AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

515-0084 CONTROL GP-HYDRAULIC HAND -PARALLEL LIFT S/N HWN1-UP QUICK COUPLER PART OF 513-5061 VALVE AR-BANK 3 AN ATTACHMENT 428F2


OPERATOR STATION
CONTROL GP-HYDRAULIC
CONTROL GP-HYDRAULIC LOCKOUT
CONTROL GP-HYDRAULIC
MONITOR GP
CONTROL GP-STEERING
CONTROL GP-TRANSMISSION
CAB GP

BACKHOE LOADER 428F2 BACKHOE LOADER HWN
 428F2 Side Shift Backhoe Loader HWN00001-UP (MACHINE) POWERED BY C4.4 Engine SEBP6839 428F2 HWN   (2013)

OPERATOR STATION

CONTROL GP-HYDRAULIC
398-2497 CONTROL AR-HYDRAULIC
CONTROL GP-HYDRAULIC HAND
385-6492 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
388-4099 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
388-4100 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
389-1296 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
472-4302 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
515-0084 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC PEDAL
393-5477 CONTROL GP-HYDRAULIC PEDAL
CONTROL GP-HYDRAULIC PEDAL
435-3115 CONTROL GP-HYDRAULIC PEDAL
 

#SEBP68390870
 

515-0084: CONTROL GP-HYDRAULIC HAND

515-0084 CONTROL GP-HYDRAULIC HAND -PARALLEL LIFT
S/N HWN1-UP
QUICK COUPLER
PART OF 513-5061 VALVE AR-BANK 3
AN ATTACHMENT
i07232781 SEBP6839
5150084 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 428F2 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4743 [3] PIN  
2. 164-1368 [5] FASTENER (CLIP)  
3. 164-1395 [1] KNOB  
4. 206-1345 [2] STRAP-CABLE  
5. 387-6680 Y [1] CONTROL GP-HANDLE (MECHANICAL)  
6. 388-7048 [1] BRACKET AS  
6A. 449-2128 [1] BUSHING  
7. 389-7230 [1] PIN  
8. 389-7232 [1] LEVER AS  
8A. [1] BUSHING  
9. 389-7244 [1] PIN  
10. 389-7277 [1] LEVER AS  
10A. [1] BUSHING  
11. 390-8024 [1] PIN AS  
12. 390-8743 [1] ROD AS  
  8T-4133 M [1] NUT (M10X1.5-THD)  
  8T-4773 [1] BALL JOINT  
  9X-2065 M [1] NUT (M10X1.5-THD, LH)  
  454-2225 [1] ROD  
  454-3053 [1] BALL JOINT  
13. 395-2917 [1] PLATE  
14. 415-2274 [1] SEAL  
15. 418-8607 [1] ROD AS  
  8T-4133 M [1] NUT (M10X1.5-THD)  
  8T-4773 [1] BALL JOINT  
  8T-4815 [1] ROD END  
  390-8742 [1] ROD AS  
16. 418-8608 [1] ROD AS  
  8T-4133 M [1] NUT (M10X1.5-THD)  
  8T-4773 [1] BALL JOINT  
  8T-4815 [1] ROD END  
  390-8747 [1] ROD  
17. 418-8609 [1] ROD AS  
  8T-4133 M [2] NUT (M10X1.5-THD)  
  8T-4773 [1] BALL JOINT  
  8T-4815 [1] ROD END  
  390-8822 M [1] STUD (M10X1.5-MM)  
18. 454-0097 [5] CLIP  
19. 464-0222 [1] FILM-INSTRUCTION (LOADER CONTROL)  
20. 138-2042 M [2] LOCKNUT (M10X1.5-THD)  
21. 170-4735 [5] RING-RETAINING  
22. 5H-3193 [1] PIN-SPRING  
23. 5P-4116 [2] WASHER-HARD (8.8X20.5X2-MM THK)  
24. 6V-7744 M [4] LOCKNUT (M10X1.5-THD)  
25. 7X-0510 [1] WASHER-HARD (15.5X29X3-MM THK)  
26. 7X-7729 [2] WASHER (11X25X3-MM THK)  
27. 8T-4121 [5] WASHER-HARD (11X21X2.5-MM THK)  
28. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
29. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP68390871
 

231-2879: CONTROL GP-HYDRAULIC LOCKOUT

231-2879 CONTROL GP-HYDRAULIC LOCKOUT -PEDAL, BACKHOE
S/N HWN1-UP
PART OF 396-3937 CONVERSION AR-ROADING
AN ATTACHMENT
i03371829 SEBP6839
2312879 CONTROL GP-HYDRAULIC LOCKOUT Parts scheme
  For full view, you need register

Parts for your 428F2 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 184-5382 [1] PIN  
2. 179-8235 [1] LOCK PIN  
 

#SEBP68390872
 

398-0842: CONTROL GP-HYDRAULIC LOCKOUT

398-0842 CONTROL GP-HYDRAULIC LOCKOUT -HAND THROTTLE
S/N HWN1-UP
PART OF 396-3937 CONVERSION AR-ROADING
AN ATTACHMENT
i05931852 SEBP6839
3980842 CONTROL GP-HYDRAULIC LOCKOUT Parts scheme
  For full view, you need register

Parts for your 428F2 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 330-6992 [1] BLOCK  
2. 346-5063 [1] PIN  
3. 397-6123 [2] BLOCK  
4. 398-0903 [4] COLLAR  
5. 417-7188 [2] PLATE  
6. 422-4225 [1] PIN  
7. 445-6798 [1] PLATE  
8. 5C-7261 M [4] NUT (M8X1.25-THD)  
9. 5P-8524 [4] GROMMET  
10. 7X-2533 M [2] BOLT (M6X1X35-MM)  
11. 8C-6440 [3] SCREW-PAN HEAD (10-16X0.5-IN)  
12. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
13. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
14. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
15. 8T-4224 [8] WASHER-HARD (8.8X16X2-MM THK)  
16. 8T-4908 M [4] BOLT (M8X1.25X25-MM)  
  M   METRIC PART
 

#SEBP68390873
 

393-5477: CONTROL GP-HYDRAULIC PEDAL

393-5477 CONTROL GP-HYDRAULIC PEDAL -AUXILIARY, EXTENDABLE STICK
S/N HWN1-UP
PART OF 450-8734, 450-8735 BACKHOE AR-EXTENDABLE STICK, 472-4301 KIT-AUXILIARY LINES, 398-2857 LINES GP-BACKHOE AUXILIARY
AN ATTACHMENT
i05891809 SEBP6839
3935477 CONTROL GP-HYDRAULIC PEDAL Parts scheme
  For full view, you need register

Parts for your 428F2 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-9824 [1] RING-RETAINING  
2. 8T-4743 [2] PIN  
3. 133-8916 [1] FILM-INSTRUCTION (EXTENDABLE STICK)  
4. 179-8235 [1] LOCK PIN  
5. 184-5382 [1] PIN  
6. 198-0098 [1] FILM-INSTRUCTION (AUXILIARY)  
7. 298-7736 [2] COLLAR  
8. 388-0006 [1] SUPPORT AS (RH)  
8A. 385-6511 [2] BUSHING  
9. 388-0012 [1] SHAFT AS  
10. 388-3234 [1] SHAFT  
11. 396-8863 [1] PEDAL AS (RH)  
12. 423-9623 [1] LEVER AS  
12A. 385-6511 [1] BUSHING  
13. 442-9789 [1] ROD AS  
  8T-4133 M [2] NUT (M10X1.5-THD)  
  8T-4815 [2] ROD END  
  388-3232 [1] ROD  
14. 444-2165 [1] SPACER  
15. 458-7551 [1] ROD AS  
16. 161-7632 M [1] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
17. 8C-7562 M [1] SCREW-FLAT HEAD (M8X1.25X20-MM)  
18. 8T-0389 M [2] LOCKNUT (M10X1.5-THD)  
19. 8T-4121 [5] WASHER-HARD (11X21X2.5-MM THK)  
20. 8T-4186 M [2] BOLT (M10X1.5X40-MM)  
  M   METRIC PART
 

#SEBP68390874
 

435-3115: CONTROL GP-HYDRAULIC PEDAL

435-3115 CONTROL GP-HYDRAULIC PEDAL -EXTENDABLE STICK
S/N HWN1-UP
PART OF 576-6560 LINES GP-BACKHOE AUXILIARY
AN ATTACHMENT
i05917686 SEBP6839
4353115 CONTROL GP-HYDRAULIC PEDAL Parts scheme
  For full view, you need register

Parts for your 428F2 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9R-9901 [4] FASTENER (CLIP)  
2. 179-8235 [1] LOCK PIN  
3. 184-5382 [1] PIN  
4. 399-7021 [1] PEDAL AS (RH)  
5. 436-6411 [1] BRACKET AS  
5A. 385-6511 [6] BUSHING  
6. 437-4428 [1] SHAFT  
7. 442-1131 [1] PLATE AS  
  9R-9901 [4] FASTENER (CLIP)  
8. 459-3782 [1] PLATE AS  
8A. 459-8381 [2] BUSHING  
  459-8448 [1] PLATE  
9. 459-3819 [1] BALL JOINT AS  
10. 459-3820 [1] LEVER AS  
10A. 385-6511 [1] BUSHING  
  459-3783 [1] LEVER AS  
11. 459-3998 [1] SHAFT  
12. 459-8423 [1] SHAFT AS  
13. 460-8345 [1] COVER  
14. 463-9223 B [1] FILM-IDENTIFICATION (AUXILIARY PEDAL)  
15. 463-9224 B [1] FILM-IDENTIFICATION (AUXILIARY PEDAL)  
16. 091-9035 [4] SPACER (11X25X20-MM THK)  
17. 110-7595 [1] PIN-SPRING  
18. 127-2170 M [5] SCREW-TRUSS HEAD (M8X1.25X20-MM)  
19. 161-7632 M [1] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
20. 5P-4116 [1] WASHER-HARD (8.8X20.5X2-MM THK)  
21. 6V-7744 M [1] LOCKNUT (M10X1.5-THD)  
22. 6V-9824 [1] RING-RETAINING  
23. 7X-4780 [1] GROMMET  
24. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
25. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
26. 8T-6466 M [4] BOLT (M10X1.5X60-MM)  
27. 9R-2806 [1] PIN  
28. 9R-2807 [3] CLIP (RETAINER)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP68390875
 

437-2175: CONTROL GP-MONITOR

437-2175 CONTROL GP-MONITOR
S/N HWN1-UP
PART OF 439-8066 ELECTRONICS GP-MACHINE
AN ATTACHMENT
i07327563 SEBP6839
  For full view, you need register

Parts for your 428F2 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  548-8634 [1] SOFTWARE GP-MONITOR  
 

#SEBP68390876
 

382-4011: CONTROL GP-STEERING

382-4011 CONTROL GP-STEERING -TILT
S/N HWN1-UP
PART OF 450-8693 CAB AR
AN ATTACHMENT
i05904819 SEBP6839
3824011 CONTROL GP-STEERING Parts scheme
  For full view, you need register

Parts for your 428F2 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8R-2916 [1] COVER AS (CAT STEERING WHEEL)  
2. 363-5911 [1] STEERING WHEEL AS  
  363-6423 [1] PLUG  
3. 363-9061 [1] BOOT  
4. 382-4014 Y [1] STEERING COLUMN GP (TILT)  
5. 395-2934 [1] CONSOLE  
6. 419-0824 [1] KNOB AS-STEERING  
7. 101-7404 M [4] BOLT-SOCKET HEAD (M10X1.5X30-MM)  
8. 131-3985 M [1] SCREW (M6X1-THD)  
9. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
10. 101-7401 M [1] BOLT-SOCKET HEAD (M10X1.5X20-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP68390877
 

382-4012: CONTROL GP-STEERING

382-4012 CONTROL GP-STEERING -TILT
S/N HWN1-UP
PART OF 450-8699 CAB AR
AN ATTACHMENT
i05922211 SEBP6839
3824012 CONTROL GP-STEERING Parts scheme
  For full view, you need register

Parts for your 428F2 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8R-2916 [1] COVER AS (CAT STEERING WHEEL)  
2. 363-5911 [1] STEERING WHEEL AS  
  363-6423 [1] PLUG  
3. 363-9061 [1] BOOT  
4. 382-4015 Y [1] STEERING COLUMN GP (TILT)  
5. 418-6629 [1] CONSOLE  
6. 419-0824 [1] KNOB AS-STEERING  
7. 101-7404 M [4] BOLT-SOCKET HEAD (M10X1.5X30-MM)  
8. 131-3985 M [1] SCREW (M6X1-THD)  
9. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
10. 101-7401 M [1] BOLT-SOCKET HEAD (M10X1.5X20-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP68390878
 

438-9128: CONTROL GP-TRANSMISSION

438-9128 CONTROL GP-TRANSMISSION
S/N HWN1-UP
PART OF 450-8610 POWER TRAIN AR
AN ATTACHMENT
i05897535 SEBP6839
4389128 CONTROL GP-TRANSMISSION Parts scheme
  For full view, you need register

Parts for your 428F2 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [2] STRAP-CABLE  
2. 9R-1766 [1] COVER-BOTTOM  
3. 9R-1767 [1] BOOT  
4. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
5. 164-1153 [1] KNOB (UPPER)  
6. 164-1368 [4] FASTENER (CLIP)  
7. 263-7261 [1] SWITCH GP-PUSH BUTTON (NEUTRALIZER)  
  5P-5677 BD WIRE (18-GA, BLACK)  
  6V-2689 D TUBE-HEAT SHRINK (6.35-MM DIA)(1.3-M)  
  9W-0625 [1] SWITCH AS-PUSH BUTTON  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
8. 470-3683 [1] ROD AS  
9. 395-2912 [1] BOOT  
10. 395-2914 [1] PLATE  
11. 1D-5120 [1] NUT-JAM (3/4-16-THD)  
12. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
13. 8T-4183 M [1] BOLT (M12X1.75X40-MM)  
14. 8T-9501 [2] SCREW (10-16X0.75-IN)  
15. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
16. 8T-4133 M [4] NUT (M10X1.5-THD)  
17. 8T-4182 M [4] BOLT (M10X1.5X45-MM)  
18. 455-8433 [4] MOUNT AS  
19. 465-2558 [1] BLOCK AS  
20. 465-3313 [1] PLATE  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP68390879
 

389-9301: COVER GP-CAB

389-9301 COVER GP-CAB -CONTROL VALVE
S/N HWN1-UP
PART OF 450-8536, 450-8537, 450-8539, 450-8540, 450-8541, 450-8542, 513-5061 VALVE AR-BANK 3
AN ATTACHMENT
i05895361 SEBP6839
3899301 COVER GP-CAB Parts scheme
  For full view, you need register

Parts for your 428F2 BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9R-9901 [6] FASTENER (CLIP)  
2. 164-1361 [2] BOOT  
3. 394-9547 [1] CONSOLE-REAR  
4. 395-2907 [1] PLATE  
5. 394-9548 [2] INSERT  
6. 9X-2038 [6] WASHER (7X19X2-MM THK)  
7. 9X-2045 M [6] SCREW-TRUSS HEAD (M6X1X20-MM)  
  M   METRIC PART
 

Information:

Operation and Maintenance Manual
Two Lever Control (Backhoe)(Excavator Pattern) - If Equipped
428F2, 432F2, 434F2 and 444F2 Backhoe Loaders
Two Lever Control (Backhoe)(Universal Pattern)
428F2, 432F2, 434F2 and 444F2 Backhoe Loaders
Backhoe Extendable Stick Control (Foot Operated) - If Equipped
428F2, 432F2, 434F2 and 444F2 Backhoe Loaders
Backhoe Auxiliary Control (Foot Operated) - If Equipped
428F2, 432F2, 434F2 and 444F2 Backhoe Loaders
Special Instruction
Installation Procedure for the Hydraulic Hand Control Gp (Universal) {5063}
Installation Procedure for the Hydraulic Hand Control Gp (Universal) {5063}
Specifications
Hydraulic Pedal Control
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Hydraulic and Steering System
Hydraulic Hand Control
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Hydraulic and Steering System
Hydraulic Hand Control
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Hydraulic and Steering System
Hydraulic Hand Control
422F2, 427F2, 428F2, 432F2, 434F2 and 444F2 Backhoe Loaders Hydraulic and Steering System
Service Magazine
Improved Ball Joint for the Hydraulic Hand Control Group Is Now Used on Certain Backhoe Loaders {5063}
Improved Ball Joint for the Hydraulic Hand Control Group Is Now Used on Certain Backhoe Loaders {5063}

Caterpillar Parts SIS Catalog 428F2 :

CONTROL GP-HYDRAULIC HAND
472-4302 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
389-1296 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
388-4100 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
388-4099 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
385-6492 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HANDLE
387-6680 CONTROL GP-HANDLE
CONTROL GP-HANDLE
387-6655 CONTROL GP-HANDLE
CONTROL GP-HANDLE
387-6560 CONTROL GP-HANDLE
CONTROL GP-HYDRAULIC LOCKOUT
231-2879 CONTROL GP-HYDRAULIC LOCKOUT
CONTROL GP-HYDRAULIC LOCKOUT
398-0842 CONTROL GP-HYDRAULIC LOCKOUT
CONTROL GP-HYDRAULIC PEDAL
393-5477 CONTROL GP-HYDRAULIC PEDAL
CONTROL GP-HYDRAULIC PEDAL
435-3115 CONTROL GP-HYDRAULIC PEDAL
437-2175 CONTROL GP-MONITOR
CONTROL GP-STEERING
382-4011 CONTROL GP-STEERING
CONTROL GP-STEERING
382-4012 CONTROL GP-STEERING
CONTROL GP-TRANSMISSION
438-9128 CONTROL GP-TRANSMISSION
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.