241-7436 AXLE & MTG AR-REAR S/N CH91-UP PART OF 453-7111 POWER TRAIN AR ALSO AN ATTACHMENT M320D2 WHEELED EXCAVATOR

POWER TRAIN

AXLE GP

0. 241-7436 AXLE & MTG
1. 331-1385 AXLE & TRA
2. 331-1380 AXLE GP-ST

COUPLING GP

3. 275-4912 COUPLING G

POWER TRAIN AR

4. 453-7111 POWER TRAI

SHAFT GP

5. 110-6135 SHAFT GP-D
6. 228-3839 SHAFT GP-D

WHEEL GP

7. 426-3987 TIRE & RIM
8. 443-7807 TIRE & RIM
9. 473-2842 TIRE & RIM
0. INFORMATION

WHEELED EXCAVATOR M320D2 WHEELED EXCAVATOR CH9
M320D2 Wheeled Excavator CH900001-UP (MACHINE) POWERED BY C7.1 Engine SEBP6842 M320D2 CH9 (2014)

POWER TRAIN

AXLE GP

241-7435 AXLE & MTG AR-FRONT

241-7436 AXLE & MTG AR-REAR

331-1385 AXLE & TRANSMISSION AR

331-1380 AXLE GP-STEERING

#SEBP68420190

241-7436: AXLE & MTG AR-REAR

AXLE & MTG AR-REAR

241-7436 AXLE & MTG AR-REAR
S/N CH91-UP
PART OF 453-7111 POWER TRAIN AR
ALSO AN ATTACHMENT

i05519712 SEBP6842

For full view, you need register

Parts for your M320D2 WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5W-0965	[20]	RING
2.	8T-4123	[16]	WASHER (22X35X3.5-MM THK)
3.	8U-5923	[2]	FITTING AS
4.	303-9446	[20]	LOCKWASHER
5.	303-9445 M	[20]	NUT-HEX FLANGE (M22X1.5-THD)
6.	331-1385 Y	[1]	AXLE & TRANSMISSION AR
7.	241-6199	[1]	ELBOW AS
	6V-8398	[1]	SEAL-O-RING
	8T-6850	[1]	SEAL-O-RING
	241-6192	[1]	ELBOW
8.	4I-6766 M	[8]	BOLT (M20X2.5X230-MM)
9.	6V-6560	[2]	SEAL-O-RING
10.	6V-7688 M	[8]	LOCKNUT (M20X2.5-THD)
11.	6V-8398	[3]	SEAL-O-RING
12.	8T-6850	[1]	SEAL-O-RING
13.	8T-7488	[1]	CONNECTOR
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP68420191

331-1385: AXLE & TRANSMISSION AR

AXLE & TRANSMISSION AR

331-1385 AXLE & TRANSMISSION AR
S/N CH91-UP
PART OF 241-7436 AXLE & MTG AR-REAR
ALSO AN ATTACHMENT

i05558516 SEBP6842

3311385 AXLE & TRANSMISSION AR Parts scheme

For full view, you need register

Parts for your M320D2 WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	416-1916 Y	[1]	TRANSMISSION GP (DIRECT DRIVE)
2.	333-8041	[2]	HOUSING-AXLE
3.	333-8042	[2]	SHAFT-AXLE
4.	233-8738	[1]	HOUSING
5.	054-6514 B	[2]	SHIM (0.1-MM THK)
	121-7679 B	[2]	SHIM (0.15-MM THK)
	054-6513 B	[2]	SHIM (0.2-MM THK)
	121-7680 B	[2]	SHIM (0.25-MM THK)
	054-6512 B	[2]	SHIM (0.3-MM THK)
	121-7677 B	[2]	SHIM (0.45-MM THK)
	121-7678 B	[2]	SHIM (0.55-MM THK)
	7T-0552 B	[2]	SHIM (2-MM THK)
	7T-0558 B	[2]	SHIM (1.4-MM THK)
	7T-0560 B	[2]	SHIM (1-MM THK)
	7T-0561 B	[2]	SHIM (0.8-MM THK)
	7T-0562 B	[2]	SHIM (0.6-MM THK)
	7T-0563 B	[2]	SHIM (0.5-MM THK)
	7T-0564 B	[2]	SHIM (0.4-MM THK)
	128-7675 B	[2]	SHIM (0.35-MM THK)
	128-7676 B	[2]	SHIM (0.65-MM THK)
	128-7677 B	[2]	SHIM (0.7-MM THK)
	128-7680 B	[2]	SHIM (0.75-MM THK)
	128-7681 B	[2]	SHIM (0.85-MM THK)
	128-7683 B	[2]	SHIM (0.9-MM THK)
	128-7684 B	[2]	SHIM (0.95-MM THK)
	128-7685 B	[2]	SHIM (1.05-MM THK)
	128-7686 B	[2]	SHIM (1.1-MM THK)
	128-7687 B	[2]	SHIM (1.15-MM THK)
	128-7688 B	[2]	SHIM (1.25-MM THK)
	128-7689 B	[2]	SHIM (1.3-MM THK)
	128-7690 B	[2]	SHIM (1.35-MM THK)
	128-7691 B	[2]	SHIM (1.45-MM THK)
	128-7692 B	[2]	SHIM (1.5-MM THK)
	128-7693 B	[2]	SHIM (1.55-MM THK)
	128-7694 B	[2]	SHIM (1.6-MM THK)
	128-7695 B	[2]	SHIM (1.65-MM THK)
	202-8137 B	[2]	SHIM (1.47-MM THK)
	202-8138 B	[2]	SHIM (1.63-MM THK)
	202-8139 B	[2]	SHIM (1.75-MM THK)
	202-8140 B	[2]	SHIM (1.7-MM THK)
	202-8141 B	[2]	SHIM (1.8-MM THK)
	202-8142 B	[2]	SHIM (1.85-MM THK)
	202-8143 B	[2]	SHIM (1.9-MM THK)
	202-8144 B	[2]	SHIM (1.95-MM THK)
45.	6Y-2942	[2]	BEARING-TAPERED ROLLER
46.	6Y-2943	[2]	CUP-BEARING (TAPERED ROLLER)
47.	8U-6079	[2]	SEAL-O-RING
48.	5W-5627 M	[32]	BOLT (M18X2.5X60-MM)
49.	263-3629	[3]	PLUG AS
			(EACH INCLUDES)
	203-0215	[1]	SEAL-O-RING
50.	203-0215	[1]	SEAL-O-RING
51.	263-3630	[1]	PLUG AS-MAGNET (AXLE HOUSING)
52.	8T-4183 M	[4]	BOLT (M12X1.75X40-MM)
53.	6V-8149 M	[10]	NUT (M12X1.75-THD)
54.	372-4119	[1]	GEAR-CROWN
55.	371-7328	[1]	CASE-DIFFERENTIAL
56.	331-1391	[1]	COVER
58.	331-1393	[2]	WASHER-THRUST
59.	416-2319	[2]	GEAR-DIFFERENTIAL
60.	331-1396	[4]	GEAR-DIFFERENTIAL
61.	331-1397	[4]	WASHER-THRUST
62.	331-1398	[1]	SHAFT
63.	331-1399	[2]	SHAFT
64.	204-3975	[2]	PIN-SPRING
65.	336-7377 M	[16]	BOLT-SOCKET HEAD (M12X1.5X35-MM)
66.	233-8739	[2]	HUB GP-WHEEL
			(EACH INCLUDES)
66A.	243-0378	[1]	NUT
67.	5W-5682	[2]	VALVE AS-PURGE (AXLE)
68.	8T-4140 M	[28]	BOLT (M16X2X60-MM)
69.	8U-5927	[2]	SEAL-O-RING
70.	375-2548	[2]	GEAR-SUN
71.	203-5417	[2]	SEAL-LIP TYPE
72.	121-8167	[4]	BEARING-ROLLER
73.	238-3298	[2]	SLEEVE-SPACER
74.	333-8029	[2]	HUB-FLANGE
75.	7X-5762	[2]	SEAL-O-RING
76.	263-3701	[2]	GEAR-CARRIER
77.	320-9728	[4]	SEAL-O-RING
78.	320-9731	[2]	SEAL-O-RING
79.	298-2314	[2]	GEAR-INTERNAL
80.	328-8804	[2]	PISTON
81.	263-4057	[8]	DOWEL
82.	355-2319	[2]	SEAL
83.	238-3303	[2]	RING (2-MM THK)
84.	8U-0754	[2]	SEAL
85.	238-3304	[2]	RING (2-MM THK)
86.	8U-3592	[16]	SPRING
87.	238-3305	[16]	SPRING
88.	298-2315	[16]	BOLT-SPECIAL
89.	8U-3591	[16]	SPACER (6.5X15X7-MM THK)
90.	263-3704	[12]	DISC-CLUTCH (4.5-MM THK)
91.	238-3309 B	[12]	DISC-CLUTCH (2.5-MM THK)
92.	238-3307 B	[2]	DISC-CLUTCH (2-MM THK)
93.	238-3308 B	[2]	DISC-CLUTCH (3-MM THK)
95.	375-1360	[2]	WASHER-THRUST (10X40.2X5.1-MM THK)
96.	375-8264	[2]	CAGE-PINION
97.	375-1359	[6]	GEAR-PLANETARY
99.	110-4737	[6]	RING-RETAINING
100.	6V-3668 M	[4]	BOLT (M12X1.75X30-MM)
101.	243-5336 M	[2]	BOLT (M10X1.5X20-MM)
102.	333-8037	[20]	STUD-WHEEL
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP68420192

331-1380: AXLE GP-STEERING

AXLE GP-STEERING

331-1380 AXLE GP-STEERING
S/N CH91-UP
PART OF 241-7435 AXLE & MTG AR-FRONT
ALSO AN ATTACHMENT

i05558450 SEBP6842

For full view, you need register

Parts for your M320D2 WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	372-4119	[1]	GEAR-CROWN
2.	372-4122	[1]	PINION
3.	110-0124 B	[1]	SHIM (2-MM THK)
	110-0122 B	[1]	SHIM (1.8-MM THK)
	110-0121 B	[1]	SHIM (1.5-MM THK)
	110-0120 B	[1]	SHIM (1.2-MM THK)
	129-9912 B	[1]	SHIM (1.9-MM THK)
	129-9913 B	[1]	SHIM (1.7-MM THK)
	129-9914 B	[1]	SHIM (1.6-MM THK)
	129-9915 B	[1]	SHIM (1.4-MM THK)
	129-9916 B	[1]	SHIM (1.3-MM THK)
	190-8567 B	[1]	SHIM (1-MM THK)
	190-8566 B	[1]	SHIM (0.9-MM THK)
	190-8565 B	[1]	SHIM (0.8-MM THK)
	190-8563 B	[1]	SHIM (0.7-MM THK)
	190-8561 B	[1]	SHIM (0.6-MM THK)
	5W-2074 B	[1]	SHIM (0.5-MM THK)
	5W-2073 B	[1]	SHIM (0.3-MM THK)
	5W-3644 B	[1]	SHIM (0.2-MM THK)
	5W-2072 B	[1]	SHIM (0.1-MM THK)
	193-1123 B	[1]	SHIM (0.75-MM THK)
	193-1124 B	[1]	SHIM (0.65-MM THK)
	331-1378 B	[1]	SHIM (1.25-MM THK)
	331-1379 B	[1]	SHIM (1.35-MM THK)
	331-1381 B	[1]	SHIM (1.45-MM THK)
	331-1382 B	[1]	SHIM (1.55-MM THK)
	331-1383 B	[1]	SHIM (1.65-MM THK)
	331-1384 B	[1]	SHIM (1.75-MM THK)
	331-1386 B	[1]	SHIM (1.85-MM THK)
30.	333-8048	[1]	BEARING-TAPERED ROLLER
31.	110-0158 B	[1]	RING (16-MM THK)
	110-0157 B	[1]	RING (16.1-MM THK)
	110-0156 B	[1]	RING (16.2-MM THK)
	110-0155 B	[1]	RING (16.3-MM THK)
	110-0154 B	[1]	RING (16.4-MM THK)
	110-0153 B	[1]	RING (16.5-MM THK)
	110-0152 B	[1]	RING (16.6-MM THK)
	110-0151 B	[1]	RING (16.7-MM THK)
	110-0150 B	[1]	RING (16.8-MM THK)
	110-0146 B	[1]	RING (16.92-MM THK)
	110-0140 B	[1]	RING (17.1-MM THK)
	110-0139 B	[1]	RING (17.2-MM THK)
	110-0138 B	[1]	RING (17.3-MM THK)
	110-0137 B	[1]	RING (17.4-MM THK)
	110-0148 B	[1]	RING (16.86-MM THK)
	110-0144 B	[1]	RING (16.98-MM THK)
	110-0142 B	[1]	RING (17.04-MM THK)
	202-9635 B	[1]	RING (16.56-MM THK)
	202-9636 B	[1]	RING (16.62-MM THK)
	202-9637 B	[1]	RING (16.64-MM THK)
	202-9643 B	[1]	RING (16.68-MM THK)
	202-9644 B	[1]	RING (16.72-MM THK)
	202-9669 B	[1]	RING (16.74-MM THK)
	202-9670 B	[1]	RING (16.76-MM THK)
	202-9671 B	[1]	RING (16.78-MM THK)
	202-9673 B	[1]	RING (16.84-MM THK)
	202-9679 B	[1]	RING (16.88-MM THK)
	202-9680 B	[1]	RING (16.9-MM THK)
	202-9681 B	[1]	RING (16.94-MM THK)
	193-1454 B	[1]	RING (16.66-MM THK)
	193-1455 B	[1]	RING (16.96-MM THK)
	193-1458 B	[1]	RING (17-MM THK)
	193-1460 B	[1]	RING (17.02-MM THK)
	193-1461 B	[1]	RING (17.06-MM THK)
	193-1462 B	[1]	RING (17.08-MM THK)
	193-1463 B	[1]	RING (17.12-MM THK)
	193-1464 B	[1]	RING (17.14-MM THK)
	193-1465 B	[1]	RING (17.16-MM THK)
	193-1466 B	[1]	RING (17.18-MM THK)
	193-1467 B	[1]	RING (17.22-MM THK)
	193-1469 B	[1]	RING (17.24-MM THK)
	193-1470 B	[1]	RING (17.26-MM THK)
	193-1471 B	[1]	RING (17.28-MM THK)
75.	269-2407	[1]	BEARING-ROLLER
76.	418-8616	[1]	SEAL-LIP TYPE
77.	8U-2506	[1]	WASHER (30.5X55.5X6-MM THK)
78.	110-0848 M	[1]	NUT (M30X1.5-THD)
79.	417-6660	[1]	FLANGE-DRIVE
80.	331-1388	[1]	PLATE-DEFLECTOR
81.	371-7328	[1]	CASE-DIFFERENTIAL
82.	331-1391	[1]	COVER
84.	331-1393	[2]	WASHER-THRUST
85.	416-2319 C	[2]	GEAR-DIFFERENTIAL
86.	331-1396	[4]	GEAR-DIFFERENTIAL
87.	331-1397	[4]	WASHER-THRUST
88.	331-1398	[1]	SHAFT
89.	331-1399	[2]	SHAFT
90.	204-3975	[2]	PIN-SPRING
91.	336-7377 M	[16]	BOLT-SOCKET HEAD (M12X1.5X35-MM)
92.	054-6514 B	[2]	SHIM (0.1-MM THK)
	121-7679 B	[2]	SHIM (0.15-MM THK)
	054-6513 B	[2]	SHIM (0.2-MM THK)
	121-7680 B	[2]	SHIM (0.25-MM THK)
	054-6512 B	[2]	SHIM (0.3-MM THK)
	7T-0564 B	[2]	SHIM (0.4-MM THK)
	121-7677 B	[2]	SHIM (0.45-MM THK)
	7T-0563 B	[2]	SHIM (0.5-MM THK)
	121-7678 B	[2]	SHIM (0.55-MM THK)
	7T-0562 B	[2]	SHIM (0.6-MM THK)
	128-7676 B	[2]	SHIM (0.65-MM THK)
	128-7677 B	[2]	SHIM (0.7-MM THK)
	128-7680 B	[2]	SHIM (0.75-MM THK)
	7T-0561 B	[2]	SHIM (0.8-MM THK)
	128-7681 B	[2]	SHIM (0.85-MM THK)
	128-7683 B	[2]	SHIM (0.9-MM THK)
	128-7684 B	[2]	SHIM (0.95-MM THK)
	7T-0560 B	[2]	SHIM (1-MM THK)
	128-7685 B	[2]	SHIM (1.05-MM THK)
	128-7686 B	[2]	SHIM (1.1-MM THK)
	128-7687 B	[2]	SHIM (1.15-MM THK)
	128-7688 B	[2]	SHIM (1.25-MM THK)
	128-7689 B	[2]	SHIM (1.3-MM THK)
	128-7690 B	[2]	SHIM (1.35-MM THK)
	7T-0558 B	[2]	SHIM (1.4-MM THK)
	128-7691 B	[2]	SHIM (1.45-MM THK)
	128-7692 B	[2]	SHIM (1.5-MM THK)
	128-7693 B	[2]	SHIM (1.55-MM THK)
	128-7694 B	[2]	SHIM (1.6-MM THK)
	128-7695 B	[2]	SHIM (1.65-MM THK)
	7T-0552 B	[2]	SHIM (2-MM THK)
	202-8137 B	[2]	SHIM (1.47-MM THK)
	202-8138 B	[2]	SHIM (1.63-MM THK)
	202-8139 B	[2]	SHIM (1.75-MM THK)
	202-8140 B	[2]	SHIM (1.7-MM THK)
	202-8142 B	[2]	SHIM (1.85-MM THK)
	202-8143 B	[2]	SHIM (1.9-MM THK)
	202-8144 B	[2]	SHIM (1.95-MM THK)
132.	6Y-2942	[2]	BEARING-TAPERED ROLLER
133.	6Y-2943	[2]	CUP-BEARING (TAPERED ROLLER)
134.	8U-6079	[2]	SEAL-O-RING
135.	5W-5627 M	[32]	BOLT (M18X2.5X60-MM)
136.	263-3629	[3]	PLUG AS
			(EACH INCLUDES)
	203-0215	[1]	SEAL-O-RING
137.	263-3630	[1]	PLUG AS-MAGNET (AXLE HOUSING)
138.	203-0215	[1]	SEAL-O-RING
139.	333-8001	[2]	HOUSING-AXLE
140.	331-1409	[1]	HOUSING
141.	220-2593	[4]	BUSHING-SLEEVE
142.	333-8005	[4]	SEAL-RING
143.	388-2516	[2]	BUSHING
144.	333-8009	[2]	UNIVERSAL JOINT GP
			(EACH INCLUDES)
	243-0905	[1]	FORK
	243-0906	[2]	SPIDER AS
			(EACH INCLUDES)
	8T-9597	[4]	RING-RETAINING
146.	243-0909	[1]	TIE ROD GP (LH)
	243-0910	[1]	BALL JOINT AS
	295-6358 M	[1]	NUT (M28X1.5-THD)
	295-6535	[1]	JOINT AS (LH)
147.	243-0911	[1]	TIE ROD GP (RH)
	243-0910	[1]	BALL JOINT AS
	295-6358 M	[1]	NUT (M28X1.5-THD)
	295-6536	[1]	JOINT AS (RH)
148.	164-5912 M	[2]	LOCKNUT (M27X1.5-THD)
149.	333-8016	[1]	HOUSING GP-AXLE (LH)
149A.	243-0378	[1]	NUT
150.	333-8017	[1]	HOUSING GP-AXLE (RH)
150A.	243-0378	[1]	NUT
151.	4D-8648	[4]	CUP-BEARING
152.	110-0858	[4]	CAP-SEALING
153.	110-4743	[4]	SEAL-O-RING
154.	333-8023	[2]	TRUNNION
155.	333-8024	[2]	TRUNNION
156.	135-3437	[2]	SEAL-O-RING
157.	296-4057 M	[16]	BOLT (M18X2.5X35-MM)
158.	5W-2998	[4]	FITTING-GREASE
160.	243-0917	[2]	WASHER-THRUST
161.	243-0918	[2]	WASHER-THRUST
162.	110-0846	[2]	RING-RETAINING
163.	5W-5682	[2]	VALVE AS-PURGE (AXLE)
164.	8U-2354 B	[2]	SHIM (6-MM THK)
	5W-6405 B	[2]	SHIM (6.5-MM THK)
	5W-7644 B	[2]	SHIM (4-MM THK)
	5W-7642 B	[2]	SHIM (5-MM THK)
	5W-7641 B	[2]	SHIM (5.5-MM THK)
	5W-7643 B	[1]	SHIM (4.5-MM THK)
	128-1733 B	[2]	SHIM (2-MM THK)
	128-1734 B	[2]	SHIM (3-MM THK)
	5W-6408 B	[2]	WASHER (18.5X35X8-MM THK)
	202-8145 B	[2]	WASHER (18.5X35X9-MM THK)
	202-8149 B	[2]	WASHER (18.5X35X14-MM THK)
175.	5W-2173 M	[4]	BOLT (M18X2.5X40-MM)
176.	241-8122 M	[2]	NUT (M18X2.5-THD)
177.	375-1285 Y	[1]	CYLINDER GP-STEERING
178.	6V-3823 M	[5]	BOLT (M12X1.75X60-MM)
179.	203-5417	[2]	SEAL-LIP TYPE
180.	121-8167	[4]	BEARING-ROLLER
181.	238-3298	[2]	SLEEVE-SPACER
182.	333-8029	[2]	HUB-FLANGE
183.	7X-5762	[2]	SEAL-O-RING
184.	263-3701	[2]	GEAR-CARRIER
185.	320-9728	[4]	SEAL-O-RING
186.	320-9731	[2]	SEAL-O-RING
187.	298-2314	[2]	GEAR-INTERNAL
188.	328-8804	[2]	PISTON
189.	263-4057	[8]	DOWEL
190.	355-2319	[2]	SEAL
191.	238-3303	[2]	RING (2-MM THK)
192.	8U-0754	[2]	SEAL
193.	238-3304	[2]	RING (2-MM THK)
194.	8U-3592	[16]	SPRING
195.	238-3305	[16]	SPRING
196.	298-2315	[16]	BOLT-SPECIAL
197.	8U-3591	[16]	SPACER (6.5X15X7-MM THK)
198.	263-3704	[12]	DISC-CLUTCH (4.5-MM THK)
199.	238-3309	[10]	DISC-CLUTCH (2.5-MM THK)
200.	238-3307 B	[2]	DISC-CLUTCH (2-MM THK)
	238-3308 B	[2]	DISC-CLUTCH (3-MM THK)
	238-3309 B	[2]	DISC-CLUTCH (2.5-MM THK)
203.	375-1360	[2]	WASHER-THRUST (10X40.2X5.1-MM THK)
204.	375-8264	[2]	CAGE-PINION
205.	375-1359	[6]	GEAR-PLANETARY
207.	110-4737	[6]	RING-RETAINING
208.	6V-3668 M	[4]	BOLT (M12X1.75X30-MM)
209.	243-5336 M	[2]	BOLT (M10X1.5X20-MM)
210.	333-8037	[20]	STUD-WHEEL
211.	6V-2652	[4]	CONE-BEARING

			PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP68420193

275-4912: COUPLING GP-FLEXIBLE

COUPLING GP-FLEXIBLE

275-4912 COUPLING GP-FLEXIBLE
S/N CH91-UP
PART OF 354-7270 INSTALLATION AR
ALSO AN ATTACHMENT

i05970847 SEBP6842

2754912 COUPLING GP-FLEXIBLE Parts scheme

For full view, you need register

Parts for your M320D2 WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	134-9680 Y	[1]	COUPLING GP-PUMP
2.	7X-3174	[8]	BOLT (3/8-24X1.375-IN)
	Y		SEPARATE ILLUSTRATION

#SEBP68420194

453-7111: POWER TRAIN AR

POWER TRAIN AR

453-7111 POWER TRAIN AR
S/N CH91-UP
PART OF 449-2823 COMMON AR
ALSO AN ATTACHMENT

i05934411 SEBP6842

For full view, you need register

Parts for your M320D2 WHEELED EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
241-7435 Y	[1]	AXLE & MTG AR-FRONT
241-7436 Y	[1]	AXLE & MTG AR-REAR
257-1709 Y	[1]	MOTOR & MTG GP-TRAVEL
228-3839 Y	[1]	SHAFT GP-DRIVE
Y		SEPARATE ILLUSTRATION

#SEBP68420195

110-6135: SHAFT GP-DRIVE

SHAFT GP-DRIVE

110-6135 SHAFT GP-DRIVE -CARRIER BEARING
S/N CH91-UP
PART OF 228-3839 SHAFT GP-DRIVE
ALSO AN ATTACHMENT

i05510130 SEBP6842

For full view, you need register

Parts for your M320D2 WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	237-4163	[1]	HOUSING-BRAKE
2.	5W-0116	[1]	SHAFT
3.	5W-0118	[2]	FLANGE
4.	5W-0119	[2]	FLANGE-BRAKE
5.	5W-0122	[2]	SPACER
6.	5W-1422 B	[2]	WASHER (80X100X0.1-MM THK)
7.	5W-2750	[2]	BUSHING
8.	8B-5972	[2]	BALL BEARING
9.	5W-6355	[1]	PLUG
10.	5W-8380	[2]	SEAL
11.	5W-1418 B	[3]	WASHER (28X40X0.1-MM THK)
12.	5W-1419 B	[5]	WASHER (28X40X0.3-MM THK)
13.	5W-1420 B	[5]	WASHER (28X40X1-MM THK)
14.	5W-1693	[1]	WASHER (10.2X13.9X1-MM THK)
15.	8T-4183 M	[2]	BOLT (M12X1.75X40-MM)
16.	8T-4195 M	[12]	BOLT (M10X1.5X30-MM)
	B		USE AS REQUIRED
	M		METRIC PART

#SEBP68420196

228-3839: SHAFT GP-DRIVE

SHAFT GP-DRIVE

228-3839 SHAFT GP-DRIVE
S/N CH91-UP
PART OF 453-7111 POWER TRAIN AR
ALSO AN ATTACHMENT

i05970871 SEBP6842

For full view, you need register

Parts for your M320D2 WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	334-5425 M	[8]	BOLT-SOCKET HEAD (M10X1X28-MM)
2.	8T-4123	[4]	WASHER (22X35X3.5-MM THK)
3.	110-6135 Y	[1]	SHAFT GP-DRIVE (CARRIER BEARING)
4.	355-4816 Y	[1]	UNIVERSAL JOINT GP (REAR)
5.	316-8230 M	[16]	BOLT-SOCKET HEAD (M10X1X35-MM)
6.	112-9145 M	[32]	NUT (M10X1-THD)
7.	355-4815 Y	[1]	UNIVERSAL JOINT GP (FRONT)
8.	130-0458	[2]	ADAPTER
9.	7X-2565 M	[4]	BOLT (M20X2.5X100-MM)
10.	341-9167	[2]	BLOCK
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP68420197

426-3987: TIRE & RIM AR

TIRE & RIM AR

426-3987 TIRE & RIM AR
S/N CH91-UP
AN ATTACHMENT

i05510512 SEBP6842

For full view, you need register

Parts for your M320D2 WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	436-8723 Y	[2]	TIRE & RIM GP (LH)
2.	436-8724 Y	[2]	TIRE & RIM GP (RH)
	Y		SEPARATE ILLUSTRATION

#SEBP68420198

443-7807: TIRE & RIM AR

TIRE & RIM AR

443-7807 TIRE & RIM AR
S/N CH91-UP
PART OF 453-8185 DISTRIBUTION AR
AN ATTACHMENT

i05510452 SEBP6842

For full view, you need register

Parts for your M320D2 WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	326-7949	[4]	RING-TIRE
2.	436-8723 Y	[2]	TIRE & RIM GP (LH)
3.	436-8724 Y	[2]	TIRE & RIM GP (RH)
	Y		SEPARATE ILLUSTRATION

#SEBP68420199

473-2842: TIRE & RIM AR

TIRE & RIM AR

473-2842 TIRE & RIM AR
S/N CH91-UP
PART OF 473-2841 DISTRIBUTION AR
AN ATTACHMENT

i06019379 SEBP6842

For full view, you need register

Parts for your M320D2 WHEELED EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
464-3050 Y	[2]	TIRE & RIM GP (LH)
464-3051 Y	[2]	TIRE & RIM GP (RH)
Y		SEPARATE ILLUSTRATION

Information:

POWER TRAIN

AXLE GP

Operation and Maintenance Manual

Axle Oil Level (Front) - Check
M320D2 and M322D2 Wheeled Excavators and M322D2 MH and M324D2 MH Wheeled Material Handlers

Axle Oil Level (Rear) - Check
M320D2 and M322D2 Wheeled Excavators and M322D2 MH and M324D2 MH Wheeled Material Handlers

Axle Oil Sample - Obtain
M320D2 and M322D2 Wheeled Excavators and M322D2 MH and M324D2 MH Wheeled Material Handlers

Axle Bearings (Front) - Lubricate
M320D2 and M322D2 Wheeled Excavators and M322D2 MH and M324D2 MH Wheeled Material Handlers

Axle Oil (Front) - Change
M320D2 and M322D2 Wheeled Excavators and M322D2 MH and M324D2 MH Wheeled Material Handlers

Axle Oil (Rear) - Change
M320D2 and M322D2 Wheeled Excavators and M322D2 MH and M324D2 MH Wheeled Material Handlers

Oscillating Axle Control
M320D2 and M322D2 Wheeled Excavators and M322D2 MH and M324D2 MH Wheeled Material Handlers

Wheel Nut Torque - Check
M320D2 and M322D2 Wheeled Excavators and M322D2 MH and M324D2 MH Wheeled Material Handlers

Axle Oscillation Bearings - Lubricate - If Equipped
M320D2 and M322D2 Wheeled Excavators and M322D2 MH and M324D2 MH Wheeled Material Handlers

Specifications

Axle (Front) - Mounting
M320D2 Wheeled Excavator Machine System Specifications

Axle (Rear)
M320D2 Wheeled Excavator Machine System Specifications

Systems Operation

Solenoid Valve (Oscillating Axle) - Heavy Lift
M320D2 Wheeled Excavator Hydraulic System

Oscillating Axle Control Function
M313D, M315D, M315D Series 2, M315D2, M316D, M317D Series 2, M317D2, M318D, M320D2, M322D, M322D 2 MH, M322D2 and M324D 2 MH Wheeled Excavators Electronic System

Transmission
M320D2 Wheeled Excavator Hydraulic System

Oscillating Axle
M320D2 Wheeled Excavator Hydraulic System

Axle (Front and Rear)
M320D2 Wheeled Excavator Hydraulic System

Reuse And Salvage Guidelines

Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}

Contamination Control Guidelines

Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}

Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}

Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}

Testing and Adjusting

Axle (Steering Alignment) - Test and Adjust
M320D2 Wheeled Excavator Hydraulic System

Axle (Steering Positive Stop) - Test and Adjust
M320D2 Wheeled Excavator Hydraulic System