445-5882 WIRING GP-CAB -BACK S/N AS21-UP PART OF 376-3481 CAB AR ALSO AN ATTACHMENT 226B3 SKID STEER LOADER

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 445-5882 WIRING GP-
1. 328-2350 WIRING GP-

SWITCH GP

2. 328-2338 WIRING GP-
3. 328-2338 WIRING GP-

HORN GP-ELECTRIC

4. 230-3743 WIRING GP-

WIRING GP

5. 328-2342 WIRING GP-
6. 373-6255 WIRING GP-
7. 375-6446 WIRING GP-

POWER TRAIN

AXLE GP

8. 142-8758 AXLE GP
9. 261-6255 AXLE GP
0. INFORMATION

SKID STEER LOADER 226B3 SKID STEER LOADER AS2
226B3 Skid Steer Loader AS200001-UP (MACHINE) POWERED BY C2.2 Engine SEBP6861 226B3 AS2 (2013)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

225-7948 WIRING GP-AIR CONDITIONER

328-2272 WIRING GP-CAB

445-5882 WIRING GP-CAB

328-2350 WIRING GP-CHASSIS

328-2338 WIRING GP-ENGINE

#SEBP68610110

445-5882: WIRING GP-CAB

WIRING GP-CAB

445-5882 WIRING GP-CAB -BACK
S/N AS21-UP
PART OF 376-3481 CAB AR
ALSO AN ATTACHMENT

i06285149 SEBP6861

For full view, you need register

Parts for your 226B3 SKID STEER LOADER:

Pos.	Part No	Qty	Parts name
1.	6I-1418	[4]	SPACER (8.2X12.7X28.7-MM THK)
2.	7G-1060	[1]	STRAP AS-GROUND
3.	7K-1181	[11]	STRAP-CABLE
4.	8F-7242	[3]	WASHER (8.7X15.9X1.6-MM THK)
5.	8T-9655	[8]	MOUNT-ISOLATION
6.	116-7471	[1]	PULLER-MINIFUSE
7.	180-9900	[1]	CAP AS
	5P-7958	[1]	SLEEVE-CABLE SPLICE
	8C-6354	[1]	CAP-RECEPTACLE (ET CONNECTOR)
	179-9392	[1]	LANYARD
8.	258-4135 Y	[2]	RELAY GP (12-VOLT)(MAIN POWER)
9.	258-4136	[1]	FUSE AS
	267-2680	[2]	FUSE (20-AMPERE)(POWER MODULE)
	267-5211	[1]	SEAL
	267-5213	[1]	COVER
10.	258-4138	[1]	FILM-INFORMATION (POWER DISTRIBUTION)
11.	258-4143	[1]	BAR-BUS
12.	258-4196	[2]	WIRE AS (10-GA)
13.	267-2680	[2]	FUSE (20-AMPERE)(FUSE BLOCK)
14.	328-2345 Y	[1]	ELECTRONICS GP-MACHINE
15.	343-6885	[1]	FILM-IDENTIFICATION (FUSE, RELAY PANEL)
16.	396-0690 Y	[1]	HARNESS AS-CAB
17.	435-4593	[1]	FILM-IDENTIFICATION (FUSE, RELAY PANEL)
18.	132-5789	[1]	CLIP (LADDER)
19.	1A-8912	[10]	WASHER (6.7X12.7X1.6-MM THK)
20.	1H-3244	[4]	LOCKWASHER
21.	3S-2093	[5]	STRAP-CABLE
22.	4P-7581	[2]	CLIP (LADDER)
23.	4P-8134	[2]	CLIP (LADDER)
24.	5C-2890 M	[10]	NUT (M6X1-THD)
25.	5C-7261 M	[7]	NUT (M8X1.25-THD)
26.	5P-7162	[8]	SCREW-MACHINE (10-32X0.5-IN)
27.	6V-7728 M	[3]	BOLT (M6X1X45-MM)
28.	7G-7053	[1]	GROMMET
29.	7P-1695	[2]	WASHER (10.5X19X3-MM THK)
30.	7X-0579	[4]	WASHER-HARD (8.8X25.5X2-MM THK)
31.	8T-4133 M	[2]	NUT (M10X1.5-THD)
32.	8T-4205	[3]	WASHER-HARD (7.2X14.5X2-MM THK)
33.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
34.	103-2543 E		SEAL (3-CM EACH)
35.	9X-2092 E		TRIM-EDGE (15-CM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP68610111

328-2350: WIRING GP-CHASSIS

WIRING GP-CHASSIS

328-2350 WIRING GP-CHASSIS
S/N AS21-UP
PART OF 326-4781 CHASSIS AR
ALSO AN ATTACHMENT

i04716870 SEBP6861

For full view, you need register

Parts for your 226B3 SKID STEER LOADER:

Pos.	Part No	Qty	Parts name
1.	7K-1181 C	[20]	STRAP-CABLE
2.	8M-4963	[1]	STRAP AS-GROUND
3.	161-2539	[1]	ALARM AS (BACKUP)(TRAVEL)
	4B-2043	[2]	NUT (8-32-THD)
4.	178-7539	[1]	RECEPTACLE AS (POWER SUPPLY)
5.	192-0836	[1]	SWITCH GP-PRESSURE (BACKUP ALARM)
	102-8802	[2]	KIT-RECEPTACLE (2-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	3J-1907	[1]	SEAL-O-RING
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
6.	235-1845	[1]	FUSE (100-AMPERE)(MAIN)
7.	267-2744	[1]	HOLDER AS-FUSE
	5C-7261 M	[2]	NUT (M8X1.25-THD)
	7X-0608	[2]	WASHER-HARD (10.2X16X2-MM THK)
	264-3617	[2]	LOCKWASHER
	267-2746	[1]	COVER AS
8.	374-7463 BC	[2]	CAP-SEAL
9.	374-7465 BC	[3]	CAP-SEAL
11.	374-7467 BC	[1]	CAP-SEAL
12.	328-2340	[1]	HARNESS AS-LIGHTING (REAR)
	8T-8729	[6]	PIN-CONNECTOR (16-GA TO 18-GA)
	9W-0852	[1]	PIN-CONNECTOR (14-GA TO 16-GA)
	155-2271	[2]	KIT-CONNECTING PLUG (4-PIN)
			(EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	8T-8737	[1]	PLUG-SEAL
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8730	[8]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[2]	STRAP-CABLE
	7N-9017	[2]	TERMINAL-RING (18-GA TO 22-GA, NO. 10 SCREW)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)
13.	373-6259 C	[1]	HARNESS AS-PLATFORM
	374-7463	[3]	CAP-SEAL
	8T-8729	[9]	PIN-CONNECTOR (16-GA TO 18-GA)
	9W-0852	[14]	PIN-CONNECTOR (14-GA TO 16-GA)
	9X-3401	[7]	PIN-CONNECTOR (16-GA TO 18-GA)
	127-5483	[1]	PLUG AS-CONNECTOR (1-PIN)
	155-2255	[3]	KIT-CONNECTING PLUG (12-PIN)
	155-2265	[2]	KIT-CONNECTING PLUG (8-PIN)
	155-2270	[16]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[3]	KIT-CONNECTING PLUG (4-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	167-3693	[1]	PLUG AS-CONNECTOR (31-PIN)
	225-3854	[1]	PLUG AS-CONNECTOR (31-PIN)
	8T-8737	[11]	PLUG-SEAL
	8N-1549	[1]	SOCKET-CONNECTOR (4-GA)
	8T-8730	[44]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9W-0844	[18]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	194-5226	[55]	WIRE AS (16-GA)
			-OR-
	194-5227	[55]	WIRE AS (14-GA)
	3S-2093	[33]	STRAP-CABLE
	2L-8069	[2]	TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)
	2L-8079	[2]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	5P-4571	[2]	TERMINAL-BLADE (14-GA TO 16-GA)
	9G-4336	[1]	TERMINAL-RING (4-GA, 3/8-IN SCREW)
	7N-9017	[1]	TERMINAL-RING (18-GA TO 22-GA, NO. 10 SCREW)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(35-CM)
14.	132-5789	[3]	CLIP (LADDER)
15.	208-9277 M	[2]	BOLT-FLANGE HEAD (M6X1X20-MM)
16.	3S-2093	[15]	STRAP-CABLE
18.	5C-7261 M	[1]	NUT (M8X1.25-THD)
19.	5P-4115	[2]	WASHER-HARD (7.2X19X2-MM THK)
20.	6V-7728 M	[2]	BOLT (M6X1X45-MM)
21.	8F-7242	[1]	WASHER (8.7X15.9X1.6-MM THK)
22.	7P-1695	[3]	WASHER (10.5X19X3-MM THK)
23.	8T-4133 M	[3]	NUT (M10X1.5-THD)
24.	3F-9556	[1]	LOCKWASHER
25.	189-0852	[2]	HARNESS AS-WIRING (SPEED SENSOR)
			(EACH INCLUDES)
	9X-3401	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	9X-1813 E		SLEEVE (16-CM)
	194-5226	[2]	WIRE AS (16-GA)
			-OR-
	194-5227	[2]	WIRE AS (14-GA)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP68610112

328-2338: WIRING GP-ENGINE

WIRING GP-ENGINE

328-2338 WIRING GP-ENGINE
S/N AS21-UP
PART OF 326-5360 INSTALLATION AR-ENGINE
Type 1
ALSO AN ATTACHMENT

i03906915 SEBP6861

For full view, you need register

Parts for your 226B3 SKID STEER LOADER:

Pos.	Part No	Qty	Parts name
1.	7G-1060	[1]	STRAP AS-GROUND
2.	7K-1181	[7]	STRAP-CABLE
3.	115-1615	[1]	RELAY AS (12-VOLT)(START)
3A.	115-1615	[1]	RELAY AS (12-VOLT)(COLD START)
4.	172-9200	[1]	SUPPRESSOR-ARC
5.	326-9515	[1]	CABLE AS-BATTERY (POSITIVE)
	1S-7252	[1]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
	8N-0869	[1]	COVER-TERMINAL (RED)
	8N-1725	[1]	COVER AS-TERMINAL (RED)
	3S-6049	[1]	TERMINAL AS-BATTERY (POSITIVE)
	1M-6119	[1]	BOLT (5/16-18X1.375-IN)
	1M-6120	[1]	NUT (5/16-18-THD)
	159-8049 E		CABLE (00-GA, RED)(27-CM)
6.	328-2339	[1]	HARNESS AS-ENGINE
	289-3195 E		CONDUIT (148-CM)
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-3401	[8]	PIN-CONNECTOR (16-GA TO 18-GA)
	176-1477	[1]	PLUG AS (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
	155-2270	[5]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	9X-1054	[2]	PLUG AS-CONNECTOR (4-PIN)
	8T-8737	[1]	PLUG-SEAL
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	238-9397	[1]	RESISTOR AS
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	185-1861	[2]	SEAL-WIRE
	180-9340	[6]	SOCKET-CONNECTOR (14-GA TO 18-GA)
	186-3736	[8]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[5]	STRAP-CABLE
	189-3158	[1]	SUPPRESSOR-ARC
	2L-8065	[1]	TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW)
	5P-1478	[1]	TERMINAL-FORK (10-GA TO 12-GA, NO. 10 SCREW)
	9G-4336	[3]	TERMINAL-RING (4-GA, 3/8-IN SCREW)
	7N-9017	[2]	TERMINAL-RING (18-GA TO 22-GA, NO. 10 SCREW)
		[1]	TERMINAL AS
	125-7876 E		TUBE-HEAT SHRINK (17.78-MM DIA)(5-CM)
	9X-1055	[4]	TERMINAL-RECEPTACLE (12-GA)
	9X-1056	[2]	TERMINAL-RECEPTACLE (14-GA TO 16-GA)
	100-5041	[2]	TERMINAL-RECEPTACLE (18-GA TO 20-GA)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)
	125-7876 E		TUBE-HEAT SHRINK (17.78-MM DIA)(8-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)
7.	104-6202	[1]	CLIP (LADDER)
8.	141-5453 M	[1]	BOLT (M14X1.5X30-MM)
9.	1H-3244	[1]	LOCKWASHER
10.	208-9277 M	[2]	BOLT-FLANGE HEAD (M6X1X20-MM)
12.	3S-2093	[3]	STRAP-CABLE
13.	4P-8134	[1]	CLIP (LADDER)
14.	5C-2874 M	[2]	NUT (M5X0.8-THD)
15.	5C-2890 M	[1]	NUT (M6X1-THD)
16.	5C-7261 M	[1]	NUT (M8X1.25-THD)
17.	5P-4116	[1]	WASHER-HARD (8.8X20.5X2-MM THK)
18.	8F-7242	[1]	WASHER (8.7X15.9X1.6-MM THK)
19.	6C-9081	[2]	LOCKWASHER
20.	4B-4274	[2]	WASHER (5.5X13X1.2-MM THK)
21.	7P-1695	[1]	WASHER (10.5X19X3-MM THK)
22.	8T-4122	[1]	WASHER-HARD (17X32X3.5-MM THK)
23.	8T-4133 M	[1]	NUT (M10X1.5-THD)
25.	8T-4200 M	[1]	BOLT (M8X1.25X16-MM)
26.	1A-8912	[1]	WASHER (6.7X12.7X1.6-MM THK)
27.	3F-9556	[1]	LOCKWASHER
28.	178-3620	[1]	STRAP-DUAL CLAMP
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP68610113

328-2338: WIRING GP-ENGINE

WIRING GP-ENGINE

328-2338 WIRING GP-ENGINE
S/N AS21-UP
PART OF 326-5360 INSTALLATION AR-ENGINE
Type 2
ALSO AN ATTACHMENT

i07232278 SEBP6861

For full view, you need register

Parts for your 226B3 SKID STEER LOADER:

Pos.	Part No	Qty	Parts name
1.	3S-2093 C	[4]	STRAP-CABLE
2.	7G-1060	[1]	STRAP AS-GROUND
3.	7K-1181 C	[8]	STRAP-CABLE
4.	115-1615	[1]	RELAY AS (12-VOLT)(START)
4A.	115-1615	[1]	RELAY AS (12-VOLT)(COLD START)
5.	172-9200	[1]	SUPPRESSOR-ARC
6.	539-5879 CY	[1]	HARNESS AS-ENGINE
7.	539-5880 C	[1]	CABLE AS-POSITIVE
	8N-0869	[1]	COVER-TERMINAL (RED)
	8N-1725	[1]	COVER AS-TERMINAL (RED)
	8T-9758	[1]	TERMINAL AS (POSITIVE)
	1M-6119	[1]	BOLT (5/16-18X1.375-IN)
	1M-6120	[1]	NUT (5/16-18-THD)
	030-1708	[1]	TERMINAL-RING (0-GA)
	159-8047 E		CABLE-ELECTRICAL (0-GA, RED)(33-CM)
8.	104-6202	[1]	CLIP (LADDER)
9.	141-5453 M	[1]	BOLT (M14X1.5X30-MM)
10.	1A-8912 C	[2]	WASHER (6.7X12.7X1.6-MM THK)
11.	1H-3244	[1]	LOCKWASHER
12.	208-9277 M	[2]	BOLT-FLANGE HEAD (M6X1X20-MM)
13.	3F-9556	[1]	LOCKWASHER
14.	4B-4274	[2]	WASHER (5.5X13X1.2-MM THK)
15.	4P-8134	[1]	CLIP (LADDER)
16.	5C-2874 M	[2]	NUT (M5X0.8-THD)
17.	5C-2890 CM	[2]	NUT (M6X1-THD)
18.	5C-7261 CM	[2]	NUT (M8X1.25-THD)
19.	5P-4116	[1]	WASHER-HARD (8.8X20.5X2-MM THK)
20.	1H-0159	[2]	LOCKWASHER
21.	7P-1695	[1]	WASHER (10.5X19X3-MM THK)
22.	8F-7242 C	[2]	WASHER (8.7X15.9X1.6-MM THK)
23.	8T-4122	[1]	WASHER-HARD (17X32X3.5-MM THK)
24.	8T-4133 M	[1]	NUT (M10X1.5-THD)
25.	8T-4200 M	[1]	BOLT (M8X1.25X16-MM)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP68610114

230-3743: WIRING GP-HORN

WIRING GP-HORN

230-3743 WIRING GP-HORN -WITH MOUNTING
S/N AS21-UP
PART OF 326-5287, 326-5297, 326-5487, 326-5527 CONVERSION AR-MACHINE
AN ATTACHMENT

i01951899 SEBP6861

For full view, you need register

Parts for your 226B3 SKID STEER LOADER:

Pos.	Part No	Qty	Parts name
1.	3S-2093	[5]	STRAP-CABLE
2.	8T-4186 M	[1]	BOLT (M10X1.5X40-MM)
3.	142-8833	[1]	SPACER (11X14.3X9-MM THK)
4.	8T-4133 M	[1]	NUT (M10X1.5-THD)
5.	186-3362	[1]	HARNESS AS-CHASSIS (HORN)
	9X-3401	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	9X-3402	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[2]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
6.	8T-4121	[3]	WASHER-HARD (11X21X2.5-MM THK)
	M		METRIC PART

#SEBP68610115

328-2342: WIRING GP-MACHINE

WIRING GP-MACHINE

328-2342 WIRING GP-MACHINE -DEMAND FAN
S/N AS21-UP
PART OF 326-5287, 326-5297, 326-5487, 326-5527 CONVERSION AR-MACHINE
AN ATTACHMENT

i03901814 SEBP6861

For full view, you need register

Parts for your 226B3 SKID STEER LOADER:

Pos.	Part No	Qty	Parts name
1.	328-2341	[1]	HARNESS AS-SOLENOID (DEMAND FAN)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8730	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
2.	3S-2093	[5]	STRAP-CABLE
3.	4P-8134	[1]	CLIP (LADDER)
4.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
5.	8T-4133 M	[1]	NUT (M10X1.5-THD)
	M		METRIC PART

#SEBP68610116

373-6255: WIRING GP-WORK TOOL

WIRING GP-WORK TOOL

373-6255 WIRING GP-WORK TOOL
S/N AS21-UP
PART OF 378-5382 HYDRAULIC AR
AN ATTACHMENT

i04503913 SEBP6861

3736255 WIRING GP-WORK TOOL Parts scheme

For full view, you need register

Parts for your 226B3 SKID STEER LOADER:

Pos.	Part No	Qty	Parts name
1.	3S-2093	[15]	STRAP-CABLE
2.	7K-1181	[3]	STRAP-CABLE
3.	142-8633	[1]	SWITCH AS-ROCKER (ELECTRIC POWER, WORK TOOL)
	111-7899	[1]	GASKET
4.	146-9439	[5]	RELAY AS (12-VOLT)(WORK TOOL)
5.	159-9495	[1]	NUT (1-1/2-18-THD)
6.	178-3620	[1]	STRAP-DUAL CLAMP
7.	356-6115	[1]	HARNESS AS-WORK TOOL
	156-1458	[1]	COVER
	8T-8729	[6]	PIN-CONNECTOR (16-GA TO 18-GA)
	9W-0852	[11]	PIN-CONNECTOR (14-GA TO 16-GA)
	8T-8737	[5]	PLUG-SEAL
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	344-6145	[1]	RECEPTACLE AS (14-PIN)
	317-1204 E		SLEEVE (149-CM)
	2L-8079	[1]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
8.	375-6445 Y	[1]	HARNESS AS-WORK TOOL
9.	392-0186 Y	[1]	HARNESS AS-WORK TOOL (HIGH FLOW)
10.	159-9496	[1]	LOCKWASHER
	E		ORDER BY THE CENTIMETER
	Y		SEPARATE ILLUSTRATION

#SEBP68610117

375-6446: WIRING GP-WORK TOOL

WIRING GP-WORK TOOL

375-6446 WIRING GP-WORK TOOL -STANDARD FLOW
S/N AS21-UP
PART OF 326-5272 CONTROL AR-MACHINE
AN ATTACHMENT

i04507454 SEBP6861

3756446 WIRING GP-WORK TOOL Parts scheme

For full view, you need register

Parts for your 226B3 SKID STEER LOADER:

Pos.	Part No	Qty	Parts name
1.	3S-2093	[15]	STRAP-CABLE
2.	142-8633	[1]	SWITCH AS-ROCKER (ELECTRIC POWER, WORK TOOL)
	111-7899	[1]	GASKET
3.	146-9439	[5]	RELAY AS (12-VOLT)(WORK TOOL)
4.	159-9495	[1]	NUT (1-1/2-18-THD)
5.	178-3620	[1]	STRAP-DUAL CLAMP
6.	159-9496	[1]	LOCKWASHER
7.	375-6444 Y	[1]	HARNESS AS-WORK TOOL
8.	7K-1181	[3]	STRAP-CABLE
	Y		SEPARATE ILLUSTRATION

#SEBP68610118

142-8758: AXLE GP

AXLE GP

142-8758 AXLE GP
S/N AS21-UP
PART OF 261-6255 AXLE GP
ALSO AN ATTACHMENT

i01063995 SEBP6861

For full view, you need register

Parts for your 226B3 SKID STEER LOADER:

Pos.	Part No	Qty	Parts name
1.	142-8723	[1]	HOUSING-AXLE
2.	142-8724	[1]	SPINDLE-WHEEL
3.	142-8729	[1]	SPACER (50.8X63.5X32-MM THK)
4.	150-4385	[2]	CONE
5.	150-4386	[2]	CUP
6.	150-5472	[1]	SEAL-LIP TYPE
7.	159-5772	[8]	STUD (9/16-18X1.625-IN)
8.	166-3678	[1]	SEAL-LIP TYPE

#SEBP68610119

261-6255: AXLE GP

AXLE GP

261-6255 AXLE GP
S/N AS21-UP
PART OF 326-4781 CHASSIS AR
ALSO AN ATTACHMENT

i02476310 SEBP6861

For full view, you need register

Parts for your 226B3 SKID STEER LOADER:

Pos.	Part No	Qty	Parts name	Comments
	142-8758 Y	[4]	AXLE GP
	Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Operation and Maintenance Manual

Battery or Battery Cable - Inspect/Replace
216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders, 247B3 and 257B3 Multi Terrain Loaders and 259B3 Compact Track Loader

Fuses - Replace
216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders, 247B3 and 257B3 Multi Terrain Loaders and 259B3 Compact Track Loader

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Tool Operating Manual

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Systems Operation

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Testing and Adjusting

Electric Starting System - Test
C1.1, C1.5 and C2.2 Engines for Caterpillar Built Machines

Electrical Connector - Inspect
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Machine Electronic Control System

Wiring Harness (Short Circuit) - Test
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Machine Electronic Control System

Wiring Harness (Open Circuit) - Test
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Machine Electronic Control System

Troubleshooting

Power Supply Circuit of Electronic Control Module
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Machine Electronic Control System

MID 039 - CID 0070 - FMI 03
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Machine Electronic Control System

MID 039 - CID 0070 - FMI 04
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Machine Electronic Control System

MID 039 - CID 0490 - FMI 03
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Machine Electronic Control System

MID 039 - CID 0490 - FMI 04
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Machine Electronic Control System

Connector Locations
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Machine Electronic Control System

Indicator Lamp Does Not Illuminate During the Power Up Self Test
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Machine Electronic Control System

Indicator Lamp Is On Continuously
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Machine Electronic Control System

Switch Circuits
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Machine Electronic Control System

MID 039 - CID 1627 - FMI 04
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Machine Electronic Control System

MID 039 - CID 1627 - FMI 05
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Machine Electronic Control System

MID 039 - CID 1627 - FMI 06
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Machine Electronic Control System

Service Magazine

Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>®</SUP> Product {1463}
2014/03/04

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

An Improved Backup Alarm is Used on Certain K-Series Small Wheel Loaders and B3 Series SSL/MTL/CTLs {1408, 7051}
An Improved Backup Alarm is Used on Certain K-Series Small Wheel Loaders and B3 Series SSL/MTL/CTLs {1408, 7051}