HYDRAULIC SYSTEM
VALVE GP-PILOTOPERATOR STATION
AIR CONDITIONER GPCONSOLE GP
DOOR GP
HYDRAULIC SYSTEM
VALVE GP-PILOT
#SEBP68610570
326-5264: CONTROL GP-PILOT OPERATED HYD
326-5264 CONTROL GP-PILOT OPERATED HYD
S/N AS21-UP
PART OF 326-5270 CONTROL AR-MACHINE
AN ATTACHMENT
S/N AS21-UP
PART OF 326-5270 CONTROL AR-MACHINE
AN ATTACHMENT
For full view, you need register
Parts for your 226B3 SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 218-6421 | [1] | BRACKET AS | |
| 2. | 218-6490 Y | [1] | CONTROL GP-HANDLE (WORK TOOL) | |
| 3. | 237-5332 | [1] | FILM-INSTRUCTION (MACHINE CONTROLS) | |
| 4. | 299-9119 Y | [1] | VALVE GP-PILOT (WORK TOOL) | |
| 5. | 8T-0269 M | [3] | BOLT-SOCKET HEAD (M6X1X20-MM) | |
| 6. | 8T-4205 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 7. | 034-1432 | [1] | STRAP-CABLE | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP68610571
326-5265: CONTROL GP-PILOT OPERATED HYD
326-5265 CONTROL GP-PILOT OPERATED HYD -AUXILIARY
S/N AS21-UP
PART OF 326-5271, 326-5272 CONTROL AR-MACHINE
AN ATTACHMENT
S/N AS21-UP
PART OF 326-5271, 326-5272 CONTROL AR-MACHINE
AN ATTACHMENT
For full view, you need register
Parts for your 226B3 SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 218-6421 | [1] | BRACKET AS | |
| 2. | 231-4260 Y | [1] | CONTROL GP-HANDLE (RH) | |
| 3. | 235-5243 | [1] | FILM-INSTRUCTION (MACHINE CONTROLS) | |
| 4. | 299-9119 Y | [1] | VALVE GP-PILOT (WORK TOOL) | |
| 5. | 095-1207 M | [1] | NUT (M12X1.75-THD) | |
| 6. | 8T-0269 M | [3] | BOLT-SOCKET HEAD (M6X1X20-MM) | |
| 7. | 8T-4205 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 8. | 034-1432 | [1] | STRAP-CABLE | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP68610572
326-5267: CONTROL GP-PILOT OPERATED HYD
326-5267 CONTROL GP-PILOT OPERATED HYD
S/N AS21-UP
PART OF 326-5272 CONTROL AR-MACHINE, 378-5382 HYDRAULIC AR
Type 1
AN ATTACHMENT
S/N AS21-UP
PART OF 326-5272 CONTROL AR-MACHINE, 378-5382 HYDRAULIC AR
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 226B3 SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 218-6422 | [1] | BRACKET AS | |
| 2. | 235-5246 | [1] | FILM-INSTRUCTION (MACHINE CONTROL, READ OMM) | |
| 3. | 356-5008 Y | [1] | VALVE GP-PILOT (DIRECTION, SPEED) | |
| 4. | 095-1207 M | [1] | NUT (M12X1.75-THD) | |
| 5. | 164-9425 | [1] | HORN AS (12-VOLT, LOW TONE) | |
| 6. | 231-4258 Y | [1] | CONTROL GP-HANDLE (LH) | |
| 7. | 8T-0269 M | [3] | BOLT-SOCKET HEAD (M6X1X20-MM) | |
| 8. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 9. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 10. | 8T-4205 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP68610573
326-5267: CONTROL GP-PILOT OPERATED HYD
326-5267 CONTROL GP-PILOT OPERATED HYD
S/N AS21-UP
PART OF 326-5272 CONTROL AR-MACHINE, 378-5382 HYDRAULIC AR
Type 2
AN ATTACHMENT
S/N AS21-UP
PART OF 326-5272 CONTROL AR-MACHINE, 378-5382 HYDRAULIC AR
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 226B3 SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 218-6422 | [1] | BRACKET AS | |
| 2. | 235-5246 | [1] | FILM-INSTRUCTION (MACHINE CONTROL, READ OMM) | |
| 3. | 356-5008 CY | [1] | VALVE GP-PILOT (DIRECTION, SPEED) | |
| 4. | 095-1207 M | [1] | NUT (M12X1.75-THD) | |
| 5. | 164-9425 | [1] | HORN AS (12-VOLT, LOW TONE) | |
| 6. | 231-4258 Y | [1] | CONTROL GP-HANDLE (LH) | |
| 7. | 8T-0269 M | [3] | BOLT-SOCKET HEAD (M6X1X20-MM) | |
| 8. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 9. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 10. | 8T-4205 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 11. | 034-1432 | [1] | STRAP-CABLE | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP68610574
343-5542: CONTROL GP-PILOT OPERATED HYD
343-5542 CONTROL GP-PILOT OPERATED HYD
S/N AS21-UP
PART OF 326-5271 CONTROL AR-MACHINE
AN ATTACHMENT
S/N AS21-UP
PART OF 326-5271 CONTROL AR-MACHINE
AN ATTACHMENT
For full view, you need register
Parts for your 226B3 SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 095-1207 M | [1] | NUT (M12X1.75-THD) | |
| 2. | 218-6422 | [1] | BRACKET AS | |
| 3. | 356-5008 Y | [1] | VALVE GP-PILOT (DIRECTION, SPEED) | |
| 4. | 164-9425 | [1] | HORN AS (12-VOLT, LOW TONE) | |
| 5. | 231-4256 Y | [1] | CONTROL GP-HANDLE (LH) | |
| 6. | 235-5246 | [1] | FILM-INSTRUCTION (MACHINE CONTROL, READ OMM) | |
| 7. | 8T-0269 M | [3] | BOLT-SOCKET HEAD (M6X1X20-MM) | |
| 8. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 9. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 10. | 8T-4205 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP68610575
343-5543: CONTROL GP-PILOT OPERATED HYD
343-5543 CONTROL GP-PILOT OPERATED HYD
S/N AS21-UP
PART OF 326-5270 CONTROL AR-MACHINE
AN ATTACHMENT
S/N AS21-UP
PART OF 326-5270 CONTROL AR-MACHINE
AN ATTACHMENT
For full view, you need register
Parts for your 226B3 SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 218-6422 | [1] | BRACKET AS | |
| 2. | 218-6485 Y | [1] | CONTROL GP-HANDLE (LH) | |
| 3. | 356-5008 Y | [1] | VALVE GP-PILOT (DIRECTION, SPEED) | |
| 4. | 164-9425 | [1] | HORN AS (12-VOLT, LOW TONE) | |
| 5. | 237-5331 | [1] | FILM-INSTRUCTION (MACHINE CONTROL, READ OMM) | |
| 6. | 8T-0269 M | [3] | BOLT-SOCKET HEAD (M6X1X20-MM) | |
| 7. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 8. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 9. | 8T-4205 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP68610576
375-6443: CONTROL GP-PILOT OPERATED HYD
375-6443 CONTROL GP-PILOT OPERATED HYD
S/N AS21-UP
PART OF 378-5382 HYDRAULIC AR
AN ATTACHMENT
S/N AS21-UP
PART OF 378-5382 HYDRAULIC AR
AN ATTACHMENT
For full view, you need register
Parts for your 226B3 SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 146-9439 | [1] | RELAY AS (12-VOLT)(WORK TOOL) | |
| 2. | 218-6421 | [1] | BRACKET AS | |
| 3. | 231-4259 Y | [1] | CONTROL GP-HANDLE (RH) | |
| 4. | 262-7668 B | [1] | FILM-INSTRUCTION (MACHINE CONTROL, READ OMM) | |
| -OR- | ||||
| 270-8667 B | [1] | FILM-INSTRUCTION (MACHINE CONTROL, READ OMM) | ||
| 5. | 299-9119 Y | [1] | VALVE GP-PILOT (WORK TOOL) | |
| 6. | 095-1207 M | [1] | NUT (M12X1.75-THD) | |
| 7. | 8T-0269 M | [3] | BOLT-SOCKET HEAD (M6X1X20-MM) | |
| 8. | 8T-4205 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 9. | 034-1432 | [1] | STRAP-CABLE | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP68610577
276-5708: COUPLING GP-DRIVE
276-5708 COUPLING GP-DRIVE -REFRIGERANT COMPRESSOR, MOTOR
S/N AS21-UP
PART OF 218-6832 COMPRESSOR & MOTOR GP-REFRIG
AN ATTACHMENT
S/N AS21-UP
PART OF 218-6832 COMPRESSOR & MOTOR GP-REFRIG
AN ATTACHMENT
For full view, you need register
#SEBP68610578
218-6419: COVER GP-CONSOLE
218-6419 COVER GP-CONSOLE -WITHOUT AIR CONDITIONER, HEATER
S/N AS21-UP
PART OF 356-1932 INSTALLATION GP-COVER & LINES
AN ATTACHMENT
S/N AS21-UP
PART OF 356-1932 INSTALLATION GP-COVER & LINES
AN ATTACHMENT
For full view, you need register
Parts for your 226B3 SKID STEER LOADER:
CATERPILLAR SIS#SEBP68610579
218-6440: DOOR & MTG GP-CAB
218-6440 DOOR & MTG GP-CAB -POLYCARBONATE
S/N AS21-UP
CANNOT BE USED WITH @@@@@218-6400@@@@@, @@@@@223-0600@@@@@
AN ATTACHMENT
S/N AS21-UP
CANNOT BE USED WITH @@@@@218-6400@@@@@, @@@@@223-0600@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 226B3 SKID STEER LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 125-3518 E | SEAL (6-CM EACH) | ||
| 1A. | 125-3518 E | SEAL (65-CM) | ||
| 3. | 144-0195 E | HOSE (40-CM) | ||
| 4. | 5P-9909 D | SEAL (0.05-M EACH) | ||
| 5. | 5P-0372 | [2] | LOCK PIN | |
| 6. | 8T-2444 | [2] | STUD-BALL | |
| 7. | 8T-3848 | [1] | STRIKER AS-LATCH | |
| 6V-4270 | [1] | LOCKWASHER | ||
| 8. | 9C-5344 | [1] | SPACER (10.5X20X18-MM THK) | |
| 9. | 095-1325 | [1] | PIN-CLEVIS | |
| 10. | 153-2683 | [1] | SPRING AS-GAS (LOCKING) | |
| 11. | 177-3405 | [1] | PIN | |
| 12. | 218-0728 | [2] | SPRING | |
| 13. | 276-3440 CY | [1] | DOOR GP-CAB (POLYCARBONATE) | |
| 14. | 219-9739 | [1] | TANK AS-WINDOW WASHER | |
| 15. | 221-3877 | [1] | HARNESS AS-WINDOW WIPER | |
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 123-7615 | [1] | CONNECTOR (1-PIN) | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 5W-1987 | [2] | TERMINAL-BLADE (12-GA TO 16-GA) | ||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| 9X-3401 | [5] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [5] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 194-5226 | [6] | WIRE AS (16-GA) | ||
| -OR- | ||||
| 194-5227 | [6] | WIRE AS (14-GA) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 16. | 280-1575 | [1] | PLATE AS | |
| 17. | 223-0591 | [1] | PLATE AS | |
| 18. | 223-0601 | [2] | PLATE AS | |
| 19. | 223-0608 | [1] | HINGE AS | |
| 20. | 223-0617 | [1] | MOUNT | |
| 21. | 230-3214 | [1] | SPRING AS-GAS (CAB DOOR) | |
| 22. | 127-2170 M | [8] | SCREW-TRUSS HEAD (M8X1.25X20-MM) | |
| 23. | 142-9356 | [1] | BLOCK | |
| 24. | 195-0937 M | [8] | INSERT-THREADED (M8X1.25-THD) | |
| 25. | 3S-2093 | [3] | STRAP-CABLE | |
| 26. | 5C-2890 M | [13] | NUT (M6X1-THD) | |
| 27. | 5P-5969 D | SEAL (1.1-M EACH) | ||
| 28. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 29. | 8T-4133 M | [4] | NUT (M10X1.5-THD) | |
| 30. | 8T-4205 | [13] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 31. | 8T-4222 | [1] | WASHER-PLATED (11X32X2.5-MM THK) | |
| 32. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 33. | 9X-2041 M | [4] | SCREW-TRUSS HEAD (M10X1.5X20-MM) | |
| 34. | 9X-2044 M | [3] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 35. | 9X-2045 M | [4] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 36. | 5P-8309 D | SEAL (0.8-M) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
HYDRAULIC SYSTEM
VALVE GP-PILOT
Specifications
Pilot Operated Hydraulic Control
259B3 Compact Track Loader, 247B3 and 257B Series 3 Multi Terrain Loaders and 216B Series 3, 226B3, 236B3, 242B Series 3 and 252B Series 3 Skid Steer Loaders
259B3 Compact Track Loader, 247B3 and 257B Series 3 Multi Terrain Loaders and 216B Series 3, 226B3, 236B3, 242B Series 3 and 252B Series 3 Skid Steer Loaders
Pilot Operated Hydraulic Control - Hydrostatic
259B3 Compact Track Loader, 247B3 and 257B Series 3 Multi Terrain Loaders and 216B Series 3, 226B3, 236B3, 242B Series 3 and 252B Series 3 Skid Steer Loaders
259B3 Compact Track Loader, 247B3 and 257B Series 3 Multi Terrain Loaders and 216B Series 3, 226B3, 236B3, 242B Series 3 and 252B Series 3 Skid Steer Loaders
Pilot Operated Hydraulic Control
259B3 Compact Track Loader, 247B3 and 257B Series 3 Multi Terrain Loaders and 216B Series 3, 226B3, 236B3, 242B Series 3 and 252B Series 3 Skid Steer Loaders
259B3 Compact Track Loader, 247B3 and 257B Series 3 Multi Terrain Loaders and 216B Series 3, 226B3, 236B3, 242B Series 3 and 252B Series 3 Skid Steer Loaders
Pilot Operated Hydraulic Control
259B3 Compact Track Loader, 247B3 and 257B Series 3 Multi Terrain Loaders and 216B Series 3, 226B3, 236B3, 242B Series 3 and 252B Series 3 Skid Steer Loaders
259B3 Compact Track Loader, 247B3 and 257B Series 3 Multi Terrain Loaders and 216B Series 3, 226B3, 236B3, 242B Series 3 and 252B Series 3 Skid Steer Loaders
Pilot Operated Hydraulic Control
259B3 Compact Track Loader, 247B3 and 257B Series 3 Multi Terrain Loaders and 216B Series 3, 226B3, 236B3, 242B Series 3 and 252B Series 3 Skid Steer Loaders
259B3 Compact Track Loader, 247B3 and 257B Series 3 Multi Terrain Loaders and 216B Series 3, 226B3, 236B3, 242B Series 3 and 252B Series 3 Skid Steer Loaders
Disassembly and Assembly
Pilot Operated Hydraulic Control - Remove
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Machine Systems
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Machine Systems
Pilot Operated Hydraulic Control - Install
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Machine Systems
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Machine Systems
Pilot Operated Hydraulic Control - Disassemble
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Machine Systems
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Machine Systems
Pilot Operated Hydraulic Control - Assemble
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Machine Systems
259B3 Compact Track Loader, 247B3 and 257B3 Multi Terrain Loaders and 216B3, 226B3, 236B3, 242B3 and 252B3 Skid Steer Loaders Machine Systems
Caterpillar Parts SIS Catalog 226B3 :
Truck sale:
33,000
Caterpillar 226B3, Skid Steer Loaders, Construction
- Skid Steer Loaders
MOHAMED ABDULRAHMAN AL-BAHAR
- Skid Steer Loaders
MOHAMED ABDULRAHMAN AL-BAHAR