AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

337-5778 WIRING GP-STABILIZER -FRONT & REAR, LH & RH S/N P6K1-UP PART OF 416-9664, 416-9668, 416-9669, 416-9670, 416-9671, 416-9673 UNDERCARRIAGE AR AN ATTACHMENT M316D


ELECTRICAL AND STARTING SYSTEM
WIRING GP
POWER TRAIN
AXLE GP

WHEELED EXCAVATOR M316D WHEELED EXCAVATOR P6K
 M316D Wheeled Excavator P6K00001-UP (MACHINE) POWERED BY C6.6 Engine SEBP6844 M316D P6K   (2014)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-MONITOR
337-5814 WIRING GP-MONITOR
WIRING GP-RIDE CONTROL
337-5792 WIRING GP-RIDE CONTROL
WIRING GP-STABILIZER
337-5778 WIRING GP-STABILIZER
WIRING GP-STABILIZER
364-2785 WIRING GP-STABILIZER
WIRING GP-UNDERCARRIAGE/SWIVEL
242-5028 WIRING GP-UNDERCARRIAGE/SWIVEL
WIRING GP-WORK TOOL
337-5784 WIRING GP-WORK TOOL
 

#SEBP68440180
 

337-5778: WIRING GP-STABILIZER

337-5778 WIRING GP-STABILIZER -FRONT & REAR, LH & RH
S/N P6K1-UP
PART OF 416-9664, 416-9668, 416-9669, 416-9670, 416-9671, 416-9673 UNDERCARRIAGE AR
AN ATTACHMENT
i04169369 SEBP6844
3375778 WIRING GP-STABILIZER Parts scheme
  For full view, you need register

Parts for your M316D WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 337-5779 [1] HARNESS AS-CONSOLE (STABILIZER)  
  292-2896 E CONDUIT (61-CM)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8L-8413 [8] STRAP-CABLE (WHITE)  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [1] PLUG-SEAL  
  104-1995 [16] TERMINAL-BLADE (14-GA TO 18-GA)  
  111-7898 [4] CONNECTOR (8-PIN)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM)  
  9X-3402 [4] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  230-5008 [1] PLUG AS-CONNECTOR (4-PIN)  
  264-7031 [1] SEAL-CONNECTOR  
2. 7K-1181 B [3] STRAP-CABLE  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
 

#SEBP68440181
 

364-2785: WIRING GP-STABILIZER

364-2785 WIRING GP-STABILIZER -UNDERCARRIAGE
S/N P6K1-UP
PART OF 416-9664, 416-9668, 416-9669, 416-9670, 416-9671, 416-9673 UNDERCARRIAGE AR
AN ATTACHMENT
i04169489 SEBP6844
3642785 WIRING GP-STABILIZER Parts scheme
  For full view, you need register

Parts for your M316D WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5C-9553 M [2] BOLT (M6X1X16-MM)  
2. 5P-4116 [2] WASHER-HARD (8.8X20.5X2-MM THK)  
3. 175-3350 [1] PLUG AS-CONNECTOR  
4. 175-3352 [1] PLUG AS-CONNECTOR  
5. 199-6978 [1] ROD  
6. 237-0075 [1] HARNESS AS-SENSOR (TRAVEL SPEED)  
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDE RECEPTACLE AS & WEDGE)
  114-8843 E SLEEVE-PLASTIC (25-CM)  
  128-4178 [1] TERMINAL AS  
  2L-8068 [1] TERMINAL-RING (10-GA TO 12-GA, 5/16-IN SCREW)  
  5P-6006 D TUBE-HEAT SHRINK (9.52-MM DIA)(0.1-M)  
7. 249-6923 Y [1] SWIVEL GP-ELECTRIC  
8. 364-2786 [1] HARNESS AS-SOLENOID  
  8T-8729 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  155-2270 [4] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDE RECEPTACLE AS & WEDGE)
  104-6692 [2] RECEPTACLE AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  8T-8737 [2] PLUG-SEAL  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDE RECEPTACLE AS & WEDGE)
  8T-8730 [8] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  131-1497 [1] TERMINAL AS-RING (10-GA TO 12-GA)  
  2L-8068 [1] TERMINAL-RING (10-GA TO 12-GA, 5/16-IN SCREW)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(4-CM)  
9. 3F-9556 [1] LOCKWASHER  
10. 3S-2093 B [24] STRAP-CABLE  
11. 5C-7261 M [1] NUT (M8X1.25-THD)  
12. 155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
13. 155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDEG & INTERFACE SEAL)
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP68440182
 

242-5028: WIRING GP-UNDERCARRIAGE/SWIVEL

242-5028 WIRING GP-UNDERCARRIAGE/SWIVEL
S/N P6K1-UP
PART OF 416-9665, 416-9666, 432-6555 UNDERCARRIAGE AR
AN ATTACHMENT
i02174459 SEBP6844
2425028 WIRING GP-UNDERCARRIAGE/SWIVEL Parts scheme
  For full view, you need register

Parts for your M316D WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
2. 199-6978 [1] ROD  
3. 237-0075 [1] HARNESS AS-SENSOR (TRAVEL SPEED)  
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  114-8843 E SLEEVE-PLASTIC (25-CM)  
  128-4178 [1] TERMINAL AS  
  2L-8068 [1] TERMINAL-RING (10-GA TO 12-GA, 5/16-IN SCREW)  
  5P-6006 L [1] TUBE-HEAT SHRINK (9.52-MM DIA)(10-DM)  
4. 377-1953 Y [1] SWIVEL GP-ELECTRIC  
5. 355-4378 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
6. 3F-9556 [2] LOCKWASHER  
7. 3S-2093 [5] STRAP-CABLE  
8. 5C-7261 M [1] NUT (M8X1.25-THD)  
9. 5C-9553 M [2] BOLT (M6X1X16-MM)  
10. 5P-4116 [1] WASHER-HARD (8.8X20.5X2-MM THK)  
  E   ORDER BY THE CENTIMETER
  L   ORDER BY THE DECIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP68440183
 

337-5784: WIRING GP-WORK TOOL

337-5784 WIRING GP-WORK TOOL -MULTIFUNCTION COMBINED VALVE
S/N P6K1-UP
PART OF 392-9598 VALVE & LINES AR-AUXILIARY
AN ATTACHMENT
i04158493 SEBP6844
3375784 WIRING GP-WORK TOOL Parts scheme
  For full view, you need register

Parts for your M316D WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 337-5785 [1] HARNESS AS-WORK TOOL  
  230-5011 [1] RECEPTACLE AS-CONNECTOR (6-PIN)  
  155-2270 [4] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  8T-8729 [6] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [8] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)  
2. 3S-2093 B [2] STRAP-CABLE  
3. 7K-1181 B [2] STRAP-CABLE  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
 

#SEBP68440184
 

241-7435: AXLE & MTG AR-FRONT

241-7435 AXLE & MTG AR-FRONT
S/N P6K1-UP
PART OF 252-7278 AXLE AR-FRONT
AN ATTACHMENT
i03642541 SEBP6844
2417435 AXLE & MTG AR-FRONT Parts scheme
  For full view, you need register

Parts for your M316D WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5W-0965 [20] RING  
2. 110-2170 [1] PIN  
3. 128-7901 [2] ELBOW AS  
4. 243-0919 [2] FITTING  
5. 303-9446 [20] LOCKWASHER  
6. 331-1380 CY [1] AXLE GP-STEERING  
7. 388-7608 [2] PLATE AS  
8. 133-2717 B [1] SHIM (0.5-MM THK)  
9. 093-0065 B [1] SHIM (1-MM THK)  
10. 176-5311 M [1] LOCKNUT (M16X2-THD)  
11. 303-9445 M [20] NUT-HEX FLANGE (M22X1.5-THD)  
12. 6V-6560 [2] SEAL-O-RING  
13. 7X-2475 M [1] BOLT (M16X2X130-MM)  
14. 8T-4779 M [8] BOLT (M16X2X35-MM)  
15. 9X-8257 [1] WASHER (17.5X30X3.5-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP68440185
 

241-7443: AXLE & MTG AR-FRONT

241-7443 AXLE & MTG AR-FRONT -WIDE
S/N P6K1-UP
PART OF 394-5009 AXLE AR-WIDE
AN ATTACHMENT
i03643414 SEBP6844
2417443 AXLE & MTG AR-FRONT Parts scheme
  For full view, you need register

Parts for your M316D WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5W-0965 [20] RING  
2. 110-2170 [1] PIN  
3. 128-7901 [2] ELBOW AS  
4. 093-0065 B [1] SHIM (1-MM THK)  
5. 243-0919 [2] FITTING  
6. 303-9446 [20] LOCKWASHER  
7. 331-1395 CY [1] AXLE GP-STEERING (WIDE)  
8. 388-7608 [2] PLATE AS  
9. 133-2717 B [1] SHIM (0.5-MM THK)  
10. 176-5311 M [1] LOCKNUT (M16X2-THD)  
11. 303-9445 M [20] NUT-HEX FLANGE (M22X1.5-THD)  
12. 6V-6560 [2] SEAL-O-RING  
13. 7X-2475 M [1] BOLT (M16X2X130-MM)  
14. 8T-7338 M [8] BOLT (M16X2X45-MM)  
15. 9X-8257 [1] WASHER (17.5X30X3.5-MM THK)  
16. 252-0237 [2] PLATE  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP68440186
 

241-7436: AXLE & MTG AR-REAR

241-7436 AXLE & MTG AR-REAR
S/N P6K1-UP
PART OF 252-7278 AXLE AR-FRONT
AN ATTACHMENT
i03642974 SEBP6844
2417436 AXLE & MTG AR-REAR Parts scheme
  For full view, you need register

Parts for your M316D WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5W-0965 [20] RING  
2. 8T-4123 [16] WASHER (3.62X5.75X0.375-MM THK)  
3. 8U-5923 [2] FITTING AS  
4. 303-9446 [20] LOCKWASHER  
5. 303-9445 M [20] NUT-HEX FLANGE (M22X1.5-THD)  
6. 331-1385 CY [1] AXLE & TRANSMISSION AR  
7. 241-6199 [1] ELBOW AS  
  6V-8398 [1] SEAL-O-RING  
  8T-6850 [1] SEAL-O-RING  
  241-6192 [1] ELBOW  
8. 4I-6766 M [8] BOLT (M20X2.5X230-MM)  
9. 6V-6560 [2] SEAL-O-RING  
10. 6V-7688 M [8] LOCKNUT (M20X2.5-THD)  
11. 6V-8398 [3] SEAL-O-RING  
12. 8T-6850 [1] SEAL-O-RING  
13. 8T-7488 [1] CONNECTOR  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP68440187
 

331-1385: AXLE & TRANSMISSION AR

331-1385 AXLE & TRANSMISSION AR -REAR
S/N P6K1-UP
PART OF 241-7436 AXLE & MTG AR-REAR
AN ATTACHMENT
i05327053 SEBP6844
3311385 AXLE & TRANSMISSION AR Parts scheme 3311385 AXLE & TRANSMISSION AR Parts scheme
  For full view, you need register

Parts for your M316D WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 416-1916 CY [1] TRANSMISSION GP (DIRECT DRIVE)  
2. 333-8041 [2] HOUSING-AXLE  
3. 333-8042 [2] SHAFT-AXLE  
4. 233-8738 [1] HOUSING  
5. 054-6514 B [2] SHIM (0.1-MM THK)  
  121-7679 B [2] SHIM (0.15-MM THK)  
  054-6513 B [2] SHIM (0.2-MM THK)  
  121-7680 B [2] SHIM (0.25-MM THK)  
  054-6512 B [2] SHIM (0.3-MM THK)  
  121-7677 B [2] SHIM (0.45-MM THK)  
  121-7678 B [2] SHIM (0.55-MM THK)  
  7T-0552 B [2] SHIM (2-MM THK)  
  7T-0558 B [2] SHIM (1.4-MM THK)  
  7T-0560 B [2] SHIM (1-MM THK)  
  7T-0561 B [2] SHIM (0.8-MM THK)  
  7T-0562 B [2] SHIM (0.6-MM THK)  
  7T-0563 B [2] SHIM (0.5-MM THK)  
  7T-0564 B [2] SHIM (0.4-MM THK)  
  128-7675 B [2] SHIM (0.35-MM THK)  
  128-7676 B [2] SHIM (0.65-MM THK)  
  128-7677 B [2] SHIM (0.7-MM THK)  
  128-7680 B [2] SHIM (0.75-MM THK)  
  128-7681 B [2] SHIM (0.85-MM THK)  
  128-7683 B [2] SHIM (0.9-MM THK)  
  128-7684 B [2] SHIM (0.95-MM THK)  
  128-7685 B [2] SHIM (1.05-MM THK)  
  128-7686 B [2] SHIM (1.1-MM THK)  
  128-7687 B [2] SHIM (1.15-MM THK)  
  128-7688 B [2] SHIM (1.25-MM THK)  
  128-7689 B [2] SHIM (1.3-MM THK)  
  128-7690 B [2] SHIM (1.35-MM THK)  
  128-7691 B [2] SHIM (1.45-MM THK)  
  128-7692 B [2] SHIM (1.5-MM THK)  
  128-7693 B [2] SHIM (1.55-MM THK)  
  128-7694 B [2] SHIM (1.6-MM THK)  
  128-7695 B [2] SHIM (1.65-MM THK)  
  202-8137 B [2] SHIM (1.47-MM THK)  
  202-8138 B [2] SHIM (1.63-MM THK)  
  202-8139 B [2] SHIM (1.75-MM THK)  
  202-8140 B [2] SHIM (1.7-MM THK)  
  202-8141 B [2] SHIM (1.8-MM THK)  
  202-8142 B [2] SHIM (1.85-MM THK)  
  202-8143 B [2] SHIM (1.9-MM THK)  
  202-8144 B [2] SHIM (1.95-MM THK)  
45. 6Y-2942 [2] BEARING-TAPERED ROLLER  
46. 6Y-2943 [2] CUP-BEARING (TAPERED ROLLER)  
47. 8U-6079 [2] SEAL-O-RING  
48. 5W-5627 M [32] BOLT (M18X2.5X60-MM)  
49. 263-3629 [3] PLUG AS  
    (EACH INCLUDES)
  203-0215 [1] SEAL-O-RING  
50. 203-0215 [1] SEAL-O-RING  
51. 263-3630 [1] PLUG AS-MAGNET (AXLE HOUSING)  
52. 8T-4183 M [4] BOLT (M12X1.75X40-MM)  
53. 6V-8149 M [10] NUT (M12X1.75-THD)  
54. 372-4119 [1] GEAR-CROWN  
55. 371-7328 [1] CASE-DIFFERENTIAL  
56. 331-1391 [1] COVER  
58. 331-1393 [2] WASHER-THRUST  
59. 416-2319 C [2] GEAR-DIFFERENTIAL  
60. 331-1396 [4] GEAR-DIFFERENTIAL  
61. 331-1397 [4] WASHER-THRUST  
62. 331-1398 [1] SHAFT  
63. 331-1399 [2] SHAFT  
64. 204-3975 [2] PIN-SPRING  
65. 336-7377 M [16] BOLT-SOCKET HEAD (M12X1.5X35-MM)  
66. 233-8739 [2] HUB GP-WHEEL  
    (EACH INCLUDES)
66A. 243-0378 [1] NUT  
67. 5W-5682 [2] VALVE AS-PURGE (AXLE)  
68. 8T-4140 M [28] BOLT (M16X2X60-MM)  
69. 8U-5927 [2] SEAL-O-RING  
70. 375-2548 [2] GEAR-SUN  
71. 203-5417 [2] SEAL-LIP TYPE  
72. 121-8167 [4] BEARING-ROLLER  
73. 238-3298 [2] SLEEVE-SPACER  
74. 333-8029 [2] HUB-FLANGE  
75. 7X-5762 [2] SEAL-O-RING  
76. 263-3701 [2] GEAR-CARRIER  
77. 320-9728 [4] SEAL-O-RING  
78. 320-9731 [2] SEAL-O-RING  
79. 298-2314 [2] GEAR-INTERNAL  
80. 328-8804 [2] PISTON  
81. 263-4057 [8] DOWEL  
82. 355-2319 [2] SEAL  
83. 238-3303 [2] RING (2-MM THK)  
84. 8U-0754 [2] SEAL  
85. 238-3304 [2] RING (2-MM THK)  
86. 8U-3592 [16] SPRING  
87. 238-3305 [16] SPRING  
88. 298-2315 [16] BOLT-SPECIAL  
89. 8U-3591 [16] SPACER (6.5X15X7-MM THK)  
90. 263-3704 [12] DISC-CLUTCH (4.5-MM THK)  
91. 238-3309 B [12] DISC-CLUTCH (2.5-MM THK)  
92. 238-3307 B [2] DISC-CLUTCH (2-MM THK)  
93. 238-3308 B [2] DISC-CLUTCH (3-MM THK)  
95. 375-1360 [2] WASHER-THRUST (10X40.2X5.1-MM THK)  
96. 375-8264 [2] CAGE-PINION  
97. 375-1359 [6] GEAR-PLANETARY  
99. 110-4737 [6] RING-RETAINING  
100. 6V-3668 M [4] BOLT (M12X1.75X30-MM)  
101. 243-5336 M [2] BOLT (M10X1.5X20-MM)  
102. 333-8037 [20] STUD-WHEEL  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP68440188
 

331-1400: AXLE & TRANSMISSION AR

331-1400 AXLE & TRANSMISSION AR
S/N P6K1-UP
PART OF 394-5010 AXLE AR-REAR
AN ATTACHMENT
i05327081 SEBP6844
3311400 AXLE & TRANSMISSION AR Parts scheme
  For full view, you need register

Parts for your M316D WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 416-1916 CY [1] TRANSMISSION GP (DIRECT DRIVE)  
2. 333-8043 [2] HOUSING-AXLE  
3. 333-8044 [2] SHAFT-AXLE  
4. 233-8738 [1] HOUSING  
5. 054-6514 B [2] SHIM (0.1-MM THK)  
  121-7679 B [2] SHIM (0.15-MM THK)  
  054-6513 B [2] SHIM (0.2-MM THK)  
  121-7680 B [2] SHIM (0.25-MM THK)  
  054-6512 B [2] SHIM (0.3-MM THK)  
  128-7675 B [2] SHIM (0.35-MM THK)  
  7T-0564 B [2] SHIM (0.4-MM THK)  
  121-7677 B [2] SHIM (0.45-MM THK)  
  7T-0563 B [2] SHIM (0.5-MM THK)  
  121-7678 B [2] SHIM (0.55-MM THK)  
  7T-0562 B [2] SHIM (0.6-MM THK)  
  128-7676 B [2] SHIM (0.65-MM THK)  
  128-7677 B [2] SHIM (0.7-MM THK)  
  128-7680 B [2] SHIM (0.75-MM THK)  
  7T-0561 B [2] SHIM (0.8-MM THK)  
  128-7681 B [2] SHIM (0.85-MM THK)  
  128-7683 B [2] SHIM (0.9-MM THK)  
  128-7684 B [2] SHIM (0.95-MM THK)  
  7T-0560 B [2] SHIM (1-MM THK)  
  128-7685 B [2] SHIM (1.05-MM THK)  
  128-7686 B [2] SHIM (1.1-MM THK)  
  128-7687 B [2] SHIM (1.15-MM THK)  
  128-7688 B [2] SHIM (1.25-MM THK)  
  128-7689 B [2] SHIM (1.3-MM THK)  
  128-7690 B [2] SHIM (1.35-MM THK)  
  7T-0558 B [2] SHIM (1.4-MM THK)  
  128-7691 B [2] SHIM (1.45-MM THK)  
  202-8137 B [2] SHIM (1.47-MM THK)  
  128-7692 B [2] SHIM (1.5-MM THK)  
  128-7693 B [2] SHIM (1.55-MM THK)  
  128-7694 B [2] SHIM (1.6-MM THK)  
  202-8138 B [2] SHIM (1.63-MM THK)  
  128-7695 B [2] SHIM (1.65-MM THK)  
  202-8139 B [2] SHIM (1.75-MM THK)  
  202-8140 B [2] SHIM (1.7-MM THK)  
  202-8141 B [2] SHIM (1.8-MM THK)  
  202-8142 B [2] SHIM (1.85-MM THK)  
  202-8143 B [2] SHIM (1.9-MM THK)  
  202-8144 B [2] SHIM (1.95-MM THK)  
  7T-0552 B [2] SHIM (2-MM THK)  
45. 6Y-2942 [2] BEARING-TAPERED ROLLER  
46. 6Y-2943 [2] CUP-BEARING (TAPERED ROLLER)  
47. 8U-6079 [2] SEAL-O-RING  
48. 5W-5627 M [32] BOLT (M18X2.5X60-MM)  
49. 263-3629 [3] PLUG AS  
    (EACH INCLUDES)
  203-0215 [1] SEAL-O-RING  
50. 203-0215 [1] SEAL-O-RING  
51. 263-3630 [1] PLUG AS-MAGNET (AXLE HOUSING)  
52. 8T-4183 M [4] BOLT (M12X1.75X40-MM)  
53. 6V-8149 M [10] NUT (M12X1.75-THD)  
54. 372-4119 [1] GEAR-CROWN  
55. 371-7328 [1] CASE-DIFFERENTIAL  
56. 331-1391 [1] COVER  
58. 331-1393 [2] WASHER-THRUST  
59. 416-2319 [2] GEAR-DIFFERENTIAL  
60. 331-1396 [4] GEAR-DIFFERENTIAL  
61. 331-1397 [4] WASHER-THRUST  
62. 331-1398 [1] SHAFT  
63. 331-1399 [2] SHAFT  
64. 204-3975 [2] PIN-SPRING  
65. 336-7377 M [16] BOLT-SOCKET HEAD (M12X1.5X35-MM)  
66. 233-8739 [2] HUB GP-WHEEL  
    (EACH INCLUDES)
  243-0378 [1] NUT  
67. 5W-5682 [2] VALVE AS-PURGE (AXLE)  
68. 8T-4140 M [28] BOLT (M16X2X60-MM)  
69. 8U-5927 [2] SEAL-O-RING  
70. 375-2548 [2] GEAR-SUN  
71. 203-5417 [2] SEAL-LIP TYPE  
72. 121-8167 [4] BEARING-ROLLER  
73. 238-3298 [2] SLEEVE-SPACER  
74. 333-8029 [2] HUB-FLANGE  
75. 7X-5762 [2] SEAL-O-RING  
76. 263-3701 [2] GEAR-CARRIER  
77. 320-9728 [4] SEAL-O-RING  
78. 320-9731 [2] SEAL-O-RING  
79. 298-2314 [2] GEAR-INTERNAL  
80. 328-8804 [2] PISTON  
81. 263-4057 [8] DOWEL  
82. 355-2319 [2] SEAL  
83. 238-3303 [2] RING (2-MM THK)  
84. 8U-0754 [2] SEAL  
85. 238-3304 [2] RING (2-MM THK)  
86. 8U-3592 [16] SPRING  
87. 238-3305 [16] SPRING  
88. 298-2315 [16] BOLT-SPECIAL  
89. 8U-3591 [16] SPACER (6.5X15X7-MM THK)  
90. 263-3704 [12] DISC-CLUTCH (4.5-MM THK)  
91. 238-3309 [10] DISC-CLUTCH (2.5-MM THK)  
92. 238-3307 B [2] DISC-CLUTCH (2-MM THK)  
93. 238-3308 B [2] DISC-CLUTCH (3-MM THK)  
94. 238-3309 B [2] DISC-CLUTCH (2.5-MM THK)  
95. 375-1360 [2] WASHER-THRUST (10X40.2X5.1-MM THK)  
96. 375-8264 [2] CAGE-PINION  
97. 375-1359 [6] GEAR-PLANETARY  
99. 110-4737 [6] RING-RETAINING  
100. 6V-3668 M [4] BOLT (M12X1.75X30-MM)  
101. 243-5336 M [2] BOLT (M10X1.5X20-MM)  
102. 333-8037 [20] STUD-WHEEL  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP68440189
 

252-7278: AXLE AR-FRONT

252-7278 AXLE AR-FRONT -DISC BRAKE
S/N P6K1-UP
PART OF 416-9664, 416-9665, 416-9666, 416-9668, 416-9669, 416-9670, 416-9671 UNDERCARRIAGE AR
AN ATTACHMENT
i02613589 SEBP6844
  For full view, you need register

Parts for your M316D WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  241-7435 Y [1] AXLE & MTG AR-FRONT  
  241-7436 Y [1] AXLE & MTG AR-REAR  
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Electric Starting System - Test
C6.6 Engines for Caterpillar Built Machines

Caterpillar Parts SIS Catalog M316D :

WIRING GP-RIDE CONTROL
337-5792 WIRING GP-RIDE CONTROL
WIRING GP-MONITOR
337-5814 WIRING GP-MONITOR
WIRING GP-MIRROR
337-5800 WIRING GP-MIRROR
WIRING GP-MIRROR
273-4821 WIRING GP-MIRROR
WIRING GP-MACHINE
337-5803 WIRING GP-MACHINE
WIRING GP-FAN
314-2880 WIRING GP-FAN
WIRING GP-FAN
314-2878 WIRING GP-FAN
WIRING GP-FAN
297-1603 WIRING GP-FAN
WIRING GP-STABILIZER
364-2785 WIRING GP-STABILIZER
WIRING GP-UNDERCARRIAGE/SWIVEL
242-5028 WIRING GP-UNDERCARRIAGE/SWIVEL
WIRING GP-WORK TOOL
337-5784 WIRING GP-WORK TOOL
AXLE & MTG AR-FRONT
241-7435 AXLE & MTG AR-FRONT
AXLE & MTG AR-FRONT
241-7443 AXLE & MTG AR-FRONT
AXLE & MTG AR-REAR
241-7436 AXLE & MTG AR-REAR
AXLE & TRANSMISSION AR
331-1385 AXLE & TRANSMISSION AR
AXLE & TRANSMISSION AR
331-1400 AXLE & TRANSMISSION AR

Truck sale:

Caterpillar M316D
 
Caterpillar M316D
- wheel excavator
ZEPPELIN BAUMASCHINEN
 
52,330 
Caterpillar M316D, wheel excavator, Construction
- wheel excavator
ZEPPELIN BAUMASCHINEN
Caterpillar M316D, wheel excavator, Construction
55,000 
Caterpillar M316D, wheel excavator, Construction
- wheel excavator
GREGORY POOLE EQUIPMENT CO.
 
 
Caterpillar M316D, wheel excavator, Construction
- wheel excavator
BERGERAT MONNOYEUR S.A.S.
Caterpillar M316D
 
Caterpillar M316D
- wheel excavator
MACALLISTER MACHINERY CO., INC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.