 [2] BEARING  
3. 7T-6655 [1] BEARING  
4. 105-3032 [1] CONE-BEARING  
5. 345-7523 [4] SHIM (0.18-MM THK)  
6. 7T-3021 [2] SYNCHRONIZER GP  
7. 425-9215 [2] BEARING-NEEDLE  
8. 383-7978 [1] SLEEVE  
9. 394-9486 [1] GEAR (20-TEETH)  
10. 394-9488 [1] SHAFT-OUTPUT  
11. 394-9489 [1] GEAR (49-TEETH)  
12. 394-9490 [1] GEAR (44-TEETH)  
13. 394-9491 [1] GEAR (37-TEETH)  
14. 394-9492 [1] SLEEVE  
15. 446-0174 [2] SPACER-BEARING  
16. 394-9493 [1] SLEEVE  
17. 1K-6995 [1] RING-LOCK  
18. 8T-1581 [1] BEARING-TAPERED ROLLER  
19. 415-5540 [1] GEAR (30-TEETH)  
20. 458-0965 [1] WASHER  
21. 105-3033 [1] CUP-BEARING  
22. 131-3539 M [1] SCREW-FLAT HEAD (M8X1.25X30-MM)  
23. 8T-1580 [1] CUP-BEARING  
  M   METRIC PART
 

Information:

Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE COUNTERSHAFT CLUTCH RETAINING RING ON CERTAIN F AND F2 SERIES BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE COUNTERSHAFT CLUTCH RETAINING RING ON CERTAIN F AND F2 SERIES BACKHOE LOADERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Main Drive Shaft Universal Joint Retaining Straps May Become Loose or Break on Certain Backhoe Loaders {3253}
Main Drive Shaft Universal Joint Retaining Straps May Become Loose or Break on Certain Backhoe Loaders {3253}
Specifications
Drive Shaft
422F2, 426F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Axles, Differential and Brakes
Drive Shaft
422F2, 426F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Axles, Differential and Brakes
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE COUNTERSHAFT CLUTCH RETAINING RING ON CERTAIN F AND F2 SERIES BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE COUNTERSHAFT CLUTCH RETAINING RING ON CERTAIN F AND F2 SERIES BACKHOE LOADERS
Service Letter-Asia
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE COUNTERSHAFT CLUTCH RETAINING RING ON CERTAIN F AND F2 SERIES BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE COUNTERSHAFT CLUTCH RETAINING RING ON CERTAIN F AND F2 SERIES BACKHOE LOADERS
Disassembly and Assembly
Drive Shaft (Rear) - Remove and Install
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Powertrain
Drive Shaft (Front) - Remove and Install
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Powertrain
Service Magazine
Improved Transmission Clutch Retaining Ring Is Now Used on Certain Backhoe Loaders and Vibratory Utility Compactors {3053, 3063}
Improved Transmission Clutch Retaining Ring Is Now Used on Certain Backhoe Loaders and Vibratory Utility Compactors {3053, 3063}
Manufacturing Process for the Standard Shift Transmission Synchronizer Sleeve Has Been Improved on Certain Backhoe Loaders {3030, 3053, 3063}
Manufacturing Process for the Standard Shift Transmission Synchronizer Sleeve Has Been Improved on Certain Backhoe Loaders {3030, 3053, 3063}
Weld Modification on Shaft Assembly for Autoshift Transmission is Now Used on Certain Backhoe Loaders {3053, 3063}
Weld Modification on Shaft Assembly for Autoshift Transmission is Now Used on Certain Backhoe Loaders {3053, 3063}

Caterpillar Parts SIS Catalog 428F2 :

SHAFT GP-DRIVE
366-9456 SHAFT GP-DRIVE
SHAFT GP-DRIVE
353-1337 SHAFT GP-DRIVE
SHAFT GP-DRIVE
353-1335 SHAFT GP-DRIVE
SHAFT GP-COUNTER
274-4580 SHAFT GP-COUNTER
PUMP GP-TRANSMISSION
445-8926 PUMP GP-TRANSMISSION
PUMP GP-TRANSMISSION
443-3872 PUMP GP-TRANSMISSION
PUMP GP-TRANSMISSION
426-4365 PUMP GP-TRANSMISSION
PUMP GP-TRANSMISSION
121-7385 PUMP GP-TRANSMISSION
SHAFT GP-DRIVE
392-9467 SHAFT GP-DRIVE
SHAFT GP-DRIVE
444-1425 SHAFT GP-DRIVE
SHAFT GP-IDLER
274-4561 SHAFT GP-IDLER
SHAFT GP-INPUT
274-4578 SHAFT GP-INPUT
SHAFT GP-INPUT
374-5110 SHAFT GP-INPUT
SHAFT GP-INPUT
444-1424 SHAFT GP-INPUT
SHAFT GP-OUTPUT
274-4582 SHAFT GP-OUTPUT
SHAFT GP-OUTPUT
280-7007 SHAFT GP-OUTPUT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.